Standing Seam Roof Anchor SSRA1

FREE GROUND OR 2-DAY SHIPPING OPTIONS!

Standing Seam Roof Anchor SSRA1 - Fits 95% Of Today's Standing Seam Profiles!

SSRA1 allows homeowners, building owners, and contractors to work safely on standing seam roofs without penetrating the panels. Engineered to revolutionize fall protection anchorage attachment on standing seam roofs.

The SSRA1 was recently subjected to Ultimate Failure testing at an independent ISO 17025/ANSI Z359.18 certified materials testing facility. The results far exceeded our expectations and our competitor’s strength. The maximum testing protocol for OSHA and ANSI is 5,000 lbs, however the SSRA1 was subjected to 14,500 lbs of load. The test was concluded when the Grade 8 top bolts sheared leaving the aluminum anchor body completely unharmed or bent. This incredible strength is due to the patented structural design of the anchor body. This puts the SSRA1 in a class of it’s own!

Included:

• 6061-T6 Aluminum Body- patented universal fit design
• 5,000 lbs certified D-Ring
• 12 stainless steel, Cupped Tip set screws w/ 3/16" hex/allen bit
• Lifetime Life Saving Warranty
• Owner's Manual
• For short term anchor attachment, we recommend using the optional Nylon Tipped Set Screws for less chance of seam scratching.

Cut Sheet 
Spec Sheet 
Owner's Manual