Filter Result By



Supervac 718G4-H, Gas PPV, Honda GX

Supervac 718G4-H, Gas PPV, Honda GX

Manufacturer: Supervac

Product Code: 718G4-H

Supervac 718G4-H, Gas PPV, Honda GX

a PPV fan powered by a Honda GX engine - unmatched durability, firefighter friendly features and a perfect combination of small size and power. most popular size - ideal for departments with a mixture of residential and small commercial structures in their district.



  • 7 Point Cast Aluminum Airfoil Blade ‹› holds up better than plastic in high heat
  • Precision Spun Steel Shroud ‹› durability with maximum airflow
  • Full Roll Cage Aluminum Frame ‹› protects key components
  • Flat Proof Tires ‹› heavy duty rubber, never flat, rolls up stairs and curbs
  • 4 Position Tilt Plate ‹› tilt shroud to 4 angles (20°, 10°, 0 °, -10°)
  • Step Brake System ‹› foot pedal locks fan in place
  • Air Cone Guard ‹› classic design, StreamShaper Guard optional
  • Fold Down Handle ‹› folds down within frame for easy, compact storage
  • Compatible With SuperVac Accessories: Spiral Duct, LED Holder, Light Kit, Foam Generator, Exhaust Extension, Mountain Mister
  • 5 Year Warranty



  • Engine ‹› Honda GX200
  • Displacement ‹› 196 cc
  • HxWxD ‹› 22” x 23.5” x 19.5” ‹› 559mm x 597mm x 495mm
  • Blade Diameter ‹› 18” ‹› 457mm
  • Weight ‹› 82 lbs ‹› 37 kg
  • RPM ‹› 3535
  • Output ‹› 15,590 cfm ‹› 26,485 cmh



A Super Vac, part number #718G4-H, 18" gas positive pressure ventilator shall be supplied. The unit shall be cart style designed with rear mounted pneumatic wheels, a full height frame, and a tilt-up, full width handle for easy positioning and rapid deployment. All components of the positive pressure ventilator shall 100% manufactured and assembled in the United States.

The pneumatic wheels shall be designed with a "one step" braking system utilizing a single foot operated brake pedal to assure positive engagement to prevent the unit from rolling during operation. The unit shall remain stationary while running at full speed.

The entire frame of the unit shall be constructed of steel that shall surround the shroud and the seven-blade 18" airfoil propeller in a roll cage design that shall enhance lifting and user safety. The blade shall be constructed of precision cast of aluminum alloy #A356. The blade shall be driven by the gas engine that shall have a direct drive connection. The blade shall be precision balanced and attached to the engine shaft with a split taper-lock bushing. Any ventilators utilizing belts, pulley, gears, or additional shafts shall not be acceptable.

The shroud and the safety grill shall be designed as to provide maximum air velocity. The positive pressure ventilator shall have a tilt control with four positions including one position that can direct airflow downward. The standard angle of air direction shall be 18 degrees above horizontal ground level and shall be equipped with a lever to set positions of the air flow to 20, 10, 0, and -10 degrees above and below horizontal level.

The front and rear safety guards shall be designed to OSHA and U.L. Standards to prevent accidental contact with the blade. The unit shall be tested to AMCA 240-95 for air movement and the air movement shall exceed 15,600 cubic feet per minute.

The positive pressure ventilator shall have a minimum five (5) year warranty. The engine shall be warranted by the engine manufacturer for a minimum of two (2) years.

Related Categories

Request a Quote Now

Request a Quote X

Your Name*
Please let us know your name.

Company Name
Invalid Input

Your Email*
Please let us know your email address.

Invalid Input

Please enter valid Product/Category

Product Url
Enter valid Product Url

Please let us know your message.

Captcha   RefreshPlease enter the right CAPTCHA