Nolan's model CS-70 is a double-end, hinged-type car stop designed for permanent installation on exposed rails. CS-70 Car Stops have the lightener hole design. The hinged car stop is therefore lightweight while still functioning as a stop for rail cars that could potentially roll. When raised, the CS-70 car stop protects workers, warehouse doors, or crossover walks by stopping a rolling car. When lowered, it swings flat to the track, out of the way. The car stop may be padlocked (padlock not included) in either the up or down position.
IMPORTANT NOTE: CS-70 Car Stops are sold per unit, but must be used in pairs -- a pair consists of one right-hand stop and one left-hand stop.
| MODEL # | HEIGHT ABOVE RAIL | RAIL SIZE | WEIGHT |
| CS-70L | 15'' | 4-1/4" to 7-7/16" | 135 lbs. each |
| CS-70R | (381 mm) | (60-141 lb) | (61 kg) |
The CS-60 is a hinged-type car stop designed for permanent installation on exposed rails. In the raised position, the CS-60 protects workers, warehouse doors, crossover walks, etc., or it swings down out of the way. The CS-60 may be padlocked in either the up or down position. (Padlock not included.)
IMPORTANT NOTE: CS-60 Car Stops are sold per unit, but must be used in pairs -- a pair consists of one right-hand stop and one left-hand stop.
| MODEL # | HEIGHT ABOVE RAIL | RAIL SIZE | WEIGHT |
| CS-60L | 15'' | Specify rail size | 91 lbs. each |
| CS-60R | (381 mm) | (41 kg) |
Nolan Model CS-50 Car Stops
The CS-50 is a clamp-type car stop designed for permanent or temporary installation on exposed rails. Used when heavy and expensive bumping posts are not required, the CS-50 is simple to handle and attach, and mounts with four 1'' (25 mm) diameter bolts and two wedgetype clamping plates (no drilling needed). CS-50 car stops can be removed when not needed. As the car bumps the CS-50, the wedge design tightens its hold on the rail.
IMPORTANT NOTE: CS-50 Car Stops are sold per unit, but must be used in pairs, that is, two CS-50s.
| MODEL # | HEIGHT ABOVE RAIL | RAIL SIZE | WEIGHT |
| CS-50 | 16-5/8" (422 mm) |
4-1/4" to 7-7/16" (60-141 lb) |
135 lbs. each (61 kg) |
(206) 264-0808
sales@westernsafety.com
