Filter Result By

Browse

Manufacturers

Enpac Railcar Track Pans

Enpac Railcar Track Pans

Manufacturer: Enpac

Product Code: 77235-BK

Enpac Railcar Track Pans

 

COMPLETE RAILROAD SPILL PROTECTION SYSTEM


ENPAC’s railcar track pans are a heavy-duty modular fiberglass system designed specifically for railroad spill containment. Contains small leaks as well as large spills without interfering with normal railcar operations. Simply connect multiple units to provide spill containment for hundreds of feet of railcar. Plumb drains to a remote holding tank to provide collection for large capacity spills. No removal of, or modification to your current track is required. Each pan fits tight against the rail and is secured in place with special weldment fasteners to create a low maintenance, money saving unit.

Typical installation requires (1) 4” PVC Manifold per unit. Connected units may all use (1) Manifold, though this configuration may result in reduced flow. Additional manifolds may be installed based on customer preference and optimized drainage.

 

RAIL CAR TRACK PANS

Part #  Description Dimensions L x W in. (cm) Weight lb. (kg) Spill Cap. gal. (L)
ENP500FS  20’Full System (1 Center Pan, 2 Outrigger Pans) See below for Pan Dimensions 400 (181.4) 470 (1779)
ENP500CP20 20’ Center Pan 20’ x 56.5 x 4 (6m x 17.2 x 10”) 200 (90.7) 220 (832.8)
ENP500OR20 20’ Outrigger Pan 20’ x 30 x 4 (6m x 9.1 x 10) 100 (45.4) 125 (473.2)
ENP4PVCMNFD 4” PVC Manifold      

Regulations: EPA 40 CFR 264.175, SPCC and NPDES

 

STINGER RAIL BERM™
 

THE EASIEST, PORTABLE RAIL SPILL CONTAINMENT BERM AVAILABLE.

Introducing the Stinger Rail Berm™, designed to provide portable spill containment and control for bottom loading and unloading rail tank cars!

This lightweight containment pad is designed to provide a temporary bermed containment area around the valves below a rail tank car during loading/unloading operations. At only 40 lb., it can be easily lifted into place by two operators!

The berm provides a 4’ x 4’ x 12” sump area that sits in the void between the tracks directly under the valves. Should a large release occur, captured liquid would begin to fill this berm. The spilled product would then be directed over the outside rail to an alternate compartment 4’ x 18” x 12” H. This outside compartment is fitted with two 2” drains that includes a male CAM-LOC fitting for quick coupling of system to hoses that can transport the spilled materials to a nearby containment area.

STINGER RAIL BERM™

Part #  Dimensions L x W in. (cm) Weight lb. (kg) Spill Cap. gal. (L)
48-RSB-FS ) 4 x 6 x 1 ( 1.83 x 1.22 x 30 cm) 40 (18.14) 120 (455

Regulations: EPA 40 CFR 264.175, SPCC and NPDES

 

RAIL CONTAINMENT MATS
 

Protect railway yards and other transportation facilities from leaks during maintenance. Designed specifically to fit between and along railway tracks, ENPAC Rail Containment Mats absorb liquids, drips and spills. Interior and exterior mats included. Custom sizes are also available.

 

RAIL CONTAINMENT MATS

Part #  Description Dimensions L x W in. (cm) Weight lb. (kg) Spill Cap. gal. (L) Quantity
477235-BK Rail Mat Kit Interior Mat - 56” X 35 (142cm x 10.7m) 27 (12.2) 30 (114) 1
    Exterior Mat - 16” X 35 (41cm x 10.7m) 7 (3.2) 10 (38) 1
Related Categories


Request a Quote Now

Request a Quote X

Your Name*
Please let us know your name.

Company Name
Invalid Input

Your Email*
Please let us know your email address.

Phone*
Invalid Input

Category*
Please enter valid Product/Category

Product Url
Enter valid Product Url

Comment
Please let us know your message.

Captcha*
Captcha   RefreshPlease enter the right CAPTCHA

Processing...