Western Cullen Hayes Page 3

For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.

Credit Card Images

Stationary (Walkout) Cantilevers
Stationary Walkout Cantilever

Service of equipment can be done quickly by railroad personnel working safely above the traffic. There is no need to tie up highways or employ specially equipped vehicles. Walkway arms and working platforms on cantilevers have non-slip safety grating to assure, safe footing under adverse weather conditions. Hand rail and grab irons are included for added safety. Anti-climb guards are provided to pre­vent vandals from climbing the cantilever.
Single mast construction is used with arm lengths 10' to 31'; double masts are used for 32' to 40' arms. Double mast spacing: 3'-0".
Use of the stationary cantilever provides im­proved locations for flashing light, directly in front of oncoming traffic. Highway safety and railroad safety is improved.

FEATURES:

  • Flashing lights can be placed above traffic in direct view of the motorist
  • 17'-6" road clearance above top of foundation
  • Railroad personnel can maintain equipment safely - without obstruct­ing highway traffic. Special vehicles are not required
  • Minimum maintenance is required
  • Aluminum Construction
  • 3/4" thick x 15" wide slotted aluminum walkway grating
  • Handrail 31" high with intermediate handrail at 18"
  • 17'-6" road clearance
  • Light and sign mounting brackets welded to the structure mast
  • Removable ladder guard
  • 10" dia. mast will be supplied with 10'-0" to 22'-0" arm
  • 12" dia. mast will be supplied with 24'-0" to 30'-0" arm
  • 12" and 10" diameter combination double mast supplied with 32'-0" to 40'-0" arm

Railroad Wheel Sensors and Amplifiers
Rail Wheel Sensor

• True 0 to 150 mph detection
• Unique, Non-Magnetic
• No-Touch Sensing of Wheels
• Can Determine Direction
• Compact Design

Our railroad wheel sensors and amplifiers are used in main line and yard applications. Dual head (directional) and single head (non-directional) sensors are available for axle counting, speed determination and presence detection. Other uses include actuation of scales, car identification systems, diesel washers, etc.
In rapid transit or commuter railroad applications the sensors can be used as a speed monitor or as backup for setting of signals. If installed at defined intervals, these devices can be used for position control in a master flow control system.
A variety of high and low speed amplifiers are available; contact Western-Cullen­Hayes for the product that is right for your application.

Principle of Operation

Coils inside the railroad wheel sensor are connected by two wires to a remote amplifier. When the wheel flange of the railroad car enters the high-frequency field of the electronic sensors, the sensor oscillators are dampened, resulting in a change of amplitude. This frequency shift is reflected back to the amplifier, which generates an optical coupler output.
Non-metallic materials such as oil, water, snow, ice, glass, plastic, rubber, etc., do not affect the operation of the internal sensors. Because the sensors are not magnetic, metal shavings will not accumulate on the housing.

Wheel Sensor Specifications
Single Head Sensor WCH Part No: 60-1009
Tiefenbach Part No: N59-1R-200-45
Dual Head Sensor WCH Part No: 50-0902
Tiefenbach Part No: 2N59-1R-200-45
Mounting: Mounted inside of the rail, 45 mm under the lower edge of the rail. Mounted by bolting to the rail web, or by a rail base clamp type mounting claw.
Actuation: The sensor is a NAMUR Proximity sensing type device which is actuated by the flange of the wheel passing over the sensor.
Rail Applications: 90RA, 100RE, 100RA, 100ASCE, 115RE, 119RE, 132RE, 136RE & 140RE.
Wheel Diameter Sensed: 300 to 1000 mm.
Wheel Flange Sensed: 20 to 36 mm.
Lateral Wheel Offset: Up to 50 mm.
Allowable Rail Wear: 18 mm total. After rail wear of 8 mm, the sensor is moved from the lower mounting holes to the upper mounting holes, or re-adjustment of the mounting claw is necessary.

Specifications:
The wheel sensor must be coupled with an external amplifier and power supply to achieve usable output. Contact Western-Cullen-Hayes with your output requirements and we will determine the proper amplifier for the application.
Sensing Speed: 0 to 150 mph depending on wheel diameter and amplifier type.
Static Sensing Distance: 47 mm, +2mm/-1mm
Hysteresis: =<2mm in direction of travel.
Repeat Precision: =<0.5mm nominal.
=<0.1mm with constant temperature.
Supply Voltage: 8.2 vdc
Load Un-Dampened: =>2.65ma
Load Dampened: =<1.45ma
Admissable Line Resistance:

=<50 Ohm total out and back length of wire run
Tested Breakdown Voltage: 2KV
Lightning Protection: 1.5KW @ l ms
Operating Temperature:

-40C to +80C

Starting Distance from Center of Sensor:
Single Head Sensor and Dual Head Sensor System I
300mm wheel = 120mm left, 50mm right
600mm wheel = 140mm left, 70mm right
1000mm wheel = 160mm left, 100mm right

Starting Distance from Center of Sensor:
Dual Head Sensor System II
300mm wheel = 120mm right, 50mm left
600mm wheel = 140mm right, 70mm left
1000mm wheel = 160mm right, 100mm left
Overlapping Distance from Center of Sensor: Dual Head Sensor
300mm wheel = 50mm left, right
600mm wheel = 70mm left, right
1000mm wheel = 100mm left, right

Physical Description
The sensor housing is constructed of polycarbonate synthetics and is resistant to ultraviolet, grease, oil, salt and certain acids, as well as being resistant to lightning strikes to the rail. The base of the sensor is constructed of brass. The standard cable supplied is 16 feet long, 18ga. Sitoflex and is encapsulated into the sensor.

Overall Dimensions: 7.25"L x 3"H x 3.5"D
Weight: 5.5lbs.

Mounting to Used Rail
Used Rail Mount Diagram
  1. Grind all overflow from the top and side of the rail head.
  2. To determine dimension "B", measure the height of the rail in millimeters at the lo­cation the sensor is to be placed. This will become dimension "C". Compare "C" to "A" as listed in the chart below.
  3. If "C" is from 1 to 5 millimeters less than "A", deduct the difference from dimension "B". Drill holes and install proper spacer plates.
  4. If "C" is from 6 to 10 millimeters less than "A", deduct 5 millimeters from dimension "B". Drill holes and install proper spacer plates.
  5. If "C" is more than 10 millimeters less than "A", do not attempt to mount the sensor. The rail is worn too far for sensor operation.

Rail Size

New Rail Height
(A) In mm

Mounting On New Rail

Measured Rail Wear In mm

Mounting Holes

Distance Plates

Distance Plate
Thickness

(Y)

(B)

(X)

(B)

90RA

142.9

45mm

86mm

>37

>72

Lower

None

 

<=37

<=72

Mounting Not Possible

100RE

152.4

45mm

86mm

>37

>72

Lower

Blue

1.5mm

<=37

<=72

Mounting Not Possible

100RA

152.4

45mm

86mm

>37

>72

Lower

Orange

1.0mm

<=37

<=72

Mounting Not Possible

115RE

168.3

45mm

86mm

>37

>72

Lower

None

 

<=37

<=72

Mounting Not Possible

119RE

173.0

45mm

86mm

>37

>72

Lower

Orange

1.0mm

<=37

<=72

Mounting Not Possible

132RE

181.0

45mm

86mm

>37

>72

Lower

Green

3.6mm

<=37

<=72

Upper

None

 

136RE

185.7

45mm

86mm

>37

>72

Lower

Orange/Gray

4.3+1.3mm

<=37

<=72

Upper

Blue

1.5mm

140RE

185.7

45mm

86mm

>37

>72

Lower

Orange/Orange 4.3+ 1.0mm

<=37

<=72

Upper

Brown

2.0mm

Wheel Sensor Products and Accessories
Single head rail wheel sensor. WCH Part No: 60-1009
Tiefenbach Part No: N59-1R-200-45
Dual head rail wheel sensor. WCH Part No: 50-0902
Tiefenbach Part No: 2N59-1R-200-45
Wheel sensor marking template. Center punches drilling location for single or dual head sensors on all rail sizes. WCH Part No: 60-3010
Wheel sensor mounting claw. Clamps to rail base. 4-wayadjustable. Brass construction. WCH Part No: 60-1100
Tiefenbach Part No: SSK-6
Terminal housing with 18" riser, terminal blocks and 3 ft. piece of 112" sealtite and fittings for connection of 1 wheel sensor to the field run. WCH Part No: 1155-161-E
Other configurations of field terminal housings available upon request.
Electronic sensing range adjustment device. For use with dual head sensor Part No. 2N59-1R-200-45 and single head sensor Part No. N59-1R-200-45. WCH Part No: 60-3042
Tiefenbach Part No: R58/37
Requires sensing range measurement device Part No. 60-3020, and battery charger Part No. 60-3059-1, purchased separately.
Sensing range measurement device. For use with dual head sensor,
Part No. 2N59-1R-200-45 and single head sensor Part No. N59-1R-200-45.		 WCH Part No: 60-3020
Tiefenbach Part No: SSPV-1
Battery charger for sensing range adjustment device. WCH Part No: 60-3059-1
Wheel Sensor Adjusting Tool. WCH Part No: 60-3060
Tiefenbach Part No: EW-1

Wheel Sensor Amplifiers
Wheel Sensor Amplifiers

Wheel Sensor Amplifier Specifications

Non-Directional, High-Speed Amplifier WCH Part No: 60-2004 Tiefenbach Part No: 4ABI0/II05/3

Switching Speed: 0-150 mph
Sensor Application: 4 - 60-1009 single head sensors
2 - 50-0902 dual head sensors
Specifcations:
Supply Voltage: 12VDC -101+20%
24VDC (special order)
Load: Normal operation: 80ma
Open condition: 170ma
Short condition and operation of test button: 280ma
Sensor Input:
Lightning Suppression: 1.5kw/1ms
No-Load Sensor Voltage: 8.0VDC ±2.5%
Voltage at Un-Dampened Sensor: <5.35V
Voltage at Dampened Sensor: >6.7V
Internal Resistance: 2500ohm±5%
Voltage at Make: 1.55V +5, -1%
Voltage at Break: 1.75V +1, -5%
Amplifier Outputs:

2 AZ and 2 AK outputs per sensor system.
1 fault output per 2 sensor systems.

Output Description:

AZ: Output starts 2ms after wheel sensed and ends 2ms after wheel passes.
AK: Output starts when wheel is sensed and ends 85ms after wheel passes.
Fault: Output on anytime a cable open or short is present. Red LED indication
Minimum AZ output time = 8ms ±5%
Minimum AK output time = 8ms ±5% + 85ms ±30%

All AZ and AK outputs activate when system test button is depressed. Amber LED illuminates when wheel is sensed and output is on.

Optocoupler Output Specifications: Electrically isolated between sensor inputs and supply voltage.
Switching Voltage: 0 - 80VDC with ICEO<50µA
Switching Load: 100ma
Voltage Drop: <1.5Vat 100 ma
Temperature: -40 to 65°C
<70% relative humidity
Dimensions: Eurocard standard
160 x 100 mm. front plate width = 5 hp.
Connections: 48 pin connector. Type F DIN41612

Requires single mounting box, WCH Part No: 60-2102, or mounting rack. Consult Western-Cullen-Hayes for information.
Over 50 different transducer amplifiers are available. Please call to discuss your special requirements

Wheel Sensor Amplifier Specifications

Directional, Low-Speed Amplifier WCH Part No: 60-2040 Tiefenbach Part No: 2ARB4/1204

Switching Speed: 0- 37 mph
Sensor Application: 1 - 50-0902 dual head sensor
Specifications:
Supply Voltage: 12VDC -101+20%
24VDC (special order)
Load: Normal operation: 40ma
Short condition and operation of test button: 90ma
Sensor Input:
Lightning Suppression: 1.5kw/1ms
No-Load Sensor Voltage: 8.0VDC ±2.5%
Current at Un-Dampened Sensor: >2.5ma
Current at Dampened Sensor: <1.45ma
Internal Resistance: 1000 - 2000 ohm ±5%
Current at Make:

1.55ma +5, -1 %

Current at Break: 1. 75ma + 1, -5%
Amplifier Outputs: 1 for sensor system I
1 for sensor system II
1 for direction I - II
1 for direction II - I
1 fault output
Output Description:
System Outputs:

Starts 2ms after wheel is sensed and ends 2ms after wheel passes.
Minimum output time 18ms ±2%

Directional 1 Output: Pulses at 50ms ±15%
After the following sequence occurs.
  1. Wheel covers system I
  2. Wheel covers system I and II
  3. Wheel un-covers system I
  4. Wheel un-covers system II

Reverse sequence for opposite direction
Fault output: Output on anytime a cable short or open is present. Red LED indication.
An amber LED illuminates when wheel is sensed and output is on. System test buttons located on front panel.
Optocoupler Output Specifications: Electrically isolated between sensor inputs and supply voltage.
Switching Voltage: 0 - 80VDC with ICEO<50µA
Switching Load:

100ma

Voltage Drop: <1.5Vat 100 ma
Temperature: -40 to 65°C
<70% relative humidity
Dimensions: Eurocard standard
160 x 100 mm. front plate width = 4 hp.
Connections: 48 pin connector. Type F DIN41612
Requires single mounting box, WCH Part No: 60-2102, or mounting rack. Consult Western-Cullen-Hayes for information.
Over 50 different transducer amplifiers are available. Please call to discuss your special requirements.

 

Highway Crossing Bells

Western-Cullen-Hayes manufactures a wide range of electronic and mechanical warning bells for every type of highway crossing application. Loud and soft tone hammers are available for the mechanical bells; while the electronic bell's volume can be easily adjusted on its solid state circuit board. All bells have an adjustable ringing rate.
Our bells are constructed of light weight, rust-proof cast aluminum, and are designed to offer years of extremely low maintenance service. Western-Cullen-Hayes crossing bells offer unsurpassed sound quality and intensity.

Highway Crossing Bells
Dimensions: Dimensions:
Height: 18 inches Height: 15 inches
Diameter: 6-1/2 inches Width: 14 inches
Weight: 10 pounds Depth: 7 inches
Decibels: 80-95 db at 10 feet in a 360º plane Weight: 27 pounds
Decibels: 90 db at 10 feet

Highway Crossing Bells - Models

Ref.

Description

Part Number

A

Model 0333, 6 - 16 VDC, 600 rnA

For 4" and 5" top of mast mount

0333 - CFR

For 6" top of mast mount

0333 - HR

For surface mount

0333 - ARP

For side of mast mount. Specify 4" or 5"

0333 - ARP - X

B

Model 0333-2, 6 - 16 VAC/VDC, 600 mA

For 4" and 5" top of mast mount

0333 - CFR - 2

For 6" top of mast mount

0333 - HR - 2

For surface mount

0333 - ARP - 2

For side of mast mount. Specify 4" or 5"

0333 - ARP - 2 - X

C

Model 0666, 105 - 125 VAC, 1.2 Amp.

For 4" and 5" top of mast mount

0666 - CFR

For 6" top of mast mount

0666 - HR

For surface mount

0666 - ARP

For side of mast mount. Specify 4" or 5"

0666 - ARP - X

D

Model 0777 electronic bell, 9-15VDC or AC, 150 rnA For 4" or 5" top of mast mount

0777-CFR

NOTE

For soft tone mechanical bell, add suffix -S

Model 0777 Parts List
Model 0777 Electronic Highway Crossing Bell

Reference

Description

Part No.

1

Electronic Bell Housing

1300

2

5/16"-18 x 1-1/4" Set Screw

DD-24-GG-3-0125

3

114"-20 x 1" Fillister Head Screw

BB-16-EE-3-01

4

Pinnacle

1l0-A-16

5

Speaker Mounting Plate

1300-5

6

10-32 x 5/8" Round Head Machine Screw

AA-10-DD-3-0062

7

#10 Lockwasher

RR-00-AH-3

8

#10-32 Hex Nut

JJ-12-DD-3

9

1/4"-20 Hex Nut

JJ-12-EE-3

10

Mounting Plate Support

1300-9

11

Speaker

1300-6

12

Bell Circuit Board

1300-8

13

6-32 x 1" Round Head Machine Screw

AA-10-AA-3-01

14

#6-32 Hex Nut

JJ-12-AA-3

15

#6 Lockwasher

RR-00-AF-3

16

Spacer

39-0054-1

17

M6 x 25mm Hex Head Bolt

1300-7

18

1/4" Lockwasher

RR-00-AJ-3

19

Terminal Strip

2507-2

20

Speaker Screen

1300-l2

21

Pinnacle Gasket (20" long)

3590-258

22

Cable Assembly

1300-14

23

5/16"-18 x 5/8" Hex Head Bolt

BB-12-GG-3-0062

24

AAR Washer

10708

25

AAR Clamp Nut

10707

26

White Marking Tag

16222-W

27

Binding Nut

10706

Model 0333 DC Highway Crossing Bell
Model 0333 DC Highway Crossing Bell

Ref.

Description

Part Number

1

Push Nut

970-45

2

Rain Shield

1208-CA

3

1/4" X 1-1/4" Clevis Pin

1209-16

5

Gong

1211

6

Movement Base Assembly

1215*

*

Movement Base Sub-Assembly

1209-1

*

Armature & Pins Sub-Assembly

1209-2

*

Operating Link

1209-4

*

1/4" x 2" Clevis Pin

1209-17

*

Contact Arm

1210-5

*

Resistor Sub-Assembly

1210-42

7

Oscillator & Hammer Assembly

1215-1**

**

Oscillator

1209-11

**

Hammer & Reinforcement Spring

1210-17

8

Cover Gasket

1217-2

9

Cover

1219-2-M

10

Case

1220-2-M

13

Dust Guard-Felt

1248-15-1

15

Contact Block Insulator

1249-16-1

16

Contact Block Assembly

1249-26-1

17

Coil & Core Assembly

1249-30

18

Cable Clamp

1953-30-1

19

Clamp Nut

10707

20

Terminal Strip

2508-69-3

21

Binding Nut

10706

22

Washer

10708

23

1/16" X 1/2" Cotter Pin

VV-00-AZ-3-005

24

1/16" X 3/8" Cotter Pin

VV -00-AZ- 3-0037

25

3/16" X 1" Clevis Pin

1209-15

26

10-32 X 1" Filister Screw

AA-16-DD-3-01

27

1/4"-20 X 7/8" Filister Screw

AA-16-EE-3-0087

28

.328" Brass Washer

PP-00-AK-8

29

5/16"-18 X 3/4" Hex Bolt

BB-12-GG-3-0062

30

5/16"-18 X 1" Hex Bolt

BB-12-GG-3-01

31

3/8" X 3-1/2" Rivet

1249-40

32

1/2"-13 X 7/8" Hex Bolt

BB-12-PP-3-0087

33

112" Split Lockwasher

RR-00-AP-3

34

#6-32 X 1/4" Round Head Screw

AA-10-AA-3-0025

35

#10 Steel Washer

PP-00-AH-3

36

#10-32 X 1/4" Round Head Screw

AA-10-DD-3-0025

37

Wire Protective Bushing

1210-50

38

1/4"-20 X 3/4" Filister Screw

AA-16-EE-3-0075

39

White Marking Tag

16222-W

Model 0333-2 AC/DC Highway Crossing Bell
Model 0333-2 AC/DC Highway Crossing Bell

Ref.

Description

Part Number

I

Push Nut

970-45

2

Rain Shield

1208-CA

3

1/4" X 1-1/4" Clevis Pin

1209-16

5

Gong

1211

6

Movement Base Assembly

1215*

*

Movement Base Sub-Assembly

1209-1

*

Armature & Pins Sub-Assembly

1209-2

*

Operating Link

1209-4

*

1/4" x 2" Clevis Pin

1209-17

*

Contact Arm

1210-5

*

Resistor Sub-Assembly

1210-42

7

Oscillator & Hammer Assembly

1215-1**

**

Oscillator

1209-11

**

Hammer & Reinforcement Spring

1210-17

8

Cover Gasket

1217-2

9

Cover

1219-2-M

10

Case

1220-2-M

13

Dust Guard-Felt

1248-15-1

15

Contact Block Insulator

1249-16-1

16

Contact Block Assembly

1249-26-1

17

Coil & Core Assembly

1249-30

18

Cable Clamp

1953-30-1

19

Clamp Nut

10707

20

Terminal Strip

2508-69-3

21

Binding Nut

10706

22

Washer

10708

23

1/16" X 1/2" Cotter Pin

VV -00- AZ- 3-005

24

1/16" X 3/8" Cotter Pin

VV-00-AZ-3-0037

25

3/16" X 1" Clevis Pin

1209-15

26

10-32 X I" Filister Screw

AA-16-DD-3-01

27

1/4"-20 X 7/8" Filister Screw

AA-16-EE-3-0087

28

.328" Brass Washer

PP-00-AK-8

29

5/16"-18 X 3/4" Hex Bolt

BB-12-GG-3-0062

30

5/16"-18 X I" Hex Bolt

BB-12-GG-3-01

31

3/8" X 3-1/2" Rivet

1249-40

32

1/2"-13 X 7/8" Hex Screw

BB-12-PP-3-0087

33

1/2" Split Lockwasher

RR-00-AP-3

34

#6-32 X 1/4" Round Head Screw

AA-10-AA-3-0025

35

#10 Steel Washer

PP-00-AH-3

36

#10-32 X 1/4" Round Head Screw

AA-10-DD-3-0025

37

Rectifier Sub Assembly

1210-46-1

40

#8-32 X 3/4" Round Head Screw

AA-10-BB-3-0075

41

MOV Assembly

1210-47

42

Wire Protective Bushing

1210-50

43

1/4"-20 X 3/4" Filister Screw

AA-16-EE-3-0075

44

White Marking Tag

16222-W

Model 0666 115 VAC Warning Bell
Model 0666 115 VAC Warning Bell

Ref.

Description

Part Number

I

Push Nut

970-45

2

Rain Shield

1208-CA

3

1/4" X 1-1/4" Clevis Pin

1209-16

4

Resistor Sub-Assembly

1210-42-1

5

Transformer Assembly 0666 Bell

37-1050-41-5

6

Gong

1211

7

Movement Base Sub-Assembly

1215*

*

Movement Base Sub-Assemby

1209-1

*

Armature & Pins Sub-Assembly

1209-2

*

Operating Link

1209-4

*

1/4" x 2" Clevis Pin

1209-17

*

Contact Arm

1210-5

8

Oscillator & Hammer Sub-Assembly

1215-1**

**

Oscillator

1209-11

**

Hammer & Reinforcement Spring

1210-17

9

Packing Strip for Cover

1217-2

10

Bell Cover

1219-2-M

11

Case

1220-3

12

3/16" X l" Clevis Pin

1209-15

13

Insulating Cap Black

R-2000-1

14

Dust Guard-Felt

1248-15-1

16

Contact Block Insulator

1249-16-1

17

Contact Block Sub-Assembly

1249-26-1

18

Coil & Core Assembly

1249-30

19

Insulating Cap Red

R-2000-1-R

20

Insulating Sleeve 1-1/2" Lg

R-2000-2-B

21

Terminal Strip

2508-69-3

22

Washer

10708

23

Binding Nut

10706

24

1/16" X 1/2" Cotter Pin

VV-00-AZ-3-005

25

1/16" X 3/8" Cotter Pin

VV-00-AZ-3-0037

27

1/4"-20 X 7/8" Filister Screw

AA-16-EE-3-0087

28

10-32 X 1" Filister Screw

AA-16-00-3-01

29

.328" Brass Washer

PP-00-AK-8

30

5/16"-18 X 3/4" Hex Bolt

BB-12-GG-3-0062

31

5/16"-18 X 1" Hex Bolt

BB-12-GG-3-01

32

3/8" X 3-1/2" Rivet

1249-40

33

1/2"-13 X 7/8" Hex Screw

BB-12-PP-3-0087

34

1/2" Split Lockwasher

RR-00-AP-3

35

#6-32 X 1/4" Round Head Screw

AA-10-AA-3-0025

36

#10 Steel Washer

PP-00-AH-3

37

#10-32 X 1/4" Round Head Screw

AA-10-00-3-0025

38

Cable Ties

MC-126-00027

39

#8-32 X 3/4" Round Head Screw

AA-10-BB-3-0075

40

Clamp Nut

10707

41

Shunting Plate

7323-2

42

Bridge Rectifier

1210-45

43

1/4-20 X 3/4" Filister Screw

AA-16-EE-3-0075

44

#8-32 X 1/4" Mach Screw

AA-10-BB-3-0025

45

#8-32 X 1/2" Mach Screw

AA-10-BB-3-005

46

White Marking Tag

16222-W

Bell Mounting Accessories
Bell Mounting Accessories

Ref.

Description

Part Number

A

 

 

 

Gooseneck Bracket for mounting to:

3" ID pipe

873-27B

3-1/2" ID pipe

873-28B

4" ID pipe

873-29B

5" ID pipe

873-30B

6" ID pipe

873-31B

8" ID pipe

873-32B

B

Reducer 5" to 4" ID pipe

990-63

C

Bell Socket for 4" or 5" mast (Not Shown)

1206-20

Bell Socket for 6" mast (Not Shown)

1206-6-CA

Type 555 Motor Driven Bell
Type 555 Motor Driven Bell

The Type 555 motor driven bell has an operating mechanism which consists of a motor, two gears and a bell hammer. Each hammer blow is distinct - so timed that the sound waves of the blow are not broken up by those of subsequent blows.

Operation. A cam, which is mounted on one ofthe gear wheels, engages and raises a weight to a certain point and then allows it to drop; this causes the bell hammer, which is connected to the operating weight by a shaft, to strike the gong, giving it a clear and penetrating sound.

Bulkhead Mount

Top of Mast Mount 4" - 5"

Part Number

Voltage

Part Number

Voltage

0555-ACN-24-C

24VDC

0555-C-12-11560

115 VAC

0555-ACN-37.5-C

37.5 VDC

0555-ACN-74-C

74VDC

0555-ACN

115 VAC

NOTE: 0555-ACN supplied without bell mechanism cover.

Type 555 Motor Driven Bell Parts
Type 555 Motor Driven Bell

Reference

Description

Part Number

1

Rainshield

1208-CA

2

5/16" - 18 x 5/8" Hex Bolt

BB-12-GG-3-0062

3

Gong

1211

4

1/2" - 13 x 7/8" Hex Bolt

BB-12-PP-3-0087

5 &29

1/4" - 20 Hex Nut

JJ-12-EE-2

6

Spring Rocker

1508-6

7

#10 - 32 x 1-1/2" Round Head Screw

AA-10-DD-3-015

8

Bulkhead Mount Case

1506-EM

8A

Mast Mount Case

1506-CA

9

Hammer & Hammer Support

1508-55

10

Hammer Spring

1508-7

11

Gasket - 3/8" Dia. Neoprene Cord

MC-126-00002

12 & 37

1/4" - 20 x 7/8" Filister Screw

AA-16-EE-3-0087

13

Terminal Block

1056-18E

14

Binding Nut

10706

15

Clamp Nut

10707

16

Washer

10708

17

Gear Frame

1411-3-CA

18

10 - 32 x 1/2" Set Screw

DD-29-DD-3-005

19

Operating Weight Stud

1508-4

20

5/16" Plain Washer

PP-00-AK-3

21

Operating Weight

1508-45

22

Drive Gear

1410-1

23

1/6" x 1/2" Cotter Pin

VV-00- AZ- 3-005

24

Operating Weight Pin

1508-46

25

Drive Gear Shaft

1410-22

26

Motor Sub-Assy (Specify 24, 37.5, 74VDC, 115VAC)

26A

Motor Adaptor Plate (Not Shown)

1411-12

27

Cover

1507-EM

28

1/2" Chase Nipple, Straight

RM-122-00001

30

Felt-Packing

1217-2

31

10/32" x 1-1/2" Round Head Screw

AA-10-DD-3-015

32

3/32" Dia. x 5/8" Roll Pin

WW-00- A Y - 3-0062

33

Pinion

1410-15-B

34

Snap Ring

254229

35

3/8" I.D. x 1-1/16" O.D. x 1/32" Washer

1410-32

36

Intermediate Gear & Pinion

1410-16

38

Intermediate Gear Stud

1508-141

39

Stud

1508-35

40

L-Fitting

15002-1

41

Hose Fitting

1508-47

42

Vinyl Tubing (Length as Req'd.)

3814-5

43

Oil Hole Cover

1508-44

44

Mast Socket for 4" or 5" Mast (Not Shown)

1206-20

 

WSP home page Products page Suppliers page  
Rail Safety WCH Index Previous WCH Page Next WCH Page