Triangular Silt Dike™ Barrier Systems Help Contain Eroded Soils

• Designed as an effective and economical alternative to straw bales, silt fence and rock check dams.
• Patented design provides effective erosion and sediment control.
• Aprons on either side of Dike prevent erosion and failure of the structure. Optional, U-shaped wire staples help secure unit in place and conform to rough terrain.
• Lightweight and durable construction - installs in minutes.
• Multiple units can be installed side-by-side for larger areas.
• Other uses include: ditch check dams, diversion dikes, drop inlet protection, continuous barrier, temporary ditch liner and stream and pond protection.
• Helps comply with NPDES, 40 CFR 122.26 (1999).

Part# 9712

Dimensions:

84" L x 67" W x 10.5" H (2134 mm x 1702 mm x 267 mm)

Weight: 8 Ibs. (3.5 kg)

Options: U-Shaped Staples (Part# 9714)

Prevent Erosion And Keep Sediment Out Of Storm Drains And Waterways
Ultra-SiltFence is conveniently shipped in pre-assembled 100-foot lengths. Includes 2" square, sharpened, hard­wood stakes with 3 staples to hold the silt-controlling, polypropylene material firmly in place.

• Contractor-grade material in heights of 24" and 36".
• Easy and economical way to meet erosion and sediment control requirements at construction sites.
• DOT-grade material available.
• Helps comply with NPDES, 40 CFR 122.26 (1999).
  

Control The Flow Of Sediment And Oil Out Of Headwall And Other Types Of Pipes

• Use in pond applications where vertical pipes extend above the water surface, and preventing sediment in-flow during high-water events is
  required.
• Several standard and custom sizes available.
• Helps comply with NPDES, 40 CFR 122.26 (1999).

Part# 9705-O/S

Oil/Sediment Model, for 8" dia. Pipe, 60" L (204 mm dia., 1524 mm L)

Part# 9706-O/S

Oil/Sediment Model, for 12" dia. Pipe, 60" L (305 mm dia., 1524 mm L)

Part# 9707-O/S

Oil/Sediment Model, for 16" dia. Pipe, 60" L (407 mm dia., 1524 mm L)

Other stock sizes and custom sizes available.

Economical And Versatile Sand Bags Have Many Uses

• Can be filled with sand, gravel or other aggregate.
• Sewn-in ties can be used to quickly close off bags.
• Use for flood control, counter balance, temporary barriers, etc.
• Woven monofilament construction - long lasting and durable.
• Large, cubic-yard bags also available (3,000-lb. capacity).

Remove Pollutants From Stormwater Flow In Gutters and Downspouts

• Special "X- TEX" oil-absorbing filter material removes oil, grease and other hydrocarbons from gutter and downspout waterflow.
• Quick and easy to install on most downspouts.
• Filter material is easily removed and replaced.
• Polyethylene construction will not rust or corrode.
• Helps comply with NPDES, 40 CFR 122.26 (1999).

Part# 9315

Ultra-DownSpoutGuard

17 lbs.

Part# 9316

Refill for Ultra-DownSpoutGuard

4 lbs.

Total absorption capacity: 8 gallons of hydrocarbons

Remove Phosphorous From Stormwater
PhosFilter is an engineered filtration media that has the unique ability to filter and retain up to 1 1/2 times its weight in phosphorous. It has been shown to remove over 90% of phosphorous in its particulate and dissolved forms. Testing done by the South Florida Water Management District at a local cattle ranch showed a phosphorous removal rate that exceeded 90%. (More testing information is available upon request.) Helps comply with TMDL requirements.

Throughout this catalog, you've seen this logo.
So what does it mean?
It means that product is available using new X-TEX material, a lipophilic medium. This material is produced from a patented recycled blend of synthetic fibers. Utilizing state-of-the-art technology, these materials are blended and processed into a lightweight fiber mass with enormous surface area and interstitial spaces creating a high performance sorbent and filter media.

• Designed for use as a durable long lasting geo-textile and filter media.
• Allows large volumes of water to pass through while sorbing liquid hydrocarbons, including petroleum, animal and vegetable oils.
• Cost effective - absorbs an average of 20 times its own weight of liquid hydrocarbons.
• Great for use in oil/water separators, stormwater and wastewater filtration systems and water "polishing" applications.
• X- TEX in fabricated forms can help meet NPDES and TMDL requirements.
• When used as a filter medium, water passes freely, while adsorption of target hydrocarbons begins on contact. Extremely efficient due to the enormous lipophilic surface area of the altered fibers.
• Works well as a fibrous supporting matrix for other water conditioning materials such as selective zeolites, activated carbon, zero-valent iron filings, etc. X-TEX can be "conditioned" to remove specific chemical compounds.
• Approximately 85-90% of sorbed oils can be reclaimed from X- TEX and the media reused.
• In bench-scale testing, X-TEX has shown promising results in filtering out emulsified oils and hydrocarbons out of a water stream. This characteristic creates opportunities for the use of X-TEX in oil/water separation applications and other hydrocarbon filter projects.
• X- TEX is environmentally benign and user­friendly. It does not leach harmful substances into the environment and when incinerated produces minimal residue or ash.

Catch And Trap Oil Drips Before They Can Reach The Ground

• Use under machinery and equipment to catch fluid leaks during maintenance or repairs.
• Rolls or folds into small package ­store in vehicles for onsite repairs.
• Keep floors free of oily mess - reduce slip hazards.
• Three-layer system provides maximum protection:

Top layer: UV resistant geotextile fabric - allows oils to pass through.
Middle layer: Absorbent core ­oil-only polypropylene traps oils but allows stormwater to evaporate.
Bottom layer: Impermeable backing keeps drips from leaching through to the ground or shop floor.

• Helps comply with NPDES, 40 CFR 122.26 (1999).

Part#

Dimensions

Capacity

Weight

8305

5' x 5'

Up to 3 gallons

4lbs.

8306

10' x 10'

Up to 12 gallons

6lbs.

• Tapered design wedges securely into standard drains to stop any flow.
• Eyebolts are removable, allowing installation of grating with DrainPlug in place.
• Non-absorbing, easily cleaned for repeated use.

Standard Sizes:

2" Diameter ........ Part# 2113

8" Diameter ........ Part# 2118

3" Diameter ........ Part# 2114

10" Diameter ....... Part# 2119

4" Diameter ........ Part# 2115

12" Diameter ....... Part# 2121

6" Diameter ........ Part# 2117

3-Plug Kit' ......... Part# 2116

* (Includes one each of 2", 3" and 4" Ultra-DrainPlugs and Plastic Carrying Case.)

Flexible polyurethane material
Resists oil, water and most aggressive chemicals
Prevents contaminants from entering drain
Non-absorbing material
Cleans with soap and water
Safety orange color

2" dia. conical plug, Weight: 1.5 lbs.

3" dia. conical plug, Weight: 2 lbs.

4" dia. conical plug, Weight: 3 lbs.

6" dia. conical plug, Weight: 8 lbs.

8" dia. conical plug, Weight: 14 lbs.

10" dia. conical plug, Weight: 22 lbs.

12" dia. conical plug, Weight: 32 lbs.

Temporary Berm Seals Off Spills From The Environment, Nearby Drains And Doorways

• Standard 10-foot sections can be cut to various lengths to meet custom needs.
• Unique, urethane material "weeps" into small cracks and crevices to seal off liquid flow.
• Spill Berm is non-absorbing and is easily cleaned for repeated use.
• Applications include:
• Spill response
• Temporary secondary containment
• Sealing off of doorways during washdown operations
• Flexible Ultra-Spill Berm will bend and turn to form almost any shape while temporarily "bonding" to any smooth surface.
• Helps comply with NPDES and SPCC.

Part# 2100: Orange • Part# 2050: Black

Dimensions: 10' x 4" x 2 1/4"

Weight: 31 lbs. per unit

Material: Non-absorbing polyurethane

Optional connectors (Part # 2101) are used to connect 10' sections

Optional Corners (Part# 2102) are used with Connectors to make 90° corners

Taller Spill Berm Helps Contain or Divert Larger Volume Spills

• Flexible polyurethane construction is non-absorbent and chemical resistant - easily cleans with soap and water for repeated uses.
• Built-in connectors allow multiple 5-foot units to be quickly and easily connected.
• Helps comply with NPDES and SPCC.

• Reinforcing mesh is "sandwiched" between layers of polyurethane - increases durability and resistance to tearing.
• Unique, urethane construction allows the pad to deform and seal off most drains - temporarily "seals" to any smooth surface.
• A valuable addition to any emergency response plan, spill kit, SPCC or stormwater management program.
• Unlike some alternative products, BOTH sides will quickly seal drains - there is no specified "top" or "bottom.”

ULTRA-DRAINSEALS

ULTRA-DRAINSEAL WALLMOUNT

Flexible, non-absorbing material with reinforced, tear-resistant mesh
One unit per box, easily cuts to special shapes and sizes
Resists oil, water and most aggressive chemicals, cleans with soap and water
Prevents contaminants from entering drain
Helps comply with SPCC
Helps comply with NPDES

Square:
Part# 2126: 18" x 18" x 3/8" • 5 lbs.
Part# 2127: 24" x 24" x 3/8" • 9 lbs.
Part# 2130: 36" x 36" x 3/8" • 10 lbs.
Part# 2131: 42" x 42" x 3/8" • 20 lbs.
Part# 2132: 48" x 48" x 3/8" • 34 lbs.
Part# 2133: 54" x 54" x 3/8" • 41 lbs.

Part# 2140: Fits 18" x 18", 24" x 24", .12" dia. and 20" dia. DrainSeals
Part# 2142: Fits 36" x 36" and 30" dia. DrainSeals
Part# 2143: Fits 42" x 42", 48" x 48" and 42" dia. DrainSeals

Circular:
Part# 2134: 12" dia. x 3/8" • 2 1/2 lbs.
Part# 2135: 20" dia. x 3/8" • 5 lbs.
Part# 2136: 30" dia. x 3/8" • 10 lbs.
Part# 2137: 4.2" dia. x 3/8" • 20 lbs.

Made of durable polyethylene. Velcro strap allows quick and easy access.

Non-slip handle for easy carrying.
Mounting hardware included.

Rectangular:
Part# 2124: 18" x 58" x 3/8" • 16 lbs.
Part# 2125: 36" x 58" x 3/8" • 30 lbs.

Truck Mounted Container Provides Quick and Easy Access to Ultra-DrainSeals®

• Installs quickly and easily to trailer undercarriage - hardware included.
• Tethered hook and loop fastener secures end cap - allows quick and easy access.
• Polyethylene construction will not rust or corrode.

Part# 2145

Fits 18" x 18", 24" x 24", 12" dia. and 20" dia. DrainSeals

Part#2146

Fits 36" x 36" and 30" dia. DrainSeals

Part#2147

F-its 42" x 42", 48" x 48" and 42" dia. DrainSeals

Ultra-DrainSeal Plus Protects Drains And Can Be left Outside Long-Term

• Urethane bottom layer (same as Ultra-DrainSeal) keeps spills from entering drains.
• Rugged, reinforced PVC top layer provides protection from extended UV exposure and vehicular traffic.
• Excellent for use in parking areas, loading docks and other areas where drains may be driven over.
• Bright yellow color helps identify protected drains.

One unit per box

Resists oil, water and most aggressive chemicals, cleans with soap and water

Prevents contaminants from entering drain

Helps comply with SPCC

Helps comply with NPDES

Square:
Part# 21 66: 18" x 18" • 7 lbs.
Part# 2167: 24" x 24" • 15 lbs.
Part# 2160: 36" x 36" • 16 lbs.
Part# 2161: 42" x 42" • 27 lbs.
Part# 2162: 48" x 48" • 43 lbs.
Part# 2163: 54" x 54" • 53 lbs.

Circular:
Part# 2174: 12" dia. • 4 lbs.
Part# 2175: 20" dia. • 7 lbs.
Part# 2176: 30" dia. • 13 lbs.
Part# 2177: 42" dia. • 26 lbs.

• Available in·2-drum and 4-drum configurations.
• Applications for the all-polyethylene units include satellite waste collection and storage of virgin chemicals.
• Black color helps hide dirt and grime.
• Meet SPCC, EPA Container Storage Regulation 40 CFR 264.175 and Uniform Fire Code Spill Containment Regulations.

Ultra-Spill Pallet P4-3000

Ultra-Spill Pallet P2-1500

Part# 1112: no drain

Part# 2504: no drain

Part# 1113: with drain

Part# 2505: with drain

Dimensions: 53" x 53" x 11 3/4"

Dimensions: 53" x 29" x 16 1/2"

Weight: 85 lbs.

Weight: 63 lbs.

Uniformly Distributed Load: 3,000 lbs.

Uniformly Distributed Load: 1,500 lbs.

Containment Capacity: 66 gallons

Containment Capacity: 66 gallons

Optional PullOver Covers, Part# 1006 Optional Loading Ramp, Part# 0678

Optional PullOver Covers, Part# 1016

The Only l-Drum, Lockable Outdoor Containment Unit Available

• Convenient "roll-top" cover slides up and out of the way - allows quick access to drum pumps and funnels.
• 100% polyethylene construction will not rust or corrode.
• Safe Handling - can be moved by forklift under the "shoulder" area or wheeled with the optional dolly.
• Meets SPCC and EPA Container Storage Regulation 40 CFR 264.175.
• Helps meet new Stormwater Management Regulations - NPDES, 40 CFR 122.26 (1999).

Ultra-HardTop Pl Plus

Dolly

Part# 9640: no drain
Part# 9641: with drain

Part# 0417

Dimensions: 36" x 36" x 66"

Dimensions: 26 1/2" x 26 1/2" x 5"

Weight: Top 36 Ibs. Weight: Bottom 26 Ibs.

Weight: 31 lbs.

Load Capacity: 800 lbs.

Load Capacity: 800 lbs.

Containment Capacity: 64 gallons

Construction: Steel

Ultra-HardTop P2 Plus is lockable with a standard padlock, and can be safely lifted by forklift with drums in place.

• Tall 23 3/4" head space easily accommodates rotary drum pumps and large conical funnels.
• Low profile (8 3/4") containment pallet positions drum-top funnels at a safe, convenient level to pour hazardous wastes.
• 100% polyethylene construction will not rust or corrode.
• Meets SPCC, EPA Container Storage Regulation 40 CFR 264.175 and Uniform Fire Code Spill Containment·Regulations.
• Helps meet new Stormwater Management Regulations ­ NPDES, 40 CFR 122.26 (1999).

Ultra-HardTop P2 Plus

Loading Ramp

Part# 9612: no drain  Part# 9613: with drain

Part# 0676

Dimensions: 67 1/4" x 41 1/4" x 74"

Dimensions: 46" x 28" x 8 3/4"

Weight: 260 Ibs.

Weight: 25 lbs.

Uniformly Distributed Load: 4,500 lbs.

Surface: Non-slip

Containment Capacity: 66 gallons

Construction: Polyethylene

Safely Store 4 Drums Outdoors

• Unique "dual closure" offers significant ergonomic and convenience benefits - drums are easily accessed from either side.
• Roll-top covers can be easily lifted from waist height to access drum tops - no need to reach near ground level.
• low profile (8 3/4") containment pallet positions drum­tops at a safe, convenient level to pour wastes into funnels or to use drum pumps.
• Forkliftable, lockable, all-polyethylene construction will not rust or corrode.
• Helps meet new Stormwater Management Regulations ­NPDES, 40 CFR 122.26 (1999).
• Meets SPCC and EPA Container Storage Regulation 40 CFR 264.175.

Part# 9636: no drain

Weight: 440 Ibs.

Part# 9637: with drain

Containment Capacity: 75 gallons

Outside Dimensions: 64 1/2" x 62" x 79"

Uniformly Distributed Load: 9,000Ibs.

Options: Loading Ramp (part# 0676) - stores inside containment unit when not in use

Safely Store Multiple Drums Outdoors

• Available in 8, 12, 16 and 20-drum models. Extender Kits are available to expand capacity beyond 20-drums.
• All polyethylene construction ­offers excellent chemical resistance, will not rust or corrode.
• Separate, lockable compartments feature a unique I/2-way" entry system - allows quick access to all four (4) drums.
• Roll-top covers can be easily lifted from waist height to access drum tops.
• Swing-out doors provide safety and convenience for loading or unloading drums.
• Low-profile (8-3/4" height) containment pallet positions drum-tops at a safe, convenient level to pour wastes into funnels or to use drum pumps.
• Rugged, 9,000 lb. uniformly distributed load (UDL) capacity per compartment allows safe storage of IBC tanks as well as drums. See pages 22-23.
• Units ship partially unassembled for freight savings.
• Meets EPA Container Storage Regulation 40 CFR 264.175 and helps comply with NPDES, 40 CFR 122.26 (1999). Considered a Stormwater Management "Best Management Practice" product (BMP). Also meets SPCC Regulations.

Multiple I/4-drum compartments" offer flexible usage for a broad range of operations including: storage of virgin chemicals, active hazardous waste
collection and storage of spill response supplies. Internal walls and separate sumps allow materials to be segregated.

Part# 9650: HardTop P8, no drain, 815 lbs.
Part# 9651: HardTop P8, with drain, 815 lbs.
Dimensions: 126" x 62" x 79"
Capacity: (8) 55-gallon drums

Part# 9652: HardTop P12, no drain, 1190 lbs.
Part# 9653: HardTop P12, with drain, 1190 lbs.
Dimensions: 188" x 62" x 79"
Capacity: (12) 55-gallon drums

Part# 9654: HardTop P16, no drain, 1565 lbs.
Part# 9655: HardTop P16, with drain, 1565 lbs.
Dimensions: 250" x 62" x 79"
Capacity: (16) 55-gallon drums

Part# 9656: HardTop P20, no drain, 1940 lbs.
Part# 9657: HardTop P20, with drain, 1940 lbs.
Dimensions: 312" x 62" x 79"
Capacity: (20) 55-gallon drums

Part# 9658: 4-Drum HardTop Extender Kit, no drain, 375 lbs
Part# 9659: 4-Drum HardTop Extender Kit, with drain, 375 lbs.

Weight Capacity: 9,000 lbs. UDL per compartment
Containment Capacity: 75 gallons per compartment

Options: Polyethylene Loading Ramp - Part# 0676

Comply With Regulations While Storing IBC Tanks Outdoors

• Upper roll-top door and lower swing-out doors combine to allow easy and convenient access to 1Be.
• Safely stores an IBC tank with maximum dimensions of 52" x 52" x 61".
• low profile (28" height), 360 gallon containment sump allows safe material handling and dispensing.
• Forkliftable, lockable, all-polyethylene design will not rust or corrode.
• Helps meet new Stormwater Management Regulations ­NPDES, 40 CFR 122.26 (1999).
• Meets SPCC and EPA Container Storage Regulation 40 CFR 264.175.

Part# 1162: no drain

Weight: 525 lbs.

Part# 1161: with drain

Containment Capacity: 360 gallons

Outside Dimensions: 64 1/2" x 62" x 96"

Uniformly Distributed Load: 8,500 lbs.

Low-Cost Spill Containment for Multiple IBC Tanks

• Indoor and Outdoor Models available for 2, 3, 4 or 5 tanks.
• Each IBC tank sits on a low-profile spill pallet with a containment capacity of 75 gallons - Expansion Tanks provide 65 gallons of additional capacity.
• 100% polyethylene construction ­eliminates the potential for rust and corrosion.
• "Flow-through" bulkhead fittings connect spill pallets and Expansion Tanks together, allowing spills to be channeled throughout the containment system - containment capacity is thereby "borrowed" from adjacent spill pallets and Expansion Tanks.
• Meets SPCC and EPA Container Storage Regulation 40 CFR 264.175.
• Outdoor models help meet new Stormwater Management Regulations ­NPDES, 40 CFR 122.26 (1999).
• Meets SPCC and EPA Container Storage Regulation 40 CFR 264.175.
• Outdoor models help meet new Stormwater Management Regulations ­NPDES, 40 CFR 122.26 (1999).

OUTDOOR MODEL FEATURES:

• Unique "roll top" enclosures and swing-out doors allow convenient loading and unloading of !BC tanks.
• Compartments are lockable for secure storage of hazardous materials.
• Optional Extender Kits (Part# 9658) provide for the addition of another compartment. (Holds 1 IBC tank per Extender Kit).

ULTRA-MODULAR IBC SPILLPALLETS

Components Included (Qty)

Part#

Description

Dimensions

Weight Capacity

Gallon Capacity

Weight

Pallets

Exp. Tanks

I
n
d
o
o
r

1125

2- Tank Model

186" x 62" x 8 3/4"

9,000 Ibs. UDL per Pallet

280 gal.

310 lbs.

(2)

(2)

1126

3-Tank Model

248" x 62" x 8 3/4"

9,000 Ibs. UDL per Pallet

355 gal.

435 lbs.

(3)

(2)

1127

4-Tank Model

279" x 62" x 8 3/4"

9,000 Ibs. UDL per Pallet

365 gal.

531 lbs.

(4)

(1)

1128

5-Tank Model

310" x 62" x 8 3/4"

9,000 Ibs. UDL per Pallet

375 gal.

625 lbs.

(5)

(0)

1118

Assembly Kit

Includes hole saw, arbor and set of 2 tightening tools REQUIRED

9630

SpillPaliet Only

62" x 62" x 8 3/4"

9,000 Ibs. UDL

75 gal.

125 lbs.

NA

NA

O
u
t
d
o
o
r

1165

2-Tank Model

126" x 93" x 79"

9,000 Ibs. UDL per Pallet

280 gal.

881 lbs.

(2)

(2)

1166

3-Tank Model

188" x 93" x 79"

9,000 Ibs. UDL per Pallet

355 gal.

1258 lbs.

(3)

(2)

1167

4- Tank Model

250" x 93" x 79"

9,000 Ibs. UDL per Pallet

365 gal.

1603 lbs.

(4)

(1)

1168

5- Tank Model

312" x 62" x 79"

9,000 Ibs. UDL per Pallet

375 gal.

1948 lbs.

(5)

(0)

1118

Assembly Kit

Includes hole saw, arbor and set of 2 tightening tools REQUIRED

9658

Extender Kit

64" x 62" x 79"

9,000 lbs. UDL

75 gal.

375 kbs.

NA

Options/Accessories: Part# 1117 - 2" Bulkhead Fittings (Set of 2),
Part# 1124 - Expansion Tank only, 61" x 31" x 12 1/2", Capacity: 65 gallons, 30 lbs.

ULTRA-275 CONTAINMENT SUMP

• Eliminate costly spills while storing fuels, oils and other hazardous liquids.
• Rugged, all polyethylene construction will not rust or corrode.
• Optional 3/4" drain fitting alliows use with Ultra-Self Bailer (see below).
• Meets EPA Container Storage Regulation 40 CFR 264.175.
• Helps comply with SPCC and NPDES,40 CFR 122.26 (1999).

ULTRA-550 CONTAINMENT SUMP

• Economical containment for 500 and 550 gallon fuel and oil tanks.
• 100% polyethylene construction will not rust or corrode; provides superior chemical and weather resistance.
• Optional 3/4" drain fitting available.
• Use with optional Ultra-Self Bailer (Part# 9935) for outdoor containment - Self Bailer allows clean stormwater to passively drain from sump while capturing hydrocarbons.
• Meets Stormwater, SPCC and EPA Containment Regulations.

ULTRA-1000 CONTAINMENT SUMP

• Contains 1000-gallon fuel tanks.
• 1-piece molded polyethylene design - will not rust or corrode.
• Nestable design saves freight and minimizes storage space.
• Optional 3/4" drain fitting available - allows use with Ultra-SelfBailer.
• 2" drain fitting also available.
• Use with optional Ultra-Self Bailer (Part# 9935) for outdoor containment - Self Bailer allows clean stormwater to passively drain from sump while capturing hydrocarbons.
• Meets Stormwater, SPCC and EPA Containment Regulations.

ULTRA-275 CONTAINMENT SUMP

ULTRA-550 CONTAINMENT SUMP

ULTRA-lOOO CONTAINMENT SUMP

Part# 2800: no drain • Part# 2801: with drain

Part# 2823: no drain • Part# 2820: with drain

Part# 2830: no drain • Part# 2831: with 3/4" drain • Part# 2832: with 2" drain

Outside Dimensions: 84 1/2" x 43 3/4" x 29"

Outside Dimensions: 87" x 62 1/4" x 32 3/4"

Outside Dimensions: 148" x 63" x 33"

(2147 mm x 1112 mm x 737 mm)

(2210 mm x 1582 mm x 832 mm)

(3759 mm x 1600 mm x 838 mm)

Inside Top: 80" x 39"; Inside Bottom 73" x 31"

Inside Bottom: 75 3/4" x 47 3/4"

Inside Bottom: 144" x 56"

(2032 mm x 991 mm); (1855 mm x 788 mm)

(1925 mm x 1213 mm)

(3315 mm x 1156 mm)

Weight: 90 lbs. (41 kg)

Weight: 108 lbs. (49 kg)

Weight: 180 lbs. (82 kg)

Containment Capacity: 360 gallons (1363 L)

Containment Capacity: 605 gallons (2291 L)

Containment Capacity: 1,100 gallons (4164 L)

Optional PullOver Cover, Part# 2810; Ultra-SelfBailer

Option: Ultra-SelfBailer

Option: Ultra-SelfBailer

Passively Filter Hydrocarbons From Stormwater In Outdoor Containment Products

• The best protection for non-monitored containment sites.
• Helps eliminate problems associated with the collection of rainwater in outdoor containment products.
• Simple installation - can be connected to any outdoor containment product.
• Hydrocarbon "sheens" and modest spills are captured ­clean stormwater drains through the outflow port.
• Larger or concentrated spills activate "auto-shutoff" mechanism.
• Manual shutoff valve can be used to secure all draining operations, change out the filter cartridge.
• Filters are quickly and easily replaced.

Part# 9935: standard

Part# 9937: large

Part# 9926: XL

Part# 9928: XXL

Dimensions: 28" L x 3 1/2" dia.

Dimensions: 36" Lx 4 1/2" dia.

Dimensions: 39" Lx 6 1/2" dia.

Dimensions: 43" L x 9" dia.

Weight: 2 lbs.

Weight: 7 lbs.

Weight: 11 lbs.

Weight: 16 lbs.

Flow Rate: 7.5 gallons per hour*
Material: PVC

Flow Rate: 22 gallons per hour*
Material: PVC

Flow Rate: 42 gallons per hour*
Material: PVC

Flow Rate: 55 gallons per hour*
Material: PVC

Replacement Filter Cartridges
2-Pack Part #9936

Replacement Filter Cartridge
1-Pack Part #9938

Replacement Filter Cartridge
1-Pack Part #9927

Replacement Filter Cartridge
1-Pack Part #9929

Filter Grease and Oil from Stormwater Runoff

• Heavy-duty polyethylene units use x- TEX® material, a high­performance oil absorbent, below removable grating to remove oil, grease and other hydrocarbons from stormwater runoff.
• Ports are located in base of units to drain off clean stormwater.
• X- TEX® roll of absorbent is quickly and easily removed and replaced.
• Excellent for use underneath dumpsters, grease collection tanks, outdoor machinery or equipment.
• All-polyethylene construction will not rust or corrode.
• Helps meet Stormwater Management Regulations.

Weight Capacity: 9,000 lbs.

Capture Hazardous Spills from Railroad Tanker Cars and Locomotives
Ultra-TrackPans have been designed to provide spill containment at industrial rail sidings, locomotive maintenance and fueling facilities. Available in virtually any length, Ultra-TrackPans may be used to collect small spills and leaks or to capture and channel off significant spills caused by defective equipment or a major overflow.

• Prevent Costly Cleanup and Regulatory Fines.
• Slip-Resistant Design - Entire top surface is safe to walk on, even when wet or oily.
• All polyethylene construction - Rugged TrackPans withstand harsh chemicals and are designed to function in temperatures ranging from -40º F to +140º F.
• Sealed System - Polyethylene gaskets keep spills from falling between the rails and Pans.
• Trucks and other vehicles can drive over TrackPans with grates in place.*

 *To drive over TrackPans, firm footing must be beneath the Pans; also must "ramp up" side Pans with asphalt or concrete.

Optional T rackPan Covers Keep Rainwater Out Of The Pans, Providing Effective Stormwater Management
Unique stormwater feature is designed to eliminate "pooling" of rain that falls on top of the Center Pan Covers; rain is channeled onto the ballast between the tracks, stays out of the Pans.

• Meets SPCC and EPA Stormwater Management Regulations.
• Also meets New York State Chemical Bulk Storage Regulation Section 599.17c - Secondary Containment for Transfer Stations.

• Low Maintenance - Unlike carbon steel track pans, TrackPans will not rust or corrode, Polyethylene resin is treated with a UV inhibitor, resists degrading effects of the sun,
• Low Cost Installation - Lightweight TrackPans can be easily installed without heavy lifting equipment, i.e., forklifts, cranes, backhoes, etc. Minimal tools and labor required.
• Slip Resistant Surfaces - Pans, grates and covers have been designed with safety in mind. All top surfaces resist slips when wet or oily.
• Long Work Life - Estimated to perform for 20-30 years; longer than fiberglass pans.

TrackPans with Grates, No Covers

TrackPan Covers Only

Options

Part# 9566:
Center TrackPan with Grates
(Includes 2 bulkhead fittings, 4 gaskets, 2 grates)
Dimensions: 53 1/2" x 53 1/2" x 6"
Weight: 106 lbs.
Containment Capacity: 18 gallons

Part# 9580:
Cover for Center TrackPan
Dimensions: 56" x 54"
Weight: 24 lbs.

Part# 9584:
Rebar Fasteners with Protective Cap, 20-Pack

Part# 9559:
3" dia. Bulkhead Fitting (for below-grade piping)

Part# 9586:
Sorbent Mats, Center Pan (2/set),10-Pack

Part# 9576:
Side TrackPan with Grate
(Includes 1 bulkhead fitting, 2 gaskets, 1 grate)
Dimensions: 53 1/2" x 27 1/2" x 6"
Weight: 60 lbs.
Containment Capacity: 19 gallons

Part# 9581:
Cover for Side TrackPan
Dimensions: 56" x 27 3/4"
Weight: 11 lbs.

Part# 9585:
Sorbent Mats, Side Pan, 20-Pack

Part# 9571: Grate Only for Center Pan (Left)
Part# 9572: Grate Only for Center Pan (Right)

Part# 9573:
Grate Only for Side Pan

NOTE: Ultra TrackPans can also be ordered as complete systems: Popular 9-foot, 40-foot and 60-foot systems are available.