A Stormwater Pollution Prevention Plan (SWPPP) is basically an erosion, sediment and waste chemical control plan. It is up to the permit holder to decide what types of Best Management Practices (BMPs) to use at a given
site, but the company/municipality/ contractor must comply with the permit requirement. SWPPPs will typically include:

• Site Description with a map.
• A description of the sediment, erosion and polluted water controls used on-site, including stabilization and structural practices (such as seeding, and catch basin inserts like the Ultra-DrainGuard or UItra-GrateGuard).
• Descriptions of the BMPs to control stormwater runoff after completion of a construction activity or as a part of a long term maintenance plan.
  

What are the Permit Requirements? Permit holders are required to develop, implement and enforce a stormwater management program to:

1. Reduce the discharge of pollutants to the maximum extent practicable (MEP).
2. Protect water quality.
3. Satisfy the appropriate water quality requirements of the Clean Water Act.
4. Submit a Notice of Intent (NOI) which includes BMPs to be used, measurable goals, frequency of actions and responsible persons.

What are Baseline BMPs?

• Good Housekeeping: reduce spill potential, routine inspections.
• Preventive Maintenance: maintain pipes, pumps, drum/tank storage and stormwater devices.
• Visual Inspections: signs of obvious stormwater contamination in outdoor storage and processing areas.
• Spill Prevention and Response: spill containment of drums and tanks, spill clean-up procedures, easily accessible spill response products.
• Sediment and Erosion Control: control methods for high erosion areas due to topography activities or other factors.
• Runoff Management: flow diversion, filtering using catch basin inserts, use of sumps, berms, mitigative techniques such as vacuuming, use of sorbents.

What are Advanced BMPs?

• Vegetated Filter Strips
• Detention Basins and Ponds
• Catch Basin Filters (disposable)
• Passive Skimmers
• Litter Removal Devices
• Silt Fences
• Drain Inlet Inserts
• Permanent Catch Basin Inserts

Partial List of Industries Requiring a Stormwater Pollution Prevention Plan

• Paper
• Chemical
• Petroleum
• Metals
• Transportation
• Food
• Textiles
• Plastics
• Wood
• Cosmetics
• Paint
• Fertilizers
• Building Products
• Minerals
• Marine

Keep Sediment And Other Pollutants From Entering The Water System With Ultra-DrainGuard Catch Basin Inserts
Designed For Practical Use In:
Industrial Facilities - keep oil and other contaminants from entering storm drains.
Construction Sites - capture eroded soil and wind-blown debris.
Parking Lots, "Drive-Up" Retail Facilities­selected geotextiles collect oil, fuel and other contaminants that drip from cars.
Oil & Sediment Model (Part# 9217/9218/9356) - removes hydrocarbons, dirt, sand and other contaminants.
Oil & Sediment Plus Model (Part# 9219/9220/9358) - the addition of X-TEX filter strips increases oil and grease absorption.
Trash & Debris Model (Part# 9227/9229) - designed specifically to catch larger items and floatables such as leaves, cigarette butts and paper goods.
Helps comply with NPDES, 40 CFR 122.26 (1999).

OIL & SEDIMENT MODEL

OIL & SEDIMENT PLUS MODEL

TRASH & DEBRIS MODEL

Part#

9217 (1-Pack)
9218 (10-Pack)
9356, 60" x 60" (1-Pack)

9219 (1-Pack)
9220 (10-Pack)
9358, 60" x 60" (1-Pack)

922 7 (l-Pack)
9229 (10-Pack)

Weight per unit

9217/9218 - 1 lb.
9356 - 2 lbs.

9219/9220 - 2 lbs.
9358 - 3 lbs.

1 lb.

Dimensions

9217/9218 - 48" L x 36" W x 18" H
9356 - 60" L x 60" W x 18" H

9219/9220 - 48" L x 36" W x 18" H
9358 - 60" L x 60" W x 18" H

48" Lx 36" W x 18" H

Performance

9217/9218 - Up to .87 gallons of oil and up to 40 lbs. of sediment
9356 - Up to 1.55 gallons of oil and up to 40 lbs. of sediment

9219/9220 - Up to 1.38 gallons of oil and up to 40 lbs. of sediment
9358 - Up to 2.06 gallons of oil and up to 40 lbs. of sediment

1 cu. ft. (before reaching bypass ports)

Accessories

Grate Lifter (Part# 9234), Grate Hook (Part# 9235), Retainers (Part# 9237 or 9238).

Custom sizes are available.

The Ultimate in Catch Basin Inserts Removes Dirt, Sediment, Hydrocarbons and Reduces Harmful Bacteria

• Same hydrocarbon and sediment removal capabilities as the Ultra-DrainGuard, Oil & Sediment Plus Model (see opposite page) but with additional bacteria reducing properties.
• 1.5" x 20" strips of X-lex AM (Antimicrobial) hang from the bottom of the DrainGuard and float on top of standing catch basin water, reducing destructive bacteria.
• The patented antimicrobial nano-structure kills single cell organisms such as bacteria, fungi, yeast and algae by molecular physical penetration, electrostatic attraction and electrocution.
• Helps comply with NPDES, 40 CFR 122.26 (1999) and lMDL requirements.

Part#

9376 (1-Pack) • 9377 (10-Pack)

Weight

3lbs. (1.5 kg)

Dimensions

48" Lx 36" W x 38" H (1220 mm x 915 mm x 966 mm)

Performance

Up to 1.57 gallons of oil and up to 40 Ibs. of sediment (Up to 6 L of oil and up to 18 kg of sediment)

Custom sizes available.

Stop Silt, Sediment And Other Debris From Entering Curb Inlets And Catch Basins

• For use with combination catch basins with a street grate and curb opening.
• Heavy-duty tension rod secures DrainGuard inside curb inlet - stopping sediment and other contaminants from entering curb portion of storm drain.
• Fits grate sizes up to 40" x 40" and curb inlets up to 60" wide.
• Helps comply with NPDES, 40 CFR 122.26 (1999).

Part# 9230

Oil & Sediment Model, for curb inlets from 24" - 42"

Part# 9231

Oil & Sediment Model, for curb inlets from 42" - 60"

Part# 9239

Oil & Sediment Plus Model, for curb inlets from 24" - 42"

Part# 9240

Oil & Sediment Plus Model, for curb inlets from 42" - 60"

Custom sizes available.

Keep Oil and Sediment From Entering Catch Basins With Environmentally Friendly Inserts

• Made completely out of X-Tex material - 100% recycled content.
• Superior water flow rate (151 gal/ft.²), together with built-in overflow ports prevents ponding and flooding.
• X-Tex material captures silt and sediment from runoff in addition to absorbing hydrocarbons.
• Quick and easy installation - simply lift catch basin grate, lower DrainGuard in place, and replace the grate.
• Helps comply with NPDES, 40 CFR 122.26 (1999) and lMDL requirements.

Part# 9378, 1-Pack • Part# 9379, 10-Pack

Capture Dirt and Sediment At Construction Sites and Other "High Erosion" Area.

• Rugged polypropylene construction can be easily rinsed and reused.
• Deep accumulation pocket (36") can hold up to 500 Ibs. of soil, sand, sediment and dirt.
• Designed for easy removal with backhoe, forklift or other equipment.
• Custom sizes available.
• Helps comply with NPDES, 40 CFR 122.26 (1999).

Part#

Dimensions

9341

24" x 24"

9340

24" x 36"

9342

24" x 48"

9332

24" x 24", Curb-Style

9330

24" x 36", Curb-Style

9331

24" x 48", Curb-Style

Keep DrainGuards In Place Without The Use Of Grates

• Heavy-Duty coated steel retainers mount on inside ledge of catch basin - securing DrainGuard when grating is removed or installed.
• Two sizes of telescoping retainers adjust to fit any size storm drain.
• For use with all DrainGuards.

Part# 9237

• Helps inform and educate the public that most storm drains go directly into waterways untreated.
• Installs quickly and easily using permanent adhesive - cleaner and more environmentally friendly than paint and stencils.
• Designed for long life - heavy-duty plastic construction is scratch-resistant and will not rust or corrode.
• Part # 9208 includes 25 Markers and adhesive.
• Helps comply with NPDES, 40 CFR 122.26 (1999).

Replace Messy Hay Bales And Keep Sediment And Oil From Entering Drains And Inlets

• Two standard sizes: Part# 9292 fits up to 24" x 24" grates. Part# 9293 fits up to 4' x 6' grates.
• Helps comply with NPDES, 40 CFR 122.26 (1999).

Partll 9292-0/S

Oil/Sediment Model, 36" dia.

Part# 9293-0/S

Oil/Sediment Model, 4' x 6'

Other stock sizes and custom sizes available.

Capture Sediment, Silt And Other Debris Before They Enter Our Waterways

• For use with flat grate catch basins.
• Allows run-off to flow through while blocking sediment and/or capturing oil.
• Standard and custom sizes available.
• Helps comply with NPDES, 40 CFR 122.26 (1999) and TMDl requirements.

Part# 9272-SED

Sediment Only Model, 18" x 24" x 4" (458 mm x 610 mm x 102 mm)

Weight: 2.5 Ibs. (1 kg)

Part# 9278-SED

Sediment Only Model, 24" x 48" x 4" (610 mm x 1220 mm x 102 mm)

Weight: 3.0 Ibs. (1.5 kg)

Part# 9272-0/S

Oil/Sediment Model, 18" x 24" x 4" (458 mm x 610 mm x 102 mm)

Absorbs up to 1.375 gallons (5 L) of oil per unit

Part# 9278-0/S

Oil/Sediment Model, 24" x 48" x 4" (610 mm x 1220 mm x 102 mm)

Absorbs up to 1.375 gallons (5 L) of oil per unit

Other stock sizes and custom sizes available. Replacement Oil-Only Absorbent Pillows Available for Oil/Sediment Model Ultra-GrateGuards.

Protect Curb And Gutter Inlets From Sediment And Other Contaminants

• For use with curb openings with street grates.
• Patented design helps industrial and construction activities capture sediment, debris and oil runoff before they enter the stormwater system.
• Available in several standard lengths. Custom sizes also available.
• Helps comply with NPDES, 40 CFR 122.26 (1999) and TMDl requirements.

Part# 9284-SED

Sediment Only Model, 18" x 24" x 4" (458 mm x 610 mm x 102 mm)

Part# 9289-SED

Sediment Only Model, 24" x 48" x 4" (610 mm x 1220 mm x 102 mm)

Part# 9284-0/S

Oil/Sediment Model, 18" x 24" x 4" (458 mm x 610 mm x 102 mm)

Part# 9289-0/S

Oil/Sediment Model, 24" x 48" x 4" (610 mm x 1220 mm x 102 mm)

Other stock sizes and custom sizes available. Replacement Oil-Only Absorbent Socks available for Oil/Sediment Model Ultra-GrateGuards.

Keep Dirt And Sediment Out Of Storm Drains With Easy-To-Install Ultra-GrateGuard Plus

• One size fits all.
• Installs quickly and easily with included hardware - grate does not need to be moved or lifted.
• Rugged, polymer components will not rust or corrode.
• Built-in overflow port eliminates ponding and flooding during major rainfall events.
• Woven polypropylene construction provides superior strength and durability.
• Available for standard street drains and combination drains (street drains with curb inlets).

Part# 9130

Ultra-GrateGuard Plus, fits drains up to 60" x 60"

Part# 9142

Ultra-GrateGuard Plus, Curb-Style for combination drains, fits grates up to 60" x 60" and curb inlets 22"-35"

Part# 9143

Ultra-GrateGuard Plus, Curb-Style for combination drains, fits grates up to 60" x 60" and curb inlets 36"-60"

Protect Drains and Inlets WITHOUT Lifting Any Grates

• Keeps dirt, sand, sediment, trash and debris out of drains.
• Quick and easy installation using built-in magnets - no more lifting of heavy catch basin grates.
• Available in several sizes for street drains and combination drains. Custom sizes also available.
• Heavy-duty, reinforced material allows up to 192 gal/ft2/min. through drains.
• low maintenance - simply remove unit, shake off excess dirt, silt and sediment and put back in place. low-profile design can be driven over and is unobtrusive to traffic and personnel.

Part# 9170

24" x 24" (610 mm x 610 mm)

Part# 9173

24" x 24" (610 mm x 610 mm) Curb-Style (for combination drains)

Part# 9171

24" x 36" (610 mm x 915 mm)

Part# 9174

24" x 36" (610 mm x 915 mm) Curb-Style (for combination drains)

Part# 9172

24" x 48" (610 mm x 1220 mm)

Part# 9175

24" x 48" (610 mm x 1220 mm) Curb-Style (for combination drains)

Remove Concentrated Contaminants at "Hot Spot" Drains

• Removes hydrocarbons, organically bound metals, sediments and other organics from stormwater and industrial runoff.
• Patented dual media filtration system provides consistent removal efficiencies.
• Sealed, filtered system uses Sorb 44 and activated carbon to remove contaminants from water flow.
• By-pass system prevents flooding or ponding during high-flow storm events.
• Excellent post construction control for "hot spot" applications. (Drains that are more susceptible to large concentrations of contaminants.)
• Units available for round or square catch basin grates. Custom sizes available.
• Considered a "true filter" and has been verified by the EPA's ElY program.
• Helps comply with NPDES, 40 CFR 122.26 (1999) when used as Best Management Practice in Storm Water Pollution Prevention Plans.

Part# 9350

Fits drains 20" - 25" (508 mm x 635 mm)

Part# 9351

Fits drains 26" - 33" (660 mm x 838 mm)

Part# 9352

Fits drains 34" - 50" (863 mm x 1219 mm)

Part# 9354

Fits drains 48+" (1219+ mm)

Part# 9355

Replacement media

Custom sizes also available.

Keep Oil, Sediment, Floatables And Other Contaminants Out Of Curb Inlets

• For use in drains with curb inlets only.
• Two heavy-duty tension rods keep unit secured inside inlet for a clean, flush-mounted installation.
• Filtering material is quickly and easily replaced.
• Helps comply with NPDES, 40 CFR 122.26 (1999) and TMDL requirements.

Part# 9760

Ultra-CurbGuard, Insert Style

Fits 22" - 35" (559 mm x 889 mm) inlets

Part# 9761

Ultra-CurbGuard, Insert Style

Fits 36" - 60" (915 mm x 1524 mm) inlets

Keep Sediment, Oil And Debris Out Of Curb Inlets And Storm Drains

• For use with curb openings without street grates.
• Available in several standard lengths.
• Custom sizes also available.
• Patented design allows clean water to flow through while trapping sediment and/or oil depending on the model.
• Helps comply with NPDES, 40 CFR 122.26 (1999) and TMDL requirements.

Other stock sizes and custom sizes available. Replacement Oil-Only Absorbent Socks available for Oil/Sediment Model Ultra-CurbGuards.

Protect Curb Inlets From Sediment-laden Stormwater Runoff

• Quick and easy installation.
• Modular design - build to any length.
• 3' long units can be quickly and easily connected to form longer lengths.
• Wedge-shaped, heavy-duty foam secures unit in curb inlet.
• Woven, polypropylene material provides high flow rate - will not cause ponding or flooding.
• Helps comply with NPDES, 40 CFR 122.26 (1999) and TMDL requirements.

Stop Pollutants Before They Can Reach Stormwater Outflow

• Stormwater is forced to flow through bottom of unit - floating trash and hydrocarbons remain on the water's surface and out of the outflow.
• Installs quickly and easily in storm drain outflows.
• Low-profile allows vactor trucks to clean catch basin without removing the unit.
• Dual component, all-polyethylene unit will not rust or corrode.
• Helps comply with NPDES, 40 CFR 122.26 (1999) and TMDL requirements.

Part# 9380

8" (204 mm) Center Opening

4 1/2" X 12" X 14" (115 mm x 305 mm x 356 mm)

4 lbs. (2 kg)

Part# 9381

10" (254 mm) Right Opening

5 1/2" X 14" X 16" (140 mm x 356 mm x 407 mm)

6 lbs. (3 kg)

Part# 9382

10" (254 mm) Center Opening

5 1/2" X 14" X 16" (140 mm x 356 mm x 407 mm)

6 lbs. (3 kg)

Part# 9383

10" (254 mm) Left Opening

5 1/2" X 14" X 16" (140 mm x 356 mm x 407 mm))

6 lbs. (3 kg)

Part# 9384

12" (305 mm) Center Opening

6 1/2" X 16 3/8" X 18" (166 mm x 416 mm x 458 mm)

7 lbs. (3 kg)

Part# 9385

8" (204 mm) Adapter

7 3/4" X 8" X 12" (197 mm x 204 mm x 305 mm)

1.5 lbs. (1 kg)

Part# 9386

10" (254 mm) Adapter

9 1/2" X 10" X 12" (242 mm x 254 mm x 305 mm)

2 lbs. (1 kg)

Part# 9387

12" (305 mm) Adapter

11" X 12" X 12" (280 mm x 305 mm x 305 mm)

3 lbs. (1.5 kg)

Note: Adapter is required for any Ultra-Oil & Debris Blocker installation.

Guard High-Flow Curb Inlets From Silt, Sediment And Other Contaminants

• Designed for curb inlets with high-flow volumes.
• Unique, multi-dimensional outer filter combined with rigid inner frame maintains a low profile to prevent damage from vehicular traffic.
• Modular, 3-foot inner frames allow for compact transport and storage.
• Counterweight inserts into inlet to keep unit upright and secure - see inset photo (optional 7 lb. weight available).
• Tie-back straps on either end of unit can be used with sod pin or stake for additional anchoring.
• Can be easily cleaned and reused.
• Helps comply with NPDES, 40 CFR 122.26 (1999).

Part# 9151

Dimensions: 6' L x 6" H (1829 mm x 152 mm)

Weight: 10 lbs. (4.5 kg)

Part# 9158

Dimensions: 9' L x 6" H (2743 mm x 152 mm)

Weight: 13 lbs. (6 kg)

Part# 9154

Dimensions: 12' L x 6" H (3658 mm x 152 mm)

Weight: 16 lbs. (7 kg)

Part# 9159

Dimensions: 15' L x 6" H (4572 mm x 152 mm)

Weight: 20 lbs. (9 kg)

Part# 9148

Dimensions: 14" L x 1 1/2" dia. (356 mm x 38 mm dia.)

Weight: 7 lbs. (3 kg)

Keep Sediment And Other Debris Out of Curb Inlets

• Made of 100% recycled materials.
• Can be reused - simply remove, clean and store properly until needed again.
• Built-in overflow ports allow water to pass through during major rainfall events.
• Helps comply with NPDES, 40 CFR 122.26 (1999) and TMDl requirements.
• Quick and easy installation - no stakes, weights or hardware required. Simply place in front of curb inlet assuring at least a 12" overlap on each side.

Part#

Dimensions

9320

9" dia. x 8' L (229 mm dia. x 2438 mm L)

9321

9" dia. x 10' L (229 mm dia. x 3048 mm L)

9322

9" dia. x 12' L (229 mm dia. x 3658 mm L)

• Ergonomically designed - minimizes potential injuries associated with heavy lifting.
• Allows single-person grate lifting - reduces personnel and maintenance costs.
• Disassembles quickly for easy transport - optional two-piece carrying case available (Part# 9241).
• Part# 9234, 74 lbs. (34 kg).

• Heavy duty steel hook fits all grates ­ protects hands from injury.
• Part# 9235, weight 3 Ibs. (2 kg).

Remove Oil Permanently From Catch Basins And Storm Drains

• Unique polymer absorbent actually bonds the oil to the polymer matrix and prevents leaching.
• Will not create ponding or clog due to sediment.
• One 22" x 14" x 2" unit can hold up to 2 gallons of oil.
• Floats on water surface ­continuously absorbs oil.
• Helps comply with NPDES, 40 CFR 122.26 (1999) and TMDL requirements.

Contain Sediment And Oil Pumped Out During Dewatering Operations

• Retains both oil and sediment, offering a combination of benefits not available in alternative dewatering bags.
• Standard and custom sizes available.
• Accommodates up to 6" discharge hose.
• Helps comply with NPDES, 40 CFR 122.26 (1999) when used as Best Management Practice in Storm Water Pollution Prevention Plans

Part# 9729-O/S

Oil/Sediment Model, 3' x 4'

Part# 9724-O/S

Oil/Sediment Model, 6' x 6'

PartH 9725-O/S

Oil/Sediment Model, 10' x 15'

Part# 9727-O/S

Oil/Sediment Model, 15' x 15'

Other stock sizes and custom sizes available.

Dewatering Bag For Large Jobs or Heavy Sediment Loads

• Use for dewatering operations with large quantities of silt, sediment or dirt.
• Large 3'-5' opening allows easy access and removal of trapped sediment.
• Galvanized steel locking Rods (Part# 9735) are quickly and easily installed to secure bag opening during dewatering.
• Helps comply with NPDES, 40 CFR 122.26 (1999).

Part# 9730

3' x 5' Bag with Locking Rods

Part# 9732

5' x 7' Bag with Locking Rods

Part# 9735

Locking Rods only

Part# 9736

Replacement Bag, 3' x 5'

Part# 9738

Replacement Bag, 5' x 7'

Reduce Oil and Sediment Flowing Through Trench Drains and Pipes

• Filter design forces water to flow around and through a series of X- TEX filter strips - sand, silt and sediment are trapped between the strips while hydrocarbons are absorbed by the X- TEX material.
• Unit has a 10ft. x 2ft. section of filter strips - nylon cord is sewn along the entire length of the fabric for added strength.
• Loops on each end allow TrenchFilters to be connected together for long runs of trench/pipe.
• Ten-foot cord (included) can be used to tie off TrenchFilter and secure it in place.
• Helps comply with NPDES, 40 CFR 122.26 (1999) and TMDL requirements

Part# 9700

Minimize Erosion and Sediment Runoff
UItra-StormWattle Fiber Rolls are made with wheat straw, and bound into a tight tubular roll. When StormWattles are placed on the face of slopes, they intercept stormwater runoff, reduce
its flow velocity, release the runoff as sheet flow, and provide removal of sediment from the runoff. By interrupting the length of a slope, the Ultra-StormWattle fiber roll can also reduce erosion.

• Use instead of silt fence to reduce erosion at construction sites - stops sediment and other debris from entering retentions ponds, lakes and other water bodies.
• Environmentally-friendly - units can be left in place to eventually "mulch in" with surrounding environment.
• Less intrusive and conspicuous than silt fence - perfect for use in ongoing residential and commercial construction projects.
• Installation is quick and easy - simply dig shallow trench and stake in place.
• Can be used as check dams to reduce water velocity.
• Requires no maintenance or upkeep.
• Helps comply with NPDES, 40 CFR 122.26 (1999).

ULTRA-STORMWATTLES CAN BE USED:

• Along the toe, top, face, and at grade breaks of exposed and erodible slopes to shorten slope length and spread runoff as sheet flow.
• At the end of a downward slope where it transitions to a steeper slope.
• Along the perimeter of a project.
• As check dams in unlined ditches.
• Down-slope of exposed soil areas.
• Around temporary stockpiles.
• As a sediment filter surrounding catch basins.
• As a sediment filter in front of curb inlets.
• For soil stabilization after forest fires.
• To promote revegetation.

Part #

Dimensions

9750

9" dia. x 10' L (229 mm dia. x 3048 mm L), 20 per pallet

9745

9" dia. x 14' L (229 mm dia. x 4267 mm L), 20 per pallet

9741

9" dia. x 25' L (229 mm dia. x 7620 mm L), 5 per pallet

9742

12" dia. x 10' L (305 mm dia. x 3048 mm L), 7 per pallet

9743

12" dia. x 25' L (305 mm dia. x 7620 mm L), 3 per pallet

9770

20" dia. x 8' L (508 mm dia. x 2438 mm L), 15 per pallet