Keep Sediment And Other Pollutants From Entering The Water System With Ultra-DrainGuard Catch Basin Inserts
Designed For Practical Use In:
Industrial Facilities - keep oil and other contaminants from entering storm drains.
Construction Sites - capture eroded soil and wind-blown debris.
Parking Lots, "Drive-Up" Retail Facilities­selected geotextiles collect oil, fuel and other contaminants that drip from cars.
Oil & Sediment Model (Part# 9217/9218/9356) - removes hydrocarbons, dirt, sand and other contaminants.
Oil & Sediment Plus Model (Part# 9219/9220/9358) - the addition of X-TEX filter strips increases oil and grease absorption.
Trash & Debris Model (Part# 9227/9229) - designed specifically to catch larger items and floatables such as leaves, cigarette butts and paper goods.
Helps comply with NPDES, 40 CFR 122.26 (1999).

OIL & SEDIMENT MODEL

OIL & SEDIMENT PLUS MODEL

TRASH & DEBRIS MODEL

Part#

9217 (1-Pack)
9218 (10-Pack)
9356, 60" x 60" (1-Pack)

9219 (1-Pack)
9220 (10-Pack)
9358, 60" x 60" (1-Pack)

922 7 (l-Pack)
9229 (10-Pack)

Weight per unit

9217/9218 - 1 lb.
9356 - 2 lbs.

9219/9220 - 2 lbs.
9358 - 3 lbs.

1 lb.

Dimensions

9217/9218 - 48" L x 36" W x 18" H
9356 - 60" L x 60" W x 18" H

9219/9220 - 48" L x 36" W x 18" H
9358 - 60" L x 60" W x 18" H

48" Lx 36" W x 18" H

Performance

9217/9218 - Up to .87 gallons of oil and up to 40 lbs. of sediment
9356 - Up to 1.55 gallons of oil and up to 40 lbs. of sediment

9219/9220 - Up to 1.38 gallons of oil and up to 40 lbs. of sediment
9358 - Up to 2.06 gallons of oil and up to 40 lbs. of sediment

1 cu. ft. (before reaching bypass ports)

Accessories

Grate Lifter (Part# 9234), Grate Hook (Part# 9235), Retainers (Part# 9237 or 9238).

Custom sizes are available.

Capture Dirt and Sediment At Construction Sites and Other "High Erosion" Area.

• Rugged polypropylene construction can be easily rinsed and reused.
• Deep accumulation pocket (36") can hold up to 500 Ibs. of soil, sand, sediment and dirt.
• Designed for easy removal with backhoe, forklift or other equipment.
• Custom sizes available.
• Helps comply with NPDES, 40 CFR 122.26 (1999).

Part#

Dimensions

9341

24" x 24"

9340

24" x 36"

9342

24" x 48"

9332

24" x 24", Curb-Style

9330

24" x 36", Curb-Style

9331

24" x 48", Curb-Style

Stop Silt, Sediment And Other Debris From Entering Curb Inlets And Catch Basins

• For use with combination catch basins with a street grate and curb opening.
• Heavy-duty tension rod secures DrainGuard inside curb inlet - stopping sediment and other contaminants from entering curb portion of storm drain.
• Fits grate sizes up to 40" x 40" and curb inlets up to 60" wide.
• Helps comply with NPDES, 40 CFR 122.26 (1999).

Part# 9230

Oil & Sediment Model, for curb inlets from 24" - 42"

Part# 9231

Oil & Sediment Model, for curb inlets from 42" - 60"

Part# 9239

Oil & Sediment Plus Model, for curb inlets from 24" - 42"

Part# 9240

Oil & Sediment Plus Model, for curb inlets from 42" - 60"

Custom sizes available.

Keep Oil, Sediment, Floatables And Other Contaminants Out Of Curb Inlets

• For use in drains with curb inlets only.
• Two heavy-duty tension rods keep unit secured inside inlet for a clean, flush-mounted installation.
• Filtering material is quickly and easily replaced.
• Helps comply with NPDES, 40 CFR 122.26 (1999) and TMDL requirements.

Part# 9760

Ultra-CurbGuard, Insert Style

Fits 22" - 35" (559 mm x 889 mm) inlets

Part# 9761

Ultra-CurbGuard, Insert Style

Fits 36" - 60" (915 mm x 1524 mm) inlets

Keep Dirt And Sediment Out Of Storm Drains With Easy-To-Install Ultra-GrateGuard Plus

• One size fits all.
• Installs quickly and easily with included hardware - grate does not need to be moved or lifted.
• Rugged, polymer components will not rust or corrode.
• Built-in overflow port eliminates ponding and flooding during major rainfall events.
• Woven polypropylene construction provides superior strength and durability.
• Available for standard street drains and combination drains (street drains with curb inlets).

Part# 9130

Ultra-GrateGuard Plus, fits drains up to 60" x 60"

Part# 9142

Ultra-GrateGuard Plus, Curb-Style for combination drains, fits grates up to 60" x 60" and curb inlets 22"-35"

Part# 9143

Ultra-GrateGuard Plus, Curb-Style for combination drains, fits grates up to 60" x 60" and curb inlets 36"-60"

Replace Messy Hay Bales And Keep Sediment And Oil From Entering Drains And Inlets

• Two standard sizes: Part# 9292 fits up to 24" x 24" grates. Part# 9293 fits up to 4' x 6' grates.
• Helps comply with NPDES, 40 CFR 122.26 (1999).

Partll 9292-0/S

Oil/Sediment Model, 36" dia.

Part# 9293-0/S

Oil/Sediment Model, 4' x 6'

Other stock sizes and custom sizes available.

Remove Concentrated Contaminants at "Hot Spot" Drains

• Removes hydrocarbons, organically bound metals, sediments and other organics from stormwater and industrial runoff.
• Patented dual media filtration system provides consistent removal efficiencies.
• Sealed, filtered system uses Sorb 44 and activated carbon to remove contaminants from water flow.
• By-pass system prevents flooding or ponding during high-flow storm events.
• Excellent post construction control for "hot spot" applications. (Drains that are more susceptible to large concentrations of contaminants.)
• Units available for round or square catch basin grates. Custom sizes available.
• Considered a "true filter" and has been verified by the EPA's ElY program.
• Helps comply with NPDES, 40 CFR 122.26 (1999) when used as Best Management Practice in Storm Water Pollution Prevention Plans.

Part# 9350

Fits drains 20" - 25" (508 mm x 635 mm)

Part# 9351

Fits drains 26" - 33" (660 mm x 838 mm)

Part# 9352

Fits drains 34" - 50" (863 mm x 1219 mm)

Part# 9354

Fits drains 48+" (1219+ mm)

Part# 9355

Replacement media

Custom sizes also available.

Keep Sediment And Other Debris Out of Curb Inlets

• Made of 100% recycled materials.
• Can be reused - simply remove, clean and store properly until needed again.
• Built-in overflow ports allow water to pass through during major rainfall events.
• Helps comply with NPDES, 40 CFR 122.26 (1999) and TMDl requirements.
• Quick and easy installation - no stakes, weights or hardware required. Simply place in front of curb inlet assuring at least a 12" overlap on each side.

Part#

Dimensions

9320

9" dia. x 8' L (229 mm dia. x 2438 mm L)

9321

9" dia. x 10' L (229 mm dia. x 3048 mm L)

19322

9" dia. x 12' L (229 mm dia. x 3658 mm L)

Protect Curb Inlets From Sediment-laden Stormwater Runoff

• Quick and easy installation.
• Modular design - build to any length.
• 3' long units can be quickly and easily connected to form longer lengths.
• Wedge-shaped, heavy-duty foam secures unit in curb inlet.
• Woven, polypropylene material provides high flow rate - will not cause ponding or flooding.
• Helps comply with NPDES, 40 CFR 122.26 (1999) and TMDL requirements.

• Ergonomically designed - minimizes potential injuries associated with heavy lifting.
• Allows single-person grate lifting - reduces personnel and maintenance costs.
• Disassembles quickly for easy transport - optional two-piece carrying case available (Part# 9241).
• Part# 9234, 74 lbs. (34 kg).

• Heavy duty steel hook fits all grates ­ protects hands from injury.
• Part# 9235, weight 3 Ibs. (2 kg).

Minimize Erosion and Sediment Runoff
UItra-StormWattle Fiber Rolls are made with wheat straw, and bound into a tight tubular roll. When StormWattles are placed on the face of slopes, they intercept stormwater runoff, reduce
its flow velocity, release the runoff as sheet flow, and provide removal of sediment from the runoff. By interrupting the length of a slope, the Ultra-StormWattle fiber roll can also reduce erosion.

• Use instead of silt fence to reduce erosion at construction sites - stops sediment and other debris from entering retentions ponds, lakes and other water bodies.
• Environmentally-friendly - units can be left in place to eventually "mulch in" with surrounding environment.
• Less intrusive and conspicuous than silt fence - perfect for use in ongoing residential and commercial construction projects.
• Installation is quick and easy - simply dig shallow trench and stake in place.
• Can be used as check dams to reduce water velocity.
• Requires no maintenance or upkeep.
• Helps comply with NPDES, 40 CFR 122.26 (1999).

ULTRA-STORMWATTLES CAN BE USED:

• Along the toe, top, face, and at grade breaks of exposed and erodible slopes to shorten slope length and spread runoff as sheet flow.
• At the end of a downward slope where it transitions to a steeper slope.
• Along the perimeter of a project.
• As check dams in unlined ditches.
• Down-slope of exposed soil areas.
• Around temporary stockpiles.
• As a sediment filter surrounding catch basins.
• As a sediment filter in front of curb inlets.
• For soil stabilization after forest fires.
• To promote revegetation.

Part #

Dimensions

9750

9" dia. x 10' L (229 mm dia. x 3048 mm L), 20 per pallet

9745

9" dia. x 14' L (229 mm dia. x 4267 mm L), 20 per pallet

9741

9" dia. x 25' L (229 mm dia. x 7620 mm L), 5 per pallet

9742

12" dia. x 10' L (305 mm dia. x 3048 mm L), 7 per pallet

9743

12" dia. x 25' L (305 mm dia. x 7620 mm L), 3 per pallet

9770

20" dia. x 8' L (508 mm dia. x 2438 mm L), 15 per pallet

Economical And Versatile Sand Bags Have Many Uses

• Can be filled with sand, gravel or other aggregate.
• Sewn-in ties can be used to quickly close off bags.
• Use for flood control, counter balance, temporary barriers, etc.
• Woven monofilament construction - long lasting and durable.
• Large, cubic-yard bags also available (3,000-lb. capacity).

Prevent Erosion And Keep Sediment Out Of Storm Drains And Waterways
Ultra-SiltFence is conveniently shipped in pre-assembled 100-foot lengths. Includes 2" square, sharpened, hard­wood stakes with 3 staples to hold the silt-controlling, polypropylene material firmly in place.

• Contractor-grade material in heights of 24" and 36".
• Easy and economical way to meet erosion and sediment control requirements at construction sites.
• DOT-grade material available.
• Helps comply with NPDES, 40 CFR 122.26 (1999).
  

Contain Sediment And Oil Pumped Out During Dewatering Operations

• Retains both oil and sediment, offering a combination of benefits not available in alternative dewatering bags.
• Standard and custom sizes available.
• Helps comply with NPDES, 40 CFR 122.26 (1999).

Part# 9729-O/S

Oil/Sediment Model, 3' x 4'

Part# 9724-O/S

Oil/Sediment Model, 6' x 6'

PartH 9725-O/S

Oil/Sediment Model, 10' x 15'

Part# 9727-O/S

Oil/Sediment Model, 15' x 15'

Other stock sizes and custom sizes available.

Dewatering Bag For Large Jobs or Heavy Sediment Loads

• Use for dewatering operations with large quantities of silt, sediment or dirt.
• Large 3'-5' opening allows easy access and removal of trapped sediment.
• Galvanized steel locking Rods (Part# 9735) are quickly and easily installed to secure bag opening during dewatering.
• Helps comply with NPDES, 40 CFR 122.26 (1999).

Part# 9730

3' x 5' Bag with Locking Rods

Part# 9732

5' x 7' Bag with Locking Rods

Part# 9735

Locking Rods only

Part# 9736

Replacement Bag, 3' x 5'

Part# 9738

Replacement Bag, 5' x 7'

Triangular Silt Dike™ Barrier Systems Help Contain Eroded Soils

• Designed as an effective and economical alternative to straw bales, silt fence and rock check dams.
• Patented design provides effective erosion and sediment control.
• Aprons on either side of Dike prevent erosion and failure of the structure. Optional, U-shaped wire staples help secure unit in place and conform to rough terrain.
• Lightweight and durable construction - installs in minutes.
• Multiple units can be installed side-by-side for larger areas.
• Other uses include: ditch check dams, diversion dikes, drop inlet protection, continuous barrier, temporary ditch liner and stream and pond protection.
• Helps comply with NPDES, 40 CFR 122.26 (1999).

Part# 9712

Dimensions:

84" L x 67" W x 10.5" H (2134 mm x 1702 mm x 267 mm)

Weight: 8 Ibs. (3.5 kg)

Options: U-Shaped Staples (Part# 9714)

Control The Flow Of Sediment And Oil Out Of Headwall And Other Types Of Pipes

• Use in pond applications where vertical pipes extend above the water surface, and preventing sediment in-flow during high-water events is
  required.
• Several standard and custom sizes available.
• Helps comply with NPDES, 40 CFR 122.26 (1999).

Part# 9705-O/S

Oil/Sediment Model, for 8" dia. Pipe, 60" L (204 mm dia., 1524 mm L)

Part# 9706-O/S

Oil/Sediment Model, for 12" dia. Pipe, 60" L (305 mm dia., 1524 mm L)

Part# 9707-O/S

Oil/Sediment Model, for 16" dia. Pipe, 60" L (407 mm dia., 1524 mm L)

Other stock sizes and custom sizes available.

Reduce Oil and Sediment Flowing Through Trench Drains and Pipes

• Filter design forces water to flow around and through a series of X- TEX filter strips - sand, silt and sediment are trapped between the strips while hydrocarbons are absorbed by the X- TEX material.
• Unit has a 10ft. x 2ft. section of filter strips - nylon cord is sewn along the entire length of the fabric for added strength.
• Loops on each end allow TrenchFilters to be connected together for long runs of trench/pipe.
• Ten-foot cord (included) can be used to tie off TrenchFilter and secure it in place.
• Helps comply with NPDES, 40 CFR 122.26 (1999).

Part# 9700

Remove Pollutants From Stormwater Flow In Gutters and Downspouts

• Special "X- TEX" oil-absorbing filter material removes oil, grease and other hydrocarbons from gutter and downspout waterflow.
• Quick and easy to install on most downspouts.
• Filter material is easily removed and replaced.
• Polyethylene construction will not rust or corrode.
• Helps comply with NPDES, 40 CFR 122.26 (1999).

Part# 9315

Ultra-DownSpoutGuard

17 lbs.

Part# 9316

Refill for Ultra-DownSpoutGuard

4 lbs.

Total absorption capacity: 8 gallons of hydrocarbons

Catch And Trap Oil Drips Before They Can Reach The Ground

• Use under machinery and equipment to catch fluid leaks during maintenance or repairs.
• Rolls or folds into small package ­store in vehicles for onsite repairs.
• Keep floors free of oily mess - reduce slip hazards.
• Three-layer system provides maximum protection:

Top layer: UV resistant geotextile fabric - allows oils to pass through.
Middle layer: Absorbent core ­oil-only polypropylene traps oils but allows stormwater to evaporate.
Bottom layer: Impermeable backing keeps drips from leaching through to the ground or shop floor.

• Helps comply with NPDES, 40 CFR 122.26 (1999).

Part#

Dimensions

Capacity

Weight

8305

5' x 5'

Up to 3 gallons

4lbs.

8306

10' x 10'

Up to 12 gallons

6lbs.

Keep Messy Drips and Spills Off Warehouse and Factory Floors

• Heavy-duty polyethylene construction ­ will not rust or corrode.
• Ribbed bottom keeps cans, pails and other containers elevated above any spills or leaks.
• Stackable for easy storage when not in use.
• Available in six sizes for a variety of applications.

Part# 1033: 30" x 48" x 4 3/4" ID • 30 gallons

Polyethylene Drum Racks Capture Spills, Keep Your Workplace Clean And Safe

• All DrumRack Models tilt the drums slightly forward, allowing maximum drainage - optimize your use of chemicals while minimizing waste.
• Ultra-DrumRack Systems improve worker safety by keeping slippery chemicals and oils off the plant floor.
• All models meet SPCC, EPA Container Storage Regulation 40 CFR 264.175 and Uniform Fire Code Spill Containment Regulations.

1-Drum System

2-Drum System

4-Drum System

Part# 2386: no drain Part# 2387: w/drain

Part# 2383: no drain Part# 2384: w/drain

Part# 2380: no drain Part# 2381: w/drain

Dimensions: 52" x 29" x 49 1/2"

Dimensions: 53" x 53" x 44 3/4"

Dimensions: 53" x 53" x 77 3/4"

Weight: 93 lbs.

Weight: 137 lbs.

Weight: 189 lbs.

Load Capacity: 750 lbs.

Load Capacity: 1,500 lbs.

Load Capacity: 3,000 lbs.

Containment Capacity: 66 gallons

Containment Capacity: 66 gallons

Containment Capacity: 66 gallons

Includes: SpillPallet and DrumRack Pl

Includes: SpillPallet and DrumRack P2

Includes: SpillPallet and (2) DrumRack P2s

Options: Dispensing Shelf Part# 2390, DrumRack Pl Part# 9030, DrumRack P2 Part# 2389, Locator Pins Part# 2391.

Drum Handling, Dispensing and Containment in One Unit

• Rugged polyethylene construction offers excellent chemical resistance.
• Unlike alternative products, the open containment sump does not require spills to flow inside the double walls to meet EPA regulations - easy to clean; eliminates residue concerns as related to compatibility.
• Can be used with 55- or 30-gallon drums - nylon strap keeps drums secure.
• Ergonomically designed for safe and easy handling.
• large 10" wheels roll easily over shop and factory floors.
• Part# 1312 has large, pneumatic wheels for soft or uneven surfaces.
• large containment sump (66 gallons) meets SPCC and EPA Containment Regulations.

Nearly 50% lower than standard spill pallets, drum handling is safer and less strenuous.

• Available in 1-drum, 2-d rum and 4-drum configurations.
• Removable grates feature a non-slip surface.
• Superior weight capacity of the 4-drum model also allows use with IBC tanks.
• All models meet SPCC and EPA Container Storage Regulation 40 CFR 264.175 for use with drums.

Part# 9606: no drain

Part# 9607: with drain

Part# 9610: no drain

Part# 9611: with drain

Part# 9630: no drain

9631: with drain

Dimensions: 40" x 40" x 12"

Weight: 51 lbs.

Dimensions: 65 1/2" x 40" x 8 3/4"

Weight: 88 lbs.

Dimensions: 62" x 62" x 8 3/4"

Weight: 125 lbs.

Uniformly Distributed Load:

Containment Capacity:

Uniformly Distributed Load:

Containment Capacity:

Uniformly Distributed Load:

Containment Capacity:

8001bs.

62 gallons

4,500 lbs.

66 gallons

9,000 lbs.

75 gallons

Options Available: Polyethylene Loading Ramp, PullOver Covers

• Available in·2-drum and 4-drum configurations.
• Applications for the all-polyethylene units include satellite waste collection and storage of virgin chemicals.
• Black color helps hide dirt and grime.
• Meet SPCC, EPA Container Storage Regulation 40 CFR 264.175 and Uniform Fire Code Spill Containment Regulations.

Ultra-Spill Pallet P4-3000

Ultra-Spill Pallet P2-1500

Part# 1112: no drain

Part# 2504: no drain

Part# 1113: with drain

Part# 2505: with drain

Dimensions: 53" x 53" x 11 3/4"

Dimensions: 53" x 29" x 16 1/2"

Weight: 85 lbs.

Weight: 63 lbs.

Uniformly Distributed Load: 3,000 lbs.

Uniformly Distributed Load: 1,500 lbs.

Containment Capacity: 66 gallons

Containment Capacity: 66 gallons

Optional PullOver Covers, Part# 1006 Optional Loading Ramp, Part# 0678

Optional PullOver Covers, Part# 1016

Unique Design Combines A Variety Of Material Handling Capabilities With Spill Control
Ultra-SpillKing features a removable deck with 4-way forklift access. Combined with its 8S-gall containment sump, drum handling and storage have never been safer.

Drum Pallet and Sump

Drum Pallet Only

Part# 0801: no drain
Part# 0802: with drain

Part# 3000801

Dimensions: 51" x 51" x 171/2"

Dimensions: 483/4" x 48 3/4" x 5 1/2"

Weight: 110 lbs.

Weight: 57 lbs.

Uniformly Distributed Load: 6,500 lbs. static

Uniformly Distributed Load: 15,000 lbs. static

Containment Capacity: 85 gallons

The Only l-Drum, Lockable Outdoor Containment Unit Available

• Convenient "roll-top" cover slides up and out of the way - allows quick access to drum pumps and funnels.
• 100% polyethylene construction will not rust or corrode.
• Safe Handling - can be moved by forklift under the "shoulder" area or wheeled with the optional dolly.
• Meets SPCC and EPA Container Storage Regulation 40 CFR 264.175.
• Helps meet new Stormwater Management Regulations - NPDES, 40 CFR 122.26 (1999).

Ultra-HardTop Pl Plus

Dolly

Part# 9640: no drain
Part# 9641: with drain

Part# 0417

Dimensions: 36" x 36" x 66"

Dimensions: 26 1/2" x 26 1/2" x 5"

Weight: Top 36 Ibs. Weight: Bottom 26 Ibs.

Weight: 31 lbs.

Load Capacity: 800 lbs.

Load Capacity: 800 lbs.

Containment Capacity: 64 gallons

Construction: Steel

Safely Store 4 Drums Outdoors

• Unique "dual closure" offers significant ergonomic and convenience benefits - drums are easily accessed from either side.
• Roll-top covers can be easily lifted from waist height to access drum tops - no need to reach near ground level.
• low profile (8 3/4") containment pallet positions drum­tops at a safe, convenient level to pour wastes into funnels or to use drum pumps.
• Forkliftable, lockable, all-polyethylene construction will not rust or corrode.
• Helps meet new Stormwater Management Regulations ­NPDES, 40 CFR 122.26 (1999).
• Meets SPCC and EPA Container Storage Regulation 40 CFR 264.175.

Part# 9636: no drain

Weight: 440 Ibs.

Part# 9637: with drain

Containment Capacity: 75 gallons

Outside Dimensions: 64 1/2" x 62" x 79"

Uniformly Distributed Load: 9,000Ibs.

Options: Loading Ramp (part# 0676) - stores inside containment unit when not in use

Ultra-HardTop P2 Plus is lockable with a standard padlock, and can be safely lifted by forklift with drums in place.

• Tall 23 3/4" head space easily accommodates rotary drum pumps and large conical funnels.
• Low profile (8 3/4") containment pallet positions drum-top funnels at a safe, convenient level to pour hazardous wastes.
• 100% polyethylene construction will not rust or corrode.
• Meets SPCC, EPA Container Storage Regulation 40 CFR 264.175 and Uniform Fire Code Spill Containment·Regulations.
• Helps meet new Stormwater Management Regulations ­ NPDES, 40 CFR 122.26 (1999).

Ultra-HardTop P2 Plus

Loading Ramp

Part# 9612: no drain  Part# 9613: with drain

Part# 0676

Dimensions: 67 1/4" x 41 1/4" x 74"

Dimensions: 46" x 28" x 8 3/4"

Weight: 260 Ibs.

Weight: 25 lbs.

Uniformly Distributed Load: 4,500 lbs.

Surface: Non-slip

Containment Capacity: 66 gallons

Construction: Polyethylene

Four inner polyethylene columns support uniformly distributed loads of up to 8,500 lbs. All components are easily removed for cleaning.

Economical And Portable Containment For IBCs

• Low profile, 28" overall height - allows safe and convenient IRC tank handling and dispensing.
• All polyethylene construction - offers excellent cllemical resistance and will not rust or corrode.
• Forkliftable - allows convenient positioning to desired locations.
• Low-cost design with value-added features and benefits.
• Large 52" x 52" deck allows safe and convenient placement of IRC tanks.
• Small footprint - 62" x 62" unit requires minimal floor space.
• Available with optional Bucket Shelf (Part# 1160) - catches leaks or spills during dispensing.
• 360-gallon sump capacity meets SPCC and EPA Container Storage Regulations.

Ultra-IBC Spill Pallet Plus

Ultra-BucketShelf

Part# 1157: no drain
Part# 1158: with drain

Containment Capacity: 360 gallons

Part# 1160

Dimensions: 62" x 62" x 28"

Uniformly Distributed Load: 8,500 lbs.

Weight: 324 lbs.

Meets EPA Container Storage Regulation 40 CFR 264.175,

Weight: 10 lbs.

Comply With Regulations While Storing IBC Tanks Outdoors

• Upper roll-top door and lower swing-out doors combine to allow easy and convenient access to 1Be.
• Safely stores an IBC tank with maximum dimensions of 52" x 52" x 61".
• low profile (28" height), 360 gallon containment sump allows safe material handling and dispensing.
• Forkliftable, lockable, all-polyethylene design will not rust or corrode.
• Helps meet new Stormwater Management Regulations ­NPDES, 40 CFR 122.26 (1999).
• Meets SPCC and EPA Container Storage Regulation 40 CFR 264.175.

Part# 1162: no drain

Weight: 525 lbs.

Part# 1161: with drain

Containment Capacity: 360 gallons

Outside Dimensions: 64 1/2" x 62" x 96"

Uniformly Distributed Load: 8,500 lbs.