Summary of relevant information contained in the new ANSI/ISEA 107-2004 standard.
Key Definitions:
Background material: Colored fluorescent material intended to be highly conspicuous, but not intended to comply with the requirements of this standard for retroreflective material.
Fluorescent material: Material that emits optical radiation at wavelengths longer than absorbed. These materials enhance daytime visibility, especially during dawn and dusk.
Retroreflective material: Material which is a retroreflector and is either 1) not intended to comply with the requirements of this standard for background material, or 2) is a combined-performance retroreflective material.
Specific Requirements: Whenever multiple bands are placed on the garment, then bands shall be spaced in a manner which provides a minimum distance between bands of retroreflective material at least equal to the width of the band.
Whenever horizontal retroreflective materials are placed on full-length sleeves of coveralls and jackets, the material shall encircle the arm and be placed at the same height on the garment as the retroreflective material on the torso.
If upper bands are utilized, they shall encircle the upper part of the sleeves between the elbow and the shoulder. When lower placement is utilized, the bottom edge of the material shall not be less than 2 inches from the bottom of the sleeve.
Gaps in retroreflective and background materials to enable fastening shall not be more than 2 inches horizontally.
Class 1. 2, or 3 garments such as vests, waistcoats, jackets, ponchos, coveralls and bib overalls shall meet the requirements for the respective Class of high visibility safety clothing, and shall have contiguous areas of retroreflective material encircling the torso, placed in such a manner to provide 360 ° visibility of the wearer. In addition, coveralls and bib overalls shall have continuous areas of retroreflective materials encircling each leg in such a manner to provide 360 ° visibility of the wearer. Retroreflective materials on the legs shall be not more than 13.8 inches above the bottom of the legs.
Overalls or Waistband trouser may be classified as Class E garments if they have a
minimum of .07 m2 retroreflective material.

When such Class E garments are worn with a Class 2 vest, waistcoat, jacket, or poncho, the overall classification for the ensemble shall be classified as a Class 3 ensemble.
Specific Marking: Number of this specific ANSI standard (ANSI/ISEA 107-2004)
Pictogram showing the garment Class and level of performance of the retroreflective material.
Other Notes: There is no specific required layout of reflective material.
All reflective tape shall be placed no higher than 13.8 inches above the bottom of the trouser leg.
All reflective tape must be placed a minimum of 2 inches above the bottom edge of the garment and the sleeve.
Footage of Reflective Tape:
Class 1 Garments require 6.46 feet of Reflective Tape. Class 2 Garments require 12.2 feet of Reflective Tape. Class 3 Garments require 12.92 feet of Reflective Tape.
Recommended Background Colors:
Fluorescent yellow-green (Fluorescent lime-yellow) Fluorescent orange-red Fluorescent red

Summary of relevant information contained in the new ASTM F—1891-O1a standard.
Key Definitions:
Arc Rating: A term used to indicate the protection factor of a garment. With rainwear, it will always be equal to the ATPV.
Arc Thermal Performance Value (ATPV): The incident energy on a material that results in sufficient heat transfer through the material to cause the onset of a second-degree bum on human tissue.
Breakopen Threshold (EBT) or Breakopen Threshold Above Stoll (ebtas): The energy needed to cause the material to breakopen.
Calorie: The energy required to raise 1 gram of water one degree C.
Heat Attenuation Factor (HAF): The percent of energy blocked by the material.
Stoll Curve: Curve used to predict the onset of a second-degree bum on human tissue.
OSHA 1910.269 Requirement: The Employer shall not provide rainwear or clothing that will further the extent of an injury. Example: Melting and dripping rainwear can melt onto the worker's skin and cause a bum that would not have been there otherwise. The melting burn furthered the extent of the injury.
Performance Requirements: Requirements shall be met initially as manufactured as well as after five cleanings.
Leak Resistance: Material must withstand water pressure of 30 psig without leaking. The seams of the rainwear must not exhibit any evidence of leakage when exposed to 3 psig for (2) two minutes.
Tear Resistance: Material shall exhibit trapezoidal tear resistance of 6 Ibs. In the warp and 6 Ibs in the fill direction.
Flame Resistance: Material shall be flame retardant per ASTM D6413 with maximum 2 second flame out and not more than 6" char length.
Arc Thermal Performance: Material shall be tested in accordance with ASTM F1959 with 8 kA arc current, 12" gap, 12" distance, stainless steel electrodes to determine the following information:
• Arc Rating - determine and report value; no minimum value established for conformance.
• Heat Attenuation Factor - determine and report value; no minimum value established for conformance
• ebt or ebtas - determine and report value; minimum value established at 5 cal/cm2.
• Melting/Dripping - material can show NO evidence of melting or dripping at an exposure at least equal to twice the Arc Rating.
• Material response characteristics shall be reported for two typical exposures at least equal to the Arc Rating and two typical exposures at least two times the Arc Rating. Characteristics are: Afterflame time, breakopen, charring, dripping, electric arc ignition, embrittlement,, melting and shrinkage.

Arc Protective Garment Samples

Top
Example here of a failed material. Material exhibited melting and dripping as well as breakopen.

Bottom
Example here of a material that is in compliance. Even when exposed to extremely severe electric are, there is no melting, dripping or ignition.

Conspicuity Class 1

• For workers in occupations that permit full and undivided attention to approaching traffic.
• Work backgrounds are not complex.
• Pedestrian workers are separated from traffic.
High-Visibility Safety Apparel for:
• Parking lot attendants
• Shopping cart retrievers
• Warehouse workers
• Roadside or sidewalk maintenance workers
• Delivery vehicle drivers
Class 1 vests have 6.46 linear feet of 50 mm (2") trim or 9.39 linear feet of 35 mm (1-3/8") trim.

Conspicuity Class 2

• Workers require greater visibility under inclement weather conditions.
• Work backgrounds are complex.
• Tasks divert attention from approaching Vehicle traffic.

High-Visibility Safety Apparel for:
• Roadway construction workers
• Utility workers
• Survey crews
• Railway workers
• School crossing guards
• High-volume parking or toll-gate personnel
• Airport baggage handlers/ground crew
• Emergency response personnel
• Law enforcement personnel
• Accident site investigators
Class 2 garments are trimmed with 8.375 linear feet of 50 mm (2") trim or 12.2 linear feet of 35mm (l-3/8") trim.

Conspicuity Class 3

• For pedestrian workers and vehicle operators
whose high task loads place them in danger.
• Wearer must be conspicuous through the full range of body motions at a minimum of 390m (1,280 feet).
• Wearer must be identifiable as a person.
High-Visibility Safety Apparel for:
• Roadway construction workers
• Utility workers
• Survey crews
• Emergency response personnel
Class 3 garments are trimmed with 12.92 linear feet of 50 mm (2") trim.

• 2 mil exterior coating offers unbelievable snag and abrasion resistance
• Sleek coating is easy to decontaminate and provides great liquid shedding characteristics
• Heat sealed seams are stronger than the material itself and can withstand extensive laundering
• Ideal applications: Food processing, meat packing, forestry, agriculture, petrochemical and nuclear utilities

The Eagle polyurethane on nylon suit for all day wear. The most lightweight and comfortable suit we make, the Eagle suit is made of 200 denier nylon and coated on the inside with polyurethane.

• Flame retardant. Self extinguishing with flameout and afterglow less than 2 seconds after removal of ignition source. Test method: ASTM D6413-99
• Interior polyurethane coating and exterior DWR (Durable Water Repellency) coating for 100% waterproof protection
• Generously cut to fit over the heaviest of work clothes.
• Ideal applications: transportation, meat packing, utilities and municipalities

• Neoprene coating provides excellent abrasion performance and resists oils, acids, chemicals and solvents
• Stitched and taped seams are 100% liquid proof
• Nylon fabric provides excellent strength and durability
• Flame retardant. Test method: ASTM D6413-99
• Ideal applications: Forestry, mining, fishing, petrochemical, chemical and offshore drilling

Features & Benefits:

• Batwing sleeve construction and generously cut for maximum freedom of movement
• Stitched and taped seams for 100% waterproof protection
• Storm fly front seals out wind, rain and contaminants
• Corduroy tip collar for neck comfort
• Heavy duty snaps guaranteed not to fail
• Mildew resistant
• Flame retardant tested
• Chemical resistant: Animal fats, certain acids, alcohols, caustics, oils and certain solvents

• Stitch bonded non-woven lining defies punctures and tears as well as dissipating moisture
• Special PVC coating resists fats and oils
• Ideal applications: Food processing, transportation, construction, manufacturing and forestry

The American PVC on non-woven polyester suit is affordable yet comfortable. It is one of the most comfortable garments on the market.

• Lightweight coating is durable and stays supple in cold temperatures
• Non-woven lining absorbs moisture for all day comfort
• Ideal applications: Agriculture, general industry, construction and municipalities

• Heavy exterior coating for excellent permeation performance
• Light interior coating protects fabric from chemical contamination
• All seams are Therm-O-Rad sealed. No needle holes for chemicals to penetrate
• Stretch circular knit fabric and batwing sleeve construction provide maximum freedom of movement
• Tapered sleeves are designed to fit in protective gloves or accommodate glove rings for added safety
• Distinctive green color for easy identification
• Available as a coverall or a jacket and overall combination
• Ideal application: chemical environments

• Therm-O-Rad sealed seam construction for good chemical splash protection
• Thicker outside coating for better abrasion resistance
• Lighter interior coating protects fabric from chemical contamination
• Flame retardant. Self extinguishing with flameout and afterglow less than 2 seconds after removal of ignition source. Test method: ASTM D6413-99
• Ideal applications: Light chemical, construction, utilities, agriculture, food processing and general industry

• Conforms to ASTM F1891 for Arc Thermal Performance
• ANSI/ISEA 107 Class 3 compliant suit for high visibility
• Kevlar fibers added for increased tear strength and exceptional thermal stability
• Ideal applications: Line workers, trouble shooting, substation switching, pipeline services, construction

The Electra is lightweight with flame retardant PVC on Nomex. The combination of flame retardant PVC coating on non-woven Nomex provides excellent thermal performance and maintains 100% waterproof protection in a soft, lightweight rainsuit

• Conforms to ASTM F1891 for Arc Thermal Performance
• Available with ANSI/ISEA 107 Class 3 compliant reflective tape
• Ideal applications: Line workers, pipeline services, trouble shooting, construction

An innovative product that is ANSI 107 compliant for high visibility and breathability. The Vision provides all season comfort at an affordable price.

• ANSI/ISEA 107 Class 3 compliant suit and jacket for high visibility and breathability
• Designed for use in multipurpose applications
• Fluorescent yellow-green background material for excellent daytime visibility
• 2" silver reflective tape reflects light for 360º nighttime conspicuity
• Waterproof, breathable for all season comfort
• Full cut shoulder with 90º sleeve to body angle for maximum freedom of movement
• Stitched and tape sealed seams for 100% waterproof protection
• Storm fly front seals out wind and rain
• Non-conductive, non-corrosive hardware
• Roll-a-way hood in collar design for added convenience
• Easy access cargo pockets with velcro closure
• Suspenders with quick release buckles and crossover
• Elastic waist pants with adjustable drawcord
• Side openings on pants with flap closure
• Velcro take up straps on sleeves and ankle cuffs for adjustable fit
• Mildew resistant

The Icon premium ANSI compliant breathable and high visibility outerwear. Engineered to provide superior comfort and safety in the toughest work environments. Zipper/storm fly front with throat guard. D-ring access for fall protection harness. Mesh/taffeta lining.

• ANSI/ISEA 107 Class 3 compliant suit, jacket and coat for high visibility and breathability
• Loaded with premium features for multipurpose applications
• Fluorescent yellow-green background material for excellent daytime visibility
• 2" silver reflective tape reflects light for 360º nightime conspicuity
• Waterproof, breathable fabric for all season comfort
• Overhead shoulder design for complete freedom of movement
• Stitched and tape sealed seams for 100% waterproof protection
• Roll-a-way adjustable hood in collar design for added convenience
• Full vented cape back for improved air circulation
• D-ring access for fall protection harness
• Hand warmer side pockets with front cargo pockets and velcro closure
• Convenient front radio pocket
• Inner breast pocket with zipper closure
• Elastic cuffs with velcro take up straps on sleeves
• Tapered sweep with adjustable elastic draw cord on jacket for added protection
• Heavy duty suspenders with quick release buckles and crossover
• Velcro take up straps on leg cuffs
• Take up straps on overall waist for adjustable fit

• .40mm Polyurethane on stretch knit
• Stretchable material provides unsurpassed comfort
• Includes zipper front, hood in collar, take up snaps

• .20mm PVC on nylon
• Lightweight, soft and generously cut
• Includes zipper front, velcro take up snaps, pockets

• .35mm PVC on polyester
• Durability at an economy price
• Storm fly front, take up snaps, non-conductive hardware

• .50mm flame retardant PVC on polyester
• Superior durability
• Includes 2 way zipper front, hood in collar, corduroy lined collar, cargo pockets with hand warmers

• .20mm single ply PVC
• Tough enough to reuse, economical enough to discard
• Storm fly front, take up snaps and non-conductive hardware

• .25mm double ply PVC
• Lightweight and affordable
• Zipper front, take up snaps, vented cape back

• .35mm PVC on polyester
• Lighter weight, versatile and durable
• Includes zipper front, hood in collar, corduroy lined collar, take up snaps

• One size fits all poncho.
• Can be stored for use when unexpected weather hits

• ANSI / ISEA 107 Class 3 Jacket and Class E Overall create a Class 3 Suit
• Loaded with special features for multipurpose applications
• Fluorescent yellow-green or orange-red background material for excellent daytime visibility
• 2" 3M silver Scotchlite® reflects light for 360 degree conspicuity
• Batwing sleeve construction and generously cut for maximum freedom of movement
• Therm-O-Rad sealed seams for 100% waterproof protection
• Zipper / Storm fly front seals out wind, rain and contaminants
• Non-conductive hardware
• Roll-away hood in collar design for added convenience
• Full vented cape back for improved air circulation
• D-ring access for fall protection harness
• Suspenders with quick release buckles and crossover
• Easy access cargo pockets with closure
• Velcro take up straps on sleeve and ankle cuffs for adjustable fit
• Mildew resistant

The Phase 3 Soft Shell. Premium, Breathable, Water Resistant, Windproof, High Visibility Outerwear
A revolutionary 3 layer material that keeps you warm and dry, yet cool and comfortable for 3 season protection. Offers amazing warmth-to-weight ratio in a breathable, wind and water resistant system.

• Athletic apparel design and performance adapted for work environments.
• Inner fleece layer provides warmth and comfort.
• ANSI/ISEA 107 Class 3 compliant jacket.
• Breathable to ASTM E96.
• Fluorescent yellow-green background material for excellent daytime visibility.
• 2" silver reflective tape reflects light for

360º nighttime conspicuity.
Ideal Applications: For use in environments where high visibility and breathability are desired for wearer safety and comfort.

FEATURES & BENEFITS                   PHASE 3
Water resistant, breathable, insulating fabric for 3 season comfort
Overhead shoulder design for complete freedom of movement.
Stretch fabric with inner fleece layer for maximum comfort
Storm fly front and zipper front closure seals out wind and rain
Front hand warmer pockets with zipper closure
Right breast security pocket with zipper closure
Velcro take-up straps on sleeve cuffs for easy adjustment
Longer cut back with adjustable elastic draw cord for extra coverage
Charcoal gray front helps conceal dirt
Can be zipped into the Icon (J24122) outer shell for insulation

The Icon 3.1 Premium ANSI Compliant Breathable, Insulated High Visibility Outerwear system
Engineered to provide superior year round comfort and safety in the toughest work environments.

• 3 in 1 system provides year round comfort and protection.
• ANSIIISEA 107 Class 3 compliant jacket, for high visibility and breathability.
• Loaded with premium features for multipurpose applications.
• Fluorescent yellow-green background material for excellent daytime visibility.
• 2" silver reflective tape reflects light for

360º nighttime conspicuity.
Ideal Applications: For use in environments where high visibility and breathability are desired for wearer safety and comfort.

FEATURES & BENEFITS             ICON 3.1
Waterproof, breathable fabric for all season comfort
Insulating Black Fleece liner zips in and out
Removable fleece liner has 2 slash pockets with zippers and adjustable elastic draw cord at the waist.
Stitched and taped sealed seams for 100% waterproof protection
Mesh/taffeta lining for added comfort
Overhead shoulder design for complete freedom of movement
Zipper/storm fly front with throat guard seals out wind and rain
Roll-a-way adjustable hood in collar design for added convenience
Full-vented cape back for improved air circulation
D-ring access for fall protection harness
Hand warmer side pockets with front cargo pockets and velcro closure
Convenient front radio pocket
Inner breast pocket with zipper closure
Elastic cuffs with velcro take-up straps on sleeves
Tapered sweep with adjustable elastic draw cord on jacket for added protection