Developed specifically for the metal building industry, the Super Z-Purlin provides an easy to install anchorage device that includes attachment bolts. The stem height of the anchor is compatible with high rib roofing panels and blanket type insulation. Waterproofing is achieved using a high quality E.P.D.M. gray colored flashing boot and matching stem cover that has an aluminum flange allowing it to be configured easily to any shape panel. The anchor stem features a collapsible design that will arrest a fall and also reduce the shock load to the Z-Purlin by several hundred pounds.
The anchor is engineered to fit all common size Z-Purlins, with custom sizes available upon request. Fabricated using 14 gauge stainless steel, the Super Z-Purlin anchor can be installed onto a purlin before or after erecting and will provide a safe tie-off during the construction period. But the real benefits are realized by workers who have to perform service or maintenance. Few surfaces are as dangerous as a high rib metal roof panel when it is icy or wet, or has an accumulation of algae. A cost effective solution to one of the industries most dangerous hazards. Supplied without caulking or flashing fasteners.

Super Anchor Safety offers two standard size anchors that will attach to the top flange of the most common I-Joists used in construction today. Designed as a substitute for the ARS 2x8 or 2x12 when I-Joists are used for roof framing. They are also compatible with any of our flashing bases. The same anchor can be used to provide temporary anchorage by attaching to I-Joist used for flooring. Perfect for use on low slope I-Joist roof construction. Fabricated out of 14 gauge stainless steel, both anchors attach using the drill through method.

Anchor model # 1006 (ARS 2x8) is specified for use with 1-1/4" top flanges and anchor model # 1003 for 1-3/4" up to 2-3/4" top flanges. For larger dimension top flange or bolt under design, request custom anchors.

Siding and related external wall construction, such as window installation and painting, expose workers to an even greater risk than working on elevated surfaces such as roofs. Fall from scaffolding and especially ladders accounts for more serious injuries than any other job site hazard. Vertical Wall Anchors provide an easy cost effective way to provide protection that can be left in place or removed from service. The low visibility anchor stem comes in two standard configurations allowing a wide range of installation options. Attaches by drilling through the top chord and securing to the wall plate using 4 16d sinkers. The anchor is supplied with all necessary fasteners. Designed to accommodate the bird blocking component on low or steep slopes and fabricated using 1/8" thick stainless steel.

Here is an easy-to-install anchor that can be mounted at the ridge or in the field. The 18 gauge stainless steel 5K is durable enough to be used over and over. Preformed to fit an 8/12 pitch roof, the anchor can also be shaped to any degree, including flat. The 5K feature an attachment hole that allows all standard sized snap hooks and carabiners to be used. Rated for fall arrest.

The 3K is a disposable and cost effective device that can be installed with a hammer and nails when a permanent anchor is not available. Used primarily by service trades like roofing material suppliers. The 3K can also be used to secure a ladder to keep it from falling. Preformed to fit a 5/12 pitch roof, the 16 gauge steel anchor is easily adjusted to any degree. To abandon, simply flatten and roof over. Like the 5K, the attachment hole will accept al standard sized snap hooks and carabiners. Supplied in 12 packs with fasteners.

Nothing works better to fill the fall protection gad than Super Anchor's ARS Moveable Anchor. Ideal for times when you don't have a permanent anchor available, or when performing work with limited duration fall hazards. The ARS Moveable Anchor is made from 11 gauge stainless steel and is powder coated red for high visibility. The attachment device is a high quality aircraft grade 3/8" diameter stainless steel detent locking pin with a T-handle. It is durable enough to stand up to the kind of abuse common in the construction environment. The ARS Moveable Anchor can be used for fall restraint or for fall arrest and is available in two sizes that attach to the five top chord dimensions used in wood framing. Another valuable tool and a "must have" to add to your collection of fall protection equipment.