For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.
We accept VISA and Mastercharge.
| Super Anchor Safety has designed special testing procedures to closely duplicate circumstances that would normally be encountered in the field under normal and adverse conditions. Our products are tested to comply with OSHA, U.S. Dept. of Labor and ANSI Standards, as well as individual state requirements such as California and Washington. All hardware, lanyards and D-Ring components are proof tested to meet such standards, and each product Super Anchor manufactures goes through several visual inspections before it is packaged. Any unused defective product will be replaced at no charge by returning it to our factory or our nearest distributor. |
| Without question, falls represent one of the most serious hazards that workers are exposed to during the construction process. Falls are also one of the most challenging to guard against. Super Anchor Safety provides solutions that are easy to use and cost effective. Fall protection is an important part of job site safety and it starts with the Super Anchor Connection. During construction many trades will be exposed to falls: framers and roofers, HVAC and siding installers, plumbers, masons and gutter hangers, to mention a few. By utilizing Super Anchor anchorage systems and personal fall protection equipment, all of these trades can be protected against the industries' number one hazard: falls from elevated work areas. Super Anchor's ARS series of stainless steel roof anchors are the industry standard in residential construction and are designed as a permanent fixture that provides fall protection during and after the construction process. Attached to the top chord using a single factory supplied bolt, the ARS is available in two sizes that fit all standard wood framing members, 2x4 through 2x12. You can choose from several flashing bases and stem covers to provide a waterproof penetration for all type of roofing materials. For additional applications, Super Anchor Safety offers a wide range of specialty anchorage devices that easily attach to I-joists, Z-purlins and wall top plates. We also offer moveable, re-usable Retro-Fit (for existing structures), disposable anchors, tie-off straps, framing spacers, top plate mounted guard rails, and custom anchors to fit virtually every application found in residential and commercial construction. In addition, Super Anchor also manufactures a complete line of personal fall protection equipment under the "Fall Arrestor" trademark, making Super Anchor Safety a single source for fully engineered component-compatible system. |
 |
 |
| ARS 2x8 is easily installed onto a 2x4 top chord at the truss factory by using a single attachement bolt under the 2x4 blocking.
The Super Anchor is the industry standard for permanent fall protection anchorage devices. Installed at the framing stage, the ARS series features a water proof flashing system that is compatible with all types of roofing membranes common in residential construction.
|
Service and maintenance personnel easily attach to the ARS 2x8 by removing the stem cover. Shown flashed into an asphalt shingle roof with standard Santoprene base.
Because falls account for more job site fatalities and serious injuries than any other hazard, you need a product that provides protection for all trades. The advantage of the ARS series is the ability to provide an anchorage device that is accessible during and after the initial phase of construction. The stainless steel fabricated anchor and durable Santoprene flashing is maintenance free and will last the lifetime of ther roof.
|
 |
 |
| ARS 2x8 installs directly over top chord before sheathing is in place.
To economize on installation and simplify product selection, Super Anchor has designed a single anchor that can be attached to the three most common sizes of top chords used in residential construction. The ARS attaches easily to 2x4, 2x6 or 2x8 and can be used on cathedral ceilings or exposed rafters and standard I-joists. The ARS 2x12 is used when framing with 2x10 or 2x12, and a wide flange version is available for larger size I-joists.
|
ARS 2x8 blends nicely with a slate roof using a lead based flasing. Shown with black stem cover. Gray and Terracotta covers also available.
Reflecting the needs of the industry, Super Anchor Safety provides anchors for almost every application encountered in residential and commercial construction. The low profile design of Super Anchor's permanent anchors, combined with a wide range of flashing choices, produces a finished product that is functional and unobtrusive.
|
 |
 |
| A single retro-fit anchor provides a flashing free anchorage that is accessible from both sides of the ridge. Low visibility can be achieved by painting to match roof color.
Solving the fall protection issues for a finished home is not easy to say the least. The "Retro-Fit" anchor is manufactured to meet this problem head on. To install, just remove a couple pieces of ridge cap, nail the anchor into a rafter and reinstall the ridge cap. Perfect for re-roofing and remodeling multifamily and residential structures.
|
RS-20's unique design allows installation either in the pan or barrel section of high profile concrete roof tiles without using a flashing. May be painted to match tile color.
Efficiency is vital in the building industry. The RS-20 not only has many different applications, it is extremely effective in solving fall protection dilemmas in the home building industry. Originally designed for homes with tile roofs, the RS-20 soon proved itself for wall/siding, floor/decking and all types of roofing applications
|
 |
 |
| Deluxe package system | Value-Pak system |
| Need a complete fall protection package? Super Anchor Safety offers two options to meet your needs. The Total Package Deluxe is the highest quality product and the Value-Pak is a more economical system. Specifically designed for the residential construction worker, this equipment is engineered to be fully compatible with all Anchor Safety's anchorage devices. OSHA requires that the various components used for personal fall protection equipment, including the anchorage device, be engineered to work harmoniously together without creating an unforseen hazard. Our total package approach provides the solution to equipment selection by offering a tested, certified, engineered system that features quality and economy. Our equipment complies with Federal OSHA and ANSI standards including Cal-OSHA and WISHA requirements. |
|
Total Package Deluxe features:
|
Value-Package features:
|
 |
|
| ARS Series Anchors
The industry standard in anchorage devices. The ARS series stainless steel anchor has been providing fall protection for the residential and commercial building industry for over 12 years. Installed at the framing stage, the patented design is flashed into the roofing membrane as a permanent fixture that has the added benefit of providing anchorage for other trades. And it solves the problem of what to do about call backs and maintenance workers. |
|
| Part # | Description | Quantity | Attaches to: | SST Gauge | Flashing | Comments |
| 1001 | ARS 2x8 Combi Pack | Box of 6 | 2x4, 2x6, 2x8 | 14 Ga. | Santoprene/Stem Cover | All components included |
| 1001-B | ARS 2x8 bulk pack | Box of 1008 | 2x4, 2x6, 2x8 | 14 Ga. | Santoprene/Stem Cover | Components bulk packaged |
| 1002 | ARS 2x12 Combi Pack | Box of 4 | 2x10, 2x12 | 14 Ga. | Santoprene/Stem Cover | All components included |
| 1003 | ARS I-Joist | Bag of 1 | 2-1/2" I-Joist | 14 Ga. | User specifies | Choose a flashing kit |
| 1005 | ARS Custom | Box Ea. | Specify size | Specify | User specifies | Choose a flashing kit |
| 1006 | ARS 2x8 | Bag of 1 | 2x4, 2x6, 2x8, 2x10, 2x12 | 14 Ga. | User specifies | Choose a flashing kit |
| 1007 | ARS 2x12 | Bag of 1 | 2x10, 2x12 | 14 Ga. | User specifies | Choose a flashing kit |
| 2801 | ARS 2x8 retail | Bag of 1 | 2x4, 2x6, 2x8 | 14 Ga. | Santoprene/Stem Cover | All components included |
| 2802 | ARS 2x12 retail | Bag of 1 | 2x10, 2x12 | 14 Ga. | Santoprene/Stem Cover | All components included |
| 2805 | ARS 2x8 | Bag of 1 | 2x4, 2x6, 2x8 | 11 Ga. | User specifies | Choose a flashing kit |
| 2806 | ARS 2x12 | Bag of 1 | 2-1/2" I-Joist | 11 Ga. | User specifies | Choose a flashing kit |
| 11 gauge anchors recommended for use when suspension is required. | ||||||
 |
||||||
| High profile concrete and clay roof tiles present a unique challeng to flashing that requires a longer stem length than our ARS 2x8 and 2x12. By adding an extra 1.5" to the stem length, the anchor is easily flashed through the pan or barrel section, leaving the attachment hole accessible. The standard tile roofing flashing features an E.P.D.M. boot that is vulcanized to a malleable .024 gauge, 20" x 20" aluminum base, providing a means to easily conform to the undulations of S-tiles and high profile concrete tiles. A large dimension lead base measuring 12" x 16" is also available as a top flashing. Both types can be used to meet the specifications of the National Tile Roofing Association for pre-flashing or double jack system. We offer three different stem cover colors; terra cotta, light gray and black, to complement most of the popular roof tile colors. And there's more. Drawing on Super Anchor's 25 years of tile and slate roofing experience, the ARS Tile Roof instruction manual includes a special 10 page flashing specification guide illustrating several practical ways to solve high and low profile roof tile penetration problems. |
||||||
| Part # | Description | Quantity | Attaches to | SST Gauge | Flashing | Comments |
| 1020 | ARS Tile Roof Anchor Combi Pack | Box of 6 | 2x4, 2x6, 2x8 | 14 Ga. | Aluminum E.P.D.M. | Does not include stem covers. Order separately |
| 2820 | ARS Tile Roof Anchor Single Pack | Box of 1 | 2x4, 2x6, 2x8 | 14 Ga. | Aluminum E.P.D.M. | Includes Black stem cover |
| 2820T | ARS Tile Roof Anchor Single Pack | Box of 1 | 2x4, 2x6, 2x8 | 14 Ga. | Aluminum E.P.D.M. | Includes Terra Cotta stem cover |
| 2820G | ARS Tile Roof Anchor Single Pack | Box of 1 | 2x4, 2x6, 2x8 | 14 Ga. | Aluminum E.P.D.M. | Includes Light Gray stem cover |
| 1006 | ARS 2x8 Anchor Single Pack | Bag of 1 | 2x4, 2x6, 2x8 | 14 Ga. | Choose flashing | Includes black stem cover |
| 1003 | Lead flashing | 1 | ARS series | N/A | For use on all ARS anchors | |
| WSP home page | Products page | Suppliers page |
| Fall Protection | Super Anchor Index | Next Super Anchor Page |