Large Capacity Gravityflo® Portable Eyewashes
Safety where it's needed is an important element in emergency equipment. Speakman portable models are the dependable answer for this problem, for temporary locations that need protection and for areas where a plumbed source of potable water is not available. SE-4000 Gravityflo eyewash provides flush time in excess of 20 minutes, greatly exceeding the ANSI recommended minimum of 15 minutes and flow rates well in excess of ANSI minimum.

Specifications
Tank: 21 gallon capacity. High density molded polyethylene.
Sprays: Yellow, contoured rubber.
Activator: Quick opening, reliable valve is activated by pulling down the spray arms.
Mounting: Shelf or wall mount (bracket included).
Compliance: ANSI Z358.1
Universal Emergency Sign Included

Available Models
SE-4000 Unit features a 21-gallon tank, brass activating valve and fittings to connect an optional drench hose and includes wall mounting bracket.
SE-4500 Heated gravity fed eye/face wash provides protection in unheated spaces, down to -50ºF. Unit features a 2 I-gallon tank, brass activating valve and includes wall mounting bracket.

Eye Medic™ Cartridge Eyewash
The Eye Medic Emergency Eyewash System is the safest and easiest solution for OSHA compliance needs. The purified flushing fluid eliminates the risk of further contamination of the user's eyes from dirty or stale water. The spray nozzles deliver a soft full stream in excess of the ANSI Z358.1 minimum recommended flows. The compact space saving design offers unlimited installation options. The two-year life of the fluid cartridges, and their easy replacement, reduces maintenance costs.

SE-4700
Eyewash station is 100% gravity-fed and features a high visibility yellow swing down activator and compact design for wall mounting or counter mounting with optional stand.

Specifications
Tank: Low density molded polyethylene. Activator: High visibility yellow swing down tray Mounting: Wall mount (bolts included).
Compliance: ANSI Z358.1
Dimensions: 24.5" x 30" x 14"
Weight: 30 lbs.
Universal Emergency Sign Included

SE-4270
Refill cartridge set features two (2) factory-sealed 4.2 gallon cartridges containing purified flushing fluid with a two-year shelf life.

Specifications
Fluid: Purified water, USP.
Tubing: 3/8" clear PVC; NSF-61 compliant Sprays: ABS plastic; FDA approved
Activation: Pull to activate
Runtime: 15 minutes
Capacity: 4.2 gallons each
Dimensions: 12" x 8" x 13.5"
Weight: 70 lbs.

Available Accessories
SE-47S0 Counter stand.
SE-4240 Fluid collection station. Captures and contains flushing solution. Provided with 3/4" garden hose thread drain connection, coated stainless steel "stay-put" lanyard with wall mounting hardware and lid.

Pressurized Portable Eyewashes
Safety where it's needed is an important element in emergency equipment. Speakman portable models are the dependable answer for those problem, or temporary, locations that need protection now. Speakman's personal wash and 5- and 10-gallon stainless steel pressurized units provide portability for use in mobile or transient applications.

10 Gallon Eyewash Specifications
Tank: 10 gallon capacity, stainless steel tank with pressure gauge, air inlet and pressure relief valve.
Spray Heads: (2) yellow ABS plastic spray outlets with flip-top dust caps.
Activator: Stainless steel push handle.
Performance: .4 gpm for 15 minutes.
Compliance: ANSI Z358.1
Universal Emergency Sign Included

5 Gallon Personal Wash Model SE-597
Specifications
Tank: 5 gallon capacity, stainless steel tank with pressure gauge, air inlet and pressure relief valve.
Drench Hose/Valve: 6' reinforced hose with 3/8" NPTF chrome-plated brass and self-closing squeeze valve.
Universal Emergency Sign Included

Personal Wash Station Model SE-599
Specifications
Tank: 2-112 gallon capacity, stainless steel tank offers 8 times the flushing capacity of conventional squeeze bottles.
Spray Head: Soft flow head with dust cover.
Valve: Self-closing, chrome plated brass.
Pressure Guage: Integral.
Air Valve: Integral.
Universal Emergency Sign Included

Available Models
SE-590 Unit features eyewash and 6' reinforced drench hose with 3/8" NPTF chrome-plated brass and self-closing squeeze valve.
SE-591 Unit features eyewash only.

Options

WHY A TEPID WATER SYSTEM?
ANSI Z358.1 recommends that if a person comes in contact with any hazardous material, the exposed areas should be flushed for at least 15 minutes. Drench showering with very cold water poses a health hazard to employees and a liability problem to employers. Icy waters discourages adequate wash downs, because it is an obvious deterrent to stepping under a shower, much less staying there for 15 minutes. When contaminated clothing is removed for thorough cleaning, the use of cold water contributes to possible shock and hypothermia. From ANSIs standpoint the use of tepid water encourages proper use of drench showers and eyewashes in emergency situations and helps prevent bodily heat loss.

Tepid Water Packages
Speakman Safety Products makes tepid water easy to purchase and install with our tepid water packages. Engineered to provide proper flows, Speakman tepid systems offer cost effective solutions for protecting employees from cold flushing fluids. All necessary components are provided for an effortless installation; simply provide the recommended supply of hot and cold water. Where flushing of the eyes and body is required, the SE-690- TW package offers a combination shower and eye/face wash for total body protection. For applications where an eyewash is the only required protection, the SE-490- TW is the logical choice.

Tepid Water Systems
For facilities with steam available, Speakman safety products offer several solutions for providing tepid water. Our SE-390 is a compact unit that provides a simple tum key system for individual showers or combination units. Simply provide steam and cold water and this unit will deliver from 3 to 30 gpm of 85 F water.
For larger applications the Speakman SE-395 provides up to 60 gallons per minute of 85 degree water, sufficient to operate two (2) combination showers simultaneously. Unit comes complete with a steam instantaneous hot water heater and thermostatic mixing valve.
For facilities where a sufficient hot water source is not available, Speakman safety products offer the SE-380 & SE-385 hot water systems. Both units come complete with a commercial grade electric hot water heater and thermostatic mixing valve. The SE-380 will support a single combination unit and is rated for hazardous area applications. The SE-385 is for non-hazardous locations and will handle up to two continuously operating combination units.

Thermostatic Mixing Valves
Thennostatic mixing valves for safety showers and eyewashes provide a safe and plentiful supply of tempered water when used in conjunction with a potable water source.

Specifications
Temperature Adjustment: Vandal resistant.
Thermometer: Dial thermometer (0 - 200º)F.
Valve Material: Bronze.
Temperature Control: Liquid filled thermostatic motor with stainless steel sliding piston control device, reverse seat closure and both fixed and variable cold water bypass.
Maximum Inlet Pressure: 125 PSI.
Minimum Supply Pressure: 35 PSI.
Recommended Operating Pressure: 65 PSI.
Maximum Inlet Temperature: l80°F.
Recommended Inlet Temperature: 120ºF - 140°F.

• Tn the event of interruption of the cold water supply, the control mechanism closes off the hot water port, stopping all flow.
• Tn the event of interruption of the hot water supply, the control mechanism allows cold flow through both the fixed and variable bypass.
• In the event that the liquid motor fails, the control mechanism closes off the hot water port with the reverse seat and fully opens the internal variable bypass to allow cold water flow.

Available Models
SE-350 Dual element valve with 60 GPM flow capacity supports up to three emergency showers and/or eyewashes. Provides 40 GPM cold water bypass in case of hot water or thennostatic element failure.
SE-352 SE-350 complete with check valves and ball valves.
SE-354 SE-350 complete with cabinet, check and ball valves.
SE-362 25 GPM capacity supports a single shower or multiple eyewash stations and provides a 21 GPM cold water bypass in case of hot water or thermostatic element failure.
SE-360 SE-362 complete with check valves and ball valves.
SE-364 SE-362 complete with cabinet, check and ball valves.
SE-370 7 GPM capacity supports most single eye or eye/face wash stations and provides a 5 GPM cold water bypass in case of hot water or thermostatic element failure. Complete with check valves and outlet thermometer.
SE-374 SE-370 with enamel coated steel cabinet.
SE-390 Steam powered thermostatic mixing valve.
SE-TW-EW Tepid water kit for eyewash, includes SE-370 mixing valve and necessary fittings.
SE-TW-CU Tepid water kit for eyewash, includes SE-360 mixing valve and necessary fittings.
SE-TW SE-370 TMV kit for SEF-1800 & SEF-9000.

Options

Alarms & Signs
The Speakman line of emergency equipment is complemented by a wide assortment of alarms, test equipment, safety valves and high visibility signs to make certain that your safety program and equipment are in optimal condition.

Alarm Systems
AL-l Air alarm system for horizontal showers and combination units. Unit is pull rod activated. Consists of air canister, mounting bracket and hom.
AL-3 Flow switch activated alarm with flashing light and horn. Unit activates when flow to fixture is detected. Equipped wiili a silencing switch to deactivate audible and visual signals while emergency fixture is still in operation. AL-2-C1D2 Flow switch activated alarm wiili flashing light and hom. Unit activates when flow to fixture is detected. Meets Class I Division 2 electrical requirements.
AL-3-C1D2 Flow switch activated alarm wiili flashing light and hom. Unit activates when flow to fixture is detected. Equipped with a silencing switch to deactivate audible and visual signals while emergency fixture is still in operation. Meets Class I Division 2 electrical requirements.
FLW Flow switch to operate remote alarm station. When flow switch senses flow to emergency fixture a switch is closed sending signal to remote station. (Also available as DPDT).

Safety VaIves
FPV Automatic freeze protection for emergency showers and eyewashes. Thermostatic element in valve senses ambient temperature and if this falls below 40°F the valve opens allowing water to flow. The valve will remain open as long as the water temperature is less than 40ºF.
SPV Automatic scald protection for emergency showers and eyewashes. Thermostatic element in valve senses water temperature and if this rises above 95ºF the valve opens allowing water to flow. The valve will remain open as long as the water temperature is greater than 95ºF.

Safety Accessories
SE-Curtain Privacy curtain for attaching to horizontal emergency showers and combination units. Consists of curtain rod, privacy curtain and mounting hardware.
SE-950 Shower and eyewash test kit to support weekly testing of equipment as required by ANSI Z358.1. Consists of 5 gallon catch bucket, shower testing funnel with holding rod and eyewash test gauge.
SE-952 Eyewash test gauge to perform testing as required by ANSI Z358.1.
SE-Stall Fiberglass shower enclosure for showers and combination units.
HFO Foot pedal option for eye and eye/face washes. Allows unit to be activated by either hands or feet.
SE-4210 Anti-microbial preservative for use in portable eyewashes. Treats 5-21 gallons of water for up to 180 days. Carton contains four 80z. bottles.
SGN1 Universal emergency eyewash sign.
SGN2 Universal emergency shower sign.
SGN3 Universal emergency shower and eyewash sign.

• ANSI Z35S.1 requires that companie~ provide Emergency Showers and/or Eyewashes within 10 seconds travel, time of a hazard. Look for signs of hazardous materials and make sure eyewashes and showers are within the prescribed distance.
• ANSI Z35S.l requires that shower valves be of simple operation, turn off to on in one second or less, and provide hands free operation once activated. Self closing shower valves do not meet this standard and should be replaced.
• OSHA Directive Number STD I-S.2. "This directive provides guidelines regarding eyewash and body flushing facilities required for immediate emergency use in electric storage battery charging and maintenance areas." Make sure emergency equipment is properly located near these hazards.
• Personal Eyewash equipment, such as squeeze bottles, do not meet the requirements of plumbed or self-contained eyewash equipment. Make sure units meeting ANSI Z35S.1 are within 10 seconds travel time from hazard.
• The storage, transfer and use of flammable liquids require showers and/or eyewashes as secondary protection. Look for containers used to handle or store these materials and make sure ANSI Z35S.1 compliant Emergency Equipment is within 10 seconds travel distance.
• Look for areas where workers are using Personal Protective Equipment such as goggles and liquid proof gloves. These are found in areas where hazardous materials are being used and eyewashes and/or showers will be required as secondary protection.
• Hand held drench hoses do not meet the criteria of a plumbed or self-contained eyewash. If these are the only means of protection, they should be replaced or supplemented with equipment meeting the requirements of ANSI Z35S.I.