HARD WORKING CLOTHING FOR HARD WORKING PEOPLE.
Salisbury continues to set industry standards with the introduction of the new PRO-OUTERWEAR Arc Flash Protection Garments. These fire resistant garments are a new addition to the PRO-WEAR™ Arc Flash Protection Clothing Line. Constructed of high quality FR fabrics and designed with durability and comfort in mind, this new clothing line offers the same high standards you've come to expect from Salisbury.
Different from the PRO-WEAR Line of Arc Flash Clothing. The PRO-OUTERWEAR Line is designed for colder outdoor use. The garments include a quilted inner lining for comfort and warmth. Specialized gussets and shoulder designs allow for ease of movement and durability. The garment is intended for use by linemen and electrical workers.
Salisbury's PRO-OUTERWEAR Protection Clothing Line includes a hooded jacket, chore coat with removable hood and bib overalls.
Tough, Durable, Dependable. DESIGNED ESPECIALLY FOR LINEMEN.

PRO-OUTERWEAR PROTECTION CLOTHING ATPV Rating of 45cal/cm²
11.5 oz Indura Ultra Soft Shell and 10 oz Moda-Quilt lining
Meets ASTM F1506-02, NFPA-70E, OSHA and latest NESC requirements One year warranty against any manufacturer defects

SIZING INFORMATION

CHEST (inches dia.)

WAIST (inches dia.)

NECK (inches dia.)

ARM (inches length)

INSEAM (inches length)

SMALL

37-39

28-31

14·14-1/2

32-33

31

MEDIUM

40-42

32-35

15-15-1/2

33-34

31

LARGE

43-45

36-39

16-16-1/2

34-35

31

X LARGE

46-48

40-43

17-17-1/2

35-36

31

2X LARGE

49-51

44-46

18-18-1/2

36-37

31

3X LARGE

52-54

47-49

19-19-1/2

37-38

31

JACKET & COAT FEATURES
BI-SWING SHOULDER - Provides easy shoulder mobility.
UNDERARM GUSSET - Provides easy arm mobility when reaching or working above the shoulders and head.
PASS THROUGH FLAP FOR FALL PROTECTION - Allows for a safety harness to be worn underneath the jacket.
RAGLAN SLEEVE - Comfortable fit for any shoulder size.
KNIT WRIST UNDER CUFF - Protects wristlets from snags.
HOOK & PILE CINCHING SLEEVES - Allows rubber insulating gloves and sleeves to be put on and token off easily.
CARGO POCKETS - (Hooded Jacket Only) Large expandable pockets for carrying tools and other items with additional inner pockets to warm hands .
BIB OVERALLS FEATURES
FULL FRONT ZIPPER & FULL LEG ZIPPER - Convenient for dressing while wearing work boots.
EXPANDABLE SIDE PANELS - Creates on expandable fit to improve overall ease of movement and comfort.
HOOK & PILE ADJUSTABLE WAIST - Two easily adjustable side waist adjustment flops.
HOOK & PILE CINCHING LEG CUFFS - Easy use for putting on and taking off work boots.
LONGER CUT BODY - Allows for a safety harness to easily be worn underneath.
LOWER CUT BACK - Allows for the safety harness to be worn under the bib overalls and the 1/01/ ring of the safety harness to be easily attached.
GUSSETED LEG DESIGN - Allows for greater comfort and mobility, especially when kneeling or squatting.

Cat. No.

Description

AC0WHJ4530BRN

FR INSULATED HOODED JACKET - Color Brown

AC0WCC4531 BRN

FR INSULATED CHORE COAT . Color Brown

AC0WB04531 BRN

FR INSULATED BIB OVERAll - Color Brown

AC0W0H45BRN

FR OPTIONAL HOOD - Color Brown One Size

Add suffix: "S" for Small, "M" for Medium, "L" for Large, "X" for

Extra large, "2X" for 2X Large, or "3X" for 3X Large.

SALISBURY PRO·WEAR™ ARC FLASH GLOVES are available in ATPV ratings of 11 to 100 cal/cm²*. These gloves are sewn with Nomex® thread. The 100 cal/cm² rated gloves are made from TuffWeld® (60% Lenzing FRTM . 40% Kevlar®) and Q/9® layered material. The 11 to 55 cal/cm² gloves have a 9 oz./yd² (305 g/m²) SEF (self extinguishing fiber™) modacrylic lining and Indura Ultra Soft® outer shell. The shell make up varies depending on the level of protection:
11 CAL/CM2. single layer of 9 oz./yd² (305 g/m²) Indura Ultra Soft
20 CAL/CM2. single layer of 13 oz./yd² (441 g/m²) Indura Ultra Soft
31 CAL/CM2. 9 oz./yd² (305 g/m²) over 7 oz./yd² (237 g/m²) Indura Ultra Soft
40 CAL/CM2. 13 oz./yd² (441 g/m²) over 5.5 oz./yd² (186 g/m²) Indura Ultra Soft
55 CAL/CM2. 13 oz./yd² (441 g/m²) over 13 oz./yd² (441 g/m²) Indura Ultra Soft
100 CAL/CM2 . 10 oz./yd² (339 g/m²) TuffWeld over 2 layers . 9.4 oz./yd² (319 g/m²) Q/9® batting
All Arc Flash Gloves are 14" long and designed in a clute cut style. One size fits most.

Cat. No.

Description

AFG11

11 cal/cm², navy blue, 9 oz./yd² (305 g/m²) Indura Ultra Soft

AFG20

20 cal/cm², navy blue, 13 oz./yd² (441 g/m²) Indura Ultra Soft

AFG31

31 cal/cm², royal blue, 1 layer of 9 oz./yd² (305 g/m²) and 1 layer of 7 oz./yd² (237 g/m²) Indura Ultra Soft

AFG40

40 cal/cm², gray, 1 layer of 13 oz./yd² (441 g/m²) and 1 layer of 5.5 oz./yd² (186 g/m²) Indura Ultra Soft

AFG55*

55 cal/cm², gray, 2 layers of 13 oz./yd² (441 g/m²) Indura Ultra Soft

AFG100*

100 cal/cm², khaki, 10 oz./yd² (339 g/m²) TuffWeld, 2 layer lining 9.4 oz./yd² (319 g/m²) Q9

SEF Modacrylic is the trademarked name for Solutio's line of modacrylic fibers.

EVERYTHING YOU NEED IN ONE CONVENIENT LlGHTWEIGHT BACKPACK.
The NEW SALISBURY SKBACKPACK is specifically designed to hold virtually everything from tools to full Personal Protective Equipment (PPE) kits. Specialized reinforced compartments with flap closures are located on both sides of the pock and include flexible slots designed specifically to keep your hand tools in place. The individual comportments make finding the right tool a snap. The backpack can even be personalized to hold your very own PPE kit . clothing, head and face protection, insulated tool kit, and much more. The interior includes extra large comportments to hold voltage detectors or other specialized tools, as well as numerous smaller partitions. There is even a specific area for first aid items.
The rugged SK BACKPACK is manufactured from water resistant reinforced fabric, which is resistant to cuts and abrasion. The adjustable heavy duty straps are wide and podded making it very comfortable to wear regardless of the load. The SK BACKPACK includes on exterior hard hat strap, D-ring's, and universal snap hook. Even a built-in integrated handle for those on the move.
Thank you to numerous lineman and electricians that provided feedback and guidance to Salisbury during the design process.

MAKE YOUR SK BACKPACK AN ARC FLASH PROTECTION KIT.
Create the perfect kit:
Salisbury has created the complete Arc Flash Safety Kit including the SK BACKPACK and your choice of coverall or coat/bib combinations - 8 cal/cm², 11 cal/cm², or 40 cal/cm².

KITS WITH SK BACKPACK

SKCABP8 (COVERALL)

SKCABP11 (COVERALL)

SKBP40 (COAT & BIBS)

ATPV (cal/cm²)

8

11

40

HRC

2

2

4

HEAD ARC FLASH PROTECTION

AS1000HAT PRO-SHIELD™ W/ CHIN CUP 10 cal/cm²

AS1000HAT PRO-SHIELD™ W/ CHIN CUP 10 cal/cm²

FH40GY PRO-HOOD™ 40 cal/cm²

BALACLAVA

AFHOOD 10 cal/cm²

AFHOOD 10 cal/cm²

HARD HAT

SA29-03

SA29-03

SA29-03

SAFETY GLASSES

TS56505GRY

TS56505GRY

TS56505GRY

COOLING SYSTEM

ACAIR3000™

ACAIR3000™

ACAIR2000™

TOOL KIT 9 PIECE INSULATED TOOLS

TK9

TK9

TK9

STORAGE BAG

SKBACKPACK

SKBACKPACK

SKBACKPACK

SIZES

S, M, L, XL, 2XL, 3XL

S, M, L, XL, 2XL, 3Xl S, M, L, XL, 2XL, 3XL

Additional kits are available.

Contact your local Salisbury Representative for more information.

Remember to add a Salisbury Glove Kit to complete your Arc Flash Package.

SALISBURY'S NEW HEAVY DUTY TOOL BAG HElPS KEEP ALL YOUR SAFETY NEEDS ORGANIZED AND IN ONE PLACE.
The NEW SALISBURY TOOL BAG is designed to easily transport and organize numerous hand tools and specialized equipment. Finding the right tool becomes effortless because of the many unique compartments. Large reinforced pockets are located throughout the interior of the bag. Outside there are nine individual pouches, including three expandable mesh compartments with "D"-ring clips. Great for carrying anything from water bottles to additional tools.
The SK Tool Bag has a black sleek design and is manufactured from heavy duty water resistant fabric, which is slash and cut resistant. The bag opening is large and reinforced with metal framing. Non-locking hinges allow for easy access and visual searching. The adjustable shoulder strap and durable carrying handle makes toting this lightweight (3.5 pounds) bag from job to job trouble-free.

LARGE STORAGE BAG for storing Salisbury PRO-WEAR™ Arc Flash Clothing, gloves and other accessories. Comes standard in most PRO-WEAR kits. Bag is 24" long x 15" high x 12" deep.

SALISBURY INSULATING RUBBER GLOVES are available in sizes 7 through 12, including half sizes. Proper fit is important to minimize chafing and fatigue. To determine glove size, measure the circumference around the palm. Allow for additional room if fabric glove liners are to be worn, especially with thermal liners.
Class 00 are available in red and block, Type I Natural Rubber or blue and contrasting blue/orange Type II Salcor® ozone resistant rubber. Class 0 gloves are available in red, yellow and block, Type I Natural Rubber or blue Type II Salcor® ozone resistant rubber. The contrast between the thin outer orange color against the inner blue color makes inspecting for cuts and tears easier when the glove is inflated or stretched.
Class 2 glove are available in Type I Natural Rubber only. All insulating rubber gloves are extremely flexible and make working with small parts easy. The gloves meet or exceed ASTM 0120 and IEC EN60903 Standards.

Class

Length

Color

Size (choose one below)

E 00

11 or 14

R, BL, B

7, 8, 8H, 9, 9H

10, 10H, 11, 11H

12

E 0

11 or 14

R, BL, B, Y

E 1

14, 16 or 18

B, YB or RB

E 2

14, 16 or 18

B, YB or RB

INSULATING RUBBER GLOVES MAXIMUM USAGE

LEATHER PROTECTOR GLOVES should always be worn over Insulating Rubber Gloves to provide the needed mechanical protection against cuts, abrasions and punctures. The ILP Series is manufactured from top grain cowhide or goatskin. Cowhide cuffs are tough leather on palm side and orange vinyl on the back, while the goatskin cuffs are green leather on palm side and orange vinyl on back. The ILP10 gloves do not have a cuff. Full complement of styles from low-volt through 16" contour cuff. Comes in dual sizes 7/7.5 through 11/11.5 and 12. Protectors for Class 00 and 0 are available with non-metallic buckle and pull strap or elastic wrist.
It is the responsibility of the purchaser to specify the overall length of the protector gloves. The Clearance Table shows the minimum distance which shall be allowed between the top of the protector glove wff and the top end of the bead of the rubber glove per ASTM F496 Specificotions.
WARNING: Do not use leather protectors alone for protection against electric shock. Serious injury or death will result. Always use proper insulating rubber gloves.
Proper care of leather protectors is essential to user safety. Inspect the leather protectors when inspecting rubber gloves. Metal particles, imbedded wire, abrasive materials or any substance that could physically damage the rubber gloves must be removed from the protector before use.

LEATHER PROTECTORS

Cat. No.

OAL Length in. (mm)

Weight lbs. (kgs)

Cow

Goat

ILP3S

ILPG3S

12 (305)

1 (.5)

ILP5S

ILPG5S

14 (356)

1.2(.5)

ILP7C

ILPG7(

16 (406)

1.5 (.7)

ILP10

ILPG10

10 (254)

.7 (.32)

ILP10A

I LPG10A

10 (254)

.7 (.32)

S=straight cuff, C=contour cuff, A=w/ pull strap.

Sizes: 7/7.5, 8/8.5, 9/9.5, 10/10.5, 11/11.5, 12

LINER GLOVES reduce the discomfort of wearing Insulating Rubber Gloves in all seasans. Far year round use, liners provide warmth in cold weather, while they absorb perspiration in the warm months. Many styles and fabrics ore available with either a open or knit wrist.
The knit wrist style grips the wrist rather than allowing the cuff to roll down and bunch at the palm. All liner Gloves are for year round use with Insulating Rubber Gloves and Mittens. All liners are made from stretch fabric that can fit any hand size.
The L Series has a tough outer cotton fabric while the inner lining is soft and comfartable. The LMKC Series is light, airy and allows ease of movement. The LMKW Series is made from a Rag Wool fabric that moves easily yet gives a substantial layer of lining.

LINER GLOVES

Cat. No.

Description

Wrist Style

Length in. ( mm)

Weight ea. lbs. ( kgs )

L10JK

Jersey Style, light Weight, Seams Out

Knit

10 (254)

.14 (.06)

L12J

Jersey Style, light Weight, Seams Out

Open

12 (305)

.14 (.Ol)

L10MKW

Machine Knit, Cotton/Wool Blend

Knit

10 (254)

.14 (.06)

One size fits all.

GLOVE KITS
Salisbury's insulating rubber gloves are necessary for every electrical worker's complete safety. And to insure your safety, Salisbury's leather protectors provide needed protection from cuts, abrasions, and punctures. To keep these safety items in top condition, proper storage is very important.
Proper storage extends the service life of gloves. Folds and creases strain natural rubber and cause it to cut from ozone prematurely. By storing rubber gloves in the right size bag and never forcing more than one pair into each bag, equipment will lie flat and last longer.

Class

Length (inches)

Color

Size of Gloves (choose one below)

GK 00

11 or 14

R, B, Bl

7,8,9, 10,11,12

GK 0

11 or 14

R, Bl, B, Y

7,8,9, 10,11,12

GK 2

14,16, or 18.

B, RB

7,8,9, 10,11,12

Example:

GK 0

11

BL

9

GLOVE BAGS
Salisbury bags are constructed of heavy duty canvas duck and are double stitched at stress points for extra durability. Canvas bags feature a snap hook for hanging on work belts. Bags feature tapered gussets with wide opening tops for easy insertion.

PRODUCT NUMBERING CHART FOR GLOVE BAGS

Cat. No.

Glove length in. (mm)

Dimensions inches (mm)

Weight lbs. (kgs)

GB112

11(280)

9" X 14" (229 X 356)

1 (.5)

GB114

14 (356)

9" X 16" (229 X 406)

1 (.5)

GB116

16 (406)

9" X 18" (229 X 457)

1.2 (.6)

GB118

18 (457)

9" X 20" (229 X 508)

1.5 (.7)

GLOVE INFLATOR
Electrical insulating gloves must be inspected before each use. Inspection is simplified by using a portable glove inflator such as the Salisbury G99 and the new G100 with adapter for Class 00 and 0 and smaller size gloves. Patent Pending. The G99 is a simple, easy to use, portable glove inflator. The G99 provides a quality means of inspecting gloves in the field. The glove is secured to the inflator using a nylon strap and fastened with hook and pile, or a rubber "0" ring. Inflation is accomplished by pumping the bellows of the inflator.

Cat. No.

Description

Weight lbs. (kgs)

G99

Glove Inflator Kit

2 (.91)

G99B

Replacement Bag

-

G99R

Replacement "0" Ring

-

G99S

Replacement Strap

-

G99V

Replacement Check Valve

-

Gl00

Glove Inflator Kit w/ Adapter

-

Gl00A

Small Lo-Volt Glove Adapter

-

ROLL BLANKETS
Salisbury has gone to great lengths to protect workers from lo-voltage electrical hazards by now offering insulating blanket material on a roll. Salisbury's insulating Roll Blankets, made from a high strength fabric reinforced Type II rubber, allow workers to custom-cut blankets to fit each application at the job site. This minimizes the number of different lo-voltage blanket sizes and shapes that would otherwise need to be carried from job to job.
All classes of Roll Blankets are easy to cut, and flexible to -40 E Highly puncture and tear resistant, each class of blanket is also flame (self-extinguishing), oil, and ozone resistant. Each comes in a convenient 36" wide roll, 30 feet in length in unique colors making it easy to identify and highly visible in the work area.
CLEAR PVC ROLL BLANKETS
Salisbury's Roll Blanket line includes a Class I clear PVC material that permits complete visibility, yet provides the necessary insulating properties meeting ASTM F1742 standards.

ROLL BLANKETS

Cat. No.

Description

Max Use

Dimensions ft. ( m )

RLB00

Class 00 Maroon

500 VAC

3' x 30' (.9 x 9 )

RLB0

Class 0 Yellow

1000 VAC

3' x 30' (.9 x 9 )

RLB1

Class 1 Yellow / Orange

7500 VAC

3' x 30' ( .9 x 9 )

RLBPVC1

Class 1 Clear PVC

7500 VAC

3' x 30' ( .9 x 9 )

CLASS 0 YELLOW LO-VOLTAGE INSULATING BLANKETS
Lo-Voltage Insulating Blankets are made of Type II SALCOR®, ozone resistant rubber and are yellow. Insulating blankets are available with or without hook and pile. These blankets are Class 0 and have a maximum use of 1000 VAC. Covering energized equipment is easier than ever using these blankets. Featuring one-inch wide strips of hook and pile double stitched to the blanket with nylon thread, so installation and removal is safe and fast.

CLASS 0 LO-VOLTAGE INSULATING BLANKETS

Cat. No.

Style

Size in.(mm)

1212YlV

Hook and Pile

12x12 (305x305)

1212YlVNV

Plain

12x12 (305x305)

1818YlV

Hook and Pile

18x18 (457x457)

1818YlVNV

Plain

18x18 (457x457)

1836YlV

Hook and Pile

18x36 (457x914)

1836YlVNV

Plain

18x36 (457x914)

3636YlV

Hook and Pile

36x36 (914x914)

3636YlVNV

Plain

36x36 (914x914)

BLANKET FASTENERS
Blanket Clamp Pins can be effectively used to hold insulating blankets in place. Blanket pins are made of fiberglass reinforced nylon and have molded rubber tips to increase slip resistance.
Magnetic Blanket Buttons are designed for use in eyelets of insulating blankets when covering energized portions in hard-to-cover areas. Four permanent floating magnets are mounted between nickel-plated steel plates. May be applied manually, wearing rubber gloves, or with a shot-gun stick.

BLANKET CLAMP PIN

Cat. No.

Description

length in. (mm)

Jaw Opening in. (mm)

Weight lbs. (kgs)

21

Nylon w/ pin boots

9.5(241)

5 (127)

.25 (.11)

MB6

Magnetic blanket bullon

-

-

7 oz. (.2)

ARC SUPPRESSION BLANKET
The Arc Suppression Blanket is used as a barrier for protection from the explosive and incendiary effects of electrical arcs and flashes. These hazardous electrical discharges can be caused by faults in cables, in cable splices and joints, and at transformer terminals, or they may be generated by the operation of switch gear, circuit breakers and lightning arrestors. The blanket can be used for worker protection in underground vaults, switchyards, and other locations where electrical equipment poses a risk of exposure to explosive electrical discharges. NOT an Electrically Insulating Blanket.
CAUTION
BECAUSE OFTHE UNPREDICTABLY OF ELECTRICAL DISCHARGES, THE ARC SUPPRESSION BLANKET MAY NOT TOTALLY CONTAIN ARCS AND FLASHES, BUT ONLY REDUCE OR LIMIT EXPLOSIVE AND INCENDIARY EFFECTS. IN SUCH CASES, INJURIES MAY STILL OCCUR, EVEN WHEN THE BLANKET IS PROPERLY USED.

ARC SUPPRESSION BLANKET

Cat. No.

Dimensions in.(mm)

Description

ARC45

48 x 60 ( 1219 x 1524 )

w/ Canister

ARC48

48x96( 1219x2438)

w/ Canister

21655

48 x 60 ( 1219 x 1524 )

Blanket Only

21656

48 x 96 ( 1219 x 2438 )

Blanket Only

SWITCHBOARD MATTING
Switchboard Matting is placed permanently in front of switchgear, motor control centers and other high voltage apparatus to provide on additional level of protection for electrical workers. Mode from high quality rubber, 1/4" (6.4mm) thick and tested to 20kV to comply with ASTM D 178, Class 2 specifications. The corrugated surface acts as a safety tread while reducing the possibility of metal particles becoming embedded. Closs 2, switchboard moiling is mode in 25 yard rolls which can be custom cut to specified lengths as per customer request. Class 4 is sold in full rolls only.
Class 2 Maximum Use Voltage: 17,000 VAC
Class 4 Maximum Use Voltage: 36,000 VAC

SWITCHBOARD MATTING

Cat. No.

Dimensions in. (mm)

Weight lbs. (kgs)

M24-2

1/4 x 24 (6x610)

9 (4.11)

M30-2

1/4 x 30 (6x762)

12 (5.4)

M36-2

1/4 x 36 (6 x 914 )

15 (6.8)

M48-2

1/4 x 48 (6x 1219)

18 (8.2)

All switchboard matting comply with current ASTM D 178 standards

* Sold in full rolls only.

ASTM DIELECTRIC FOOTWEAR
Salisbury's dielectric boots are 100% waterproof and made from premium grade ozone resistant rubber. The flexible hand-layered construction includes a durable nylon lining for easy donning and doffing. Salisbury Dielectric Footwear conforms with ASTM F1117 and is tested to ASTM F1116 at 20kV. The sole has a durable construction with a non-skid bar tread outsole. The attached buckle and hardware is nonmetallic. Manufactured in the U.S.A.

DIELECTRIC FOOTWEAR - TESTED TO ASTM F1116 AT 20KV

Cat. No.

Description

Sizes in. ( mm)

21405

17", 1 Buckle, Full Cut Overshoe

Whole Sizes 7 - 17

21406

12", 1 Buckle, Full Cut Overshoe

Whole Sizes 7 - 17

51509

2 Buckle

Whole Sizes 7 - 17

51508

Storm Rubber

Whole Sizes 7 - 17

EXTERNAL ROD CLAMPSTICKS
• Tough Thermoplastic head ferrule.
• EZ Grip plastic hand grip.
• Wide opening 15/16/1 ( 23.8mm)
• Stainless steel hook.
• Heavy rubber end cap.
External Rod Clampsticks are constructed of closed cell foam-filled tubular fiberglass in accordance with ASTM standard F711. The hook operating rod, made of solid 3/8/1 (9.5mm) dia. fiberglass, is mounted on the exterior of the tool so that it can be easily wiped down prior to use.
Add suffix "S" for a 9864 Switch Stick Head or a "U" for a 9840 Splined Universal Head. Clamp sticks may be ordered with these fittings attached to the butt by adding the appropriate suffix to the catalog number.

EXTERNAL ROD CLAMPSTICKS

Cat. No.

Length

Weight Ea.

Feet

Meters

lbs.

kgs

4007

4' 8"

1.32

4.2

1.9

4008

5' 8"

1.62

4.6

2.1

4009

6' 8"

1.93

5.2

2.4

4010

8' 8"

2.54

6.2

2.8

4011

10' 8"

3.15

7.0

3.2

4012

12' 8"

3.76

7.7

3.5

4013

14' 8"

4.37

9.4

4.3

These hot sticks have a standard splined universal head. 1.25" dia. switch sticks are supplied with a #9971 Prong.

UNIVERSAL SWITCH STICKS

Cat. No.

Dimensions: Dia. x Length

Weight Ea.

in x ft.

mm x m

lbs.

kgs

4213

1.25 x 4

31.7 x 1.2

2.6

1.2

4214

1.25 x 6

31.7 x 1.8

3.4

1.5

4215

1.25 x 8

31.7 x 2.4

4.1

1.9

INSULATED RESCUE HOOK
Salisbury's Insulated Rescue Hook is an invaluable tool for any workplace. It's used to withdraw an injured worker out of a hazardous area. Confined spaces, in vaults, or just near electrical cabinets and switch gear are some of the places where this tool is a must. Featuring a foam filled, fiberglass reinforced handle for superior electrical insulation and a coated heat treated body hook with an 18" opening. The stick is available in the standard lengths of 6 and 8 feet. Other lengths are available as a special order. Contact us with your requirements.

INSULATED RESCUE HOOK

Cat. No.

Dimensions ft. (m)

Weight lbs. (kgs)

24401

6' (1.8) length

4.5 (2)

24403

8' (2.4) length

5.5 (2.5)

STATIC DISCHARGE STICK
The Static Discharge Stick is designed to safely remove the static charge after de­energizing. This tool is pre-assembled and includes a brass alloy "U" hook, closed cell foam filled tubular fiberglass switch stick made in accordance with ASTM Standard F711. 6 feet of copper grounding cable attached to a Salisbury 1814 flat jaw grade 3 bronze serrated clamp with strain relief.

STATIC DISCHARGE STICK

Cat. No.

Cable length ft.(m)

Description

Weight lbs. (kgs)

20817

6 (1.8)

Static Discharge Stick 4' (1.2m) length

8 (3.6)

22629

6 (1.8)

Static Discharge Stick w/ Universal Attachment I' (0.3m) length

.38( 0.I7)

TOOL HOLDER
SALCOR® Tool Holders secure tools to trailers, compartments and tool rooms. Great for holding rescue hooks and static discharge sticks. 12 per package.

TOOL HOLDER

Cat. No.

Description

Weight lbs. (kgs)

1192

1.25 ( 32mm) I.D. Tool Holder

3.5 ( 1.6 )

SELF TESTING VOLTAGE DETECTOR KITS
Salisbury's Self-Testing Voltage Detectars allow testing to be continuous and automatic. An intermittent flash and beep confirms the detector is functioning properly.
Self-Testing Voltage Detectors are used to verify live or de-energized conductors. These testers may be used with insulating rubber gloves or hot sticks using the splined universal end fitting. Testers indicate voltage with an extra bright LED light and a distinctive audible signal. It is recommended that the tester be moved closer to the conductor until a warning is indicated, or it touches the conductor, apparatus, or test point. Each tester includes three "C" batteries.
The need for additional PPE can be minimized by confirming that there is no electrical hazard present before work is performed. This can be determined by using a Salisbury Voltage Detector attached to a insulating hot stick of a length long enough to keep the worker outside of the arc flash boundary.
Because the Salisbury Voltage Detector alarms in the proximity of electric fields, it is not necessary to make physical contact with the equipment being checked. Because it is made of non-conductive materials, it will not conduct electricity and not cause an arc flash even if contact with energized equipment is made.

SELF TESTING VOLTAGE DETECTOR KITS

Cat. No.

Settings

4556

1-4544 Tester 240V to 230kV, 1-4315 Case, 1-2500 Shotgun Adapter

4667

1-4644 Tester 240V to 500kV, 1-4315 Case, 1-2500 Shotgun Adapter

4769

1-4744 Tester 240V to 69kV, w/ URD Test Point Selling 15, 25,35kV 1-4315 Case, 1-2500 Shotgun Adapter

BALL & SOCKET SYSTEM
The Ball and Socket Grounding System allows for variable angle accessibility. This system is compact and lightweight. The 21190 Socket Clamp is made from bronze alloy with an integral cable support and strain relief sleeve. This is the ideal grounding system for industrial and substation environments.
Other clamps are available. Please contact your local Salisbury representative for more information.

BALL & SOCKET SYSTEM - SOCKET CLAMPS

Cat. No. & Description

ASTM Grade

Continuous Current Rating (AMPS,RMS,60Hz)

Weight Ea. lbs. (kgs)

21190 w/ Strain Relief Sleeve

5

400

1.2 ( .54 )

21277 w/o Strain Relief Sleeve

5

400

1.1 (.5 )

BALL & SOCKET SYSTEM - BALL STUDS

Cat. No.

Description

Dimensions in. (mm)

Weight Ea. lbs. ( kgs )

21191

Ball Stud Short

4.38 ( 111 )

.53 (.23)

21192

Ball Stud long

6.13 ( 156)

.81(.37)

24082

Internal Thread Ball Stud

4 (102)

.54 (.25)

21228

Offset NEMA Pad Short

5.13 x 1.5 ( 130 x 38 )

.84 (.38)

24087

Offset NEMA Pad long

7 x 1.5 ( 178 x 38 )

1 (.45)

21236

Cover for Ball Stud

-

.09 (.04)

SALISBURY GROUNDING CABLES
Grounding Cables are made with extra flexible strand of soft drawn #30 AWG (.01") copper and are available in three different jackets.
The yellow thermoplastic elastomer jacketed cable is the standard far grounding service. It provides a combination of economy, flexibility, and durability. The service temperature ranges fram 200º to -50ºF. ASTM F 855 Type I.
The black thermoplastic elastomer jacketed cable has a smaller diameter and thinner jacket material giving it better flexibility than the yellow cable. The service temperature ranges from 200º to - 50ºF. ASTM F 855 Type I.
The transparent flexible thermoplastic (PVC) jacketed cable allows easy inspection for strand breakage. The flexibility decreases with low temperatures. The minimum recommended service temperature is 0ºF. ASTM F 855 Type III.

SALISBURY GROUNDING CABLES

Cat.
No.

Size

Jacket in. (mm)

Short Circuit Withstand AMPS, RMS, 60Hz

Continuous Current AMPS,RMS,60Hz

Wt./1000ft. lbs. (kgs)

15 Cycles

30 Cycles

Yellow

2136

#2-665W

.35 (8.9)

.5 ( 12.7 )

14500

10000

200

282 ( 127)

2137

1/0-1064W

.45 ( 11.4 )

.62 ( 15.7 )

21000

15000

250

488 (221 )

2138

2/0-1330W

.49 ( 12.4)

.65 ( 16.5)

27000

20000

300

537 ( 243 )

2139

4/0·2109W

.62 ( 1.7 )

.83 ( 21.1 )

43000

30000

400

836 ( 379 )

Black

2636

#2-665W

.35 ( 8.9 )

.47 ( 12 )

14500

10000

200

263 ( 119 )

2637

1/0-1064W

.45 ( 11.4 )

.58 ( 14.7 )

21000

15000

250

404 ( 183)

2638

2/0-1330W

.49 ( 12.4)

.63 ( 16)

27000

20000

300

497 (22S)

2649

3/0-1672W

.55 ( 14)

.72 ( 18.3)

36000

25000

350

680 (308)

2639

4/0-2109W

.62 ( 1.7 )

.78 ( 19.8)

43000

30000

400

770 ( 349)

Clear

2128

#2-665W

.35 ( 8.9 )

.53 ( 13.5)

14500

10000

200

289 ( 131 )

2129

1/0-1064W

.45 ( 11.4)

.64(16.3)

21000

15000

250

520 ( 235 )

2133

2/0-1330W

.49 (12.4)

.7 ( 17.8 )

27000

20000

300

546 ( 247 )

2288

4/0-2109W

.62 ( 1.7 )

.84 ( 21.3 )

43000

30000

400

841 (381 )

SALISBURY INSULATED PRODUCTS - INSULATED HAND TOOLS
Every insulated hand tool is rated for exposure up to 1000 VAC and dielectrically tested at 10,000 VAC These tools meet or exceed current ASTM FI 505-01 and IEC 900 Standards for Insulated Hand Tools. These tools will help you to be compliant with OSHA 29 CFR 1910 Subpart S, and NFPA 70E 2004.
The insulating material used is impact resistant and flame retardant. Two-color insulation makes inspection easier which adds to the overall safety. If the yellow under layer is showing, the tool may no longer be insulated properly and should be considered for electrical retesting.
Meets IEC 900 Standard for Insulated Hand Tools
Exceed current ASTM F1S0S-0l Standards for Insulated Hand Tools Helps Meet OSHA Requirements
Meets NFPA 70E Requirements
Tested to 10,000 VAC and Rated for 1,000 VAC Maximum Exposure Impact Resistant & Flame Retardant Two-Color Insulating Material Made in U.S.A.

Cat. No.

Description

TK9

Basic Electrician's Roll 9 PCS.INCLUDES: 3/16 X 4", 3/16 X 6",1/4 X 6" SLOTTED SCREWDRIVERS; #1 X 3", #2 X 4" PHILLIPS SCREWDRIVER; 7" NEEDLE NOSE PlIER; 7-1/2" DIAGONAL CUTTING PLIER; 9" LINESMAN'S PLIER; AND COMBINATION STRIPPER / CRIMPER PLIER. IN A ROLL

TK30

Deluxe Maintenance Tool Kit 30 PCS. INCLUDES: 1/8 X 2", 3/16 X 4", 1/4 X 6" SLOTTED SCREWDRIVERS; #1 X 3", #2 X 4" PHILLIPS SCREWDRIVER; TORQUE WRENCH 30 - 150 IN/LB; REVERSIBLE RATCHET 3/8" DRIVE; 3" AND 6" EXTENSIONS 3/8" DRIVE; 8PCS 3/8" TO 13/16" DEEP SOCKET SET 3/8"DRIVE 12 POINT; BOX END WRENCH SET 8PCS 3/8" TO 13/16"; 7·1/2" DIAGONAL CUTTING PLIER; 8" NEEDLE NOSE PLIER; 9" LINESMAN'S PLIER; AND MINI FLASHLIGHT. IN A PLASTIC BOX.

TK30ETK

Electrician's Tool Kit 30 PCS. INCLUDES: 9" LINEMAN PLIER; 8" HD SLIP JOINT PLIER WITH CUTTING SHEAR; CRIMPING TOOL; 10" TONGUE AND GROOVE PLIER (WATER PUMP); SLOTTED SCREWDRIVERS: 3/16" X 4", 1/4" X 4", 1/4" X 6", 5/16" X 6", 3/8" X 8", 3/16" X 6"; PHILLIPS SCREWDRIVERS: #1 X 3", #2 X 4"; NUT DRIVERS: 1/4" X 3", 5/16" X 3", 3/8" X 3", 7/16" X 3", 1/2" X 3", 3/16" X 3", 11/32" X 3"; 8" LONG NEEDLE NOSE PLIER WITH SIDE CUTTER; 7" BOX JOINT CUTTING PLIER; 9·1/2" PLIER CUTTING PLIER; 12" TONG AND GROOVE (WATERPUMP); 6" FLAT NOSE PLIER; LONG ARM, TYPE 'T' HEX WRENCHES: 3/16" 6", 1/4" 6", 5/16" 6", 3/8" 6", 7/16" 6", 1/2" 6" ; IN A PLASTIC BOX

TK60

Hot Box Tool Kit 60 PCS. INCLUDES: 1/8 X 2", 3/16 X 4",3/16 X 6", 1/4 X 6", 5/16 X 6" SLOTTED SCREWDRIVERS; #2 X 4", #2 X 8" PHILLIPS SCREWDRIVER; 3/16, 1/4, 5/16, 11/32, 3/8, 7/16, 1/2 NUTDRIVERS 6" LONG; TORQUE WRENCH 30 . 150 IN/LB; REVERSIBLE RATCHET 3/8"DR, 3" AND 6" EXTENSIONS 3/8"DR, 10 PCS 5/16" TO 7/8" 3/8"DR SOCKET SET; BOX END WRENCH SET 11 PCS 3/8" TO 1"; HEX WRENCH TYPE "L" SET 14PCS 1/16" TO 1/2" 6" LONG ARM; 7·1/2" DIAGONAL CUTTING PLIER, 8" NEEDLE NOSE PLIER, 9" LINESMAN'S PLIER, 9·1/2" CABLE CUTTING PLIER, 10" WATER PUMP PLIER, AND COMBINATION STRIPPER / CRIMPER PLIER. IN A PLASTIC BOX, INCLUDING TOOL ROLLS.

TK60E

Hot Box Tool Kit Without Torque Wrench 59 PCS.INCLUDES: Everything found in TK60 (above) except TORQUE WRENCH 30-150 IN/LB.

WARNING: SALISBURY INSULATED TOOLS ARE TO BE USED AS SECONDARY PROTECTION AND ARE NOT INTENDED TO BE USED IN PLACE OF OTHER PERSONAL PROTECTIVE EQUIPMENT. WHENEVER POSSIBLE, ALWAYS DE-ENERGIZE LINES BEFORE WORKING ON OR AROUND THEM. ALTHOUGH THE INSULATION ON SALISBURY TOOLS IS IMPACT RESISTANT AND FLAME RETARDANT, EACH TOOL SHOULD BE INSPECTED PRIOR TO EACH USE FOR CRACKS, CUTS, OR OTHER DAMAGE. SHOULD THE YELLOW INSULATION BECOME VISIBLE THROUGH THE ORANGE OUTER LAYER, DISCONTINUE USE IMMEDlATELY

All of these kits meet the some standards and are constructed from the some materials as all the Salisbury Insulated Product Insulated Hand Tools found above.
1000V ELECTRICAL INSULATED TOOL KIT FOR HYBRID VEHICLES
Are you ready? Do you have the necessary tools to guard against the dangers of electrocution from hybrid-electric vehicles?
Mechanics and firefighters should be cautious when working on hybrid vehicles because hybrid vehicles use a combination of a gasoline motor and a high-voltage electric motor. The electric motor operates on voltages as high as 500 volts, that's more than eight times the lethal voltage. Be ready for anything. Don't be caught worrying about the "what ifs" while working on these vehicles.
1000V UTILITY INSULATED HAND TOOL KITS
Salisbury makes working in the field even easier with these three New Utility Tool Kits.
Salisbury now offers three specially designed Utility Insulated Hand Tool Kits. These convenient tool kits include everything you need for routine utility applications. Salisbury is proud to offer a 24 piece Substation Tool Kit, a 16 piece Meter Tool Kit, and a 15 piece lineman's Secondary Distribution Tool Kit. Each kit includes easy storage tool rolls and lightweight tool box.

Cat. No.

Description

TK24SS

Substation Kit; 24 Pieces: (5) 3/8" - 3/4" Box Wrenches, (5) 3/8" - 3/4" Ratcheting Box Wrenches, (5) 3/8" . 3/4" Std. Sockets, 3/8" Ratchet with 3" & 6" Extension, #1 x 3", #2 x 6", #3 x 6" Phillips Screwdrivers, Skinning Knife, (2) Tool Rolls and Sturdy Tool Box

TK16MT

Meter Kit; 16 Pieces: 9" lineman's Plier, 7" Diagonal Cutters, 8" Long Nose Pliers, 5/16", 3/8", 1/2" Nut Drivers, #1 x 3", #2 x 4", #3 x 6" Phillips Screwdrivers, 1/8" x 2",1/4" x 6", 3/16" x 4", 3/16" x 6" Slotted Screwdrivers, Fuse Puller, (2) Tool Rolls and Sturdy Tool Box

TK15LM

lineman's Secondary Distribution Tool Kit; 15 Pieces: (9) 7/16" - 15/16" Ratcheting Box Wrenches, Skinning Knife, 3/8" x 12" Slotted Screwdriver, 30" Bolt Cutter, 12" "V" Groove Pliers, 9" Spring Loaded Lineman's Pliers, 10" Adj. Wrench, (2) Tool Rolls and Sturdy Tool Box