2. VIRTUALLY "BULLET-PROOF" ELECTRONICS
Like an armor shield, the M7 HUD, Power Module, and Control Module are encased in a proprietary high-temperature impact-grade polymer, providing the highest possible protection against impact and water ingress. - Electronics enclosures are permanently sonically welded to a hermetic standard and use a high-pressure O-ring to ensure a consistent water-tight seal. The new M7 electronics are virtually "bullet-proof" against fire-ground hazards.

3. STRAIGHT-TALK COMMUNICATIONS
We've got you covered with communications, starting with a high-performance mechanical speech diaphragm, performing so well that it may likely serve as a stand-alone solution to meet the latest NFPA communications requirements! Backing the mechanical diaphragm is an electronic amplifier with an internal facepiece microphone for ultimate clarity, a digital signal processor to eliminate feedback even when shouting, three volume levels, and an auto-off feature after 20 minutes of no-use to save batteries. The new Air Mask speaks loud and clear when it comes to communications.

6. LIGHTWEIGHT AND EASY TO USE
Firefighters already have enough weight to carry and gear to maintain, so MSA engineers set out to lighten the load of components, reduce parts counts, simplify maintenance, maximize user comfort, and modularize the design. The FireHawk M7 Air Mask has a lightweight polymer backplate, with quick-release harness straps, an error-proof cam-lock cylinder attachment, fast change-out electronic components, a large swiveling lumbar pad, and regulators that will fit in the palm of your hand (less than 30 parts for the MMR and 14 for the 1 st stage). Our time-tested Ultra Elite facepiece has unbeatable comfort, visibility, communications, cross-contamination protection, fit, and seal.

Facepiece
MSA offers you the choice of two facepieces, the proven Ultra Elite Facepiece or new industrial Advantage 4000 Facepiece for the AirHawk II Air Mask. Choose from three facepiece sizes (small, medium or large) in either Hycar Rubber or silicone rubber. Nosecups are available in two sizes, standard and large.

The Ultra Elite Facepiece features:

• a one-way check valve preventing exhaled air from entering the mask-mounted regulator
• a molded polycarbonate lens
• a mechanical speaking diaphragm for shortrange communications
• five adjustable rubber straps for exceptional head comfort, security, and safety
• optional heat-resistant Kevlar hairnet-style head harness
  

The Advantage 4000 Facepiece features:

• adapters to convert the Advantage Facepiece to a Twin-Cartridge Respirator (using Advantage Cartridges) or an RD40 Facepiece
• a one-way check valve preventing exhaled air from entering the mask-mounted regulator
• a molded polycarbonate lens
• four-point silicone head harness for exceptional comfort and security
• optional polyester net head harness
  

Airframe Carrier and Harness Assembly
MSA's durable AirFrame Carrier and Harness assembly comes standard with large side handles and a central attachment point to pull workers to safety in rescue scenarios. The AirFrame Carrier and Harness distributes the SCBA's weight over the user's hips for comfort and stability. The composite backplate is made of glass fiber-reinforced thermoset plastic and is economically designed with a spine strain relief. Key components are detachable without special tools.
The assembly's harness components are available in nylon or high-strength Kevlar. Shoulder straps feature easy-to-release friction buckles to positively retain pull straps. A center pull waist belt system is also incorporated into its design. This harness also provides optional shoulder pads, lumbar pad, and chest strap, making this unit the most comfortable
industrial air mask on the market today.
The cylinder band is available in nylon or Kevlar and is secured by an adjustable nylon buckle, allowing the band to retain various cylinder sizes. An optional open-form stainless steel cylinder band provides rapid drop-in cylinder replacement, eliminating webbing adjustments and clips.

Cylinders
MSA offers a choice of three low-pressure (2216 psig) 30-minute-rated cylinders for use with this SCBA. Choose carbon-wrapped, fiberglass hoopwound, or all-aluminum construction cylinders. High-pressure (4500 psig) carbon-wrapped cylinders are available in 30-, 45- or 60-minute durations.

First-Stage Regulator
The PR-14 Regulator is designed with the fewest number of parts in the industry, with Teflon- coated anodized valve bodies to minimize internal component friction and maximize service life.The PR-14 Regulator has only 14 replaceable parts and can be maintained without special tools.

Mask-Mounted Regulator
The second-stage Firehawk Regulator features a slide-to-connect (S-T-C) or push-to-connect (P-T-C) regulator attachment to meet the widest preference ranges. An integrated shut-off prevents cylinder air loss when disconnecting the secondstage regulator from the facepiece. The FireHawk Regulator has only 22 replaceable parts and can be maintained without special tools.

EOSTI
MSA's Audi-Larm™ Audible Alarm is an air-actuated continuously-ringing warning bell that automatically sounds when the air-supply cylinder reaches 25% of its rated service life.

Options

• Optional air-line port, designed to accept an air-line connection from an independent air source
• Optional wireless Heads-Up Display provides the user with the remaining volume of cylinder air through four colored LEDs
• Optional Rapid Intervention Crew (RIC) System enables quick refilling (less than a minute) of an SCBA cylinder from a mobile compressor or cascade system, or you can also transfill between two SCBA wearers
• Optional Emergency Egress Rescue Belt, integral to the SCBA waist belt, features a Kevlar line (50 ft. or 75 ft.) and rappelling hardware
• Optional shoulder-mounted Quick-Fill System EBS accessory offers SCBA cylinder refill from a mobile compressor or cascade system and also allows transfilling between two SCBA wearers
• Optional ICM Tx Integrated PASS/HUD Transmitter features the Personal Alert Safety System (PASS) and the HUD Transmitter combined within a single housing

AirHawk II SCBA
Comes with nylon harness with chest strap, low pressure (2216 psig) An Assemble-To-Order (ATO) PDF is available for download from here

Facepiece

Cylinder

Hard Case

No Case

Ultra Elite, medium Hycar, rubber head harness

Aluminum - 30 minutes

10095800

10095801

Ultra Elite, medium Hycar, Speed-On head harness

L30 Stealth carbon cylinder (30 minutes)

10095802

10095803

Adv 4000, medium Hycar, net head harness

Aluminum - 30 minutes

10095804

Call

Adv4000, medium Hycar, rubber head harness

Aluminum - 30 minutes

Call

10095805

Adv 4000, medium Hycar, net head harness

L30 Stealth carbon cylinder (30 minutes)

10095806

10095807

AirHawk® II Industrial Air Mask (See Table Above for more details on the new model of AirHawk Mask)
Based on the highly successful MSA FireHawk Air Mask which sees duty in the harshest environment -firefighting- MSA's Airhawk MMR Air Mask incorporates the latest technologies available for industrial, agricultural, HazMat and HVAC work.
What sets the Airhawk SCBA apart from the rest of the field is the long list of options that let you customize the apparatus for your specific needs.

• The Advantage 4000 Facepiece that can be configured to air-purifying, supplied-air and SCBA usage via MSA's unique adapter design.
• The Airhawk SCBA is available in low­pressure (2216 psig) or high-pressure (4500 psig) versions
• Three different 30-minute rated low-pressure cylinder types-aluminum, hoop-wound or carbon-fiber-Iet you choose low weight or low-cost
• High-pressure Carbon Fiber-wrapped Composite cylinders are available in 30-, 45- or 60-minute rated durations
• The innovative Firehawk PTC (Push-To­Connect) Regulator easily and securely attaches to your facepiece
• The industry leading Ultra Elite® Facepiece offers the choice of three sizes in either SoftFeel® Hycar rubber or silicone
• Dual-purpose options allow the connection of an air-line. Five different quick-disconnect fittings are available
• The harness assembly is available in Nylon or flame-and-heat-resistant (FHR)Kevlar material. A chest strap, lumbar pad and shoulder pads can also be added, making this the most comfortable industrial Air Mask on the market today

BlackHawk® Tactical Air Mask The BlackHawk Tactical Air Mask is especially designed for tactical situations. Certain BlackHawk features eliminate reflections and/or audible sounds that would compromise concealment-in other words, it is black, sleek and silent. An Assemble-To-Order (ATO) PDF is available for download from here
Ultra Elite® Facepiece

• All-black Ultra Elite facepiece, available in Hycar or silicone rubber
• Three sizes of facepiece with two sizes of black nosecups
• HUD System mounting bracket
• SpeeD-ON® Kevlar Head Harness

Mask-Mounted Regulator

• Firehawk® Regulator with Push-to-Connect feature
• Neoprene intermediate pressure hose
• Variable flow bypass system

EOSTI/Gauge (* There is no audible low pressure warning device on this unit.)

• Nightfighter Heads-Up Display functions silently as the low pressure warning device and the cylinder pressure gauge*
• System consists of a transmitter mounted on the gauge line and a receiver that mounts on the facepiece
• A series of LEOs provides the user with cylinder volume information
• LEOs function in an intermittent mode and can be refreshed by depressing the refresh button on the transmitter
  

Harness and Carrier

• Composite backplate reinforced with glass fibers
• Large side handles on the backplate for pulling the wearer to safety
• Waistbelt, shoulder straps and pull strap are all made of flame and heat-resistant (FHR) Kevlar material
• Optional FHR shoulder pads and lumbar pad (solid or swiveling)
• Optional FHR chest strap
• Adjustable Kevlar cylinder retention strap with over-center latching system
• Cylinder shroud that encompasses the cylinder and Air Mask pneumatics. Shroud is made of Advance FHR material

Cylinders

• The Blackhawk Air Mask is available in both low-pressure (2216 psi) and high-pressure (4500 psi) operating systems
• Carbon- fiber cylinders available for use are: L-30 Stealth, H-30 Stealth, H-45 Low-Profile Stealth, H-60 Stealth Quick-FiII® System Option
• A shoulder-mounted Quick-Fill System option is offered

Workline Accessory

• For extended-use applications, an air-line accessory is available with your choice of five different types of fittings

Rescue Belt

• Emergency egress system integral to the SCBA waist belt
• Includes Kevlar line and rappelling hardware

• A hard case or soft case are offered for storage purposes

CBRN Protection

• Optional CBRN hardened facepiece and regulator assembly
• Positive protection from CBRN agents
• Same CBRN components as the very popular FireHawk Air Mask

Ultra Elite® Facepiece:
The MSA Ultra Elite Facepiece offers an effective combination of comfort and performance. Designed to provide exceptional peripheral and downward vision, the Ultra Elite Facepiece features a super-soft facepiece texture for a smooth and comfortable fit. It also resists chemical attack and temperature extremes, and withstands rugged day-to-day use without tearing and ripping.
The design of the Ultra Elite Facepiece is based on extensive anthropometric studies of the face-length, temple-width and chin-width data from more than 8.000 individuals. The result is a face piece that provides improved seals against a wide range of facial contours. To provide a secure, comfortable fit, the facepiece utilizes five adjustable straps with stainless steel. field-replaceable buckles that resist chemical attack. The straps also feature slightly larger adjustmenttabs that are easier to manipulate, even with gloves on.
For slip-on convenience, the Ultra Elite Facepiece can be equipped with the SpeeD-ON® Facepiece Harness. Made of flame- and heat-resistant Kevlar Fabric, the harness features a hair-net type, five-point suspension that can be easily and securely adjusted at each point.
Lenses on MSA full facepieces are molded from polycarbonate, and a special super hardcoating provides a tough, durable facepiece lens to resist scratching.
Firehawk® MMR:
The Firehawk MMR, MSA's mask-mounted regulator assembly, is available with two different attachment systems, the Firehawk MMR truly redefines ease-of-use and ease-of-maintenance, combined with outstanding performance.
The Firehawk second-stage regulator features a unique Slide-To­Connect (STC) attachment system that allows firefighters to hang the regulator on the facepiece in the "ready position," then simply push it into the facepiece when SCBA air is needed. Doffing of the regulator, while wearing gloves, is also easy with two large release buttons that automatically turn-off the flow of air as the regulator is doffed. A dual­swivel feature on the pressure hose provides maximum freedom-of-head movement and the silicone hose material ensures hose flexibility even at very cold temperatures.
In addition to the STC system, MSA also offers a second connection option for the Firehawk Regulator, the Push-to-Connect (PTC). The PTC's Adapter self-centers the Firehawk regulator and the loud dual sound of the regulator engaging onto the facepiece provides you with confidence that the Firehawk PTC is securely attached to your facepiece-an action that takes just seconds, when seconds count!
Maintenance is also a breeze, considering the Firehawk design requires no tools, adhesives, or sealants, and has approximately 70% fewer parts as compared to other regulators on the market. Additionally, there are no internal adjustments required. Any adjustments to the regulator may be accomplished at a single adjustment point through the outlet port of the regulator.
Ease of use and maintenance, combined with outstanding performance, makes the Firehawk MMR clearly the product of choice.
Heads-Up Display (HUD):
When you open your Air Mask's cylinder valve, the HUD automatically activates, displaying the cylinder pressure reading in 25% increments.
ClearCommand Communications System:
MSA's ClearCommand Communications System is designed specifically to meet the modern communications needs of firefighters. It features an internally mounted microphone coupled with a large-diameter (50mm) amplifier speaker for optimal clarity and volume. Using a proprietary circuit design, the system delivers more than twice the volume of a facepiece alone. Mounted in an "out-of-the-way" position, the ClearCommand System doesn't block vision or mechanical communication. The Ultra Elite's mechanical voicemitter is still fully functional, even with the system installed.

Ultra Elite M7 Facepiece, SpeeD-ON Head Harness, Nosecup and M7 HUD Bracket

Firehawk STC

Firehawk PTC

Standard speaking diaphragm

ClearCommand ready

Standard speaking diaphragm

ClearCommand ready

Small

10084689

10084821

Small

10084690

10084822

Medium

10084823

10084825

Medium

10084824

10084826

Large

10084827

10084829

Large

10084828

10084830

MSA's new FireHawk M7 Responder Air Mask is uniquely versatile protection that can quickly be transformed into a CBRN air-purifying respirator (APR) or a CBRN powered air-purifying respirator (PAPR). You can change respirator modes as your job changes direction from first response and rescue to scene management and remediation activities.
Firefighters typically are the first to respond to any incident whether it is a residential fire, an accident, or any unknown threat. MSA's FireHawk M7 Responder Air Mask provides the maximum level of protection for CBRN environments. However, that amount of protection is not always needed, especially outside the immediate fire scene. Once the hazard has been assessed, air-purifying respirators (APR) may make the most sense for low concentrations of certain contaminants.
The M7 Responder facepiece is NIOSH approved for the SCBA, PAPR and APR configurations, in accordance with the MSA users instructions. This practical emergency respiratory protection system meets/ exceeds the latest requirements of NFPA and NIOSH standards (see ATO ordering information for details). It's the first and only of its kind, and an emergency responder's dream come true.

Based on the seven life-safety design components built on the FireHawk M7 Air Mask to ensure you of the highest-quality SCBA currently available, giving you that lifesaving edge in the face of danger. This new air mask offers more options than any other product in the industry, combined with the unique CBRN APR and PAPR options.
The FireHawk M7 Responder APR
To convert from SCBA to APR, the canister and breathing tube must be attached to the facepiece. When the SCBA cylinder valve is closed, facepiece valves convert to air-purifying mode through the APR canister. Although the air mask carrier and harness and cylinder may be removed from the user, the MMR regulator must always be connected to the inlet adapter to seal the facepiece inlet port.

The FireHawk M7 Responder PAPR
The CBRN Responder PAPR (Powered Air-Purifying Respirator) system is ideal when you need non-IDLH respiratory protection for an extended period of time (up to 8 hours). This PAPR provides an OSHA-assigned protection factor 20 times greater than APR, due to positive pressure in the mask. Essentially, it combines an industry-leading motor-blower to the Ultra Elite M7 Responder Facepiece, and CBRN canisters for up to 8 hours of air-purifying respiratory protection. Its constant filtered airflow (of at least 115 lpm) improves comfort with a cooling effect, greatly reducing pulmonary stress, and preserving strength and mental acuity. The airflow also prevents fogging in the facepiece, reduces claustrophobia,and allows for extended use in hot and stressful environments.

Spare/Replacement M7 HUD

M7 Responder HUD

M7 Responder HUD with bracket

10093911

10093912

APR only

10046570

CBRN Canister

10094016

APR Breathing Tube, 18"

10094023

APR Breathing Tube, 22"

PAPR only

10046570

10094024

Accessories for C420 PAPR

B-20040-001

NiMH Rechargeable Battery Kit (2 NiMH batteries, charger and cap)

M-20020

LiS02 Battery

10094021

6" Breathing Hose Assembly

S-20036

NiMH Rechargeable Battery Pack

B-20090-001

NiMH Rapid Battery Charger

B-30060-001

NiMH Rechargeable Battery Cap Assembly

S-30019

Web Belt Assembly

B-10079-001

PAPR Carrying Case

In a continuation of MSA's pursuit of firefighter safety, the Rescue Belt is being introduced to the fire service. This is an NFPA-compliant emergency egress system that is unique to MSA. The belt can be integrated into the carrier and harness assembly of the MSA Vulcan or Airframe Carrier and Harness assemblies. A 50 foot or 75 foot Kevlar line with a descender and caribiner is weaved into the belt to allow a trapped fire fighter to escape to either the ground or to a floor below the fire.
The belt is available in three lengths, standard (56 inches), mid-size (66 inches) and long (76 inches).

10052766

50' Standard Rescue Belt

10071003

50' Mid-Size Rescue Belt

10052767

50' Long Rescue Belt

10052768

75' Standard Rescue Belt

10071004

75' Mid-Size Rescue Belt

10052769

75' Long Rescue Belt

FireHawk M7 Carrier and Harness Assembly
The one component of any SCBA that has the most impact on firefighter comfort is the carrier and harness assembly. MSA is introducing a new carrier and harness assembly that places an emphasis on firefighter comfort while maintaining the robustness and reliability that is expected in the fire service. The carrier and harness comes standard with large side handles and a central attachment point for pulling firefighters to safety in rescue scenarios. The swiveling lumbar pad provides maximum freedom of movement and comfort when
crawling or climbing.
The assembly utilizes the proven pieces from previous generations of Air Masks such as the tunneled shoulder straps for hose containment, and tri-bar slides for easy removal/installation of the waist belt and shoulder straps. All units are equipped with double-pull waist belts and an optional chest strap is available.

Part No.

Pressure

Chest Strap

Swiveling Lumbar Pad

Low

High

10086663

X

Yes

Yes

10086662

X

Yes

Yes

10086664

X

Yes

10086665

X

Yes

Accessories

10083134

Replacement FireHawk M7 Lumbar Pad

10012167

Chest Strap

Carbon-wrapped Cylinders are the lightest SCBA air cylinders ever developed by MSA. They feature a unique outerwrap made of lightweight, high-performance carbon fibers, which reduces cylinder weight by two to six pounds when compared to fiberglass-wrapped cylinders and as much as ten pounds when compared to aluminum cylinders. They are available in five models to accommodate a wide range of applications.

Part No.

Cylinder Type (Cylinder & Valve)

NIOSH Service Rating Life

Pressure

Weight* (empty)

807586

L-30

30'

2216 psig

7 lb - 9 oz.

816115

L-30+

30'

3000 psig

9 lb -14 oz.

469619

Fiberglass Hoop-Wound

30'

2216 psig

13 lb.

809872

Aluminum

30'

2216 psig

18 lb.

807587

H-30

30'

4500 psig

7 lb-30z.

807570

H-45

45'

4500 psig

10 lb - 9 oz.

10035644

H-45 LP

45'

4500 psig

10 lb-6 oz.

807588

H-60

60'

4500 psig

12 lb-110z.

*AII weights shown are approximate figures.

Accountability is key to every firefighter's safety on a fire scene. MSA's new optional Accountability System revolutionizes fireground safety by combining the latest computer software with a high-performance radio module and the field-proven technology of MSA's ICM Tx Integrated PASS.
A new way to monitor vital information

• Each MSA base station can monitor up to 50 firefighters, and you can use multiple base stations on a single computer.
• The FireHawk M7 Air Mask with telemetry transmits to incident command the firefighter's name, team assignment, cylinder pressure, service­time remaining, PASS alarms (motion or manual), thermal alarms, battery status, radio connectivity, and evacuation acknowledgement.

A fireground management system

• Personalized 10 tags for each firefighter tell incident command exactly who is on scene.
• An integrated PAR (personnel accountability report) timer helps manage radio calls to each team.
• Incident command can manually add firefighters who are not wearing an SCBA or mutual aid firefighters, so all personnel can be accounted for.

Intuitive and easy to use

• Assign firefighters to teams by clicking on a fire­fighter's icon and dragging it to another team.
• A volume of critical information is available at a glance of the screen, due to the large number of firefighters that can be displayed and the pictorial format of the information.
• Receive both audible and visual indications of critical events such as PASS alarms or low­pressure alarms.

• Incident command is assured that firefighters receive all evacuation messages. When incident command transmits the alarm through the FireHawk M7 Air Mask, they'll know the firefighter received it, because the unit automatically sends a confirmation message to the base station.
• By simply pressing a button on his/her own control module, a firefighter can send a manual confirmation to acknowledge that they have received and understand the critically important evacuation message.
• Firefighters will hear the evacuation alarm on their own personal PASS device. Also, visual indications in the HUD and an icon on the control module will alert the firefighter that it is time to evacuate.
• An individual firefighter, a team of firefighters, or all firefighters can be evacuated with the click of a button.
• Although certain concrete and steel commercial structures can challenge any radio signal, MSA's Accountability System coverage with radio technology provides highly reliable performance for a 1-mile line-of-sight range.
• Due to the spread-spectrum design, it does not interfere with other high-band radio frequency equipment.
• For additional safety, both base station and firefighter modules have an icon message to inform users if a firefighter falls out of radio signal range, so that alternate accountability measures, such as voice radio contact with teammates, can be taken.

MSA's new M7 Accountability System revolutionizes fireground safety by combining the latest computer software with a high-performance radio module and the field-proven technology of MSA's ICM TxR Integrated PASS.

10072240

Accountability Base Station Kit (includes software, antenna kit, USB cable and 8-24 volt power cable)

10083876

M7 Control Module Reader / M7 ID tag writer

10083875

M7 ID tags

10075756

Antenna kit

10063880

USB cable

10049410

8-24 volt, power cable

10047342

Wall mount power cable (not included in 10072240 kit)

The patented Quick-Fill System lets MSA Air Mask users refill and transfill air cylinders while the SCBA is worn, without re­moving the air cylinder-even in IDLH atmospheres. Use this MSA-exclusive option to:

• Fill an SCBA cylinder from a mobile compressor or cascade system in less than a minute.
• Transfill between two cylinders, providing an Emergency Breathing System.
• Extend the air supply over longer durations, using a remote compressed-air source.

Because performance is not affected, MSA Air Masks retain NIOSH certification during use of the Quick-Fill System. Air Masks compliant to recent NFPA standard have the Quick-Fill URC fitting located at the Audi-Larm warning device. A Quick-Fill hose with a quick-disconnect connects the air source to the adapter for air transfer.

Replacement Parts for the Quick-Fill System

485366

EBS hose package, includes 3-foot emergency transfill hose in Kevlar pouch

485331

Emergency transfill hose, less Kevlar pouch

485390

Kevlar pouch

485391

Male stainless steel quick-disconnect with SAE-10 thread, complete with dust cover (also for use as a fitting for customized refilling systems)

485392

Female quick-disconnect with SAE-4 thread, complete with dust cover

Quick-Fill Hoses

25-ft lengths are stocked; other "custom lengths" are available on a special material basis. All SAE Fittings are for high-pressure service. Female quick-disconnect fittings have dust covers.

25 ft

12 ft

10 ft

8ft

6ft

3ft

485332

802690

802689

802688

802687

485331

FQD x FQD

487907

802677

802675

802673

802671

492796

FQD x CGA-347 Outlet

487909

802685

802683

802681

802679

487427

FQD x CGA-347 CN

487906

802704

802703

802702

802701

802705

FQD x SAE-4

487908

802678

802676

802674

802672

492797

FQD x CGA-346 Outlet

487910

802686

802684

802682

802680

487428

FQD x CGA-346 CN

The RescueAire II Portable Air Supply System is designed to meet the needs of Rapid Intervention Teams (RITs). The system consists of a lightweight Carbon-Wrapped cylinder, Quick-Fill® emergency breathing system, ExtendAire™ emergency breath­ing system, and an MMR regulator, supported by a flame- and heat-resistant harness. The RescueAire is a complete system that can provide emergency breathing air for most any victim.
The RescueAire II System is available in both low­pressure (2216 psig) and high-pressure (4500 psig) versions. An optional-use shoulder strap is also provided for hands-free carrying.

with L-30 cylinder

less cylinder

Low-Pressure (2216 psig)

10025491

10033312

RescueAire II with L-30 Cylinder

10041196

10041198

RescueAire II, Firehawk STC MMR

10041230

10041232

RescueAire II, Firehawk PTC MMR

with H-60 cylinder

less cylinder

High-Pressure (4500 psig)

10025462

10025492

RescueAire II with H-60 Cylinder

10041195

10041197

RescueAire II, Firehawk STC MMR

10041199

10041231

RescueAire II, Firehawk PTC MMR

The ExtendAire System can be used as both an emergency breathing system and a dual-purpose device for MMR SCBA to allow firefighters to quickly and easily connect to an air-line.

812958

ExtendAire Air-line Hose with foster plug

812973

40" Rescue Hose

10031798

10031797

The Helmet Communication System from MSA is a state-of-the-art radio interface device which significantly improves the user's ability to receive and send messages even in loud ambient-noise environments. It goes wherever you go. The system consists of a helmet-mounted microphone and ear speaker assembly that weighs 5.3 ounces and easily snaps onto the user's fire helmet or industrial-style helmet's ratchet suspension. The helmet mic/ear speaker assembly connects to a lapel microphone or optional stand-alone PD (push-to-talk) unit. The lapel microphone and PD are permanently fitted with a connector for attachment to the specific radio of choice. The Helmet Communication System also offers a plug-in truck communication adapter that can be used by firefighters, along with their helmet microphone assembly, on the way to a fire scene or other incident. Once the firefighter arrives at the scene, the truck system cable is unplugged from the helmet microphone, and the helmet microphone cable end is connected to the user's lapel mic or PD. The user of the Helmet Communication System has uninterrupted communication from the time the alarm sounds until the incident is over.

• Incorporates a "noise-eliminating" bone­conduction voice transmitter that virtually eliminates high ambient noise levels.
• Custom user-fitted ear speaker brings all incoming communication directly to the user's ear. No need to lift your lapel mic up to your ear to hear transmission.
• Easily snaps onto the ratchet suspension of fire helmets or industrial-style helmets. The unit can be easily transferred to other users, and no tools are required for removal.
• Can be used over the top of facepiece head harnesses, hoods and liners without losing the quality of the transmission.
• The bone-conduction microphone is made of soft silicone material, which makes it comfortable to wear, with no pressure points.
• The helmet microphone assembly can be reversed on the helmet suspension to position the ear speaker on either ear.
• The helmet mic system, when used with the lapel mic or PH is powered by the battery from the radio. No need to replace or re-charge dry cells.
• Special connectors suitable for most common radios are available for the lapel microphone and PD, which allows users to adapt the system to their existing radios.
• The helmet mic is NFPA-certified which allows its use while fighting fires.
• Intrinsic safety approvals allow the use of the Helmet Communication System in hazardous environments.
• The stand-alone PD unit is designed for use under hazardous material suits. The large button makes it easy for the user to depress and communicate.
• The helmet mic incorporates a cable keeper which allows for storage of the cable when it's not connected to the lapel mic or PTT

10042902

Helmet Microphone Assembly (includes Custom Fitted Flannel Headband Liner)

Lapel Mic Kits for Radio Interface *

10042908

10042909

Motorola HT600, MT1000, MTX820, MTX900, Radius P200 & P500

10042903

Motorola HT1000, JEDI, MT2000, MTS2000, MTX838, MT839, MTX8000, MTX9000

10042904

10042905

Motorola Radius G P300, Pll 0, SP50, LTS2000, Spirit-III, GTX, SP21

10042912

10042906

10042907

Stand-Alone PTT Kits for Radio Interface *

10045667

10045668

Motorola HT600, MT1000, MTX820, MTX900, Radius P200 & P500

10045662

Motorola HT1000, JEDI, MT2000, MTS2000, MTX838, MT839, MTX8000, MTX9000

10045663

10045664

Motorola Radius G P300, P110, SP50, LTS2000, Spirit-III, GTX, SP21

10045669

10045665

10045666

Truck System

10045732

10045731

Phonejack Adapter, D. Clarke

Parts and Accessories

10046087

10046123

10046122

10046089

10046120

10046121

O-Ring, Single Pin Connector

10045778

*If your specific radio is not listed, please contact MSA Customer Service

ClearCommand® Communications System for Ultra Elite® Facepieces
MSA's ClearCommand Communications System is designed specifically to meet the modern communications needs of firefighters.
Because it's available in two versions, amplifier and amplifier with radio interface, firefighting teams can be properly fitted for the job at hand. Also, the systems are designed for "shared­use" of the amplifier with a unique "bus-bar" arrangement, so individual issue is not required.
The ClearCommand systems feature an internally mounted microphone coupled with a large-diameter (50mm) amplifier speaker for optimal clarity and volume. Using a proprietary circuit design, the system delivers more than twice the volume of a facepiece alone. Mounted in an "out-of-the-way" position, the ClearCommand System doesn't block vision or mechanical communication. The Ultra Elite's mechanical voicemitter is still fully functional, even with the system installed.
The radio interface version features the same amplifier as the amp-only version, combined with an ear-speaker for incoming radio messages and a lapel mic assembly for interface with over 100 radios. The lapel mic can be used as a component of the ClearCommand system or as a stand-alone hand mic.
Both the amplifier and radio interface models are intrinsically safe, and meet the applicable requirements of NIOSH and NFPA 1981, 2002 edition.

ClearCommand System Kits

10024074

Amplifier Kit, complete with microphone

10051290

Amplifier Radio Interface Kit, w/ microphone, less PTT

10023055

Microphone Kit, with mounting bracket

Lapel Mic Kits for Radio Interface*

10042908

Maxon SP120, SP130, SP140

10042909

Motorola HT600, MT1000, MTX820, MTX900, Radius P200 & P500

10042903

Motorola HT1000, JEDI, MT2000, MTS2000, MTX838, MT839, MTX8000, MTX9000

10042904

Motorola Astro and Saber

10042905

Motorola Radius G P300, Pll0, SP50, LTS2000, Spirit-III, GTX, SP21

10042912

Motorola STX, MX800, MX840

10042906

GE Ericsson PCS, PC2005

10042907

GE Ericsson MRK, LPE-200, Prism, PX 126T

Stand-Alone PIT Kits for Radio Interface *

10045667

Maxon SP120, SP130, SP140

10045668

Motorola HT600, MT1000, MTX820, MTX900, Radius P200 & P500

10045662

Motorola HT1000, JEDI, MT2000, MTS2000, MTX838, MT839, MTX8000, MTX9000

10045663

Motorola Astro and Saber

10045664

Motorola Radius GP300, P110, SP50, LTS2000,Spirit-llI, GTX, SP21

10045669

Motorola STX, MX800, MX840

10045665

GE Ericsson PCS, PC2005

10045666

GE Ericsson MRK, LPE-200, Prism, PX 126T

Truck System

10045732

Nexus Adapter, D. Clarke

10045731

Phonejack Adapter, D. Clarke

Parts and Accessories

10046087

Dust Cover

10046123

Guard Ring, Tall

10046122

Guard Ring, Short

10046089

Belt Clip Assy, Standard

10046120

Belt Clip Assy, Clothes Pin Type

10046121

O-Ring, Single Pin Connector

10045778

Flannel Head Band Liner

*If your specific radio is not listed, please contact MSA Customer Service.

APR Adapter
MSA's APR adapter provides firefighters with the versatility they need to perform all tasks at the fire ground with one common facepiece. From fire-fighting to overhaul to homeland security, firefighters can switch from a positive-pressure facepiece to a negative-pressure air-purifying respirator simply by engaging the APR Adapter. The APR Adapter uses MSA's comprehensive family line of air-purifying cartridges; select from the Advantage cartridges or our CBA/RCA canisters to protect against a multitude of airborne contaminants. The APR Adapter is designed for use in non-IDLH environments and is NIOSH-approved.

Spectacle Kit for Full-Facepiece Respirators
For use by workers who must wear corrective lenses, the Spectacle Kit can be easily inserted into the facepiece. The kit includes a wire support, rubber guide, and pair of metal-frame spectacles. There are two kits for the Ultra Elite facepiece; one uses a side wire support to hold the lenses in the facepiece, while the other uses a center support to position the unit. Desired adjustment is obtained by moving the spectacles in and out ofthe rubber guide and up and down the wire support. One size of spectacle frame is used (S-7 shape, 48-mm lens size) with Universal Bridge Corrective Lenses that can be obtained from local sources. The Spectacle Kit can be used with a nosecup.

Provides a convenient means to connect and charge high- pressure air into a high-pressure 4500 psig cylinder. (top image, above)
Accessory for filling low pressure (2216 psig) cylinders (bottom image, above)

APR Adapters

Firehawk MMR STC Version

10032511

APR Adapter

10032927

10032925

Firehawk MMR PTC Version

10040052

10040055

10040054

Accessories

10037809

10037810

817590

CBA/RCA Canisters (box of 6)

809858

Replacement Baffle

813341

Replacement Bayonet Cover

Spectacle Kits

804638

Ultra Elite Spectacle Kit (side wire support)

493581

Ultra Elite Spectacle Kit (center support)

Nosecups

495188

Medium Black Nosecup

495189

Large Black Nosecup

High-Pressure Filling Hose

476105

High-Pressure Filling Hose Assembly

Accessories for Filling Low-Pressure (2216 psig) Cylinders

68846

Air Outlet Connection, complete w/ Gauge

68850

Air Coupler Tee

68851

Air Pigtail

476156

Low-Pressure Air-Filling Hose, 5 feet long