Western Safety Logo

Western Safety Products, Inc. 505 South Lander St., Seattle, WA 98134
Toll Free: (888) 823-0808 Phone: (206) 264-0808 Fax: (206) 264-4921
Website: http://www.westernsafety.com sales@westernsafety.com

Facebook LogoYouTube LogoTwitter LogoLinked-In Logo

Junkin

Junkin pioneered the development of the splint type basket stretcher. This has evolved into the series 300 stretchers. They are made of steel, all welded construction which does not rely on the patient to attain form or rigidity. Available in six models with supplemental accessories to facilitate special needs.

SAF-300
SAF-300 Stretcher This lighweight basket type stretcher
has nylon web straps at chest, abdomen, thigh and calf.
Adjustable footrests for vertical lifting. Frame is 5/8” steel
tubing; cross braces and runners are 3/16” X 3/4” flat steel.
Basket is 18 gauge, 1” hexagon mesh netting.

SAF-300-A
SAF-300-A Same as SAF-300 with the addition of
wood rack through back of trunk section and a strap
adjusted footrest.

SAF-300-B
SAF-300-B Designed to rescue people from locations where
lengthy foot travel is mandatory. The stretcher breaks into two
halves which can be back packed to the point of rescue and
assembled in seconds. Can be secured to standard backpack for
carrying. Three positive lock clamps secure two halves together.
Four 60” web straps are standard. Storage size: 44”x12”x24”.

SAF-300-W
SAF-300-W Stretcher without leg divider. Designed
to accommodate most standard 16” X 72” full length
backboards.

SAF-333-A
SAF-333-A Splint stretcher kit. Model shown is SAF-300-A
strecher. Kit also included two SAF-502 Safety Blankets and
one SAF-300-X stretcher bridle sling.

MIL-8131-W
MIL-8131-W Military basket stretcher is constructed of light
weight stainless steel 3/4” tubing. Built to milspec RR-L-1997
and MIL-L-37957. Available with or without leg divider. Also
available as break apart or plastisol coated.

SAF-200
SAF200 JUNKIN PLASTIC STRETCHER Yellow high-density
polyethylene shell, supported by a stainless steel outer rail, permanently
attached with stainless steel semi-tubular rivets. Features molded runners,
fully exposed outer rail, non-absorbent foam pad secured to stretcher and
four patient restraint straps. Ideal for unusuaily rugged rescue situations
such as industrial, mining or construction.

SAF-200-B
SAF-200B BREAK-AWAY PLASTIC STRETCHER:
The same construction as SAF-200. Designed to rescue
injured persons from locations where lengthy foot travel
is mandatory. 'The stretcher breaks into two haives which
can he back-packed to the point of rescue and assembled
in seconds. Positivelocking quick-release pins secure two
halves together. Four straps are standard.

SAF-300-CS
SAF300CS CONFINED SPACE STRETCIIER: The new 19' width
Confined Space Splint Rescue Stretcher has been designed for rescues
where space is confined. With steel, ail-welded rigid construction, which
does not rely on the injured person to attain form or rigidity. Light in
weight and ample in size. The basket is 18 gauge, 1' hexagon mesh netting.
Nylon web straps for securing at chest, abdomen, thigh and calf. Supplemental
accessories to facilitate special handling needs are available.

SAF-400
SAF400 ALUMINUM BREAK-APART STRETCHER:
Designed to gently maneuver stretcher under patient without
rolling or lifting. The immobilization of the patient in the position
found, minimizes the risk of complicating the existing injuries.
The center of the stretcher can be opened to ailow the patient to be
X-rayed while secured on the stretcher. Features include sturdy,
lightweight aiuminum construction with an adjustable length and
three patient restraint straps. Folds for easy storing and separates
in half during application and removal.

WSP home Products Suppliers First Aid Kits & Supplies Junkin index Next Junkin page