Western Safety Logo

Western Safety Products, Inc. 505 South Lander St., Seattle, WA 98134
Toll Free: (888) 823-0808 • Phone: (206) 264-0808 • Fax: (206) 264-4921
Website: http://www.westernsafety.comsales@westernsafety.com

Facebook Logo YouTube Logo Twitter Logo Linked-In Logo

DBI-SALA Lad-Saf Index


Western Safety Home Manufacturers Fall Protection DBI-SALA General Index
       

 

Loading

Lad-Saf X2

LAD-SAF™X2
Detachable Cable Sleeve
Features and Benefits

EASY TO CLIMB
The Lad-Saf X2 sleeve automatically follows the climber during ascent or descent.
EASY TO INSTALL AND DETACH
One-handed attachment or removal from the cable delivers fast, easy and safe connections. The sleeve can be attached anywhere along the cable for added versatility.
PRIMARY AND SECONDARY LOCKING SYSTEMS
Two independent locking systems, including a mechanical and inertia locking system, in the event of a fall.
INTEGRATED ENERGY ABSORBER/FALL INDICATOR
Deploys in the event of a fall, limits the maximum fall arrest force to 1,350 pounds (6 kN) or less, and shows the device must be taken out of service.
COMPACT AND CORROSION RESISTANT
Compact and lightweight design has stainless steel construction to stand up to harsh environments.

GENERAL SPECIFICATIONS:
• For use with 3/8 inch (9.5 mm) or 5/16 inch (8 mm) diameter 1x7 or 7x19 solid core cable
• Capacity = 1 user of 310 lbs. (140.6 kg)
• Mechanical and inertia locking system
• Size = 5 inches (12.7 cm) x 6 inches (15.24 cm)
• Weight = 2.5 lbs. (1.13 kg)
MATERIALS AND CONSTRUCTION
• Body: Heat Treated Stainless Steel
• Rivets: Stainless Steel
• Locking Cam: Heat Treated Stainless Steel
• Springs: Stainless Steel
• Side Plates and Ext. Pieces: Stainless Steel
      • Construction: Riveted Assembly

LAD-SAF X2
LAD-SAF X2

 

LAD-SAF FLEXIBLE CABLE LADDER SAFETY SYSTEM

LAD-SAF™ FLEXIBLE CABLE LADDER SAFETY SYSTEM
The Lad-Saf™ Flexible Cable Ladder Safety System consists of a top and bottom bracket that act as anchors for a steel cable that runs the length of the climbing area. The Lad-Saf X2 sleeve, attached by carabiner to the harness, arrests falls by locking onto the cable.
Designed for ease of use, economy and versatility, optional brackets/ designs are available for bolting or welding the system. There is a choice of rung clamp sizes/styles and there are systems for straight ladders and for connection to wood, concrete or steel structures.

TENSION INDICATOR
Integrated tension indicating bottom bracket takes the guesswork out of installation.
CUSTOMIZABLE
Hundreds of different brackets, styles and configurations for any application.
CORROSION RESISTANT CONSTRUCTION
Galvanized and stainless steel construction stands up to harsh environments for maintenance free longevity.
SHOCK ABSORBING DESIGN
Integrated shock absorbing top bracket reduces forces imposed on ladder structure during a fall.
INTERMEDIATE CABLE GUIDES
Non-metallic cable guides prevent cable wear against the ladder and permits the climber to bypass without disconnecting.

STANDARD TOP BRACKET
Galvanized top bracket with mounting hardware. For systems up to 499 ft. (152m) high, fits up to 1-1/8” (2.85 cm) rung diameter and attaches to 3 rungs. Includes built-in energy absorber.
6116280
CABLE LIFELINE
Galvanized cable, 3/8” (9.5mm) diameter, 1x7 type. Last 3 digits in part number indicate length.
6110000

CABLE GUIDE
Non-metallic cable guide with mounting hardware. For systems up to 199 ft. (60.6 m), fits up to 1-1/8” (2.85cm) rung diameter. Must have 1 every 25 ft. (7.6 m).
6110400

Cable guide (L-shaped) and hardware for systems over 200 ft. (61 m).
6110515

LAD-SAF X2 DETACHABLE CABLE SLEEVE
Climbing sleeve for easy to climb operation and fall protection.
6160030

STANDARD BOTTOM BRACKET
Fits up to 1-1/8” (2.85cm) rung diameter and attaches to 2 rungs. Galvanized bottom bracket includes built-in tension indicator.
6100090

LAD-SAF FLEXIBLE CABLE LADDER SAFETY SYSTEM
LAD-SAF FLEXIBLE CABLE LADDER SAFETY SYSTEM

 

Cable Ladder System Components

LAD-SAF™
Cable Ladder System Components
Features and Benefits
LAD-SAF™ TOP BRACKET
Standard galvanized top bracket with mounting hardware. For systems up to 499 ft. (152m) high, fits up to 1-1/8” (2.85cm) rung diameter, attaches to 3 rungs, built-in energy absorber.
6116280
LAD-SAF™ BOTTOM BRACKET
Standard galvanized bottom bracket with mounting hardware. Fits up to 1-1/8” (2.85cm) rung diameter, attaches to 2 rungs, built-in tensioning device.
6100400
CORROSION RESISTANT CONSTRUCTION
Galvanized construction stands up to harsh environments for maintenance-free longevity.
SHOCK ABSORBING DESIGN
Integrated shock absorbing top bracket reduces forces imposed on ladder structure during a fall. Bracket distributes load over several rungs of ladder.
EASY TO INSTALL
Standard tools install bracket to ladder. No swaging necessary, system carrier clamp (strandvise) provides easy top bracket cable termination with no tools.
i-SAFE™ EQUIPPED
Includes an i-Safe™ radio frequency identification (RFID) to simplify inspection and inventory control and provide records for your fall protection equipment.
GENERAL SPECIFICATIONS:
• Load Requirements; the top bracket is supplied with three rung connections, the load required for each rung for a single user system is 1,125 lbs. (5.0 kN) per rung (3,375 lbs. {15.0 kN}/3) - see details below:
• Capacity = 1 to 4 user(s) at 310 lbs. (140.6 kg) each.
• Ladder rung strength requirements for;
- One user on system; *3,375 lbs. (15.0 kN)
- Two users on system; *4,350 lbs. (19.3 kN)
- Three users on system; *5,325 lbs. (23.7 kN)
- Four users on system; *6,300 lbs. (28.0 kN) *includes safety factor
• Size = 1-1/2 inch (3.81 cm) x 62 inches (157.48 cm)
• Weight = 23 lbs. (10.43 kg)
MATERIALS AND CONSTRUCTION
• Galvanized 1-1/2” (3.81 cm) square 11 guage hot rolled tube
• Galvanized 2” SCH. 40 pipe
• Galvanized SAE Grade 2, U-bolt
• Elastomeric impact attenuator
• Carrier clamp (cable grip strandvise)
• Stainless steel system label with i-Safe™ RFID tag

Lad-Saf Top Bracket
Lad-Saf Top Bracket
LAD-SAF™ BOTTOM BRACKET
Standard galvanized bottom bracket with mounting hardware. Fits up to 1-1/8” (2.85cm) rung diameter, attaches to 2 rungs, built-in tensioning device.
6100400
CORROSION RESISTANT CONSTRUCTION
Galvanized construction stands up to harsh environments for maintenance free longevity.
INTEGRATED CABLE TENSION SYSTEM
Integrated cable lifeline adjustment system provides a fast, easy and visual indication of a properly tensioned system.
EASY TO INSTALL
Standard tools install bracket to ladder. No swaging necessary, carrier cable tensioner and saddle clips provide easy bottom bracket cable termination.
GENERAL SPECIFICATIONS:
• Simple bolt and clamp plate fasteners install bracket to 2 rungs of ladder
• Bottom bracket should be positioned to allow user(s) safe access when connecting/disconnecting from the system
• Bottom bracket must be mounted in-line (vertically) with the top bracket (6116280)
• Size = 1-1/2 inch (3.81 cm) x 19 inches (48.26 cm)
• Weight = 8 lbs. (3.63 kg)
MATERIALS AND CONSTRUCTION
• Galvanized 1-1/2” (3.81 cm) square 11-guage hot rolled ASTM-A-500 Grade B tube
• Fasteners: U-bolts, nuts and washers are galvanized per ASTM-A-153
Lad-Saf Bottom Bracket
Lad-Saf Bottom Bracket

 

Cable Ladder System Components

LAD-SAF™ CABLE GUIDE
Non-metallic cable guide with mounting hardware. For systems up to 199 ft. (60.6m), fits up to 1-1/8” (2.85cm) rung diameter. Must have 1 every 25 ft. (7.6m).
6100400
INTERMEDIATE CABLE GUIDE
Prevents cable wear against the ladder and permits the climber to bypass without disconnecting.
NON-METALIC DESIGN
Prevents metal-to-metal contact and abrasion, cable rests in guide slot and does not rub on abrasive objects.

EASY TO INSTALL
Standard tools install guides to ladder. Complete with necessary fastening hardware.

GENERAL SPECIFICATIONS:
• Molded polyurethane elastomer guide with steel fastening hardware
• Protects cable from rubbing on abrasive objects
• Slight body pressure releases cable from guide and allows climber to pass by
• One cable guide is positioned approximately every 25 feet of length of system (7.6 m)
• Size = 6.875 inches (17.5 cm) x 1.25” (3.17 cm)
• Weight = 0.70 lbs. (0.32 kg)

MATERIALS AND CONSTRUCTION
• Guide Material: Black Urethane
• Bar Material: Galvanized HR steel

LAD-SAF™ CABLE LIFELINE
1 x 7 Strand
7 x 19 Strand

DURABLE HIGH STRENGTH STEEL CONSTRUCTION
High strength solid core steel construction for maximum durability, longevity and added safety.
1 x 7 or 7 x 19 STRAND TYPE
Options available in galvanized or stainless steel.
CORROSION RESISTANT CONSTRUCTION
Stainless steel construction options stand up to harsh environments for maintenance-free longevity.

Cable Guide
Cable Guide
1X7 Cable Cross Section
1X7 Cable Cross Section
7X19 Cable Cross Section
7X19 Cable Cross Section

 

LAD-SAF Component Specifications

 

9500098

9500099

9500396

9500397

9501591

DIAMETER

3/8”

3/8”

3/8”

3/8”

5/16”

STRAND

7 X 19

7 X 19

1 X 7

1 X 7

7 X 19

STEEL

Galvanized

Stainless

Galvanized

Stainless

Galvanized

PREFORMED

Right Regular Lay

Right Regular Lay

Left Regular Lay

Left Regular Lay

Right Regular Lay

COMPLIANCE

RR-W-410

RR-W-410

ASTM A475

ASTM A368

RR-W-410

LUBRICATION

No

Dry

Dry

Dry

No

BREAKING STRENGTH

14,400 LBS
minimum

12,000 LBS
minimum

15,400 LBS
minimum

18,000 LBS
minimum

9,800 LBS
minimum