Western Safety Logo

Western Safety Products, Inc. 505 South Lander St., Seattle, WA 98134
Toll Free: (888) 823-0808 Phone: (206) 264-0808 Fax: (206) 264-4921
Website: http://www.westernsafety.com sales@westernsafety.com

Hastings Page 7


For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.

Credit Card Images

Boom Mounted Lift Arm
Boom Mounted Lift Arm and Accessories

The boom mounted lift arm can be utilized as a 3Ø or 1Ø lifting attachment when mounted, to derrick trucks and bucket trucks that have lifting capabilities. It can be used for change out of poles, cross arms, insulators and midspan lifting requirements.
The lift arm can be mounted to a square, rectangular, round or oval booms by ordering the proper boom adapters and blocks. The boom mounting assembly features a ratchet which allows the arm to be positioned under load. Total arc covered is 45º.

  • Fiberglass arm and mast assembly is 3" O.D. with solid foam core. They are tested per OSHA and ASTM F-711
  • Fiberglass brace is 1-1/2" O.D. with solid foam core and tested per OSHA and ASTM F-711
  • Metal components are either steel or aluminum alloy
  • Load rating - balanced loading with brace is 1,000 lbs. maximum. Unbalanced loading is 200 lbs. per conductor holder. Rating is based on vertical lift. Sideloading reduces rating.
  • Load rating - If mast only is used with Cat. No. 21642 4-way roller or Cat. No. 12666 4-way roller, it is rated at 500 lbs. maximum
  • Several adapters for mast are available to fit existing jibs on material handling bucket trucks.

Boom Mounted Lift Arm Components and Accessories
Cat. No. 11686
Boom Bracket with Ratchet Assembly
Fits booms 8"x 8" to 11" x 11"
Weight: 38 lbs.
Cat. No. 11683
5' x 3" O.D. Mast Assembly Only
With quick detach pin
Weight: 9.3 lbs.
Arm Assemblies
Cat. No. 13128 - 9' x 3" O.D. Arm with Cat. No. 11974 swivel support, Cat. No. 12006 brace, two Cat. No. 11387 brace clamps and three Cat. No. 5034 four way rollers
Weight: 37 lbs.
Cat. No. 13129 - same as above except arm is 11' x 3" O.D. Weight: 40 lbs.
Cat. No. 21642
Self Aligning Conductor Holder
For attachment to mast. Opening is 1-1/2". Spring loaded latch is hot stick operable. Max. work load 300 lbs. Weight: 4.5 lbs.
Cat. No. 12666
Super Duty Conductor Holder
For attachment to mast and jib adapters accepts 2" dia. conductors. Max. work load 500 lbs.
Weight: 11 lbs.
Cat. No. 5034
Four Way Conductor Holder
For mounting to 3" O.D. arm. Opening is 1-1/2". Spring loaded latch is hot stick operable
Weight: 4 lbs.
Cat. No. 12366
Suspension Insulator String Holder
For attachment to mast. Unit works on both 9" and 10" dia. insulators
Weight: 9.5 lbs.

Boom Mounted Lift Arm Components and Accessories
Boom Mounted Lift Arm Components and Accessories
Cat. No. 12006
57" x 1-1/2" O.D. Brace Pole
For attachment to arm assembly and mast
Weight: 3.2 lbs.
Cat. No. 11387
Brace Clamp
For attachment of brace pole. Fits 3" O.D. arm and mast assemblies. Weight: 3.1 lbs.
Cat. No. 5033
Four Way Conductor Holder
With insulator for mounting to 3" O.D. arm. Spring loaded latch is hot stick operable
Weight: 5 lbs.
Cat. No. A16018
Epoxy Insulator
For attachment to conductor holder. Cat. No. 5034. Use of insulator allows lift arm to be used on 34.5 KV
Cat. No. 13148
Metal Sleeve Adapter
Adapts 3" O.D. mast to 2-1/2" female sockets (Hi Ranger) Clevis pin is included
Weight: 9.2 lbs.
Cat. No. 13495
Brace Clamp
To fit truck jib dia. 3.80 O.D. (McCabe Powers) allows use of Cat. No. 12006 brace pole
Weight: 1.5 lbs.
Cat. No. 13521
Fiberglass sleeve adapter
Adapter O.D. is 2.975" and adapts 3" arm assembly and accessories to truck jib (McCabe Powers) Weight: 3 lbs.
Cat No. 21401
Brace Clamp
To fit truck jib dia.5-1/8" O.D. (Holan) Allows use of Cat. No. 12006 brace pole
 

Material Handling Truck and Boom Mounted Arm Components and Accessories
Lift Arm Components
Cat. No. Description Weight
Square Jib Adapter
For mounting arm assemblies and attachments
3487 Jib adapter for 4" x 4" square FG jibs. Adapter fits Teco and Pitman Units 4 lbs.
3488 Jib adapter for 4" x 4" square FG jibs with metal insert. Adapter fits Holan units 4 lbs.
3498 Jib adapter for Hi Ranger models 5H and 6H units. Adapter mounts to metal clevis on end of jib assembly 4 lbs.
3479 Jib adapter for Altec 4.1" x 4.1" square jibs 4 lbs.
Round Jib Adapter
3497 Jib adapter for Altec jibs. Fits over 3" O.D. jib 4 lbs.
3491 Jib adapter for Tel-E-Lect. Jibs fit into 3-1/4" I.D. jib 4 lbs.
12603 Jib adapter for Holan jibs. Fit into 2-1/2" I.D. jib 4 lbs.
3492 Jib adapter for McCabe Powers. Fits into 3" I.D. jib 4 lbs.
3521 Jib adapter for Asplundh model LB 250. Fits into 2-11/16" I.D. jib 4 lbs.
3522 Jib adapter for Tel-E-Lect model TS-362. Fits into 2-1/4" I.D. jib 4 lbs.
Square Jib Brace Adapter for attaching brace pole to 4" x 4" FG jibs
3489 Square jib brace pole adapter for 4" x 4" jibs. Adapts to Teco, Holan, Pitman, and Hi Ranger material handling units 4.5 lbs.
Round Jib Brace Adapter for attaching brace pole to round FG jibs
13495 Brace clamp for jib diameter 3.80 O.D. McCabe Powers 1.5 lbs.
21401 Brace clamp for jib diameter 5-1/8" O.D. Holan 1.75 lbs.
3493 Brace clamp for jib diameter 4" O.D. Altec 1.4 lbs.
3494 Brace clamp for jib diameter 4.25" O.D. Tel-E-Lect 2.4 lbs.

Boom Mounted Lift Arm Components and Accessories
Conductor LIft Arm

Emergency release lanyard for use with lift arms and single conductor lift heads

  • Allows ground personnel ability to open conductor holders under emergency conditions
  • Easy to install - each lanyard is made with a swivel snap to attach to trip release on conductor holder
  • Safe - each lanyard has an 18" solid fiberglass rod at the top end to isolate the rope from line to ground
  • 1/4" dia. poly rope is attached to ring on bottom end of FG rod. Each rope is 30 ft. long
Cat. No. Item Weight
5043 Set of 3 complete lanyards 3.6 lbs.
5044 1 individual lanyard complete 1.2 lbs.

Super duty self aligning conductor holder

  • For attachment to all jib adapters shown on table above this one
  • Accepts conductors up to 2" dia
  • Latch is hot stick adaptable
  • Max. working load is 500 lbs.
12666   11 lbs.

Boom Adapters - Round Booms
Boom adapters - round booms
  • Adapters can be ordered as separate accessories with the Cat. No. 11686 boom bracket so lift arm can be used on round booms
Cat. No. Description Weight
12211 Adapter set to fit 8" O.D. round boom 18 lbs.
12969 Adapter set to fit 9" O.D. round boom 19 lbs.
12979 Adapter set to fit 10-1/8" O.D. round boom 20 lbs.
6725 Adapter set to fit 12" O.D. round boom 21 lbs.
Note: By attaching or installing any of the above adapter kits, the lift arm assemblies shown in table on top can then be utilized on trucks with round booms

Rubber Glove Auxiliary Arm
Rubber Glove Auxiliary Arm

• The rubber glove auxiliary arm provides a convenient tool for holding up to four conductors while changing out cross arms, insulators, poles, hardware or obtaining work clearances.
• Fiberglass mast and arm are 3" O.D. They have a solid foam core and are tested per OSHA.
• Includes three adjustable conductor holders. Conductor holders will accept conductors and line hose up to 2-5/8 inches. Holders can be used in either up or down position. Safety latch can be hot stick operated.
• Arm can be used on 34.5 KV Ø to Ø voltages if insulator Cat. No. A30008 is used with conductor holders.
• Mounting bases are aluminum alloy and have spring take up chain tighteners.
• Can support 800 Ibs. balanced load or 200 Ibs. per conductor holder.

Cat. No. Description Weight
10810 Complete assembly with 9' arm, 4' mast, 3 conductor holders, mounting bases and brace 36 lbs.
10580 Same as above except with 10' arm assembly 37 lbs.
A10047 Additional wire holder 2.7 lbs.
A30008 Insulator for wire holder 1 lb.

Conductor Gin Pole Mounted
Conducto Gin Pole Mounted

• The Hastings Fiber Glass Conductor Gin is designed for lifting conductors when changing out poles, insulators and hardware on armless type structures.
• Lifting capacity — 600 Ibs. with brace, 450 Ibs. without brace.
• Arm and mast can be rotated in saddle clamps for positioning over load to be lifted.
• Fiber Glass mast and arm is 3" O.D. with a solid foam core and they are tested per OSHA and ASTM F-711.
• Chain tighteners are spring loaded for easy installation and removal of gin.
• Cat. No. 3550 side opening block is provided for positioning fall line parallel to the mast.
• Metal components are made with aluminum alloy and plated steel.

Cat. No. Dimension Reference Max Load Rating Weight
A B C With Brace W/O Brace
3770 31" 25" 84" 600 lbs. 450 lbs. 61 lbs.

Convertible Cross Arm Gin
Convertible Cross Arm Gin

• Convertible — base assembly will accept either the 2-1/2" O.D. x 31" long mast or 3" O.D. x 58" long mast. This feature allows operating personnel maximum lifting heights and safe working load limits.
• Fiberglass masts are tested per OSHA and ASTM F-711.
• Base assembly is constructed with aluminum alloy parts and base plates are reversible to allow gin to be used on 3-1/2 " wide x 4-1/2" high or 4" x 4" wide x 5-3/4" high crossarms.
• Aluminum plate support on base prevents damage to cross arms in load bearing areas.

Cat. No. Description Dimension Working
Load Limit
Weight
A B
5570 Complete gin assembly with Cat. No. 5574 Base and Cat. No. 5572 Mast 21-3/4" 28-1/4" 600 lbs. 17.2 lbs.
5571 Complete gin assembly with Cat. No. 5574 Base and Cat. No. 5573 Mast 48-3/4" 54" 800 lbs. 27 lbs.
5574 Convertible base assembly only -- -- -- 11.8 lbs.
5572 2-1/2" O.D. x 31" long mast only 21-3/4" -- 600 lbs. 5.4 lbs.
5573 3" O.D. x 58" long mast only 48-3/4" -- 800 lbs. 15.2 lbs.

Canvas and Vinyl Storage Bags
Storage Bags

The Hastings Fiberglass Storage Bags are designed for safe storage of rubber goods and lineman's equipment. They are made with top quality materials and designed for rugged use.

• Canvas Storage Bags are made from #6 heavy white cotton duck material with double lock stitching for long wear.
• Vinyl Storage Bags are made with yellow heavy duty nylon reinforced vinyl material.
• Rust resistant hooks and rivets.

Cat. No. Description Weight

RUBBER GLOVE STORAGE BAGS

• All storage bags have Velcro fasteners for easy access and closing.
• All glove bags have a ventilation grommet for air circulation.
• Available in both canvas and vinyl materials.

Canvas Glove Bags
01-050 8" x 15" deep canvas bag for 14" rubber gloves 9 oz.
01-051 8" x 17" deep canvas bag for 16" rubber gloves 10 oz.
01-052 8" x 19" deep canvas bag for 18" rubber gloves 11 oz.
Vinyl Glove Bags
01-054 8" x 15" deep canvas bag for 14" rubber gloves 8 oz.
01-055 8" x 17" deep canvas bag for 16" rubber gloves 9 oz.
01-056 8" x 19" deep canvas bag for 18" rubber gloves 10 oz.

COMBINATION GLOVE & SLEEVE BAG

• All combination bags have velcro fasteners for easy access and closing.
• 8" x 19" Deep with divider for easy storage of sleeves and gloves.
• All units have two ventilation grommets.

Canvas Combination Bag
01-058 8" x 19" canvas bag for sleeves and gloves up to 18" long 1 lb. 2 oz.
Vinyl Combination Bag
01-059 8" x 19" vinyl bag for sleeves and gloves up to 18" long 1 lb.

PADDED PROTECTIVE BAG

• Made with safety yellow heavy duty vinyl.
• Bag has Velcro fastener for easy access and closing.
• Lined with thick protective padding for protecting the following equipment:
• Load buster tools. • Metering Equipment
• Voltmeters •Ammeters

01-061 9"W x 16"L x 5"D vinyl bag with velcro fastener 1 lb. 5 oz.

SLEEVE FORM BAGS

• All sleeve form bags have Velcro fasteners for easy access.
• Eliminates possible damage to sleeves by folding or rolling.
• All bags have dual ventilation.

Canvas Sleeve Bag
01-063 12" tapered to 7" x 27" canvas sleeve bag 10 oz.
01-064 12" tapered to 7" x 29" canvas sleeve bag 12 oz.
Vinyl Sleeve Bag
01-065 12" tapered to 7" x 27" vinyl sleeve bag 9 oz.
01-066 12" tapered to 7" x 29" vinyl sleeve bag 11 oz.

Storage Bags

Storage Bags

Above, top to bottom, left to right
Top Row: Line Hose Bag, Lineman's Tool Bag
Middle Row: Rubber Blanket Roll-Up
Bottom Row: Lineman's Belt Bag (both images)

Cat. No. Description Weight

Rubber Blanket Roll-Up

  • Provides safe and convenient storage for rubber blankets
  • Made with safety yellow vinyl
  • Fiberglass staves provide mechanical protection against punctures
01-070 Roll-up for 24" x 24" rubber blankets 1 lb. 2 oz.
01-071 Roll-up for 36" x 36" rubber blankets 3 lb. 12 oz.
01-072 Roll-up for 46" x 46" rubber blankets 4 lb. 6 oz.

Lineman's Tool Bag

  • Provides storage for climbing tools and personal rubber goods
  • Made with heavy duty cotton canvas
  • Bottom of bag is protected with wooden oak runners
  • Wide opening for easy access
01-077 24" x 7" x 15" tool bag with side pocket 4 lb. 8 oz.

Line Hose Bag

  • Provides temporary storage of rubber line hose
  • PVC ring stitched in top provides easy access
  • Marine plywood stitched in bottom prevents sagging
  • Made with heavy duty reinforced cotton canvas
  • All bags provided with snap swivel
01-073 8" x 31" Hose Bag for 3 ft. long line hose 1 lb. 2 oz.
01-074 8" x 48" Hose Bag for 4.5 ft. long line hose 3 lbs. 12 oz.
01-075 8" x 68" Hose Bag for 6 ft. long line hose 4 lbs. 6 oz.

Lineman's Belt Bag

  • Provides temporary storage for small tools and hardware
  • Made with heavy duty canvas with reinforced double lock stitching
  • Provided with two web loops with rings and snaps
  • Extra large opening for easy access when wearing rubber gloves
01-079 9" x 4" x 9" deep belt bag 8 oz.

Storage Buckets
Canvas Bucket
Cat. No. Description

Weight

Lineman's Tool Bucket

  • Made with heavy duty cotton canvas - double and triple lock stitched
  • PVC ring stitched in top retains opening for easy access
  • Marine plywood stitched in bottom to maintain shape
  • Bags provided with or without safety snap swivels
01-081 12" x 15" deep tool bucket with safety snap swivel 2 lbs. 8 oz.
01-082 12" x 15" deep tool bucket without safety snap swivel 2 lbs. 4 oz.

Lineman's Service Bucket

  • Made with heavy duty cotton canvas - double and triple lock stitched
  • PVC ring stitched in top retains opening for easy access
  • Marine plywood stitched in bottom to maintain shape
  • Designed with four outside and two inside pockets
01-084 10-1/2" x 12" deep service bucket with safety swivel 2 lbs. 10 oz.
01-085 10-1/2" x 12" deep service bucket without safety swivel 2 lbs. 6 oz.

Hastings Mini-Bucket

  • Heavy duty cotton canvas
  • Ideal for truck dashboard, truck console or desk
  • Great for employee awards or promotions
EX1-271 Canvas mini bucket 6" deep x 4.5" diameter 1 lb. 2 oz.

Grounding Equipment
Grounding Equipment

Grounding Equipment for:

  • Distribution lines and systems
  • Transmission lines and systems
  • Substation bus
  • Underground systems
  • Industrial circuits and systems

Features and Benefits

  • Hastings grounding clamps are provided in both aluminum alloy and bronze metals
  • All ground clamps have been electrically tested. Certified test data is available on request
  • All Hastings grounding equipment meets applicable ASTM 855 Standards
  • All grounding components have been thoroughly field tested and time proven

Grounding Equipment

Grounding Equipment

Above, top to bottom, left to right
Top Row: Hanger Studs
Second Row: Typical Grounding Jumper
Third Row, left to right: Stress Relief Methods: A, B, C, D
Bottom Row, left to right: Cable Ferrules: A, B, C, D

Hanger Studs

  • Use of hanger studs makes installation of grounding jumpers safe and easy
  • Hanger studs are ordered as optional equipment with ground clamps. See ordering information with specific ground clamps

Cable Ferrules
All cable ferrules for connecting the grounding cables to the clamps are compression type

A. Compression ferrule shown above "A" insert should be used when terminating cable on pressure type clamps
B. Compression ferrule shown above "B" insert should be used when terminating cable on ground clamps that utilize 5/8" - 11 NC female connection
C. Compression - Bolted type ferrule with heat shrink can also be used when terminating cable on pressure type terminal clamps "C" above
D. Compression - Threaded type ferrule with heat shrink can also be used when terminating cable on clamps with 5/8" - 11 NC female connection "D"

Stress Relief
Stress relief to prevent damage to cable strands is provided by one of the folowing methods on all ground clamps

A. Cable clamps and spacers
B. Clamp straps
C. Eyebolt with integral compression grip
D. Clear heat shrink sleeve

Typical Grounding Jumper
The following information should be known and considered when ordering grounding sets.

  1. O.D. of conductors grounding clamps will be installed on
  2. Available fault current
  3. Ampacity rating of ground cable to be used with ground clamps
  4. Compression ferrules to match ground cable size and type of ground clamp termination
  5. Length of ground cables

Duck Bill Grounding Clamps and Clusters with Pressure Type Bolted Terminals
Duck Bill Ground Clamps
Cat. No. Description Main Line
Range Max.
Main Line
Range Min.
Max. Jumper
Cable
Max. Fault
Current Rating
Min. Installtion
Torque
Weight
1810-2 Single ground clamp
Bronze alloy
336.4 MCM ACSR .75 dia. 6 Solid .16 dia. 2 Str. w/ Ferrule 14,500 Amps, 15 cycles
8,000 Amps, 30cycles
120 Inch lbs. 1.1 lbs.
1810 1810-2 Grd. clamp mounted on a 1-1/4" x 6' fiberglass pole* -- -- -- -- -- 3.1 lbs.
4706-4 Single grd. clamp aluminum alloy 954 MCM ACSR 1.15 dia. 6 Solid .16 dia. 4/0 Str. w/ Ferrule 43.000 Amps, 15 cycles
30,000 Amps, 30 cycles
120 Inch lbs. 1.5 lbs.
4708-4 4706-4 Grd. clamp mounted on a 1-1/4" x 6' fiberglass pole* -- -- -- -- -- 3.5 lbs.
1810-5 3 Wire grd. cluster utilizing Cat. No. 1810-2 grd. clamps 336.4 MCM ACSR .75 dia. 6 Solid .16 dia. 2 Str. w/ Ferrule 14,500 Amps, 15 cycles
8,000 Amps, 30cycles
120 Inch lbs. 5 lbs.
1810-3 Same as Cat. No. 1810-5 w/ 1-1/4" x 6' fiberglass poles* -- -- -- -- -- 11 lbs.
4805-1 3 Wire grd. cluster utilizing Cat. No. 4706-4 Grd. clamps 954 MCM ACSR 1.15 dia. 6 Solid .16 dia. 4/0 Str. w/ Ferrule 27.000 Amps, 15 cycles
20,000 Amps, 30 cycles
120 Inch lbs. 6.8 lbs.
4902-1 Same as Cat. No. 4805-1 w/ 1-1/4" x 6' fiberglass poles* -- -- -- -- -- 12.8 lbs.
13210 Hanger Stud fits above catalog numbers - 4706-4 clamp 0.4 lb.
* Note: Ground clamps can be mounted on other lengths of 1-1/4" dia. fiberglass poles. Please specify when ordering

Duckbill Ground Clamp
Duckbill Ground Clamp

ASTM Designation
Type 1
Class A
Grade 5

  • Duckbill Ground Clamp
  • Snap on design
  • Aluminum body
  • Smooth jaws (non abrasive to bus or conducto)
  • Bronze eye screw w/Acme threads (fast installation - less likely to burr)
  • Stinless steel cable clamp for stress relief
  • Accepts 5/8 - 11 threaded ferrules
  • Meets ASTM 855 Standards
Cat. No. Description Main Line
Range Max.
Main Line
Range Min.
Max Size
Ground Cable
Fault
Current
Weight
10476 Ground clamp duckbill snap-on alum. alloy 900 ACSR 556 MCM (1.16") 6 Solid (.162") 4/0 43KA @ 15 cycles
30KA @ 30 cycles
1.5 lbs.

30 Angle Ground Clamp
30º Angle Ground Clamp

The 30° angle ground clamp from HASTINGS allows linemen and substation mechanics to easily install grounds beyond the normal reach. This new design by HASTINGS incorporates one solid upper body for attaching the grounding cable. With one solid upper body, multiple points of contact, as in all angle clamps, have been eliminated, thus ensuring that the ground clamp will meet and pass all in-service tests. With this new 30° angle clamp, linemen and substation mechanics can hold their shotgun stick to nearly a horizontal position and install this ground clamp.
FEATURES:
• 30° Angle designed into the main body
• C-Head configuration
• Aluminum Body
• Bronze Eye-Screw w/Acme Threads (Fast installation; less likely to burr)
• Stainless Steel cable clamp for stress relief
• Accepts 5/8-11 threaded ferrules
• Meets ASTM 855 standards

ASTM Designation
Type: 1
Class: B
Grade: 5

Cat. No. Description Main Line
Range Max.
Main Line
Range Min.
Max. Size
Ground Cable
Fault
Current
Weight
10385 Ground clamp 30º angle C-Head aluminum alloy 2" di. cable or bus #4 SOL. .18" dia. 4/0 43KA @ 15 cycles
30KA @ 30 cycles
2.14 lbs.

C-Head Ground Clamps with 5/8" - 11 NC Threaded Terminals
C-Head Ground Clamps
  • These clamps utilize Acme-threaded eyestems for fast installation and removal
  • Eyestems are made from bronze alloy material
  • Cat. No.'s 21070, 21552, 21307, 21575 & 10375 have fixed serrations cast into main body
Cat. No. Description Main Line
Range Max.
Main Line
Range Min.
Max. Jumper
Cable
Max. Fault
Current Rating
Min. Install
Torque
Weight
21070 Single ground clamp
bronze alloy
2.88 O.D. cable or bus 6 Solid
.16 dia.
4/0 Str. w/ferrule 43KA @ 15 cycles
30KA @ 30 cycles
275 in. lbs. 3.25 lbs.
21552 Single ground clamp
bronze alloy
500 MCM
.813 dia.
8 Solid
.128 dia.
4/0 Str. w/ferrule 43KA @ 15 cycles
30KA @ 30 cycles
275 in. lbs. 1.4 lbs.
21307 Single ground clamp
bronze alloy
1.033 MCM ACSR 1.25 dia. 6 Solid
.16 dia.
4/0 Str. w/ferrule 43KA @ 15 cycles
30KA @ 30 cycles
275 in. lbs. 2.25 lbs.
21575 Single ground clamp
aluminum alloy
1.033 MCM ACSR 1.25 dia. 6 Solid
.16 dia.
4/0 Str. w/ferrule 43KA @ 15 cycles
30KA @ 30 cycles
275 in. lbs. 1.45 lbs.
10375 Single ground clamp
aluminum alloy
2" dia. Cable or bus 4 Solid
.18 dia.
4/0 Str. w/ferrule 43KA @ 15 cycles
30KA @ 30 cycles
275 in. lbs. 1.8 lbs.
10375-1 10375 ground clamp mounted on a 1-1/4" x 6' fiberglass pole* 2" dia. Cable or bus 4 Solid
.18 dia.
4/0 Str. w/ferrule 43KA @ 15 cycles
30KA @ 30 cycles
275 in. lbs. 3.8 lbs.
13190-1 Hanger Stud fits above Cat. No.'s 21070, 21552, 21307 & 21575 .4 lb.
13210 Hanger Stud fits 10375 ground clamp .4 lb.
* Note: Ground clamps can be mounted on other lengths of 1-1/4" dia. fiberglass poles. Please specify when ordering

C-Head Ground Clamps & Clusters with Pressure Type-Bolted Terminals
C-Head Ground Clamps
  • These clamps utilize Acme-threaded eyestems for fast installation and removal
  • Eyestems are made from bronze alloy material
Cat. No. Description Main Line
Range Max.
Main Line
Range Min.
Max. Jumper
Cable
Max. Fault
Current Rating
Min. Install
Torque
Weight
11190 Single ground clamp
Aluminum alloy
1.0335 MCM ACSR 1.25 dia. 8 Solid
.12 dia.
4/0 Str. w/ferrule 43KA @ 15 cycles
30KA @ 30 cycles
200 in. lbs. 1.3 lbs.
11194 11190 ground clamp mounted on 1-1/4" x 6' fiberglass pole* 1.0335 MCM ACSR 1.25 dia. 8 Solid
.12 dia.
4/0 Str. w/ferrule 43KA @ 15 cycles
30KA @ 30 cycles
200 in. lbs. 3.3 lbs.
3172 Single ground clamp
Aluminum alloy
2" dia. cable or bus 6 Solid
.16 dia.
4/0 Str. w/ferrule 43KA @ 15 cycles
30KA @ 30 cycles
200 in. lbs. 2.4 lbs.
3172-1 3172 ground clamp mounted on 1-1/4" x 6' fiberglass pole* 2" dia. cable or bus 6 Solid
.16 dia.
4/0 Str. w/ferrule 43KA @ 15 cycles
30KA @ 30 cycles
200 in. lbs. 4.4 lbs.
11195 3 wire gound cluster utilizing Cat. No. 11190 ground clamps 1.0335 MCM ACSR 1.25 dia. 8 Solid
.12 dia.
4/0 Str. w/ferrule 43KA @ 15 cycles
30KA @ 30 cycles
200 in. lbs. 5.7 lbs.
11196 11195 mounted on 1-1/4" x 6' fiberglass pole* 1.0335 MCM ACSR 1.25 dia. 8 Solid
.12 dia.
4/0 Str. w/ferrule 43KA @ 15 cycles
30KA @ 30 cycles
200 in. lbs. 11.7 lbs.
9678 3 wire gound cluster utilizing Cat. No. 3172 ground clamps 2" dia. cable or bus 6 Solid
.16 dia.
4/0 Str. w/ferrule 43KA @ 15 cycles
30KA @ 30 cycles
200 in. lbs. 9 lbs.
9679 9678 mounted on 1-1/4" x 6' fiberglass pole* 2" dia. cable or bus 6 Solid
.16 dia.
4/0 Str. w/ferrule 43KA @ 15 cycles
30KA @ 30 cycles
200 in. lbs. 17 lbs.
13210 Hanger Stud fits above Cat. No.s 11190 and 3172 .4 lb.
* Note: Ground clamps can be mounted on other lengths of 1-1/4" dia. fiberglass poles. Please specify when ordering

Tower & Flat Face Ground Clamps
Tower and Flat Face Ground Clamps
Cat. No. Description Max. Jaw
Opening
Max. Jumper
Cable
Max. Fault
Current Rating
Min. Install
Torque
Weight

Tower and Flat Face Ground Clamps with Pressure Type-Bolted Terminals

  • Eyestems are made from bronze alloy
9123 Single Grd. clamp w/Tee handle alum. alloy 1-1/2" 4/0 Str. w/ferrule 30KA @ 30 cycles 200 in. lbs. 1.2 lbs.
9153 Single Grd. clamp w/Eye screw alum. alloy 1-1/2" 4/0 Str. w/ferrule 30KA @ 30 cycles 200 in. lbs. 1.2 lbs.
9123CC Single Grd. clamp w/Tee handle bronze alloy 1-1/2" 4/0 Str. w/ferrule 43KA @ 15 cycles
30KA @ 30 cycles
200 in. lbs. 3.5 lbs.
9153CC Single Grd. clamp w/Eye screw bronze alloy 1-1/2" 4/0 Str. w/ferrule 43KA @ 15 cycles
30KA @ 30 cycles
200 in. lbs. 3.5 lbs.
Tower and Flat Face Ground Clamps with Threaded Terminals 5/8" - 11 NC Threads
21571 Single Grd. clamp w/Eye screw bronze alloy 1-1/2" 4/0 Str. 43KA @ 15 cycles
30KA @ 30 cycles
276 in. lbs. 2.2 lbs.
21608 Single Grd. clamp w/Tee handle bronze alloy 1-1/2" 4/0 Str. 43KA @ 15 cycles
30KA @ 30 cycles
276 in. lbs. 2.4 lbs.

Ground Clamps for Substation Grounding with Pressure Type-Bolted Terminals
Ground Clamps for Substations
Cat. No. Description Main Line
Range Max.
Main Line
Range Min.
Max. Jumper
Cable
Max. Fault
Current Rating
Min. Install
Torque
Weight
9071 Single ground clamp
aluminum alloy
3" dia. bus or cable 6 Str.
.18 dia.
4/0 Str. w/ferrule 54KA @ 15 cycles
39KA @ 30 cycles
200 in. lbs. 4.2 lbs.
9076 9071 mounted on 1-1/4" x 6'
fiberglass pole*
3" dia. bus or cable 6 Str.
.18 dia.
4/0 Str. w/ferrule 54KA @ 15 cycles
39KA @ 30 cycles
200 in. lbs. 6.2 lbs.
4367-2 Single ground clamp
aluminum alloy
4" x 1/2" flat bus or 2.875 dia. bus 6 Solid
.16 dia.
1/0 Str. w/ferrule 21KA @ 15 cycles
15KA @ 30 cycles
120 in. lbs. 2.4 lbs.
4367-4 4367-2 mounted on 1-1/4" x 6'
fiberglass pole*
4" x 1/2" flat bus or 2.875 dia. bus 6 Solid
.16 dia.
1/0 Str. w/ferrule 21KA @ 15 cycles
15KA @ 30 cycles
120 in. lbs. 4.4 lbs.
4367-1 Single ground clamp
aluminum alloy
3" x 3" square bus 6 Solid
.16 dia.
1/0 Str. w/ferrule 21KA @ 15 cycles
15KA @ 30 cycles
120 in. lbs. 2.4 lbs.
12282 Single ground clamp
aluminum alloy
6.625 dia. bus 1/0 Str.
.398 dia.
4/0 Str. w/ferrule 54KA @ 15 cycles
39KA @ 30 cycles
200 in. lbs. 5.5 lbs.
3172 Single ground clamp
aluminum alloy
2" dia. cable or bus 6 Solid
.16 dia.
4/0 Str. w/ferrule 43KA @ 15 cycles
30KA @ 30 cycles
200 in. lbs. 2.4 lbs.
3172-1 3172 mounted on 1-1/4" x 6'
fiberglass pole*
2" dia. cable or bus 6 Solid
.16 dia.
4/0 Str. w/ferrule 43KA @ 15 cycles
30KA @ 30 cycles
200 in. lbs. 4.4 lbs.
* Note: Ground clamps can be mounted on other lengths of 1-1/4" dia. fiberglass poles. Please specify when ordering

Substation Grounding Clamps with Hanger Studs
Substation Grounding Clamps with Hanger Studs
Above, left to right:
21057, 21056, usage example, 21546-1
  • These grounding clamps enable substation maintenance crews to utilize their portable grounds on large bus by providing a fault cuurent rated hanger stud as part of the clamp
  • Use of these hanger stud clamps could save cost of special ground assemblies made up for each substation
  • Three models available. Each clamp has a wide range of bus/conductor sizes

Cat. No. 21057
Weight: 8.7 lbs.

The 21057 clamp body is aluminum. The eye screw is bronze with acme threads for easy installation. Min. range .398 dia. Max range 6.625 dia. Hanger Stud is 5/8" dia. solid copper alloy. Rating is 54,000 amps for 15 cycles and 39,000 amps for 30 cycles.

Cat. No. 21056
Weight: 4.5 lbs.

The 21056 clamp body is one piece and is cast from bronze alloy for maximum strength. Eye screw is bronze with acme threads for easy application. Min. range 1-1/4" O.D. Max. range 5" O.D. Clamp rating 54,000 amps for 15 cycles and 39,000 amps for 30 cycles. Stud size is 13/16" O.D.

Cat. No. 21546-1
Weight: 4.4 lbs.

The 21546-1 clamp body is one piece and is cast from bronze alloy for maximum strength. Eye screw is bronze with acme threads for easy application. Fits square / rectangular bus. Max size is 3-5/8" x 2-1/4". Clamp rating 43,000 for 15 cycles. Stud dia. 3/4".

Grounding Cluster Bars and Suports

Grounding Cluster Bars and Supports

Above
Top left: Cat. No. 6767
Bottom left: Cat. No. 6724-1
Top right: usage example
Bottom right: Cat. No. 6754

  • Provides protection for operating personnel during grounding procedures and practices
  • All ground clusters and supports utilize an adjustable chain tightener with 36" of chain
  • Four models available to meet individual grounding practices and needs

Cat. No. 6767
Weight: 6.8 lbs.

Compact aluminum alloy cluster bar is 5/8" dia. Bar accepts both "C" type and duckbill type ground clamps, excellent choice for single point grounding practices. Tested for 43,000 amps, 15 cycles

Cat. No. 6724-1
Weight: .75 lb.

Aluminum alloy 4-way cable splice

  • Can be used for connecting ground cables together
  • Four terminal positions
  • Terminals are tapped for use with 5/8-11 NC threaded grounding ferrules
  • Splice has cable "pads" for stress relief of ground cables
  • Tested at 43,000 amps, 15 cycles

Cat. No. 6754
Weight: 8 lbs.

Aluminum base with a 5/8" dia. solid copper alloy bar. Bar accepts both "C" type and duckbill type ground clamps. Excellent choice for single point grounding. Copperbar will hold up to four clamps. Tested for 43,000 amps at 15 cycles

Substation Grounding Sets & Ground Lifting Tool
Substation Grounding Sets & Ground Lifting Tool

• The below listed tools enable operating personnel the capability of grounding de-energized substations safely and easily with use of the Ground Lifting Tool.
•Two ranges of ground clamps allow application on bus/conductors from #6 str. (.18 dia.) minimum up to and including 6.625" dia. bus. maximum.
• Ground clamps are mounted on an 8' length of 1-1/4" dia. fiber glass pole. The bottom end of the clamp mounted pole has a fiberglass male splice to allow extension sections to be added to the top section to meet the required height for applying the ground set.
• The Ground Lifting Tool has a universal end and is supplied with a large opening "C" hook that is coated for protection. It comes complete with handline block, adjustable block clamp and 50 ft. of 1/2" polypropylene rope. The hook and block clamp are mounted on an 8' length of 1-1/4" dia. fiberglass pole with male splice on the bottom end to allow additional lengths of extensions to be added as required.
• All fiberglass poles have a foam core and are tested to ASTM F-711.

Cat. No. Description Main Line
Range Max.
Main Line
Range Min.
Max. Jumper
Cable
Max. Fault
Current Rating
Min. Install
Torque
Weight
13761 Ground clamp mounted on a 1-1/4" x 8' FG pole with male splice on bottom end* 3" dia. bus or cable 6 Str.
.18 dia.
4/0 Str. w ferrule 54KA @ 15 cycles
39KA @ 30 cycles
200 in. lb. 7.2 lbs.
13762 Ground clamp mounted on a 1-1/4" x 8' FG pole with male splice on bottom end* 6.625 dia. bus 1/0 Str.
.398 dia.
4/0 Str. w ferrule 54KA @ 15 cycles
39KA @ 30 cycles
200 in. lb. 8.5 lbs.
* Ground clamps have bolted type pressure terminals
13763 Ground lifting tool complete with "C" hook, handline block and clamp, 50 ft. 1/2" polypropylene rope installed on a 1-1/4" x 8' fiberglass pole with male splice on bottom end
546-6 1-1/4" x 6' fiberglass extension pole to fit above ground sets and ground lifting tool 4.1 lbs.
546-8 1-1/4" x 8' fiberglass extension pole to fit above ground sets and ground lifting tool 5.4 lbs.
For factory assembled ground set:
1. Specify Cat. No. of pole mounted ground clamp
2. Specify Cat. No. of ground clamp to be installed on opposite end of cable for clamps
3. Specify Ground cable size, color and length for grounding cables

Capacitor Discharge Tool & Electrostatic Precipitator Grounding Tool

Discharge Tools

Above, top: Capcitor Discharge Tool
Above, bottom: Electro Static Precipitator Grounding Tool

Cat. No. Description Weight

Capacitor Discharge Tool

The Capacitor Discharge Tool is designed to safely drain the capacitive charge after the circuit is de-energized. An optional add on resistor to limit discharge current is available and shown below.
The Discharge Tool is factory assembled to include the following components:
• 24 inch 1-1/4" O.D. Fiberglass Pole with Handguard. The Fiberglass Pole is electrically tested to OSHA and ASTM F-711 Standards.
• 1/4" Stainless Steel Hook with a 1-3/8" opening.
• Furnished with extra flexible No. 2 Str. Copper Grounding Cable with safety yellow Neoprene Jacket. A Two hole, Tin plated Copper Lug is terminated on one end with a heat Shrink Sleeve.
• A Rubber Tool holder is included for storage of the Tool (Part No. P30128).

1004 Discharge tool with 6 ft. grounding lead 2.7 lbs.
1005 Same as above supplied with 8 ft. lead 3.2 lbs.
1006 Same as above supplied with 10 ft. lead 3.8 lbs.
1007 Same as above supplied with 15 ft. lead 5.2 lbs.
1008 Same as above supplied with 20 ft. lead 6.6 lbs.
6753 Add on resistor stick. Resistor is rated at 10KV, 10 megohm .7 lb.

ELECTRO STATIC PRECIPITATOR GROUNDING TOOL
The Electro Static Precipitator Tool is designed to safely remove the static charge after de-energizing for service work.
Grounding tool is factory assembled to include the following components:
• Brass alloy "U" shaped hook to engage precipitator plates.
• 4 foot x 1-1/4" fiber glass pole for installation. The fiber glass pole has a solid unicellular foam core and is tested to OSHA and ASTM F-711 specifications.
• 6 feet of No. 2 Str. extra flexible copper grounding cable. Cable jacket is bright yellow neoprene for durability.
• Aluminum alloy "T" handle flat face ground clamp can be attached to flat, round and square hardware.
• Serrated jaws open to 1-1/2" capacity.

6768 Factory assembled electro statc precipitator grounding tool 8 lbs.

Grounding Equipment
Grounding Equipment

Ground Clamps for Substation Grounding with Threaded Terminals 5/8" - 11 NC Threads
Cat. No. Description Main Line
Range Max.
Main Line
Range Min.
Max. Jumper
Cable
Max. Fault
Current Rating
Min. Install
Torque
Weight
21070 Single ground clamp
Bronze alloy
2.88 O.D. cable or bus 6 Solid
.16 dia.
4/0 Str. w/ferrule 43KA @ 15 cycles
30KA @ 30 cycles
275 in. lbs. 3.25 lbs.
10375 Single ground clamp
Aluminum alloy
2" dia. cable or bus 4 Solid
.18 dia.
4/0 Str. w/ferrule 43KA @ 15 cycles
30KA @ 30 cycles
275 in. lbs. 1.8 lbs.
10375-1 10375 ground clamp mounted on a 1-1/4" x 6' fiberglass pole 2" dia. cable or bus 4 Solid
.18 dia.
4/0 Str. w/ferrule 43KA @ 15 cycles
30KA @ 30 cycles
275 in. lbs. 3.8 lbs.
Note: ground clamps can be mounted on other lengths of 1-1/4" dia. fiberglass poles. Please specify when ordering

Miscellaneous Grounding Equipment
Cat. No. Description Weight
4730 Screw ground rod with 5/8" dia. Copperweld rod and 12" bronze handle. 72" overall length 6.1 lbs.
9738 Adjustable stringing ground accepts conductors from 6SOL-795 ACSR. Self lubricating rollers. Aluminum alloy with treated steel parts. Tested to 19,000 amps. Accepts 1/0 ground cable 3.2 lbs.
12423 Ground cable splice. 4/0 Str. cable max
• Used for connecting two ground cables together
1 lb.
5755-6 Ground cable splice. 2/0 Str. cable max
• Used for connecting ground cables together
3 lbs.

Grounding Cables & Grounding Cable Ferrules

Grounding cables and grounding cable ferrules

Above, bottom row:
left - Compression ferrules for bolted type terminals (tin plated copper)
right - Compression ferrules for 5/8" NC threaded type terminals (tin plated copper)

Copper stranded Grounding Cable

  • Tough jacket material for long wear
  • Fine strands for flexibility
  • Easy to strip for preparation
Cat. No. Size Plug Strands Wire Dia. - Inches Overall Dia. - Inches Weight per 1000 ft.
Black Jacket Copper Ground Cable
10491 #2 665 .320 .435 299 lbs.
10492 1/0 1064 .410 .570 457 lbs.
10493 2/0 1323 .470 .620 555 lbs.
10494 4/0 2107 .590 .740 871 lbs.
Yellow Jacket Copper Ground Cable
9206 #2 665 .320 .435 263 lbs.
9201 1/0 1064 .410 .570 414 lbs.
13698 2/0 1323 .470 .620 504 lbs.
9228 4/0 2107 .590 .740 775 lbs.
Clear Jacket Copper Ground Cable
13692 #2 665 .350 .530 300 lbs.
21263 1/0 1064 .450 .640 475 lbs.
13701 2/0 1323 .490 .700 565 lbs.
21264 4/0 2107 .620 .840 856 lbs.
Note: Strands shown above are per ASTM 855. All Hastings grounding cable is manufactured to ASTM standards
Fault Current Rating Table For Grounding Cable
Ground Cable Size AWG Rating In Amperes Symmetrical RMS 60 HZ
15 Cycles 30 Cycles
#2 14,500 amps 10,000 amps
1/0 21,000 amps 15,000 amps
2/0 27,000 amps 20,000 amps
4/0 43,000 amps 30,000 amps

Grounding Cable Ferrules
Cat. No. Size AWG Alcoa Die Burndy Die Kearney Die
Ferrules for Bolted Type Terminals
11656 #2 B71AH * *
11657 1/0 B72AH U241 510
11658 2/0 B73AH U243 9 / 16
11660 4/0 B74AH U694 11 / 16
* Custom dies can be supplied for Burndy Y-35 and Kearney WH-2 tools
Ferrules for 5/8 - 11 NC Threaded Terminals
12998 #2 B73AH U165 9 / 16
12999 1/0 B73AH U166 5 / 8-1
13000 2/0 B74AH U166 11 / 16
13001 4/0   U168 15 / 16
Note: Huskie Too Die No. Z-11 may be used on Cat. No. 13001 Ferrule

Grounding Cable Ferrules with Factory Applied Heat Shrink
Grounding cable ferrules with factory applied heat shrink
  • Provides positive stress relief of grounding cables at their terminations
  • Clear heat shrink allows visual inspection of cable strands and termination
  • Heat shrink materials provides a barrier to resist moisture and corrosion at the termination
  • Two styles available: ferrules with 5/8-11 NC threads and ferrules for bolted type terminals
  • Heat shrink sleeve is 5" long
  • Ferrules are tin plated copper
Cat. No. Size AWG Ferrule Type Weight Cat. No. Size AWG Ferrule Type Weight
Factory Installed Ferrules Factory Installed Ferrules
6756 #2 Compression-bolted type 4 oz. 6760 #2 Comp. 5/8-11 NC Threads 4 oz.
6757 1/0 Compression-bolted type 4 oz. 6761 1/0 Comp. 5/8-11 NC Threads 4 oz.
6758 2/0 Compression-bolted type 4 oz. 6762 2/0 Comp. 5/8-11 NC Threads 4 oz.
6759 4/0 Compression-bolted type 4 oz. 6763 4/0 Comp. 5/8-11 NC Threads 4 oz.
Ordering Info. Specify grounding cable type, size and length from tables above. Order proper ferrule with heat shrink to fit cable and ground clamp termination. * Above units are factory installed.
Ferrules Only — Not Installed Ferrules Only — Not Installed
P30244 #2 Compression-bolted type 4 oz. 12998 #2 Comp. 5/8-11 NC Threads 4 oz.
P30245 1/0 Compression-bolted type 4 oz. 12999 1/0 Comp. 5/8-11 NC Threads 4 oz.
P30246 2/0 Compression-bolted type 4 oz. 13000 2/0 Comp. 5/8-11 NC Threads 4 oz.
P30247 4/0 Compression-bolted type 4 oz. 13001 4/0 Comp. 5/8-11 NC Threads 4 oz.
P50349 5" long heat shrink tube 1 oz. P50349 5" long heat shrink tube 1 oz.
Note: Cat. No. P50349 heat shrink O.D. range is 1.3" max to .375" min.

Distrbution / Sub Transmission Grounding Set
Transmission Grounding Sets

DISTRIBUTION/SUB TRANSMISSION GROUNDING SET
The distribution/sub transmission grounding set is factory assembled and can be used on a three phase grounded wye or Delta system.
The grounding set provides jumper lengths adequate for crossarm construction and armless (narrow profile) construction.
The grounding set includes a grounding cluster bar which enables the user to provide "single point" grounding practices if this method is approved on their system.
• Conductor Range - Ground set can be used on No. 6 solid (.16 O.D.) thru 1,033 MCM ACSR (1.25 O.D.)
• Grounding Jumpers - Jumpers are assembled with bright yellow neoprene jacketed copper grounding cable. This ground cable is very flexible in cold weather.
• Fault Current Rating - Ground sets can be ordered with proper cable size to match customers fault current needs.

Grounding Set Components
Item Quantity Description
A 10 Cat. No. 21575 ground clamp
B 10 Grounding cable ferrule (threaded)
C 1 Cat. No. 6767 grounding cluster bar
D 1 Cat. No. 4370 screw ground rod
E 3 cables 6' long Yellow jacketed grounding cable
  1 cable 12' long Yellow jacketed grounding cable
  1 cable 30' long Yellow jacketed grounding cable
F 3 (not shown) Cat. No.
Cat. No. Description Fault Current Rating Weight
6870 Grounding set with #2 Str. CU ground cable 10,000 amps - 30 cycles 47 lbs.
6871 Grounding set with 1/0 Str. CU ground cable 15,000 amps - 30 cycles 56 lbs.
6872 Grounding set with 2/0 Str. CU ground cable 20,000 amps - 30 cycles 62 lbs.
6873 Grounding set with 4/0 Str. CU ground cable 30,000 amps - 30 cycles 77 lbs.
7254 Storage bag for grounding set 2 lbs.

Grounding Equipment for Underground Applications
Grounding equipment for underground applications
Cat. No. Description Weight Cat. No. Description Weight
6715 Aluminum alloy ground clamp with spike* 2.1 lbs. 6716 Grounding set w/6 ft. 1/0 copper ground cable. Includes flat jaw clamp - Cat. No. 9153 6.3 lbs.
P30210 Replaceable spike 0.1 lb. 01-4007 Carrying and storage bag. Will hold up to 3 complete sets 1.9 lbs.
Three phase URD grounding set - 15KV Three phase live front grounding set
6717 Grounding set w/6 ft. 1/0 Cu. ground cables, terminal block and flat jaw ground clamp. Rated 10,000 amps for 10 cycles 18 lbs. 6718 Grounding set w/6 ft. 2/0 Cu. ground cables, terminal block and flat jaw ground clamp. Rated 27,000 amps for 15 cycles 18 lbs.
01-4007 Carrying and storage bag. 1.9 lbs.   Carrying and storage bag. 1.9 lbs.

Grounding Sets
Grounding Sets
Cat. No. Description Weight Cat. No. Description Weight
URD Transformer Grounding Set - 25KV - 1Ø Three Phase URD Grounding Set - 25KV
6776 Grounding set w/6 ft. 1/0 Cu. grounding cable. Includes flat jaw clamp Cat. No. 9153 7.6 lbs. 6777 Grounding set w/6 ft. 1/0 Cu. grounding cables, terminal block and 9153 flat jaw clamp 32.2 lbs.
01-4007 Carrying and storage bag. Will hold up to 3 complete sets 1.9 lbs. 01-4007 Carrying and storage bag. Will hold up to 3 complete sets 1.9 lbs.
URD Transformer Grounding Set - 35KV - 1Ø Three Phase URD Grounding Set - 35KV
6778 Grounding set w/6 ft. 1/0 Cu. grounding cable. Includes flat jaw clamp Cat. No. 9153 7.6 lbs. 6779 Grounding set w/6 ft. 1/0 Cu. grounding cables, terminal block and 9153 flat jaw clamp 32.2 lbs.
01-4007 Carrying and storage bag. Will hold up to 3 complete sets 1.9 lbs. 01-4007 Carrying and storage bag. Will hold up to 3 complete sets 1.9 lbs.

Grounded Parking Stand Assemblies
Grounded parking stand assemblies
  • For padmount transformer applications
  • Pre-assembled grounded parking stands for 15KV and 25KV URD systems
  • Allassemblies utilize 6 ft. of 1/0 yellow ground cable
  • Versatility of the ferrule termination, (threaded or non-threaded) allows for the selection of a wide variety of ground clamps
  • Lug termination on the bushing and the ferrule termination are both sealed with heat shrink, which prevents the entry of moisture into the connection plus provides added stress relief to the termination
  • All assemblies fault current rated at 10,000 amps for 10 cycles
Cat. No. Description Weight Carrying/Storage Case
6771 15KV grounded parking stand w/threaded ferrule 5.5 lbs. 01-4007 or 7254
6772 15KV grounded parking stand w/plug terminal ferrule 5.5 lbs. 01-4007 or 7254
6773 25KV grounded parking stand w/threaded ferrule 6 lbs. 01-4007 or 7254
6774 25KV grounded parking stand w/plug terminal ferrule 6 lbs. 01-4007 or 7254
Note: Either storage case will hold (3) parking stands (dust cap included on all bushings)
01-4007 case has a handle & velcro closure, 7254 is a drawstring bag

Truck Grounding Reels
Truck Grounding Reel

TRUCK GROUNDING REEL(Spring Retractable)
Compact designed grounding reels provide an efficient and positive means to ground trucks working on or near energized electric lines. Grounding reels have been tested for maximum fault current rating. Test Data available. The ground connection from reel to the vehicle, is made during the initial installation. Due to this design, operators only need to connect the free end to a suitable ground ie; system neutral or screw grounding rod.

• Reels are designed to be bolted to the vehicle so they can be removed easily for transfer to new trucks.
• Spring rewind drum for controlled payout and take up. 4 way cable guide rollers allow for one man operation and prevents excessive wear on the ground cable.
• Two models available to ensure adequate cable lengths to meet truck grounding requirements.
• Weather tight construction to prevent corrossion.
• Reel is painted safety yellow w/polyester paint.

NOTE: Retractable Reel Model 21362 will store and operate with a maximum of 40 feet #2 Str. 1/0 Str. and 2/0 Str. grounding cable only.
Retractable Reel Model 21366 will store and operate with a maximum of 65 feet #2 Str., 65 feet 1/0 Str., 60 feet 2/0 Str. and 50 ft. 4/0 Str.
To order Cat. No. 21366 with cable and clamp factory installed, specify cable size and length when ordering.

All ground reels with factory installed cables include a 6 ft. length of 2/0 Cu.Str. ground cable to connect the reel to the truck. A Cat. No. A30205 4-way bronze tee connector is provided to connect one end of the cable to the ground stud on the reel. The other end must be connected to the truck frame by a suitable means.

Cat. No. Description Weight
21362 Retractable grounding reel only. Tested to 27,000 amps @ 15 cycles 32 lbs.
21363 Cat. No. 21362 reel with 40 ft. No. 2 Str. Cu. ground cable (yellow) factory installed and Cat. No. 21307 bronze clamp one end 47 lbs.
21364 Cat. No. 21362 reel with 40 ft. 1/0 Str. Cu. ground cable (yellow) factory installed and Cat. No. 21307 bronze clamp one end 52.5 lbs.
21365 Cat. No. 21362 reel with 40 ft. 2/0 Str. Cu. ground cable (yellow) factory installed and Cat. No. 21307 bronze clamp one end 56.45 lbs
21366 Retractable grounding reel only. Tested to 43,000 amps @ 15 cycles 83 lbs.
01-029 Cover, yellow vinyl, for 21362 grounding reel 2 lbs.

Ball Socket Ground Clamp
Ball Socket Ground Clamps

THe "new" ball socket ground clamp from Hastings is a multi-purpose grounding clamp designed to safely and effectively apply grounds to your electrical system. When used with the ball stud shown above right, the ball socket ground clamp will allow workers to ground equipment such as:

  • Substations
  • Switchgear
  • Bus Work
  • Towers
  • Line Trucks
  • Bucket Trucks
  • Stringing Equipment
Cat. No. Description Range Max. Cable Max. Fault Current Weight
21720 Ball socket ground clamp 1" O.D. ball stud 4/0 Str. w/Ferrule 43KA @ 15 cycles
30KA @ 30 cycles
.75 lb.
21721 Ball Stud --- --- 43KA @ 15 cycles
30KA @ 30 cycles
.5 lb.

Portable Protective Ground Mat
Ground Mats

PORTABLE - PROTECTIVE GROUND MAT

The new Portable-Protective "Ground Mat" from HASTINGS provides a method for workers to establish an equal potential zone for multiple grounding applications. The GROUND MAT is manufactured of vinyl-polyester fabric, with high ampacity, tinned-copper braid sewn into a grid pattern. The braided copper on the grid connects to a six inch termination stud on the corner of the mat. The ground mat is then bonded to the equipment being worked on by using a safe and reliable ground cable assembly.

WORK APPLICATIONS:
• URD Padmount Transformers and Switchqear: Creates an equal potential zone similar to that of a ground cluster bar used with a single point grounding overhead application.
• Transmission and Distribution, pole mounted, gang operated switches: When the operator is standing on the ground mat, "step-and-touch" potential is eliminated when hand contact is made with the switch handle while both feet are on the ground mat.
• Line Apparatus: Any operation where the operator must stand on the ground to operate equiment such as pole mounted devices, the ground mat can be used. Such as installing, maintaining, or operating regulators, reclosers, capacitor banks, and metering.
• Substation Grounding Grids: When working inside substations and the ground grid is in question, the portable protective ground mat can be used. The ground mat is not meant, nor intended to replace the grounding grid.
• Stringing Operations: Multiple Mats in the larger configurations can be bonded together to park stringing equipment on for stringing operations.

FEATURES AND BENEFITS:

FEATURE
> Anti-Skid Material Available
> Three Sizes Available
> Bond Multiple Mats Together
> Two Materials Available
> Foldable and Reliable ,
> Bonded Stud Termination Factory Assembled
> Reversible
> Easy to Clean

BENEFIT
> The best choice for snow or rain conditions
> Select the size for your specific application
> Create a larger work area
> Standard Yellow & Black Anti-Skid Material
> Easy to store
> Use your own pre-assembled grounds to create Equal-Potential Zone
>Can be used with either side up
> Standard hose pressure or a power washer (Allow mat to dry before storing)
Cat. No. Description Color/Material Weight
Standard Mat
6610 58" x 58" Yellow vinyl/polyester 5 lbs.
6615 58" x 120" Yellow vinyl/polyester 10 lbs.
6620 120" x 120" Yellow vinyl/polyester

20 lbs.

Anti-Skid Mat
6610-NS 58" x 58" Black hypalon marine fabric 5 lbs.
6615-NS 58" x 120" Black hypalon marine fabric 10 lbs.
6620-NS 120" x 120" Black hypalon marine fabric 20 lbs.
To purchase ground mats with a connecto for bonding multiple mats together, add -C to the catalog number. Example: 6620-C

Portable - Protective Ground Mats
Ground Mats

> OSHA: 1910.269(n)(3) states...

"Equipontenial Zone." Temporary grounds shall be placed at such locations and arranged in such a manner as to prevent each employee from being exposed to hazardous differences in electrical potential. (The HASTINGS Ground Mat accomplishes this similarly to a grounding cluster bar used on a single point grounding overhead application.)

> Methods of Use:

When installing or placing the ground mat, the cable grid can be placed facing down or facing up. With the grid face-up it will wear faster than face-down placement. On face-down placement, be sure and guard against, rocks and loose debris that may damage the grounding braid. Inspect your work site and
choose the best possible application.

> Applications:

The HASTINGS Ground Mat can be applied to most applications using the customers own personal protection ground cable assemblies. The "standard" Ground Mat comes with one 6-inch ferrule, compressed on the copper braid at one corner of the mat. This is the attaching point for installing your ground cables and bonding the mat to the equipment being worked on. As shown below the Ordering Information on the previous page, multiple mats can be bonded together by ordering the mats with a flat one-hole spade compressed on to the braided cable at the opposite corner from the 6-inch ferrule. The one-hole spades can be bolted together to bond the multiple mats. The mats can then be secured to one another with Vn" rope or standard nylon lock-ties.

> Care and Maintenance:

Cleaning: Normal water hose pressure or a pressure-washer can be used to clean ground mats. (Allow mat to dry before storing.)
Storage: The mat may be rolled or folded to fit in storage bins or containers. Continual folding of the mat in the exact same manner may create more stress on the cable braid if always folded at the same point.
Inspection: Should the braided conductor making up the grid become severed, the ground mat should not be used and must be removed from service immediately.

• Any corrosion, dirt, or sediment must be removed from the grid conductor as soon as possible to avoid damage to the grid.
• Before each use inspect the cable to ferrule termination for any broken cable strands or fatigue.

WSP home page Products page Suppliers page  
Electrical Safety Hastings Index Previous Hastings Page Next Hastings Page