Filter Result By

Browse

Manufacturers

MSA V-Gard Visors: Elevated Temperature with High-Performance Anti-fog/Anti-scratch Coatings

MSA V-Gard Visors: Elevated Temperature with High-Performance Anti-fog/Anti-scratch Coatings

Manufacturer: MSA

Product Code: 10115844

MSA V-Gard Visors: Elevated Temperature with High-Performance Anti-fog/Anti-scratch Coatings

MSA V-Gard molded polycarbonate visors offer superior protection from flying debris, splash, UV radiation and molten metal. Being molded makes them optically correct, and helps ensure clear vision and reduced eye fatigue. The anti-fog and anti-scratch coatings increase comfort and improve wear.



Features & Benefits

  • Thicker than most visors in the marketplace, which not only helps ensure impact resistance, but also reduces heat warping
  • Molded for superior optical quality
  • Wide, longer design for improved resistance to impact and splash hazards
  • Maximum UV protection
  • Premium anti-fog and anti-scratch coatings
  • Almost all versions can be perfectly combined with helmet-mounted ear muffs
  • Visor with green tint (p/n 10115845) helps alleviate eye strain and fatigue by reducing excessive glare, especially in outdoor working conditions.
  • Designed for use with V-Gard Frames and V-Gard Headgear

 

Classification: Elevated temperature
Markets: Food manufacturing/canneries, steel mills, construction, open-pit mining, agriculture, oil/gas/petrochemical refineries, rubber manufacturing, steam tunnels
Application: Food processing, machine operation, maintenance, millwright, cutting, punching, extrusion, drilling, blasting, casting/conveying, chemical mixing, sanding
Material: Polycarbonate with EN166 performance-rated anti-fog and anti-scratch coatings
Color(s): Clear
Available Styles: Molded
Sizes: Varies; see “Product Specifics” in Ordering Information chart
Features: EN166 performance-rated anti-fog/anti-scratch coatings (N, K marks, respectively)
Impact-rated (Z87+)
Maximum UV protection (“U6”)
Not for protection against radiant heat or IR hazards.
Standards1: ANSI/ISEA Z87.1-2010; EN 166 (2C-1.2 MSA 1BT89KN); CSA Z94.3 and AS/NZS 1337
Certifications: Third-party by Intertek, INSPEC International Ltd., CSA International and SAI Global Ltd.


 

V-GARD VISORS
FOR ELEVATED
TEMPERATURE
APPLICATIONS
  Part No. Product Specifics
  10115844 • 9.25” (23.5 cm) x 17” (43.2 cm) x .098” (2.5mm)
• Extra-thick visor helps prevent warping, cracking or crazing under tough conditions
• Conditioned to a high of 131°F and a low of 23°F, and then tested to the medium impact rating in the EN166 standard (higher impact speed than
ANSI/ISEA Z87.1-2010)
• Visors do not reflect IR; not recommended for use against radiant heat hazards
  10115846 • 9.25” (23.5 cm) x 18” (45.7 cm) x .098” (2.5mm)
• Extra-thick visor helps prevent warping, cracking or crazing under tough conditions
• Extended length for greater coverage of face and neck
• Conditioned to a high of 131°F and a low of 23°F, and then tested to the medium impact rating in the EN166 standard (higher impact speed than
ANSI/ISEA Z87.1-2010)
• Visors do not reflect IR; not recommended for use against radiant heat hazards

 

1 Standards requirements met by each V-Gard Frame or Headgear/V-Gard Visor combination designated on each V-Gard Visor.

Related Categories


Request a Quote Now

Request a Quote X

Your Name*
Please let us know your name.

Company Name
Invalid Input

Your Email*
Please let us know your email address.

Phone*
Invalid Input

Category*
Please enter valid Product/Category

Product Url
Enter valid Product Url

Comment
Please let us know your message.

Captcha*
Captcha   RefreshPlease enter the right CAPTCHA

Processing...