Filter Result By



Bluewater Architectural Series Roof Guardrail System

Bluewater Architectural Series Roof Guardrail System

Manufacturer: Bluewater

Product Code: ArchSeries

Bluewater Architectural Series Roof Guardrail System

For applications where appearance is important.

SafetyRail 2000 Architectural Series is perfect for new building construction, adding passive fall protection to an existing building, or as an addition to existing guardrails.

When you are looking for a safe, more aesthetically appealing fall protection system, the SafetyRail 2000 Architectural Series is the perfect choice. It combines our non-penetrating guardrail system with architectural appeal for applications where railing appearance is important. The system has a pleasing sightline and can enhance the appearance of a building while maintaining the utmost in fall protection. Like the SafetyRail 2000 System, the Architectural Series requires no penetration to the roof surface when installed and complies with OSHA (Standards — 29 (FR) 1910.23 and 1926.502.

Why choose the Architectural Series

  • More pleasing sightlines
  • No drilling necessary to install
  • Complies with OSHA Regulations for fall protection
  • No intermediate counterweights required
  • Custom engineering/manufacturing available for special applications
  • Curved, incline and straight stanchions are also available
  • Deemed OSHA compliant by an independent accredited engineering firm
  • Optional EPDM rubber pads and BUR pads available for added roof surface protection


OSHA Compliance

Compliant with regulations for guardrails:

  • 29 CFR 1910.23
  • 29 CFR 1926.502

Minimum Requirements

In order to meet OSHA regulations for fall protection, outriggers must be utilized (return/counter weights). Whether the Danger Side Run is 5' or 1000' in length, you must have these in place at the beginning and at the end of the run. Outriggers are standard rail kits that are connected at approximately 90o to the Danger Side Run of each end rail section.


Product Specifications

Roof Edge Protection: Provides freestanding fall protection system on roof top.
Approved products Architectural Series Guardrail System
Standards: System Shall have top and mid rail in accordance with OSHA Standards - 29 CFR 1910.23 and CFR 1926.502
Structural Load: 200 lb (90.7 kg), minimum, in any direction to all components in accordance with OSHA Regulations 29 CFR 1910.23 and CFR 1926.502
Height: 42 inches (1067 mm), minimum
Railings: 1.66" O.D. galvanized pipe
Mounting Bases: Class 30 gray iron material cast with four receiver posts. Base weight 108 lbs and 48 lbs per square foot. Rubber pads on base bottoms.
Receiver Posts: Shall have a positive locking system into slots that allow rails to be mounted in any direction. Friction locking systems are not allowed. Receiver posts shall have drain holes.
Hardware: Securing pins shall be 1010 carbon steel, zinc plated and yellow chromate dipped. Pins shall consist of collared pin and lanyard that connects to lynch pin.
Finishes: Available in standard Hot-Dip Galvanized. Custom colors available.


Surface Protection Pads: EDPM Rubber Pads and Bur Pads are available


Independent Test Results

Load Testing available on request.

Related Categories

Request a Quote Now

Request a Quote X

Your Name*
Please let us know your name.

Company Name
Invalid Input

Your Email*
Please let us know your email address.

Invalid Input

Please enter valid Product/Category

Product Url
Enter valid Product Url

Please let us know your message.

Captcha   RefreshPlease enter the right CAPTCHA