For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.
We accept VISA and Mastercharge.

Electrical Lockouts

	Breaker switch lockouts allow breakers to be locked out safely. Model BLO1 is designed to fit most major brand single pole breakers. The BLO3 is designed to fit multi pole breakers. The BLO4 is a "No Hole" breaker lockout designed to fit circuit breaker toggles up to 1/2" wide without a recess hole in the toggle. Unit is fastened by tightening the screw and then applying a padlock which prevents access to the screw.
	The BLO5 is designed to lockout large circuit breakers with single toggles up to .8" thick and 3" wide. Fit the device over the toggle and tighten the supplied knurled thumbscrew down on the toggle. Verify secure attachment and bend the hinged screw over and apply lock.
	ES14380 9" GFCI extension cable
	PLO21 For smaller 110/220 plugs up to 2 1/2" long and 1 3/4" diameter with a maximum cord diameter of 1/2"
	PLO23 Accommodates plugs up to 3" in diameter and 5 1/2" long with a maximum cord diameter of 1 1/4".
	ESAC600 AC Voltage Sensor. Check for A.C. voltage safely and accurately. The tip glows in the presence of AC voltage - senses through insulation. Locates blown fuses, defective breakers, neutral/live wires. Alkaline battery included.
	WSLO Wall Switch Lockout. Clear plastic lockout uses existing wall plate screws to mount. When locked closed, this device prevents inadvertent switch access. (lock not included).

Valve Lockouts

	Round Valve Lockouts Round valve handles can present a special challenge for assuring lockout safety for equipment maintenance. The Safetee Donut® solves the problem. Application of a Safetee Donut® and a secure padlock will asssure that the valve will remain in the off or safe position. Five Models: Model Fits Valve handle diameter SD02 1" - 2 1/2" SD04 2 1/2" - 5" SD06 5" - 6 1/2" SD08 6 1/2" - 10" SD13 10" - 13"
	CABLO Cable Lockout Device as shown. Cable available separately. The CABLO has the flexibility to lockout a large variety of devices using a flexible plastic coated 6 ft. steel cable an a unique hasp lockout device that accepts up to six 9/32" diameter padlocks. The CABLO helps prevent accidental or inadvertent energization of devices to which it is properly secured.
	Ball Valve Lockouts Ball valve lockouts are designed to prevent inadvertent or unintentional activation of a quarter turn type ball valve. These devices fit most major brands, are easy to use and do not require special padlocks to apply. Made from polypropylene plastic, these ball valve lockouts will help you comply with OSHA regulations. Three Models: Model Fits Valve Sizes BS01 3/8" - 1 1/4" BS02 1 1/2" - 2 1/2" BS03 2" - 8"

WSP home	Products	Suppliers	Lockout Index
Prinzing Index	Previous Page	Next Page