Peltor's new family of integrated radio headsets are designed with your business productivity in mind!
Always innovative and quick to incorporate the latest in electronics in our products, Peltor has achieved the ultimate in a communication product by combining a headset and 2-way radio all in onel The PowerCom series offers the most versatile set of features including frequency reprogramming and up to 2 miles of transmitting power and range, ideal for use in environments where long distance communicating is a must and environmental conditions change. The LiteCom series offers features ideal for short range communicating (200 yards), and fixed environmental conditions.
This family of integrated 2-way radio headsets are the perfect tool for communicating in high noise environments. Simple to operate and comfortable to wear, these headsets offer numerous features that will improve workplace efficiency.

PowerCom :: 462-467 MHz UHF Radio Headset

• NRR 25 dB headband model
• Optional hardhat clip-in model (NRR 23 dB) and neckband model (NRR 25 dB)
• Pre-programmed to 22 channels (GMRS-FRS frequencies). Channels are re-programmable - contact customer service for nearest authorized 2-way radio dealer
• 38 analogue privacy code subchannels (CTCSS)
• Voice activation or cup mounted push-to-talk transmission
• Noise canceling boom microphone
• Voice response mode selection confirmation selectable in English/Spanish/French
• Auxiliary jack for patchcords and a remote finger PIT
• FCC and Industry Canada approved
• 2 AA batteries required
  

PowerCom PLUS™ :: 462-467 MHz UHF Radio Headset

• The upgraded "PLUS" feature of this model are the 2 ambient pick-up microphones located on the outside of both cups. These microphones provide enhanced electronic ambient surround listening and distortion-free amplification of low level surrounding sounds up to 18 dB reproduced inside the cup
• All other features and functions are exactly the same as listed under PowerCom above
• Forestry communication kit includes the orange hardhat mount Powercom PLUS, wire mesh visor and hardhat with 6-point suspension
• Intrinsically Safe Approved part number models are certified to both CSA and Factory Mutual for use in hazardous locations

MT53H7A4610

Headband

MT53H7B4610

Neckband

MT53H7P3E4610

88022-00000

Forestry kit

MT53H7A4620*

LiteCom :: 49 MHz Radio Headset - Great for Tours!

• NRR 25 dB headband model
• Optional hardhat clip-in model (NRR 23 dB) and neckband model (NRR 25 dB)
• Pre-programmed to 5 licence free channels. Channels are NOT re-programmable
• Voice activation or cup mounted push-ta-talk transmission
• Noise canceling boom microphone
• Voice response mode selection confirmation selectable in English/Spanish/French
• Auxiliary jack for patchcords and a remote finger PIT
• FCC and Industry Canada approved
• 2 AA batteries required

Rechargeable Ni-MH Battery Kit

• Great accessory for Peltor product's requiring 2 AA batteries
• Mounts easily into earcup
• Includes a wall transformer and one battery pack (2.4V, 1400 mAh)
• Charger equipped with LED showing charging status
• Battery recharging time 4-5 hours
• Rated for approximately 500 recharges

FL6CS

Cell phone cable, 2.5 mini stereo plug

FL6CT

Receive only patch cord for entertainment devices, 3.5mm stereo plug

FL6BT

Receive only patch cord for 2-way radios, 3.5mm mono plug

FL6BS

Receive only patch cord for 2-way radios, 2.5mm mono plug

FL6BR

Downlead cable for connecting to a secondary/auxiliary 2-way radio, requires mating radio specific FL50 PTT adaptor, contact customer service

TK56

Remote ring finger Push-to-talk button, 48" straight cable

FL5503

Remote lapel PTT button (plugs into bottom of headset)

MT90-01

Throat microphone

M995

Boom microphone wind sock

M60/2

Cup microphone windscreen for PowerComPLUS headsets

HY79

Replacement black ear seals and foam inserts (pair)

FP9007-US

Peltor's headsets are designed for industrial users working in high noise environments.
They offer the versatility along with the protection, durability and comfort that you expect from the worldwide leader in communication headsets.
Clear, reliable communication is essential, and sometimes life threatening, in any high noise radio communication environment. That is why Peltor uses only the latest technologies in both earcup design and electronics. All Peltor headsets have the highest quality audio and transit specifications enhancing the communication capabilities of the user and making them the ideal choice for demanding industries such as:

• Heavy equipment operators
• Construction
• Manufacturing
• Agricultural
• Racing
• Forestry

MT Series
H79 High Noise Headsets

• NRR 25 dB headband model
• Optional hardhat clip-in model (NRR 21 dB) and neckband model (NRR 24 dB)
• Noise canceling boom microphone
• Soft foam earcushions
• Deep earcup design for all day comfort
• Radio specific FL50 push-ta-talk adaptor cable required (sold seperately)

MT7H79A

Headband

MT7H79B

Neckband

MT7H79P3E

Clip-in hardhat mount

MT90

Throat microphone accessory

MT Series
H10 Extreme Noise Headsets

• NRR 27 dB headband model
• NRR 26 dB hardhat mount
• Noise canceling boom microphone
• Deep earcup design for all day comfort
• Radio specific FL50 push-to-talk adaptor cable required (sold separately)
  

MT Series
Fireman Helmet and Wide Brim Hardhat Compatible

• NRR 23 dB
• Noise canceling boom microphone
• Neckband model only available
• Soft foam earcushions
• Velcro crown strap fully adjustable
• Radio specific FL50 push-to-talk adaptor cable required (sold separately)

MT7H31B

Neckband

MT7H31Bl

Neckband with nght ear slotted & empty for ambient listening

MT90

Throat microphone accessory

All headsets on the tables below require a mating FL50 Push-to-talk adaptor cable and will work with any new/old/existing radio's. Simply select the appropriate adaptor for your radio.

Heavy duty in-line push-to-talk adaptor cable has headset jack built in, comes with radio specific cable/plug assembly, is waterproof, and has a 360 degree rotating clothes clip.

FL5014

Motorola GP300 style plug

FL5017

Motorola 3.5mm stereo threaded Visar style plug

FL50l8

Motorola HTlOOO plug style

FL50l2

Motorola 6-pin Hirose plug style

FL5030

Motorola HT750 plug style

FL5034

Icom right angled 2.5/3.5 plug style

FL5035

Kenwood 2.5/3.5 plug style

FL5078

Kenwood modular side mount plug style

FL5010

Icom straight 2.5/3.5 plug style

TKD5502/1

MT Series
Lightweight Low/No Noise Application Headsets

• Stainless rubber-coated steel band
• 2 sided and 1 sided models available
• Earpieces and band are height adjustable
• Noise canceling boom microphone
• Radio specific FL50 push-to-talk adaptor cable required (sold separately)

TacticalPRO Series
Electronic Ambient Listening Headset

• Ideal for forklift drivers
• NRR 26 dB
• Optional hardhat clip-in model (NRR 22 dB) and neckband model (NRR 25 dB)
• Noise canceling boom microphone
• Ambient listening cup microphones provide distortion-free, amplification of low level sounds up to 18 dB
• Auto shutdown power saving feature
• 2 AA battery compartment for 270 hours of operation
• Rechargeable battery pack available (see above)
• Radio specific FL50 push-to-talk adaptor cable required (sold separately)

MT15H7A-07 SV

Headband

MT15H7P3E-07 SV

MT15H7B-07 SV

Neckband

MT90

Throat microphone accessory

MT Series
Throat Microphone/Earpiece Combination

• Ideal for respirator communication
• Lightweight, compact
• Earpiece is adjustable for different ear sizes
• Throat microphone includes an adjustable neckstrap with buckle snap
• Optional version with earplug available for higher noise situations
• Radio specific FL50 push-to-talk adaptor cable required (sold seperately)

HT Series :: Listen-Only Headsets

• NRR 25 dB headband model
• Yellow neckband bevelled model for use under widebrim hardhats
• Optional hardhat clip-in model (NRR 23 dB) and neckband model (NRR 24 dB)
• Multiple plug configurations
• All downlead cables hardwired into cups
• Soft foam earcushions
• Deep earcup design for all day comfort

HTM79A

Headband; 3.5mm mono plug

HTM79B-42

Neckband; 3.5mm threaded stereo plug

HTM79A-03

Headband; 2.5mm mono plug

HTM31B-42

Neckband, 3.5 mm threaded stereo plug, yellow bevelled cups

HTM79A-25

Headband, 1/4" mono wired plug

HTM79P3E

Hard hat mount; 3.5mm mono plug

HTM79A-42

Headband; 3.5mm threaded stereo plug

HTM79P3E-03

Hard hat mount; 2.5mm mono plug

HTM79B

Neckband;3.5mm mono plug

HTM79P3E-25

Hardhat mount, 1/4" mono wired plug

HTM31B

Neckband, 3.5 mm mono plug, yellow bevelled cups

HTM79P3E-42

Hard hat mount; 3.5mm threaded stereo plug

HTM31B-03

Neckband, 2.5 mm mono plug, yellow bevelled cups

HTM540A-395-BA

Headband model, NRR 27, blue cups

HTM79B-03

Neckband; 2.5mm mono plug

HTM540P3E-395-BA

Hardhat clip in model, NRR 26, blue cups

HTM79B-25

Neckband, 1/4" mono wired plug

HT Series
Listen-Only Headsets with Disconnect Cable Option

• Headsets with cup mounted jack
• Cables can disconnect from cup and be replaced/changed as required
• Downlead cables sold separately

HTM79A-49

Headband model, 2 cups, speakers in both earcups

HTM79A-49A

Headband model, 2 cups, speaker in one earcup only

HTM79B-49

Neckband model, 2 cups, speakers in both earcups

HTM79B-49A

Neckband mounted, 2 cups, speaker in one earcup only

HTM79P3E-49

Hardhat mount model, 2 cups, speakers in both earcups

HTM79P3E-49A

Cable options:

FL6N

3.5mm stereo plug, 3 foot straight cable

FL6N-01

3.5mm threaded stereo plug, 3 foot curly cable

FL6M

2.5mm mono plug, 3 foot straight cable

FL6M-03

2.5mm mono plug, 8 inch curly cable

FL6H

3.5mm mono plug, 3 foot straight cable

FL6H-03

3.5mm mono plug, 8 inch curly cable

TacticalPRO Series
Listen-Only Electronic Ambient Listening Headset

• NRR 26 dB
• Folding padded headband, optional neckband version also available (NRR 25 dB)
• Ambient listening electronics provide distortion-free, amplification of low level sounds up to 14 dB
• Audio jack for radio input monitoring (see above in HT Series Disconnect model listing for cable options)
• Incorporates new ASIC technology
• Auto shutdown power saving feature
• AA battery compartment for 1000 hours of operation
• Rechargeable battery pack available (see above)
  

Lightweight communication options with heavy-duty performance.
PTL Listen-Only: New "push-to-listen" ambient listening electronic technology. The electronics are turned on and off with a touch of a button located on the side of the earcup. In the other earcup is a speaker with an audio jack for plugging into lapel microphone audio jacks or CD/MP3 players. The PTL electronics will stay on for 30 seconds and then turn off automatically unless pressed again. Ideal application for workers in environments where intermittent ambient listening is required.
Lapel Mic: Allows users to conveniently transmit and receive radio messages remotely. It features an ergonomic low profile design with an 8 position, 360 degree swivel clothes clip. Ideal for users that do not wish to hold or remove a 2-way radio from their belt in order to transmit or hear instructions.
HearPlugs: Virtually weightless listen­only earpieces feature the unique combination of high-quality audio reception with a NLVAP certified noise reduction rating. In addition, the HearPlugs earpiece increases the efficiency of radios used in high noise by not having to repeat-or worse-miss important messages due to the inability of clearly understanding what is being transmitted over the radio.

PTL HT Series :: Listen-Only Headsets with "Push-to-Listen" Electronics

• NRR 25 dB
• PTL electronics are built into one earcup - speaker with audio jack are in the other earcup
• Single AA battery compartment for 270 hours of operation
• Audio listening patch cables sold seperately
• Cables can disconnect from cup and be replaced/changed as required

MT155H530A-49A

Headband model

MT155H530A-49A GB

Headband model- Hi-Viz

MTl55H530B-49A

Neckband model

MT155H530B-49A GB

Neckband model- Hi-Viz

MT155H530P3E-49A

Hardhat mount model

MT155H530P3E-49A GB

Cable options:

FL6N

3.5mm stereo plug, 3 foot straight cable

FL6M-03

FL6N-01

FL6H

3.5mm mono plug, 3 foot straight cable

FL6M

2.5mm mini mono plug, 3 foot straight cable

FL6H-03

Lapel Mic

• 3.5mm audio jack with rubber cover protector for when not in use
• Noise canceling microphone, high output speaker, water resistant housing
• Push-to-talk for radio transmit
• HTM06-02 HearPlug plugs into audio jack for monitoring radio messages in louder noise environments requiring hearing protection
• Heavy-duty polyeurothane curly cable assembly down to radio

88000-00000

with Motorola GP300 plug/curly cable

88001-00000

with Motorola HT1000 plug/curly cable

88002-00000

with Motorola HT750 plug/curly cable

88003-00000

with Motorola EX500 plug/curly cable

88004-00000

with Kenwood 2.5/3.5 plug/curly cable

88005-00000

with Icom straight 2.5/3.5 plug/curly cable

88006-00000

with Motorola FRS single pin plug/curly cable

88007-00000

with Motorola XTN 2.5/3.5 plug/curly cable

88008-00000

with Kenwood 0080 plug/curly cable

88034-00000

with Vertex VX-210 plug/curly cable

88042-00000

with Icom F30G plug/curly cable

HearPlugs :: Listen-Only Earpiece

• Available with reusable (NRR 21 dB) or disposable (NRR 29 dB)
• Unique plug with hole allows radio transmissions to pass through & be heard clearly
• Transducer limits volume spikes to 85 dBA
• Soft, medical grade acoustic tube comfortably wraps around behind the ear for a universal fit
• Plugs into any radio lapel speaker microphone with an audio accessory jack

HTM06

3.5mm mono plug, 25" straight cable

HTM06-02

HTM07

2.5mm mono plug, 25" straight cable

HTM07-02

HTM08

3.5mm threaded stereo plug, 25" curly cable

PELnP1

Reusable communication earplugs - box of 25 pair

PELnP2

Disposable communication earplugs - box of 100 pair

PELnP3

Almond color reusable communication earplug - 500 each / box

Bluetooth- Wireless Solutions Headsets
Connection without the restriction of wires! Introducing Peltor's new Wireless Solutions headset featuring the latest in Bluetooth- technology. This headset allows for ultimate flexibility when "synched-up". Transmit and receive without the need for interconnecting cords and wires.
Unbelievably convenient and easy to use! Within a few seconds of initially synchronizing the headset and adaptor to each other, they are ready to be used as a system. The synchronizing step is required once when first purchased, after which they are linked wirelessly even after being cycled on and off during non-use.

• NRR 25 dB headband model
• Multiple radio connector options available
• Optional hardhat clip-in model (NRR 21 dB) and neckband model (NRR 24 dB)
• Noise canceling microphone
• 2 AA batteries required
• Wireless between headset and adaptor up to 50 ft
• Rechargeable battery pack kit available

MT53H7AWS2

Headband model, NRR 25 dB

FL6014-11S

Motorola GP300

MT53H7BWS2

Neckband model, NRR 25 dB

FL6018-11S

Motorola HT1000

MT53H7P3EWS2

FL6030-11S

Motorola HT750/HT1250

FL6010-WS

Icom 2.5/3.5 plug

FL6035-11S

Kenwood TK260/270/350

Peltor has led the way in two-way headsets for over 50 years by combining state-of-the-art electronics and hearing protection to provide outstanding communication capabilities in very high noise environments.
Airports around the world depend on Peltor for reliable, glitch free and easy to use performance.
Peltor Ground Mechanic Headsets are designed to provide clear communications and hearing protection during high noise push-back and ground support operations. Plugging into the exterior aircraft intercom jack, two hardwired options include an in-line belt station push-to­talk (PTT) or cup mounted PTT and one wireless Bluetooth option

Ground Mechanic
Cup Mounted PTT Series

• NRR 25 dB
• Folding headband for compact storage
• Military grade, kevlar reinforced headset downlead cable 30"long
• Reinforced, easy to grip plug assembly
• Compatible with existing David Clark C31 series extension cables
• Thumb activated PTI button on left earcup
• Noise canceling microphone

MT7H79F-68

Cup PTT black cups

MT7H79F-68 GB

FL3-21

Curly extension cable - 11 to 18 feet

FL3-22

Curly extension cable - 22 to 29 feet

FL3-23

Straight extension cable - 40 feet

Ground Mechanic
Belt Station PTT Series

• NRR 25 dB
• Folding headband for compact storage
• 3 foot curly downlead cable with military grade connector/cable assembly
• Reinforced, easy to grip plug assembly
• Numerous length belt station push-to-talk cord assemblies
• Noise canceling microphone

MT7H79F-01

Cup PTT black cups

MT7H79F-01 GB

FL5006

Belt Station PTT curly cord assembly 11 - 18' long

FL5006-01

Belt Station PTT curly cord assembly 22 - 29' long

FL5008-01

Belt Station PTT straight cord assembly 40' long

Ground Mechanic Bluetooth Wireless Solutions Series

• NRR 25 dB headband model
• Wireless between headset and adaptor up to 50ft.
• Noise canceling microphone
• 2 AA batteries required
• Rechargeable battery pack kit available (see above)