#083 STANDARD BEVELED NOSING

• Apply to carpet matting that is cut onsite for a factory-finished appearance.
• Nosing lip is adhered underneath mat and produces the 1" "factory-look" beveled border.
• Overall thickness of 1 /8 inch.
• #086 Adhesive - 16 ounce can with brush top applicator; or 5 ounce tube
• #096 Roller - Application roller to press nosing strip into adhesive on mat.
• #083K Nosing Kit - includes 25 feet of Nosing, 5 ounce tube of adhesive and 1 application roller.

#084 HEAVY DUTY BEVELED NOSING

• Apply to carpet matting that is cut onsite and requires a stronger than average border.
• Nosing lip is adhered underneath mat and produces a 1 1/2" beveled border.
• Overall thickness of 1 /4 inch.
• #086 Adhesive - 16 ounce can with brush top applicator; or 5 ounce tube
• #096 Roller - Application roller to press nosing strip into adhesive on mat.
• #039K Nosing Kit - includes 25 feet of Nosing, 5 ounce tube of adhesive and 1 application roller.

VELCRO® CARPET ANCHOR SYSTEM #085 / #086 / #088 / #096

• Individual strips of Velcro® (male side) can be affixed to underside of vinyl-backed mat to "anchor" mat to looped pile carpeting.
• Be certain to thoroughly clean floor and underside of mat before applying.
• Recommend that the strips are affixed across width of mat at 3 foot intervals.
• #086 Adhesive - 16 ounce can with brush top applicator; or 5 ounce tube
• #096 Roller - Application roller to press Velcro strip into adhesive onto mat.
• #088 Velcro Kit - includes 15 feet of Velcro, 5 ounce tube of adhesive and 1 application roller.

Velcro® is a registred trademark of Velcro USA, Inc.

#090 MAT HOLD

• Rubberized mesh pad adheres to floor and underside of vinyl backed carpet mat.
• Will not stain carpeting or floors.
• Be certain to thoroughly clean floor and underside of mat before applying.
• Recommend that mesh pad is cut 6 inches narrower than mat on all 4 sides.

# 543 CUSHION-TRED™

• Sales Tip: Optional connector strip allows for attaching multiple mats. Optional beveled borders available for easy access onto mat.
• Where to Specify: Food prep or bar areas where workers stand for long periods of time.
• Extra heavy-duty perforated mat designed to provide maximum comfort while standing for long periods of time. A large-hole drainage system allows food and liquid spillage to channel away from the worker platform.
• Raised blades on top surface help minimize slips yet facilitate pivoting from repetitive movement.
• Available in 2 versions: (1) Black mat which is grease resistant and carries a 1-year warranty. (2) Red mat with extra nitrile content is grease-proof and carries a 5-year warranty.
• Overall thickness is 7/8 inch.

# 550 CUSHION-EASE®

• Sales Tip: Easy to make custom configurations on-site by utilizing the patent-pending #551 MD Ramp System TM.
• Where to Specify: Food prep areas where workers stand for long periods of time.
• A resilient rubber compound and unique support design offers exceptional fatigue relief. Large hole drainage design keeps moisture and debris free from worker platform.
• Optional borders available for trip-resistant platform.
• Available in 2 versions: (1) Black mat which is grease resistant and carries a 1-year warranty. (2) Red mat with extra nitrile content is grease-proof and carries a 3-year warranty.
• Overall thickness is 3/4 inch.

#544 COMFORT ZONE™

• Sales Tip: Great for stand-alone mat environments. Multiple mats cannot be connected.
• Where to Specify: Food prep areas where workers move on and off mats frequently.
• A solid rubber compound featuring a large-hole drainage system and a textured top surface which facilitates drainage and minimizes slippage.
• Broad-beveled borders on all 4 sides are an integral molded part of the mat.
• Available in 2 versions: (1) Black mat which is grease resistant and carries a 1-year warranty. (2) Red mat with extra nitrile content is grease-proof and carries a 3-year warranty.
• Overall thickness is 5/8 inch.

# 755 NIRU® VERSA RUNNER® & # 758 NIRU® KNOB-TOP RUNNER®

• Sales Tip: Ideal for long runs where low profile mats are needed for cart traffic
• Where to Specify: Wet or dry environments that require high traction and drainage capability.  
• Both mats are made of a durable grease-proof construction featuring 100% nitrile compounding in a continuous long length.
• #755 VERSA RUNNER® is 3/8 inch thick with slotted perforations for drainage.
• Ribbed underside enhances anti-fatigue value and channels liquid away from the mat.
• #758 KNOB-TOP RUNNER® is 1/4 inch thick, has a solid top surface and allows for cart traffic to easily pass over the mat.

# 523 MODULAR LOK- TYLE™

• Sales Tip: Tiles can be easily reconfigured to adapt to changing environments.
• Where to Specify: Locker rooms, shower areas, spa areas, restaurant shelving, bar areas
• Light-weight, modular, drainage design allows for use as shelf liners in food prep and bar areas
• Raised diamonds on top surface facilitates drainage and aids traction.
• Beveled Ramps and Corners complete the installation and minimize trip hazards.
• Overall thickness is 9/16 inch.

# 531 SAFETY GRID™

• Sales Tip: A bit more aggressive top surface than #523, Safety Grid™ is still comfortable for bare feet.
• Where to Specify: Locker rooms, shower areas, pool areas.
• Duckboard design constructed of resilient vinyl ensures years of use.
• Creates an elevated platform keeping traffic away from moisture.
• Top of rails features a saw-tooth design to minimize slippage.
• Overall thickness is 1/2 inch.

# 035 SKATE-SPIKE RESISTANT MATTING™

• Sales Tip: To minimize mat movement, be certain floor is free of dirt particles before laying mat.
• Where to Specify: Skating rinks, locker rooms, gymnasiums. Temporary or permanent placement over expensive carpet in heavy traffic areas.
• A durable vinyl linear ribbed top surface minimizes damage to floors from spikes skates.
• Overall thickness is 1/4 inch.

# 045 WEIGHT ROOM MATTING

• Sales Tip: The shear weight of the mats (130 pounds for the 3/4”) helps keep the mats in place.
• Where to Specify: Weight rooms, health clubs, gymnasiums.
• Indestructible rubber slab matting with textured top surface protects floors from weight lifting equipment.
• Overail thickness: Available in 1/2 inch or 3/4 inch
•  Not intended for wall-to-wall applications.

# 769 CLEAR TRAX™

• Sales Tip: Recommend for use only on looped pile carpeting
• Where to Specify: Temporary or permanent placement over expensive carpet in heavy traffic areas.
• Heavy duty clear PVC ribbed top runner protects carpeting from the debris of foot traffic.
• Mini-spiked underside clings to carpet to resist movement
• Overall thickness is 1/8 inch.

# 680 SAFETY TRAX™

• Sales Tip: Be certain that primary surface area is completely dry and clean before applying the "peel & stick" backing or the optional Sealing Compound.
• Where to Specify: Inclines, ramped walkways.
• Slip resistant pads are affixed to surfaces to increase friction providing a safer pathway.
• Top surface is embedded with silicon carbide particles. As the particles wear, they chip into continuously aggressive finer particles that continue to provide function.
• Pressure adhesive backing allows for easy "peel and stick" installation.
• An optional edge sealing compound is recommended for applications exposed to water, grease or oil.

# 950 Knee RX & # 951 Knee HX HD

• Sales Tip: Provides a comfortable work surface for those who are required to occasionally kneel while working. Eliminates the hassle and discomfort of wearing knee pads.
• Where to Specify: : Tool carts, Maintenance carts, Individual workstations
• Designed for comfort and durability in extreme kneeling applications
• For use on gravel, asphalt, concrete, dirty/oily surfaces, tile & wood flooring, metal grating, grass
• Nitrile/PVC foam blend for the highest degree of resistance to oils and greases
• Full 1" thick for the ultimate in comfort
• Durable laminated heavy-duty rubber bottom surface for additional comfort and long-lasting wear in rough environments (#951 Knee RX HD only)
• Self extinguishing, non-conductive, silicone free material
• Size: 12" x 22"
• Built-in handle easy to carry or hang up

# 825 CUSHION STAT™ with DYNA-SHIELD®

• Sales Tip: Ideal product for basic anti-fatigue and antistatic relief in an office or light-duty application.
• Where to Specify: Work station environment that requires anti-fatigue relief while working with delicate circuitry or components
• Dissipative / anti-static matting is formulated to absorb static electricity. This matting drains static from worker keeping sensitive circuitry from damage.
• Specially compounded pebble-embossed PVC sponge manufactured with NOTRAX® exclusive Dyna-Shield® protective top layer.
• All four sides are beveled to minimize trip hazards.
• Overall thickness is 3/8 inch.
• Testing is per EOS/ESD Association Draft Standard, "Standard for Protection of Electrostatic Discharge Susceptible Items = Worksurfaces" EOS/ESD-S4, Draft January 1988.
• RTG measured at Moderate and 12% RH, at 10V and 100V = 109 ohms.

# 826 DIAMOND STAT™

• Sales Tip: For maximum effectiveness, we highly recommend that the end-user properly attaches the grounding cord which is included at no charge. It easily snaps into a grommet which is installed in the mat at our factory.
• Where to Specify: Assembly or testing areas for circuitry: computers, chips, electronics of all kinds.
• Dissipative /anti-static matting is formulated to absorb static electricity. This matting drains static from worker keeping sensitive circuitry safe from damage.
• Durable vinyl diamond-plate top surface is combined with dense closed cell foam base utilizing NOTRAX® exclusive UniFusion™ technology.
• Provides excellent anti-fatigue support with a textured anti­slip surface
• Overall mat thickness is 9/16 inch.
• Sloped beveled foam on all 4 undersides affords easy access onto and off of mat.
• Custom widths available

# 830 SWITCHBOARD MATTING

• Sales Tip: We highly recommend that the mat be replaced every 12 months for optimum performance.
• Where to Specify: : In front of high voltage boxes, electrical fuse boxes, transformers.
• Insulative PVC matting is formulated to provide insulation to the worker from being grounded thus preventing electrical shock.
• Each square foot of this matting is tested in conformance with ANSI/ASTM D-178 specifications and meets or exceeds the following:

- Type 2 Compound: Polyvinyl Chloride
- Class 2 Di-electric Strength: 30,000 volts
- Proof test of 20,000 volts
- Recommended maximum usage of 17,000 volts.

# 831 DIAMOND SWITCHBOARD MATTlNG

• Sales Tip: We highly recommend that the mat be replaced every 12 months for optimum performance.
• Where to Specify: In front of high voltage boxes, electrical fuse boxes, transformers.
• Insulative PVC matting is formulated to provide insulation to the worker from being grounded thus preventing electrical shock.
• Each square foot of this matting is tested in conformance with ANSI/ASTM D-178 specifications and meets or exceeds the following:

- Type 2 Compound: Polyvinyl Chloride
- Class 2 Di-electric Strength: 30,000 volts
- Proof test of 20,000 volts
- Recommended maximum usage of 17,000 volts.