Safety and mobility - these are the hallmarks of North's Temporary Horizontal Lifeline (HLL) Systems. Whether rope or cable, these systems provide durable protection that can be moved from site to site where there are suitable approved anchor points. 100% portable and lightweight, these systems are ideal for the construction job site or bridge and building inspection activities.

Made with synthetic kernmantle rope, this is the lightest of North's horizontal lifelines. It spans up to 60 feet (18 m) for up to 2 people.

Part No

Description

FP1001

60' (18 m) of 5/8" (16mm) synthetic lifeline rope, 2 carabiners, 2 anchor slings, 1 rope tensioner, 1 lanyard (4 foot) with energy absorber and convenient carrying bag.

FP16ST/KH60

60' (18 m) horizontal lifeline, 5/8" (16 mm) hard lay polyester kern mantel rope, one termination and carabiner.

FP85

Carabiner connector, steel 1/4 turn twist lock, 5/8" (16 mm) opening.

FP02/6

PVC coated cable sling, 6' (1,8 m) long.

FP3521

Rope tensioner for 5/8" (16 mm) kern mantel rope.

FP22322/4

25 mm (1 ") nylon web lanyard with Soft Pack energy absorber, double locking ergonomic snap hook at both ends, 4 feet long.

FP1010

Large equipment carrying bag, ideal for lifeline kits.

The "SteelMan" Temporary Horizontal Lifelines provide a durable version of the rope lifeline. Galvanized steel cable resists additional wear and tear found in severe environments. This kit is ideally used in construction, the petrochemical industry and steel erection. It spands up to 60' (18 m) for up to 2 people.

Part No

Description

FP1002

Temporary HL Kit, comprising 60' (18m) of 3/8" (1 Omm) galvanized cable, 2 anchor slings, cable tensioner and cable clips, Soft Pak energy absorber, 2 carabiner connectors.

FP9380/60

Galvanized cable 3/8" (10 mm), 60 feet long.

FP03/6

Pass through anchor sling 2" (50 mm) nylon webbing, one small and one large "D" ring, 6 feet long.

FP9580

Cable tensioner.

FP9138

Cable clip.

FPD773

Carabiner connector, steel, 1/4 turn twist lock, 3/4" (19 mm) opening.

Part No

Description

FP3000

CanRest metallic energy absorber for lifeline limits anchor loads to 2800 lbs (13kN)

FP1800

Replacement Soft Pak tear web energy absorber with weather proof cover. Reduces loads on end anchor to below 1800 lbs. (8 kN).

FP1801

Replacement Soft Pak tear web energy absorber. Reduces loads on end anchor to below 1800 lbs. (8 kN).

FP9150

Optional split pulley for use on horizontal lifelines.