For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.
We accept VISA and Mastercharge.

LEATHER PROTECTORS

Leather Protector Gloves should always be worn over Rubber Insulating Gloves to provide the needed mechanical protection against cuts, abrasions and punctures. All SALISBURY protectors are steamed pressed on curved hand forms to insure proper fit over Rubber Gloves. Manufactured from top grade leathers, all are sewn with heavy duty nylon thread in the "Gunn Cut" inseam construction pattern. Protectors are dual sized with single sized marked protectors available by special order. Each protector is equipped with a non-metallic buckle on the pull strap as well as an extra wide leather reinforcement over the thumb seam. The 156 series protectors have a palm made from specially tanned Grade A Red Boulevard buffed leather and an orange colored SALCOR "Super Cuff" in the 4" and 6" cuff lengths. The "Super Cuff" is ozone resistant and provides the same characteristics as do leather cuffs but do not absorb moisture. Thus, lessening the chance of tracking. All 7" cuffs in the 156 series are a safety orange double coated neoprene fabric. The new 133 series was designed with economy in mind. The palm is a soft reversed pig with excellent flexibility. All cuffs are safety orange double coated neoprene fabric. For extra long life the 143 series palms are grain leather specially treated to repel oil and water. Cuffs are safety orange double coated neoprene fabric. Contact your local SALISBURY distributor or sales representative for information on special requirements leather protector gloves.

Cat. No. (Indicate Size)	Description	Overall Length (mm)	Use on Glove Class
133-4	Inside Seam 4" Cuff	12" (305)	1 thru 4
133-6	Inside Seam 6" Cuff	14" (356)	1 thru 4
143-4	Inside Seam 4" Cuff	12" (305)	1 thru 4
143-6	Inside Seam 6" Cuff	14" (356)	1 thru 4
143-7	Inside Seam 7" Cuff	15" (381)	1 thru 4
156-4	Inside Seam 4" Cuff	12" (305)	1 thru 4
156-6	Inside Seam 6" Cuffs	14" (356)	1 thru 4
156-7	Inside Seam 7" Contour Cuff	15" (381)	1 thru 4

Glove Class	Minimum Clearance From Top of Protector Cuff to Bead of Rubber Glove (mm)
00, 0, and 1	1" (25)
2	2" (51)
3	3" (76)
4	4" (102)

North Glove Protectors
Grain leather protectors. Gunn cut, rein-forced strip in thumb crotch, pull-tab, non-metallic strap buckle combination; palm portion of cuff is special leather, back side is Hi-Viz orange vinyl coated fabric. Same quality features are also available in Low Voltage Protectors except shirred elastic in place of strap and buckle (no gauntlet).

Cat. No.	Description	Length		Cat. No.	Description	Length
LP3S	Standard, Cowhide	12"		LPP7C	Contour, Pigskin	16"
LP4S	Standard, Cowhide	13"		LP10	Low Voltage, Cowhide	10"
LP5S	Standard, Cowhide	14"		LPP10	Low Voltage, Pigskin	10"
LP6S	Standard, Cowhide	15"		LPG3S	Standard, Goatskin	12"
LP7C	Contour, Cowhide	16"		LPG4S	Standard, Goatskin	13"
LPP3S	Standard, Pigskin	12"		LPG5S	Standard, Goatskin	14"
LPP4S	Standard, Pigskin	13"		LPG6S	Standard, Goatskin	15"
LPP5S	Standard, Pigskin	14"		LPG7C	Contour, Goatskin	16"
LPP6S	Standard, Pigskin	15"		LPG10	Low Voltage, Goatskin	10"

RUBBER INSULATING SLEEVES

Linemen working from insulated platforms or aerial devices, should be concerned with the possibility of accidental crossphase contacts as well as phase to ground contacts. Rubber Insulating Sleeves provide personal protection against this accidental brush contact with energized lines and equipment. All sleeves are manufactured in Style B, curved elbow design that follows the natural curvature of the arm. They are flexible and bend easily without bunching at the elbow. A halogenous finish further increases the comfort since surface friction is reduced between the sleeve and the arm. Voltage Class 1, 2, 3 and 4 are available in one piece molded Type I natural rubber. Type II, molded sleeves are available in Class 1 and 2 in either orange or black colored SALCOR ozone resistant elastomer. Dipped sleeves are available in Class 1, 2, 3, and 4, Type I natural rubber only. Molded sleeves are seamless and completely formed and vulcanized in one process using chromium plated molds. Small reinforcing beads at the wrist and arm openings give increased strength as well as additional comfort under the arm and at the wrist when inserted inside Rubber Insulting Gloves. Dipped sleeves are seamless and available in solid colors as well as two-color combination for those who like the easy inspection a contrasting color gives. A reinforced wrist band is standard giving the user additional comfort when worn inside rubber gloves. A hand folded bead provides added strength at the arm opening. A rolled bead may be provided at the wrist on special order. This design provides ample room for winter clothing. Every sleeve is visually inspected and electrically tested at its rated proof test voltage prior to packing. All SALISBURY Rubber insulated Sleeves are tested using water electrodes straight mounting. This test method puts the least stress on the sleeve during the ASTM D1051 water to water test. Rubber insulating sleeves may be branded with serial numbers or letters for a small charge. Always specify the numbering sequence when ordering.

Catalog Numbering System For Curved Arm Style Rubber Insulating Sleeves
2	R	OS
VOLTAGE RATING	SIZE	COLOR & MATERIAL
1 = Class 1 (10kV) 3 = Class 3(30 kV) 2 = Class 2 (20kV) 4 = Class 4 (40 kV)	R = Regular L = Large XL = X-Large (Dipped Sleeves-All Classes, Molded Sleeves, Class 2 Only) ADD Prefix "D" for DIPPED SLEEVES eg: 2 ROS Class 2, Regular size, Orange Color, SALCOR (MOLDED) D2RYB Class 2, Regular Size, Yellow/Black/Dipped.	B - Black Natural Rubber BS - Black Colored SALCOR OS - Orange Colored SALCOR YB - Yellow/Black Combination (Dipped Sleeve Only) Y - Yellow Natural Rubber M - Maroon Natural Rubber

North Linemen’s Sleeves - Straight Style
Natural rubber linemen’s sleeves are seamless, hand-dipped for flexibility. Meet ASTM requirements in four classes: 10 KV, 20KV, 30KV, 40KV

Cat. No.	Length	Class Number	Test Voltage	A.C. Maximum Use Voltage**
1RG	261/4"R	1	10KV	7,500
1LG	281/2"L	1	10KV	7,500
1XLG	30"XL	1	10KV	7,500
2RG	261/4"R	2	20KV	17,000
2LG	281/2"L	2	20KV	17,000
2XLG	30"XL	2	20KV	17,000
3RG	261/4"R	3	30KV	26,500
3LG	281/2"L	3	30KV	26,500
3XLG	30"XL	3	30KV	26,500
4RG	261/4"R	4	40KV	36,000
4LG	281/2"L	4	40KV	36,000
4XLG	30"X	4	40KV	36,000

*A.C. Maximum Use Voltage see ASTM Standard F-496-90 for complete definition.

North Sleeve Strap, Harness, and Buttons

Cat. No.	Description
SS1	Standard Sleeve Strap (2 required per pair of sleeves)
SH1	Sleeve Harness (1 required per pair of sleeves)
SB1	One piece button (4 required per pair of sleeves)
SB4	Orange vinyl screw type button (4 required per pair of sleeves)

WSP home	Suppliers	Products
North Products	Oberon Electrical