MSA Fall Protection 11

For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.

Credit Card Images

Permanent Horizontal Lifelines

Horizon™ Horizontal Lifeline
The MSA Horizon Horizontal Lifeline anchorage connecting system is designed for portability, versatility, ease of installation and ease of use. The system may be mounted to existing overhead steel beams or to newly constructed steel structure where overhead anchorage points are not available. Horizontal travel through intermediate supports is achieved without disconnection of the worker's personal fall arrest system. The system may accommodate up to five persons. The unique shock absorber reduces dynamic forces transmitted to the anchorage points. Stanchion systems may be installed on the top or bottom flange of an I-beam. Typical applications include new construction (steel erection), inspection and maintenance operations, loading bays, bridges, overpasses, aircraft hangers, manufacturing, petrochemical, chemical and food processing plants. Meets OSHA requirements
Horizontal Lifeline Ordering Information
Part No. Description
506682 Beamgrip for beams with flange width: 3.94" to 5.64" flange thickness: .215" to .622"
415171 as above, flange width: 505" to 8.0" flange thickness: .44" to .56"
415172 as above, flange width: 8.06" to 10.475" flange thickness: .66" to .76"
415173 as above, flange width: 10.265" to 12.8" flange thickness: .58" to .99"
415836 Horizontal lifeline shock absorber
506563 3/8" open wedge socket
506636 Beamgrip bypass fitting
506637 Beamgrip end fitting
506648 3/8" wire rope, 30 ft. galvanized
506662 12" turn buckle with plate
506663 Snatch block pulley for 3/8" wire rope
506254 as above, for 1/2" wire rope
506255 as above, for 5/8" wire rope

Basic Stanchion Mount Sub-System
Parts required for this system: 5 Beamgrips (part no. depends on size of beam flange)
2 - 506646; 1 - 506647; 1 - 506648 (30'); 1 - 506645; 1 - 415836; 2 - 506665; 1 - 506649
Horizontal Lifeline Ordering Information
Part No. Description
506682 Beamgrip for beams with flange width: 3.94" to 5.64" flange thickness: .215" to .622"
415171 as above, flange width: 5.5" to 8.0" flange thickness: .44" to .56"
415172 as above, flange width: 8.06" to 10.475" flange thickness: .66" to .76"
415173 as above, flange width: 10.265" to 12.8" flange thickness: .85" to .99"
415836 Horizontal lifeline shock absorber
506645 Cable Clamp
506646 Beamgrip end stanchion
506647 Beamgrip bypass stanchion
506648 3/8" wire rope, 30', galvanized
506649 Wire rope clip, 3/8"
506663 Snatch block pulley for 3/8" wire rope
506254 as above, for 1/2" wire rope
506255 as above, for 5/8" wire rope
506665 Beamgrip stanchion insert

Below Beam HLL Kits
30 ft. Kits Include 60 ft. Kits Include
2 beamgrips (choose from P/N 415171 or P/N 415172) 3 beamgrips (choose from P/N 415171 or P/N 415172)
2 end fittings (P/N 506637) 2 end fittings (P/N 506637)
Shock absorber (P/N 415836) Shock absorber (P/N 415836)
Lifeline (P/N 506648 - 30 ft.) Lifeline (P/N 506648 - 60 ft.)
Open wedge socket (P/N 506563) Open wedge socket (P/N 506563)
Turnbuckle (P/N 506662) Turnbuckle (P/N 506662)
  Manual bypass (P/N 506636)

Stanchion HLL Kits
30 ft. Kits Include 60 ft. Kits Include
4 beamgrips (choose from P/N 415171 or P/N 415172) 5 beamgrips (choose from P/N 415171 or P/N 415172)
2 end stanchions (P/N 506646) 2 end stanchions (P/N 506646)
2 stanchion inserts (P/N 506665) 2 stanchion inserts (P/N 506665)
Lifeline (P/N 506648 - 30 ft.) Lifeline (P/N 506648 - 60 ft.)
Wire rope clip (P/N 506649) Wire rope clip (P/N 506649)
Cable Clamp (P/N 506645) Cable Clamp (P/N 506645)
Shock absorber with turnbuckle (P/N 415836) Shock absorber with turnbuckle (P/N 415836)
  Intermediate stanchion with Manual Bypass
(P/N 506647)

Component Parts for HLL Kits

Open Wedge Socket
ByPass

HLL Shock absorber with turnbuckle
End Fitting

Turnbuckle with plate
Stanchion
Insert
   

Horizontal Lifeline Kits Ordering Information
For Below Beam and Stanchion Mount Sub-System
Part No. Description
10030270 HLL Kit #1 30' Below Beam system for I-beams with flange width 5.5" - 8" and flange thickness .44" - .56"
10030271 HLL Kit #2 60' Below Beam system for I-beams with flange width 5.5" - 8" and flange thickness .44" - .56"
10030272 HLL Kit #3 30' Below Beam system for I-beams with flange width 8.06" - 10.475" and flange thickness .66" - .76"
10030273 HLL Kit #4 60' Below Beam system for I-beams with flange width 8.06" - 10.475" and flange thickness .66" - .76"
10030274 HLL Kit #5 30' Stanchion system for I-beams with flange width 5.5" - 8" and flange thickness .44" - .56"
10030275 HLL Kit #6 60' Stanchion system for I-beams with flange width 5.5" - 8" and flange thickness .44" - .56"
10030276 HLL Kit #7 30' Stanchion system for I-beams with flange width 8.06" - 10.475" and flange thickness .66" - .76"
10030277 HLL Kit #8 60' Stanchion system for I-beams with flange width 8.06" - 10.475" and flange thickness .66" - .76"

MSA HLL Anchorage Bracket

HLL quickly connects to
Stanchion
Jaw clamp screw easily
attaches to I-beam flange
HLL Stanchion for
horizontal lifeline
Part No. SHLAR-D6

SHLAR-D6SHIM used in conjuction with SHLAR-D6 Stanchion only when the
distance (d) from the beam web to the end of the flange is less than3.625"

SHLAR-E4 Bridge rail tie bracket shown with SHLAR-D6 Stanchion

MSA Anchorage Bracket Ordering Information
Part No. Description
SHLAR-D6 Stanchion A-frame design, galvanized steel
SHLAR-E4 Bridge Rail Tie Bracket (includes 4 SHLAR-TB14 T-Bolts)
SHLAR-TB14 Replacement T-Bolt (14") for SHLAR-E4 Bracket
SHLAR-D6SHIM Anchorage Bracket shim (for beam flange widths less than 3.625"

Horizon Rebar Anchorage
The Horizon Rebar Anchorage provides a secure horizontal lifeline attachment to rebar. Additional Horizon Rebar Anchorage features include:
  • Quick and easy set up
  • No special tools required for installation
  • Sturdy tubular steel construction
  • One rebar anchorage can support a horizontal lifeline in 2 directions
  • Can be used in conjuction with multiiple lifelines to create a perimeter for leading edge work
  • Fits most common rebar sizes
  • Easy to use J-bolt fasteners with speed nuts for secure attachment to rebar
  • Supports up to 4 workers per system with in-line shock absorber, maximum of two workers per span
  • Meets applicable OSHA and ANSI standards

Horizon Rebar Anchorage Illustrations

Horizon Rebar Anchorage Ordering Information
Part No. Description
10018424 Horizon Rebar Anchorage (includes 2 frames, 8 J-bolts, 8 speed nuts, and hardware to fasten frames)
10018425 J-bot replacement kit (includes 4 J-bolts and 4 speed nuts)
10018925 Intermediate support for rebar anchorage (1 double clevis) Note: this part number must be ordered in conjunction with 10018424 for a complete intermediate support bracket
10020164 Installation and use of Horizon Rebar Anchorage video
506563 Open wedge socket
506662 Turnbuckle with plate
415836 HLL shock absorber with turnbuckle
506648 3/8" galvanized wire rope lifeline (30 ft. length) (add $1.50 per foot for length over 30 ft)

Sure-Rail™ Horizontal Lifeline
The Sure-Rail system is a rigid rail horizontal lifeline system typically used in areas where there is limited clearance below the working surface. The system consists of galvanized steel 1/2" X 2" X 10' rail sections, a rail trolley, end stops and various mounting hardware. The rails are anchored to a supporting structure, while the trolley provides a mobile connection point for the user. The rail sections are affexed to an approved anchorage at 5 ft. intervals. End stops prevent accidental detachment of the trolley from the rail.
The Sure-Rail system is available in many standard configurations, but can also be customized to fit your application. For example, a swing arm option can be installed that allows the system to retract against a wall when not in use with the assistance of pneumatic cylinders (Possible interference that would require this option would be an overhead crane moving in a perpendicular direction to the fall protection system).
In addition, the Sure-Rail system provides:
  • Ease of movement (smooth trolley action)
  • Little or no deflection in the rail limits fall distance and fall arrest forces on the body
  • Design that allows for even distribution of fall arrest forces to the structure
  • Twin track configuration that allows users to bypass each other without having to disconnect and re-connect
  • Spring loaded end stops for easy insertion / removal of the trolley
  • Aluminum trolley with stainless steel wheels
  • Bent rails available for travel around corners


Sure-Rail Trolley


Sure-Rail Horizontal Lifeline Usage Illustration

Sure-Rail Horizontal Lifeline Ordering Information
Part No. Description
SHLSR-001-04 Sure-Rail Trolley, Heavy Duty (Required for retractable lifelines)
SHLSR-002-10-00 Sure-Rail, galvanized, pre drilled, 1/2" X 2" X 10 ft (12mm X 50mm X 3 m)
SHLSR-005-01 Sure-Rail Splice, galvanized with bars and hardware (required every 10 ft)
SHLSR-006-01 Sure-Rail Spacer galvanized (required every 5 ft)
SHLSR-007-03 Sure-Rail Anchorage Bolt galvanized (required every 5 ft)
SHLSR-008-01 Sure-Rail Anti-Slip Off Collar, steel, painted (required at both ends of system)
10030601 Sure-Rail Truck / RailCar Loading Kit, 60 ft
10030602 Sure-Rail Truck / RailCar Loading Kit, 80 ft

Sure-Rail 60' Kit P/N 10030601 - 60' Single Track
Qty Product (Part No.) Qty Product (Part No.)
6 1/2" x 2" rail (SHLSR-002-10-00) 2 Anti-Slip off collars (SHLSR-008-01)
6 Splice joining hardware (SHLSR-005-01) 1 Sure-Rail Trolley (SHLSR-001-04)
12 Spacers (SHLSR-006-01) 1 Carabiner (SRCC643)
12 Standard Anchorage Bolts (SHLSR-007-03)    

Sure-Rail 60' Kit P/N 10030602 - 80' Single Track
Qty Product (Part No.) Qty Product (Part No.)
8 1/2" x 2" rail (SHLSR-002-10-00) 2 Anti-Slip off collars (SHLSR-008-01)
8 Splice joining hardware (SHLSR-005-01) 1 Sure-Rail Trolley (SHLSR-001-04)
16 Spacers (SHLSR-006-01) 1 Carabiner (SRCC643)
16 Standard Anchorage Bolts (SHLSR-007-03)    

Saferidge™ System
The patented SafeRidge system is designed to provide fall protection on sloped roofs. This unique product combines a fall protection system with the waterproof and venting characteristics of a traditional roof ridge section. Its low profile and unobtrusive appearance can accommodate a wide variety of roof profiles. Advantages of the SafeRidge system are:
  • Can be installed on new or existing buildings
  • Installs quickly and easily
  • Can be installed by your personnel
  • Fastened from the top down - no need to enter building for installation
  • No penetration of insulation within the roof
  • Cost-effective - provides a safety system and apex weather proofing in one product
  • Offered in a range of colors to match or accent the color of the roof
  • Aluminum and stainless steel mobile eyebolt for connection of fall protection system
  • Accommodates up to 3 people per system
  • Optional vented SafeRidge rail available

WSP home Products Suppliers  
Fall Protection MSA Index Previous MSA Page Next MSA Page