For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.
| SCBA | Facepiece | Cylinder | EBS | PASS/Redundant Alarm | Carrier & Harness | Part No. |
| Ultralite MMR | Ultra Elite Medium | 30 min. Stealth | - | Dragonfly IP w/ heat sensor | Vulcan | 10018584 |
| Ultralite MMR | Ultra Elite Medium | 30 min. Stealth | Quick-Fill | Dragonfly IP w/ heat sensor | Vulcan | 10018585 |
| Ultralite MMR | Ultra Elite Medium | 30 min. Stealth | - | ICM 2000 w/ heat sensor | Vulcan | 10024214 |
| Ultralite MMR | Ultra Elite Medium | 30 min. Stealth | - | ICM 2000 Plus w/ heat sensor | Vulcan | 10024215 |
| Custom 4500 MMR | Ultra Elite Medium | 30 min. Stealth | - | Dragonfly IP w/ heat sensor | Vulcan | 10018586 |
| Custom 4500 MMR | Ultra Elite Medium | 30 min. Stealth | Quick-Fill | Dragonfly IP w/ heat sensor | Vulcan | 10018587 |
| Custom 4500 MMR | Ultra Elite Medium | 30 min. Stealth | - | ICM 2000 w/ heat sensor | Vulcan | 10024216 |
| Custom 4500 MMR | Ultra Elite Medium | 30 min. Stealth | - | ICM 2000 Plus w/ heat sensor | Vulcan | 10024217 |
| Custom 4500 MMR | Ultra Elite Medium | 30 min. Stealth | Quick-Fill | ICM 2000 Plus w/ heat sensor | Vulcan | 10024218 |
| SCBA | Facepiece | Cylinder | Head Harness | Case | Part No. |
| WorkMask MMR 2216 | Ultra Elite Medium | Aluminum | - | 10018488 | - |
| WorkMask MMR 2216 | Ultra Elite Medium | 30 min. Fiberglass | EZ-Don | - | 10018487 |
| WorkMask II MMR 2216 | Ultra Elite Medium | Aluminum | - | 10024219 | - |
| WorkMask II MMR 2216 | Ultra Elite Medium | Aluminum | yes | 10024270 | - |
![]() |
The patented Quick-Fill system lets MSA Air Mask users refill and trans-fill air cylinders while the SCBA is worn, without removing the air cylinder, even in IDLH atmospheres. Use this MSA exclusive option to:
Because performance is not affected, MSA air masks retain NIOSH certification during use of the Quick-Fill System. It is available on Ultralite II and MMR and Custom 4500 II and MMR air masks, including dual purpose models The Quick-Fill system uses a special adapter assembly. On belt mounted units, it's located on the regulator, while MMR units have a junction block and fitting installed on the gauge line. A Quick-Fill hose with a quick disconnect connects the air source to the adaper for air transfers. |
| Description | Part No. |
| Ultralite MMR Quick-Fill Kit (shoulder) for units purchased after 12/98 | 10020382 |
| Custom 4500 MMR Quick-Fill Kit (shoulder) for unit purchased after 12/98 | 10020383 |
| Quick-Fill adapter block only for shoulder mounted units purchased after 12/98 | 10020515 |
| Ultralite MMR Quick-Fill Kit (shoulder) for units purchased before 12/98 | 495172 |
| Custom 4500 MMR Quick-Fill Kit (shoulder) for units purchased before 12/98 | 495173 |
| Quick-Fill male adapter assembly for Ultralite II | 485417 |
| Quick-Fill male adapter assembly for Custom 4500 II | 485416 |
| Quick-Fill Kit for ICM, Ultralite | 10020382 |
| Quick-Fill Kit for ICM, Custom 4500 | 10020383 |
| Quick-Fill adapter only for ICM (less coupling) | 10020515 |
| Replacement Parts for the Quick-Fill System | |
| EBS hose package, includes 3 foot emergency transfill hose in kevlar pouch | 485366 |
| Emergency transfill hose, less kevlar pouch | 485331 |
| Kevlar pouch | 485390 |
| Male stainless steel quick-disconnect with SAE-10 thread, complete with dust cover (also for use as a fitting for customized refilling systems) | 485391 |
| Female quick-disconnect with SAE-4 thread, complete with dust cover | 485392 |
| 25 ft. lengths are stocked, other "custom lengths" are available upon a special material basis. All SAE fittings are for high pressure service. Female quick-disconnect fittings have dust covers. | ||||||
| Item | 25 ft. | 12 ft. | 10 ft. | 8 ft. | 6 ft. | 3 ft. |
| FQD X FQD | 485332 | 802690 | 802689 | 802688 | 802687 | 485331 |
| FQD X CGA-347 Outlet | 487907 | 802677 | 802675 | 802673 | 802671 | 492796 |
| FQD X CGA-347 CN | 487909 | 802685 | 802683 | 802681 | 802679 | 487427 |
| FQD X SAE-4 | 487906 | 802704 | 802703 | 802702 | 802701 | 802705K |
| FQD X CGA-346 Outlet | 487908 | 802678 | 802676 | 802674 | 802672 | 492797 |
| FQD X CGA-346 CN | 487910 | 802686 | 802684 | 802682 | 802680 | 487428 |
| Description | Part No. |
| Audi-Larm Assembly for Ultralite MMR Air Mask with Vulcan carrier | 10012995 |
| Audi-Larm Assembly for Ultralite MMR Air Mask with Black Rhino carrier | 488897 |
| Audi-Larm Assembly for Custom 4500 MMR Air Mask with Vulcan carrier | 10012996 |
| Audi-Larm Assembly for Custom 4500 MMR Air Mask with Black Rhino carrier | 485851 |
| Audi-Larm Assembly for Ultralite II BMR Air Mask with shoulder gauge line | 10013338 |
| Audi-Larm Assembly for Ultralite II BMR Air Mask less shoulder gauge line | 807494 |
| Audi-Larm Assembly for Custom 4500 II BMR Air Mask with shoulder gauge line | 10013339 |
| Audi-Larm Assembly for Custom 4500 II BMR Air Mask less shoulder gauge line | 807492 |
| Description | Part No. |
| PBI Neck Strap | 801156 |
| Breathing Tube Assembly | 801165 |
| DIN Thread Breathing Tube | 803506 |
| Wire-reinforced Breathing Tube | 803433 |
![]() |
This storage unit can be mounted with screws on rescue or fire vehicles or any permanent surface. The spring clips permit the wearer to strap on the apparatus unassisted. By stepping forward, the wearer steps out of the bracket. |
| Walkaway Mounting Bracket for Ultralite MMR or Custom 4500 II or Custom 4500 MMR Air Masks with 30 minute cylinder | |
| Part No. | 39851 |
| Corrosion resistant, tough plastic case has a leakproof synthetic rubber bulb seal gasket. It protects breathing apparatus from sunlight, weather, dust and corrosive atmospheres. | ![]() |
| Wall mounted case for Ultralite II and Ultralite MMR, 30 minute cylinder | 695308 |
| Wall mounted case for Custom 4500 II and Custom 4500 MMR, 30 minute cylinder | 695796 |
| Wall mounted case for Custom 4500 II and Custom 4500 MMR, 60 minute cylinder | 695797 |
| Provides a convenient means to connect and charge high pressure air into a high pressure 4500 psig cylinder | ![]() |
| High Pressure Filling Hose Assembly | 476105 |
![]() |
|
| Air Outlet Connection, complete with Gauge | 68846 |
| Air Coupler Tee | 68850 |
| Air Pigtail | 68851 |
| Low Pressure Air Filling Hose, 5 feet long | 476156 |
![]() |
|
| The RescueAire Portable Air Supply System is an emergency breathing system for use by Rapid Intervention Teams (RITs). This system consists of a 60 minute lightweight Stealth carbon cylinder with Quick-Fill® emergency breathing system supported by a flame and heat resistant carrying harness (made from Nomex and Kevlar materials). An optional use shoulder strap is provided for hands free carrying | |
| RescueAire Portable Air Supply System | 10020934 |
![]() |
![]() |
| ICM 2000 & ICM 2000 Plus | Dragonfly PASS |
| The ICM 2000 and ICM 2000 Plus are integrated Computer modules designed to meet the new NFPA-1982, 1998 Edition PASS standard and NFPA-1981, 1997 Edition SCBA requirements for redundant End-of-Service Time indicators (EOST).
The ICM 2000 is an all in one combination PASS and redundant alarm module that can be added to any MSA MMR or BMR SCBA. Simply remove the shoulder mounted pressure gauge and replace it with the ICM module. The ICM 2000 Plus is an all in one combination PASS and redundant alarm with a built in computer system that digitally displays SCBA performance information. The ICM 2000 Plus also offers a data logging and data downloading capability to retrieve up to 30 hours of SCBA usage information. The data provides information about the time of use, air consumption rate, ambient temperature and alarm activation. Through the device's IR (Infrared) port, the data can be downloaded to a personal computer for future evaluation. |
The Dragonfly PASS from MSA was among the first PASS devices designed to meet the stringent NFPA-1982, 1998 Edition standard.
This standard calls for automatic (hands off) activation of stand alone PASS devices as well as two jumps in pre-alarm volume. The Dragonfly PASS exceeds the standard by offering a range of pre-alarm volumes and tones to help users avoid unnecessary progression to full alarm. Super bright LED indicators provide visual indicators: green indicates normal operation; red "wig-wag" indicates pre-alarm; and continuous red indicate full alarm. In addtion, an easily accessible activation button allows users to summon help manually. Integrated directly into your SCBA, the low profile Dragonfly IP PASS automatically activates when your MSA Air Mask's cylinder is opened. Because the pressure switch and all electronics are housed within the PASS, assembly is as easy as changing a pressure gauge. Note: for BMR SCBA manufactured before September 1999, an Audi-Larm, shoulder pads, and shoulder mounted gauge line must be purchased. The stand alone Dragonfly PASS features a tethered key designed to be attached to your jump seat, locker or vehicle interior. Whe you jump to action, the key snaps off, and your Dragonfly SA PASS activates and is on guard, monitoring your every move. Once the job is complete, you can turn off your stand alone PASS simply by replacing the key and pressing reset twice. |
| At the request of firefighters nationwide, the NFPA requires two low pressure warning indicators for SCBA to comply with NFPA-1981, 1997 Edition. The redundant low-pressure warning requirements was effective in September 1999.
When you open your Air Mask's cylinder valve, the Redundant Alarm activates, displaying pressure readings through an analog gauge. The Redundant Alarm is low profile and easily accessible, because it is built into your Air Mask and conveniently positioned at chest level. Should cylinder pressure levels decrease to 1100 psig on high pressure Air Masks or 540 psig on low pressure, both audible and visual indicators activate. Alternately flashing red and amber LEDs, a flashing electroluminescent backlight and piercing 85 decibel bursts of sound continuously warn of low pressure levels. Note: for BMR SCBA manufactured prior to September 1999, an Audi-Larm assembly, shoulder pads, and shoulder mounted gauge line must be purchased. |
| ICM 2000 Plus | |||||
| MMR SCBA | Thermistor | Part No. | BMR SCBA | Thermistor | Part No. |
| Custom 4500 | inactivated | 10019875 | Custom 4500 II | inactivated | 10019879 |
| Custom 4500 | activated | 10019876 | Custom 4500 II | activated | 10019880 |
| Ultralite | inactivated | 10019877 | Ultralite II | inactivated | 10019881 |
| Ultralite | activated | 10019878 | Ultralite II | activated | 10019882 |
| ICM 2000 | |||||
| Custom 4500 | without | 10019857 | Custom 4500 II | without | 10019871 |
| Custom 4500 | with | 10019858 | Custom 4500 II | with | 10019872 |
| Ultralite | without | 10019859 | Ultralite II | without | 10019873 |
| Ultralite | with | 10019870 | Ultralite II | with | 10019874 |
| ICM 2000 Plus Kit | |||||
| ICM 2000 Plus Kit, includes software and jeteye reader | 10020979 | ||||
| Dragonfly PASS Units | |
| Dragonfly IP PASS, with heat sensor | 10005048 |
| Dragonfly IP PASS without heat sensor | 10005049 |
| Dragonfly SA PASS with heat sensor | 10005071 |
| Dragonfly SA PASS without heat sensor | 10005072 |
| Replacement key for SA (10 pack) | 10013073 |
| Replacement REHAB Key (10 pack) | 10013072 |
| Replacement key (less tether) 1 per | 10018830 |
| Redundant Alarm Kits | |
| For MMR 2216 / 3000 psig Air Mask | 10009770 |
| For MMR 4500 psig Air Mask | 10009771 |
| For Ultralite II BMR Air Mask | 10013249 |
| For Custom 4500 BMR Air Mask | 10013300 |
| Rubber Gauge Line Tether | 10016029 |
| WSP home | Products | Suppliers |
| MSA index page | Previous MSA page | Next MSA page |