For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.
 |
 |
| MSA offers Duo-Flo Respirators in both Constant Flow and Pressure Demand versions. Constant Flow respirators are normally used where an ample air supply is available, such as that provided by an air compressor. Pressure-Demand respirators are generally used where only compressed air cylinders are available. Duo-Flo Respirators feature air purifying canisters to protect against a wide variety of contaminants.
Duo-Flo Respirators are popular in the pharmaceutical, chemical, petrochemical and nuclear industries. The unique D / DP switchable exhalation valve, standard on Pressure Demand respirators, also makes these units especially well suited for abatement work. This MSA respirator should not be used in atmospheres containing less than 19.5% oxygen. NIOSH / MSHA approved and certified. |
|
| Cartridges must be ordered separately | |
| Constant flow Duo-Flo respirator with full facepiece Ultravue Facepiece | 466095 |
| Constant flow Duo-Flo respirator with half mask Comfo Facepiece | 466097 |
| Pressure Demand Duo-Flo respirator | 484378 |
|
|
|
| Complete Air Line Adapter Assemblies
Designed to deliver the requested air flow to the facepieces at an inlet pressure range of 35 - 40 psig for hose lengths of 8 to 300 feet. The adapters include an integral belt clip and male and female quick disconnect assemblies. |
|
| Snap Tite Aluminum assembly | 466077 |
| Snap Tite Brass assembly | 476919 |
| Snap Tite Stainless Steel assembly | 476920 |
| Foster Steel assembly | 469869 |
| Foster Brass assembly | 476918 |
| Hansen Brass assembly | 476922 |
| Hansen Stainless Steel assembly | 476921 |
| Duff-Norton assembly | 476923 |
| CEJN Locking assembly | 479114 |
| Snap Tite Locking Aluminum assembly | 479115 |
| Regulator Assemblies
The Pressure-Demand regulator maintains air flow at a minimum of 1.0 inches of water positive pressure to the facepiece. Flow stops during exhalation when the Pressure-Demand valve opens at approximately 1.5 inches of water positive pressure. The regulator has an integral belt clip which can be easily adjusted along the support belt for comfortable positioning. |
|
| Snap Tite Aluminum assembly | 481934 |
| Snap Tite Brass assembly | 481937 |
| Snap Tite Stainless Steel assembly | 481938 |
| Foster Steel assembly | 481935 |
| Foster Brass assembly | 481936 |
| Hansen Brass assembly | 481940 |
| Hansen Stainless Steel assembly | 481939 |
| Duff-Norton assembly | 481941 |
| CEJN Locking assembly | 481943 |
| Snap Tie Locking Aluminum assembly | 481944 |
 |
| The Abrasi-Blast Respirator provides respiratory and upper body protection to workers in shipbuilding, the construction industry, utilities and other applications where blasting with abrasives is performed
A complete Abrasi-Blast Respirator is made up of a hood, facepiece with lens housing, breathing tube, cover lens cartridge assembly, flow control device, approved air supply hose and support belt. During blasting operations, the lens of the Abrasi-Blast Respirator is protected by 2 to 4 flat glass cover lenses mounted in a special foam material. Each cover lens is removed by integral pull tabs when it become so abraded that vision is reduced. Ther is no need to stop and change lenses, as is necessary with most conventional blasting hoods. NIOSH and MSHA approved. |
| Complete Assemblies
Includes one lens cartridge consisting of four 0.06 inch untempered glass cover lenses, flow control device, Snap Tite aluminum quick disconnect fitting, adjustable valve connector body, or pressure-demand regulator (with socket assembly), facepiece (medium) with dual exhalation valves and lens housing, breathing tube, web belt, and air hose connector. |
||
| Inlet Pressure Range | Cover | Part No. |
| 10 - 15 psi | Waist lenth hood with collar | 468716 |
| Shoulder length hood with collar | 468720 | |
| 35 - 40 psi | Waist lenth hood with collar | 468718 |
| Shoulder length hood with collar | 468722 | |
| 60 - 80 psi (Vortex Tube) | Waist lenth hood with collar | 474263 |
| Shoulder length hood with collar | 474264 | |
| Pressure-Demand | Waist lenth hood with collar | 485751 |
| Shoulder length hood with collar | 485755 | |
| Lens Cartridges | ||
| Description | Recommeded Use | Part No. |
| 0.06 in. thick untempered lens (4 lenses in each cartridge) |
light blasting | 473238 |
| 0.06 in. thick tempered lens (4 lenses in each cartridge) |
light blasting plus added protection against glass breakage | 473240 |
| 0.09 in. thick untempered lens (3 lenses in each cartridge) |
medium blasting | 473798 |
| 0.09 in. thick tempered lens (3 lenses in each cartridge) |
medium blasting plus added protection against glass breakage | 473800 |
| 0.12 in. thick untempered lens (two layers laminated) (2 lenses in each cartridge) |
heavy blasting | 473802 |
| 0.12 in. thick untempered lens (two layers laminated) (3 lenses in each cartridge) |
heavy blasting | 481742 |
 |
| This hood can be used anywhere a Type C air supplied hood is required. It is available in Tyvek material in both shoulder length and waist length styles. Either style can be equipped for use with a plant air source or MSA's CompressAire Personal Air Compressor. When head protection is needed, a special three-point Velcro system secures the hood to an MSA V-Gard Cap. The hood suspension (basic or ratchet versions) are easily adjustable and stable, minimizing the need for a chin strap. The hood is designed to be disposable, thus eliminating the need for cleaning, and a twin lens system extends the life of the hood. An air distribution system keeps the lens fog free. NIOSH / MSHA certified. |
| CompressAire 1/2 hp compressor assembly from MSA | 484828 |
| 25 ft. Neoprene 1/2" air supply hose | 483809 |
| 50 ft. Neoprene 1/2" air supply hose | 483810 |
| 100 ft. Neoprene 1/2" air supply hose | 483811 |
| Snap Tite socket for 1/2" hose system (female with union adapter) | 484236 |
| Complete Hood Assembly includes: Tyvek Hood (shoulder length) with male Snap Tite connector | 484769 |
| Replacement Parts for CompressAire Compressors | |
| Replacement outlet filter kit | 484923 |
| Replacement inlet filter | 695929 |
| CompressAire 1/2 hp Compressor Assembly | 484828 |
| Hood Assembly Components | |
| Male Snap Tite plug for 1/2 in. hose | 633539 |
| Hood hose 3/8 inch NPT | 483606 |
| Shoulder length Tyvek hood | 482612 |
| Waist length Tyvek hood | 482610 |
| Belt holder | 483623 |
| PVC support belt | 473902 |
| Additional Options / Additional Replacement Parts | |
| Special V-Gard slotted cap, small | 482646 |
| Special V-Gard slotted cap, standard | 482647 |
| Optional chinstrap, elastic (for use with cap) | 484319 |
| Optional chinstrap, cotton webbing (for use with cap) | 484320 |
| Basic hood suspension | 482614 |
| Pkg of 10 individual Cover Lenses | 491600 |
| Air-supply hose cover (200 ft. roll) | 696014 |
 |
|
| The Synergy Bubble Hood is a low cost, lightweight Type C supplied air respirator designed to provide respiratory protection in toxic atmospheres not immediately dangerous to life and health (non-IDLH). Designed for convenience and cost efficiency, the Synergy Bubble Hood differs from many comparable devices in that it can be used with a common air supply hose that is compatible with other MSA supplied air respirators.
Whether users require a pressure-demand respirator, a dual purpose self contained breathing apparatus (SCBA), a constant flow air line respirator, or the Synergy Bubble Hood respirator, one air supply hose is suitable for all applications. The optional Communications Port, positioned on the lower portion of the hood, allows integration with two way radio headsets. The communications port consists of a PVC "sleeve" that allows connection of radio cables to the headset. Once a cable is installed, the port can be sealed off from outside contamination using tape. |
|
| Complete Hood Assembly, standard size, yellow bib, Foster steel quick disconnect | 805683 |
 |
| Synergy Welder's Hood Respirators are low cost, lightweight Type C supplied air devices designed to provide respiratory and upper body protection in toxic atmospheres not immediately dangerous to life and health (non-IDLH). The hoods are loose fitting, allowing wearers to move freely and work in comfort.
Designed for convenience and cost efficiency, Synergy Welder's Hood Respirators differ from many comparable devices in that they can be used with a common air supply hose that is compatible with other MSA supplied air respirators. |
| Complete Assemblies | |
| Sitegard® heat treated welding glass | |
| Welding plates, shade 5 | 791923 |
| Welding plates, shade 10 | 791928 |
| Welding plates, shade 12 | 791930 |
| Welding plates, shade 14 | 791932 |
| WARNING!!!
Welding plates do not provide unlimited face and eye protection. Suitable impact resistant primary eye protection, as required by ANSI Z87.1-1989 must be worn at all times when using any welding shield. Pitted and scratched facepiece reduce most vision and impact protection, and must be replaced immediately. Clean only with mild soap and lukewarm water. Do not use solvents!!! |
|
| WSP home | Products | Suppliers |
| MSA index page | Previous MSA page | Next MSA page |