V-Gard® Protective Hats and Caps

Classification:

Type 1

Application

General Purpose

Shell Material:

Polyethylene

Available Styles:

Slotted Cap; Non-Slotted Full Brim Hat

Sizes:

Small (6 - 7-1/8"); Standard (6-1/2 - 8"); Large (7-1/2- 8-1/2")

Standards:

ANSI/ISEA Z89.1-2009 (Class E); CSA Z94.1-200S (Class E)

Certification:

Third-party by SEI

Customization:

Imprinting and striping available

NOTE: Small and Large V-Gard Caps are NOT CSA-certified. Standard-size V-Gard Caps and Hats are CSA-certified when assembled with MSA's Fas-Trac or 1-Touch Suspension ONLY.

V-Gard Complete Assemblies

Standard V-Gard Slotted Cap

Large V-Gard Slotted Cap

V-Gard Hat Non-Slotted

Color

w/Staz-On
Suspension

w/1-Touch
Suspension"

w/Fas-Trac
Suspension"

w/Staz-On
Suspension

w/Fas-Trac
Suspension

w/Staz-On
Suspension

w/1-Touch
Suspension"

w/Fas-trac
Suspension'

White

463942

10057441

475358

473284

477482

454733

10058321

475369

Blue

463943

10057442

475359

476928

477483

454732

10058320

475368

Yellow

463944

10057443

475360

473285

477484

454730

10058318

475366

Orange

463945

10057444

475361

•

See Note

454734

10058322

496075

Red

463947

10057446

475363

•

454736

10058324

475371

Green

463946

10057445

475362

•

•

454735

10058323

475370

Gray (navy)

463948

10057447

475364

•

454731

10058319

475367

Hi-Viz" Orange**

488148

10057420

488146

•

489364

489360

10058326

10021292

Hi-Viz Yellow-Green**

•

10061514

10061512

•

•

•

10061516

10061515

Bright Lime Green

815558

•

815565

•

•

815562

•

815570

Special V-Gard Assemblies

Hi-Viz Orange wlYellow-Green Stripe**

•

10102195

10102193

•

•

•

•

•

Hi-Viz Yellow-Green wiRed-Orange Stripe**

•

10102234

10102233

•

•

•

•

•

Hi-Viz Yellow-Green w/Silver Stripe**

•

10102196

10102194

•

•

•

•

•

White, w/Lamp Bracket & Cord Holder (Class C)

460018

•

•

•

•

460069

•

815009

* Certified to CSA.

** V-Gard Cap/Hat meets the voluntary standard for hi-visibility as prescribed by ANSI/ISEA Z89.1-2009. Look for the official hi-visibility marking [HV] on the helmet's ANSl label.

WARNING
Do not mix suspension and helmet sizes. Make sure the sizes match (example: standard-size suspension with standard-size helmet). Use only MSA suspensions in an MSA helmet. Failure to comply with the above will reduce the energy-absorbing ability of the protective helmet, which can result in serious injury or death.

1-Touch® Suspension

For standard size V-Gard Cap or Hat (6-1/2-8")

10061123

Fas-Trac® Suspension

Standard (6-1/2-8")

10087220

Large (7-8-1/2")

492568

Staz-On® Suspension

Standard (6-1/2-8")

10087218

Large (7-8-1/2")

492566

V-Gard 500 Caps: Vented and Non-Vented Styles:
Vented V-Gard 500 Caps provide cooling vents for improved air circulation and comfort, the Non-Vented V-Gard 500 500 Caps provide users with dielectric head protection.

Classification:

Type 1

Application:

General Purpose

Shell Material:

Polyethylene

Available Styles:

Slotted Cap

Sizes:

Standard (6112-8")

Standards:

ANSI/ISEA Z89.1-2009 (Vented - Class C; Non-Vented - Class E)

Certification:

Third-party by SEI

Customization:

Imprinting and striping available

Replacement Suspensions

4-Point Fas-Trac Suspension (6-1/2-8")

10034966

6-Point Fas-Trac Suspension (6-1/2-8")

10034967

V-Gard 500 Cap Assemblies

Color

Style

4-Point Fas-Trac
(Standard Size)

6-Point Fas-Trac
(Standard Size)

White

Vented

10034018

10034027

Blue

Vented

10034019

10034028

Yellow

Vented

10034020

10034029

Red

Vented

10034022

10034031

Green

Vented

10034023

10034032

Hi-Viz Orange*

Vented

10034026

10034035

Hi-Viz Yellow-Green*

Vented

10074819

10074820

White

Non-Vented

10034088

10034097

* V-Gard 500 Cap meets the voluntary standard for hi-visibility as prescribed by ANSI/ISEA Z89.1-2009. Look for the official hi-visibility marking [HV] on the helmet's ANSI label.

Super-V™ Protective Caps

Classification:

Type II (CSA);
Type I (ANSI)

Standards:

ANSI/ISEA Z89.1-2009 (Class E);
CSA Z94.1-2005 (Class E)

Application:

Lateral Protection

Sizes:

Standard (6-1/2_ 8")

Shell Material:

Polyethylene

Certification:

Third-party by SEI

Available Styles:

Slotted Cap w/ Foam Liner

Customization:

Imprinting and striping available

• Super-V Hi-Viz Orange Cap meets the voluntary standard for hi-visibility as prescribed by ANSI/ISEA Z89.1-2009. Look for the official hi-visibility marking [HV] on the helmet's ANSI label.

WARNING
Use only MSA's Fas-Trac Suspension designed for Super-V Caps. Use of any other suspension will reduce the energy­absorbing ability of the protective helmet, which can result in serious personal injury or death.

Super-V Assemblies

Color

w/ Fas-Trac

White

C217091

Yellow

C217093

Red

C217095

Orange

C217094

Blue

C217092

Navy Gray

C217097

Hi-Viz Orange*

C217100

Green

C217096

Gold

C217098

Black

C217140

Silver

C217099

Replacement Suspension

Fas-Trac Suspension for Super-V Caps only (6-1/2-8")

818276

Vanguard™ Protective Caps

Classification:

Type II

Standards:

ANSI/ISEA Z89.1-2009 (Class E); CSA Z94.1-2005 (Class E)

Application:

Lateral Protection

Sizes:

Standard (6-1/2- 8")

Shell Material:

Polyethylene

Certification:

Third-party by SEI

Available Styles:

Slotted Cap w/ Foam Liner

Customization:

Imprinting and striping available

WARNING
Use only MSA's Fas-Trac Suspension designed for Vanguard Helmets. Use of any other suspension will reduce the energy-absorbing ability of the protective helmet, which can result in serious personal injury or death.

Vanguard Assemblies

Color

w/ Fas-Trac

White

804940

Yellow

804939

Red

804944

Hi-Viz Orange*

804947

Blue

804946

* Vanguard H-Viz Orange Cap meets the voluntary standard for hi-visibility as prescribed by AN 5111 SEA Z89.1- 2009. Look for the official hi-visibility marking [HV] on the helmet's ANSI label.

Replacement Suspension

Fas-Trac Suspension for Vanguard Caps only (6-1/2-8")

804631

SmoothDome™ Protective Caps

Classification:

Type I

Standards:

ANSI/ISEA Z89.1-2009 (Class E);
CSA Z94.1-2005 (Class E)

Application:

General Purpose; Welding

Sizes:

Standard (6-1/2- 8")

Shell Material:

Polyethylene

Certification:

Third-party by SEI

Available Styles:

Slotted Cap

Customization:

Imprinting and striping available

Replacement Suspensions

4-Point Fas-Trac Suspension (6-8-1/2")

10087220

6-Point Fas-Trac Suspension (6-8-1/2")

10092163

Swing-Ratchet Suspension (6-1/2-7-5/8")

816645

Color

4-Point Fas-Trac
(Standard Size)

6-Point Fas-Trac
(Standard Size)

White

10074067

10084078

Blue

10074068

10084079

Yellow

10074069

10084080

Orange

10074070

10084081

Red

10074071

10084082

Green

10074072

10084083

Gray

10074073

10084084

Hi-Viz Orange*

10074077

10084088

Hi-Viz Yellow-Green*

10074084

10084095

Hi-Viz Orange w/Yellow-Green Stripe *

10095987

10095988

Hi-Viz Yellow-Green w/Orange Stripe*

10095989

10095990

Hi-Viz Orange w/Silver 5tripe*

10096141

•

Hi-Viz Yellow-Green w/Silver Stripe*

10096142

•

* Smooth Dome Cap meets the voluntary standard for hi-visibility as prescribed by ANSI/ISEA Z89.1-2009. Look for the official hi-visibility marking [HV] on the helmet's ANSI label.

Bump Caps

Classification:

Non-Impact

Available Styles:

Non-Slotted Cap w/
Plastic Suspension

Application:

Pest Control;
Meter Reading;
Food/Beverage
Processing; Meat
Packing; Auto Repair

Sizes:

Standard (6-1/2 - 8")

Standards:

None

Customization:

Imprinting and
striping available

Shell Material:

Polyethylene

WARNING
Bump Caps are NOT safety helmets and do NOT meet OSHA nor ANSI requirements for head protection. DO NOT USE as sport safety helmet. DO NOT USE when ANSI-compliant head protection is required or needed.

Color

w/ Plastic Suspension

Blue

10033650

Yellow

10033651

White

10033652

Red

10033653

Orange

10033654

Green

10033655

Classification:

Type I

Application:

General Purpose; Elevated Temperature*

Shell Material:

Phenolic

Available Styles:

Non-Slotted Cap; Non-Slotted Full Brim Hat

Sizes:

Small (6- 7-1/8")
Standard (6-1/2 - 8")
Large (7 - 8-1/2)

Standards:

ANSI/ISEA Z89.1-2009 (Class G)

Certification:

Third-party by SEI

Customization:

Imprinting and striping available

* Skullgard Caps and Hats can withstand radiant heat loads up to but not exceeding 350ºF.

Alternative Skullgard Assemblies

Large Skullgard Cap with Staz-On suspension, natural tan

82018

Large Skullgard Cap with Fas-Trac suspension, natural tan

475405

Standard Skullgard Cap with Staz-On suspension, lamp bracket and cord holder, natural tan

460409

Skullgard Hat with Staz-On suspension, lamp bracket and cord holder, natural tan

460389

Skullgard Cap with Fas-Trac suspension, welder's lugs, natural tan

482002

Skullgard® Protective Caps and Hats - Skullgard Assemblies

Skullgard Cap

Skullgard Hat

w/Staz-On

w/ Fas-Trac

w/ Swing-Ratchet

w/Staz-On

w/ Fas-Trac

Natural Tan

454617

475395

816651

454664

475407

White

454618

475396

•

454665

475408

Yellow

454619

475397

•

454666

•

Red

454620

•

•

•

•

Green

454621

•

•

454668

•

Grey

454622

•

•

•

•

Blue

454623

•

•

•

•

Orange

454626

•

•

454673

•

Hi-Viz Red Orange*

458702

•

•

•

•

* Skullgard Cap meets the voluntary standard for hi-visibility as prescribed by ANSI/ISEA Z89.1-2009. Look for the official hi-visibility marking [HV] on the helmet's ANSI label.

Replacement Suspensions

Size

Staz-On

Fas-Trac

Swing-Ratchet

1-Touch

Std (6-1/2-8)

454231

473334

816654 (6-1/2-7-5/8)

10061128

Large (7-8-1/2)

468096

478454

•

•

V-Gard Accessory System: Frames
The V-Gard Accessory System offers helmet-mounted frames for various work conditions and user helmets.
The sloped design allows liquids, chips and other materials to slide off the frame and away from the line of sight.
Each frame meets the applicable requirements for ANSIJISEA Z87 .1-2010.

V-Gard Frames for Slotted MSA Caps

PIN 10115730
V-Gard Frame for MSA Slotted Caps,
with debris control

• Stowable slot adaptors(note 1)allow frames to work
with or without earmuffs.
• Replaceable debris-control creates a tight seal
between the helmet and the frame.
• Sliding adjustment blades allow visor to work
with most half-mask respirators.
• Unique V-shaped channels(note 1)help direct liquid splash down and away
• Fits all slotted MSA caps.(note 2)
• ET frame tested to temperatures of 350°F (1 76TC), reducing warping, cracking or crazing.

PIN 10121266
v-Gard Frame for MSA Slotted Caps,
without debris control-

V-Gard Universal Frames for Slotted or Non-Slotted MSA Caps

PIN 10115822
V-Gard Universal Frame for Caps, with debris control

• Heavy-duty, flat rubber strap allows easy and secure placement of frame on the cap.
• Design allows use with other personal protective equipment, such as earmuffs and most half-mask respirators.
• Non-metal construction enables use in electrical applications.
• Unique V-shaped channels(note 1)help direct liquid splash down and away
• Fits all MSA caps-(Notes 2,3)
• Replaceable debris-control creates a tight seal between the helmet and the frame.
• ET Frame designed to withstand temperatures of 350°F (176.7ºC), reducing warping, cracking or crazing.

PIN 10121268
V-Gard Universal Frame for Caps, without debris control

V-Gard Chin Protectors
V-Gard Chin Protectors work as a system with select V-Gard Nitrometer Visors to help provide extra protection from impact and splash hazards to face and neck.
Note: MSA V-Gard Chin Protectors meet the requirements of ANSI/ISEA Z87.1-2010 when worn in conjunction with V-Gard Frames and V-Gard Visors.

PIN 10115828
Retractable
Chin Protector

3.82" (9.7 cm) in height, when unretracted
Unique retractable plates allow greater flexibility of head movement both up and down, as well as side-to-side. Opaque material ensures safety and standards compliance with clear, tinted, shaded and coated V-Gard Visors.

PIN 10115827
Standard
Chin Protector

2.86" (7.26 cm) in height
Opaque material ensures safety and standards compliance with clear, tinted, shaded and coated V-Gard Visors.
Compact, lightweight design provides additional protection between chin and neck area.

Note 1 - Patent pending.
Note 2 - MSA recommends the use of debriS control on V-Gard frames when wearing both cop-mounted earmuffs and V-Gard molded visors.
Note 3 - MSA does not recommend the use of the V-Gard Universal Frame with the MSA Smooth Dome cap when using cap-mounted earmuffs and V-Gard Molded visors. The MSA V-Gard Frame for Slotted Caps con be used for this particular combination.

WARNING
Use V-Gard Frames ONLY with V-Gard Visors, to ensure compliance with safety standards. Misuse can result in death, permanent impairment of sight, or other serious injury.

V-Gard Accessory System: Visors
V-Gard Visors for General Purpose Applications These visors are made of durable mesh or polycarbonate, and help protect wearers from flying debris, splash or spray. All V-Gard Visors for general purpose can be worn with cap-mounted earmuffs.

PIN 10116557 Mesh with Plastic Edge

7.5" (19 cm) x 17" (43.2 cm)
Durable, epoxy-coated 20 x 20 steel mesh, bound with
heavy-duty plastic.
Nitrometer can only be used with V-Gard Retractable
or Standard Chin Protector.
Meets requirements for ANSI/ISEA Z87.1 -2010 (general protector).
Do not use where splash, elevated temperature, UV or impact hazards exist.

PIN 10116558 Mesh with Plastic Edge Nitrometer

PIN 10117750 Clear, PC Flat (non-CSA version)

PIN 10117781 Clear, PC Flat Nitrometer (non-CSA version)

75" (19 cm) x 17" (43.2 cm) x .04" (1.02 mm) Wider design for improved resistance to impact and splash hazards. Nitrometer can only be used with V-Gard Retractable or Standard Chin Protector. Maximum UV protection (U6). Meets requirements for ANSI/ISEA Z87.1 -2010.

PIN 10115836 Clear, PC Flat

PIN 10115837 Clear, PC Flat Nitrometer

PIN 10120108 Bulk pack of 20; not packaged for individual sale

PIN 10117782 Clear, PC Flat (non-CSA version)

PIN 10117783 Clear, PC Flat Nitrometer(non-CSA version)

75" (19 cm) x 17" (43.2 cm) x .06" (1.52 mm) Wider design for improved resistance to impact and splash hazards. Slightly thicker for industrial applications such as cutting metal. Anti-fog and anti-scratch coating version available. Nitrometer can only be used with V-Gard Retractable or Standard Chin Protector. Maximum UV protection (U6). Meets requirements for ANSI/ISEA Z87.1-2010.

PIN 10115840 Clear, PC Flat

PIN 10115841 Clear, PC Flat Nitrometer, AF/AS

PIN 10115839 Clear, PC Flat, AF/AS

PIN 10118094 Clear, PC Flat (non-CSA version)

9.5" (19 cm) x 17" (48.3 cm) x .04" (1.02 mm) Slightly longer and wider design offers extended coverage for improved resistance to impact and splash hazards. Maximum UV protection (U6). Meets requirements for ANSI/ISEA Z87.1-2010.

PIN 10115863 Clear, PC Flat

PIN 10117496 (2 pair)

Slot Adaptors (2 pair). For use with V-Gard Frames for Slotted Caps.

PIN 10116539

Debris Control for V-Gard Cap Frames.
Debris control exceeds EN requirements for molten metal.

PIN 10117495

Heavy Duty Rubber Strap for V-Gard Universal Cap or Hat Frames.

MSA does not warrant, guarantee, or promote the use of components manufactured by other companies when used in conjunction with MSA products.

Chinstraps

Chinstrap, 2-pt, 3/4" cotton webbing, attaches to shell

81329

Chinstrap, 2-pt, 3/4" cotton webbing, attaches to suspension

81390

Chinstrap, 4-pt, cotton webbing, attaches to suspension (10/bag)

10124238

Chinstrap, 2-pt, 3/4" polyester webbing, attaches to shell

88128

Chinstrap, z-pt, 3/4" polyester webbing, attaches to suspension

81391

Chinstrap, 2-pt, 3/4" Nomex" webbing, attaches to shell

10102191*

Chinstrap, 3-pt, 3/4" nylon webbing, for Vanguard helmets only

804629

*For elevated temperatures.

V-Gard Select Liners

10118420
Flame-Retardant
V-Gard Select Liner

• Two layers of fabric, flame retardant to 50 washes
• Water repellant
• Adjustable chinstrap
• Quilted flaps allow uncompromised hearing protection levels when using earmuffs

10118423
Flame-Retardant
V-Gard Select Liner, Extended

• Two layers of fabric, flame retardant to 50 washes
• Water repellant
• Adjustable chinstrap
• Quilted flaps allow uncompromised hearing protection levels when using earmuffs
• Extended nape and wraparound collar for tucking into coat/shirt

10118424
Flame-Retardant
V-Gard Select Liner, Extended,
Bright with Reflective Striping

• Two layers of fabric, flame retardant to 50 washes'
• Water repellant
• Adjustable chinstrap
• Quilted flaps allow uncompromised hearing protection levels when using earmuffs
• Extended nape and wraparound collar for tucking into coat/shirt
• Bright yellow-green liner and reflective striping improves visibility

10118426
Flame-Retardant
V-Gard Neck Gaiter

• Two layers of fabric, flame retardant to 50 washes
• Water repellant
• Elastic strip keeps gaiter comfortably snug to face or neck
• Can be used with or without any V-Gard Liner for added warmth on face/neck

Note 1: Reflective striping flame retardant to 25 washings.

V-Gard Value Liners

10118417
V-Gard Liner Knit Cap

• Stylish skullie cap
• Design prevents liner from obstructing vision
• 100% high-bulk acrylic

10118418
V-Gard Liner Knit Hat-Cap Cover

• 100% acrylic
• Bright yellow-green for greater visibility
• Full face tube mounts under or over brim of MSA caps or hats, covering ears,
mouth, cheeks and neck
- Extended nape and wraparound collar for tucking into coat/shirt

10118419
V-Gard Value Liner

• 100% cotton twill
• Adjustable chin strap

10118422
V-Gard Value Liner, Extended

• 100% cotton twill
• Adjustable chin strap
• Extended nape and wraparound collar for tucking into coat/shirt

V-Gard Supreme Liners

10118421
Flame-Resistant V-Gard
Supreme Liner

• Multiple layers of flame-resistant fabric
• Fabric tested to withstand arc exposure to an ATPV of 8 cal/cm2
• Water repellant
• Adjustable chinstrap
• Inside neck pocket holds warming packet'

10118425
Flame-Resistant V-Gard
Supreme 1-Piece Liner,
Extended

• Multiple layers of flame-resistant fabric
• Fabric tested to withstand arc exposure to an ATPV of 8 cal/cm2
• Water repellant
• Adjustable chinstrap
• Inside neck pocket holds warming packet
• Extended nape and wraparound collar for tucking into coat/shirt
• Quilted flaps allow uncompromised hearing protection levels when using earmuffs

10118427
Flame-Resistant V-Gard
Supreme 2-Piece Liner

• Multi-layered flame-resistant top cap
- Fabric tested to withstand arc exposure to an ATPV of 8 cal/cm2
- Water repellant
• Adjustable chinstrap
• Inside neck pocket holds warming packet'
• Extended, zipper on/off, high-bulk, flame-resistant knit bottom
• No metal parts

Warming packets available at most sporting goods retailers; not sold with liners.

SunShade Hard Hat Accessory:
MSA's SunShades not only help to protect wearer's ears and neck from sun and heat, but also enhance worker visibility with contrasting color band and reflective striping. Fit most hats and caps. Features include:

• Breathable, high-visibility mesh fabric
• Choice of high-visibility yellow-lime or orange colors
• Hat clips help to keep SunShade from falling or rotating
• Point-of-sale packaging and scannable UPC-A barcode

Passive Helmet-Mounted Hearing Protectors
Hearing Protection for Caps
Third-party tested in accordance with ANSI S3.19-1974, CSA Class A and EN352-3.
Note: Cap model noise reduction ratings listed below are for standard V-Gard Helmets only.
left/RIGHT Cap Models unique design/BETTER FIT
Each cup is specifically designed for the left or right ear in order to conform to your head:

• Adjust individually to ear angle

• Raise and lower muffs independently

left/RIGHT Cap Models

10087439

left/RIGHT, LOW, White (NRR 21)

10087429

left/RIGHT, MEDIUM, Blue (NRR 25)

10087422

left/RIGHT, HIGH, Yellow (NRR 28)

Passive Hearing Protection Headband Models left/RIGHT Earmuffs
unique design/BETTER FIT
Each cup is specifically designed for the left or right ear in order to conform to your head:

• Adjust individually to ear angle

• Raise and lower muffs independently

left/RIGHT Headband Models

10087436

left/RIGHT, LOW, White, headband model (NRR 21)

10092878

Hygiene kit, left/RIGHT, LOW

10087426

left/RIGHT, MEDIUM, Blue, headband model (NRR 25)

10092879

Hygiene kit, left/RIGHT, MEDIUM

10087399

left/RIGHT, HIGH, Yellow, headband model (NRR 28)

10092880

Hygiene kit, left/RIGHT, HIGH

Arctic Elite™
• Anti-fog coating
• Rubber tipped temples
• Rubber nose bridge

Clear

10038845

Gray

10038846

Indoor/outdoor (I/O) Mirror

10059671

Arctic™
• Lightweight
• Tuff Stuff™ Anti-Scratch Coating
• Full side coverage
• Blue mirror lens offers maximum UV protection

Clear

697514

Gray

697515

Blue Mirror

10008179

Discovery™ II
• Tuff Stuff™ Anti-scratch Coating
• Lightweight and flexible
• Soft rubber nose bridge

Clear

10106382

OvrG™ II
• For use over small-to-medium framed glasses
• Updated "squared off" look
• Stylish enough to wear without glasses
• Maximum UV protection

Indoor/outdoor

10118476

Clear

10118475

Essential™ Adjust
• Anti-fog coating (as indicated)
• Horizontal and vertical adjustable temples
• Maximum UV protection (as indicated)
• Tuff Stuff™ Anti-Scratch Coating

Clear, AF

10119761

Silver mirror, AF/UV

10119758

Indoor/outdoor gold mirrored, AS/UV

10119757

Sky blue mirrored, UV

10119762

Flexi-Chem ™ IV
Safety Goggles
• Acetate lens for chemical resistance
• Splash- and impact-resistant
• Indirect vent
• Anti-fog coating

Clear

10106281

NuevoWrap™
• Maximum UV protection
• Stylish comfort
• Anti-fog coating

Gray

10106385

Vault™
Safety Goggles
• Tuff Stuff Anti-scratch Coating
• Splash- and impact-resistant
• Indirect vent
• Anti-fog coating

Clear

10106282