MSA Above Neck Protection Page 1

V-Gard Chin Protectors
V-Gard Chin Protectors work as a system with select V-Gard Nitrometer Visors to help provide extra protection from impact and splash hazards to face and neck. Note: MSA V-Gard Chin Protectors meet the applicable safety requirements (as noted on the V-Gard Nitrometer Visor) when worn in conjunction with V-Gard Frames and V-Gard Nitrometer Visors.

	P/N 10115828 Retractable Chin Protector	3.82" (9.7 cm) in height, when unretracted Unique retractable plates allow greater flexibility of head movement both up and down, as well as side-to-side. Opaque material ensures safety and standards compliance with clear, tinted, shaded and coated V-Gard Visors. 2.86" (7.26 cm) in height
	P/N 10115827 Standard Chin Protector	Opaque material ensures safety and standards compliance with clear, tinted, shaded and coated V-Gard Visors. Compact, lightweight design provides additional protection between chin and neck area.

V-Gard Accessory System Replacement Parts
	P/N 10117496 (2 pair)	Slot Adaptors (2 pair). For use with V-Gard Frames for Slotted Caps.
	P/N 10116539	Debris Control for V-Gard Cap Frames. Debris control exceeds EN requirements for molten metal.
	P/N 10117495	Heavy Duty Rubber Strap for V-Gard Universal Cap or Hat Frames.

Use only genuine MSA V-Gard Accessory System replacement parts to help ensure compatibility and compliance. MSA does not warrant, guarantee, or promote the use of components manufactured by other companies when used in conjunction with MSA products.

V-Gard Protective Hats and Caps

Classification:	Type I
Application:	General Purpose
Shell Material:	High-density polyethylene
Available Styles:	Slotted Cap; Slotted Full Brim Hat
Size:	Standard (6-1/2" - 8"), Small (6"- 7-1/8"), Large (7"- 8-1/2")
Standards:	ANSI/ISEA Z89.1-2009 (Class E); CSA Z94.1-2005 (Class E)
Certification:	Third-party by SEI
Customization:	Imprinting and striping available

V-Gard Complete Assemblies

	Standard V-Gard Slotted Cap				V- Gard Slotted Hat
Color		w/ Staz-On Suspension	w/ 1-Touch Suspension	w/ Fas-Trac Suspension		w/ Staz-On Suspension	w/ 1-Touch Suspension	w/ Fas-Trac Suspension
White		463942	10057441	475358		454733	10058321	475369
Blue		463943	10057442	475359		454732	10058320	475368
Yellow		463944	10057443	475360		454730	10058318	475366
Orange		463945	10057444	475361		454734	10058322	496075
Red		463947	10057446	475363		454736	10058324	475371
Green		463946	10057445	475362		454735	10058323	475370
Gray		463948	10057447	475364		454731	10058319	475367
Hi-Viz Orange		488148	10057420	488146		489360	10058326	10021292
Hi-Viz Yellow- Green		•	10061514	10061512		•	10061516	10061515
Certified to CSA. V-Gard Cap/Hat meets the voluntary standard for hi· visibility as prescribed by ANSI/ISEA Z89.1·2009. Look for the official hi-visibility marking (HV) on the helmet's ANSI label.

Replacement V-Gard Suspensions

Replacement V-Gard Suspensions
Staz-On Suspension	10087218
1-Touch Suspension	10067218
Fas-Trac Suspension	10007220

V-Gard 500 Caps: Vented and Non-Vented Styles

Classification:	Type I
Application:	General Purpose
Shell Material:	High-density polyethylene
Available Styles:	Slotted Cap
Size:	Standard (6112" - 8")
Standards:	ANSI/ISEA Z89.1-2009 (Vented - Class C; Non-Vented - Class E)
Certification:	Third-party by SEI
Customization:	Imprinting and striping available

MSA helmets marked "LT" meet the voluntary requirements under ANSI/ISEA Z89.1-2009 for "Lower Temperature." Helmets marked "LT" are conditioned to -22ºF and then tested for impact and penetration, as outlined in the Standard. Any helmet NOT marked with "LT" are only tested to 0ºF.

V-Gard 500 Complete Assemblies
Color	Style	4-Point Fas-Trac Suspension	6-Point Fas-Trac Suspension
White	Vented	10034018	10034027
Blue	Vented	10034019	10034028
Yellow	Vented	10034020	10034029
Red	Vented	10034022	10034031
Green	Vented	10034023	10034032
Hi-Viz· Orange	Vented	10034026	10034035
Hi-Viz Yellow- Green	Vented	10074819	10074820
White	Non- Vented	10034088	10034097

Replacement V-Gard 500 Suspensions

Replacement V-Gard 500 Suspensions
4-Point Fas-Trac Suspension (6-1/2"-8")	10034966
6-Point Fas-Trac Suspension (6-1/2"-8")	10034967

Skullgard Protective Caps and Hats

Note: Skullgard Caps and Hats can withstand radiant heat loads up to but not exceeding 350ºF

Classification:	Type 1
Application:	General Purpose; Elevated Temperature'
Shell Material:	Phenolic
Available Styles:	Non-Slotted Cap; Non-Slotted Full Brim Hat
Size:	Standard (6-1/2" - 8")
Standards:	ANSI/ISEA Z89.1-2009 (Class G)
Certification:	Third-party by SEI
Customization:	Imprinting and striping available

Skullgard Complete Assemblies
	Skullgard Non-Slotted Cap			Skullgard Non-Slotted Hat
Color		w/ Staz-On Suspension	w/ Fas-Trac Suspension		w/ Staz-On Suspension	w/ Fas-Trac Suspension
Natural Tan		454617	475395		454664	475407
White		454618	475396		454665	475408
Yellow		454619	475397		454666	•
Red		454620	•		•	•
Green		454621	•		454668	•
Gray		454622	•		•	•
Blue		454623	•		•	•
Orange		454626	•		454673	•
Hi-Viz Red- Orange		458702	•		•	•
Skullgard Cap meets the voluntary standard for hi-visibility as prescribed by ANSI/ISEA Z89.1-2009. Look for the official hi-visibility marking (HV) on the helmet's ANSI label.

Replacement Skullgard Suspensions

Replacement Skullgard Suspensions
Size	Staz-On	Fas-Trac	1-Touch
Std (6'-1/2”-8")	454231	473334	10061128

V-Gard Accessory System

The V-Gard Accessory System features frames, visor and chin protectors designed for MSA helmets. Each frame or framelvisor combination meets the applicable requirements for ANSI/ISEA Z87.1-201 0, EN 166, CSA Z94.3 or AS/NZS 1337, as well as many local standards, as marked.

V-Gard Frames for Slotted MSA Caps
	P/N 10115730 V-Gard Frame for MSA Slotted Caps, with debris control	Stowable slot adaptors' allow frames to work with or without earmuffs. Replaceable debris-control creates a tight seal between the helmet and the frame. Sliding adjustment blades allow visor to work with most half-mask respirators. Unique V-shaped channels. Fits all slotted MSA caps ET frame tested to temperatures of 350ºF (176.7ºC), reducing warping, cracking or crazing.
	P/N 10121266 V-Gard Frame for MSA Slotted Caps, without debris control
	P/N 10115821 V-Gard Frame for MSA Slotted Caps, Elevated Temperatures (ET), with debris control
	P/N 10121267 V-Gard Frame for MSA Slotted Caps, Elevated Temperatures (ET), without debris control

V-Gard Universal Frames for Slotted or Non-Slotted MSA Caps
	P/N 10115822 V-Gard Universal Frame for Caps, with debris control	Heavy-duty, flat rubber strap allows easy and secure placement of frame on the cap. Design allows use with other personal protective equipment, such as earmuffs and most half-mask respirators. Non-metal construction enables use in electrical applications. Unique V-shaped channels' Fits all MSA caps. Replaceable debris-control creates a tight seal between the helmet and the frame.
	P/N 10121268 V-Gard Universal Frame for Caps, without debris control

1 Patent pending.
2 MSA recommends the use of debris control on V-Gard frames when wearing both cap-mounted earmuffs and V-Gard molded visors.
3 MSA does not recommend the use of the V-Gard Universal Frame with the MSA Smooth Dome cap when using cap-mounted earmuffs and V-Gard Molded visors. The MSA V-Gard Frame for Slotted Caps can be used for this particular combination.

V-Gard Visors for General Purpose Applications
These visors are made of durable mesh or polycarbonate, and help protect wearers from flying debris, splash or spray. All V-Gard Visors for general purpose can be worn with cap-mounted earmuffs.
	P/N 10116557 Mesh with Plastic Edge	8" (20.3 cm) x 77" (4 3.2 cm) Durable, epoxy-coated 20 x 20 steel mesh, bound with heavy-duty plastic. Nitrometer can only be used with V-Gard Retractable or Standard Chin Protector. Meets requirements for ANSI/ISEA Z87.1-201 0 (general protector). Do not use where splash, elevated temperature, UV or impact hazards exist.
	P/N 10116558 Mesh with Plastic Edge Nitrometer
Did you know? All V-Gard polycarbonate clear or green tinted visors offer maximum UV protection as measured under ANSI/ISEA Z87.1-2010? Just look for the "U6" marking.
	P/N 10117750 Clear, PC Flat (non-CSA version)		8" (20.23 cm) x 17" (43.2 cm) x .04" (1.02 mm) Wider design for improved resistance to impact and splash hazards. Maximum UV protection. Nitrometer can only be used with V-Gard Retractable or Standard Chin Protector. PNs 10117750 and 10117787 meet requirements for ANSI/ISEA Z87.1-2010.
	P/N 10117781 Clear, PC Flat Nitrometer (non-CSA version)
	P/N 10115840 Clear, PC Flat	P/N 10117783 Clear, PC Flat Nitrometer (non-CSA version)	8" (20.32 cm) x 17" (43.2 cm) x .06" (1.52 mm) Wider design for improved resistance to impact and splash hazards. Slightly thicker for industrial applications such as cutting metal. Maximum UV protection. Nitrometer can only be used with V-Gard Retractable or Standard Chin Protector. PN 10115840 meets requirements for EN 766 (2C-1.2 MSA 1B89), ANSI/ISEA Z87.1-2010, CSA Z94.3 and AS/NZS 1337. PN 10117782 and 10117783 meet all of the above, except CSA Z94.3.
	P/N 10117782 Clear, PC Flat (non-CSA version)
	P/N 10118094 Clear, PC Flat (non-CSA version)		9.5" (19cm) x 17" (48.3 cm) x .04" (7.02 mm) Maximum UV protection Slightly longer and wider design offers extended coverage for improved resistance to impact and splash hazards. Meets requirements for ANSI/ISEA Z87.1-2010.
Did you know? V-Gard molded, green and clear visors (whether propionate or polycarbonate) offer superior optical quality and resistance to many chemicals.
	P/N 10115853 Clear, PC, Molded, AF/AS	10.375" (26.4 cm) x 17" (43.2 cm) x .098" (2.49 mm) Designed for heavy duty use - thicker than most visors on the market. Maximum UV protection. Molded for superior optics. Extended length for greater coverage of face and neck. Anti-fog and anti-scratch coatings. Meets requirements for EN 766 (2C-1.2 MSA 1BT89KN), ANSI/ISEAZ87. 1-2010, CSA Z94.3, and AS/NZS 1337.
	P/N 10115854 Green Tint, PC Molded, AF/AS	10.375" (26.4 cm) x 17" (43.2 cm) x .098" (2.49 mm) Designed for heavy duty use - thicker than most visors on the market. Maximum UV protection. Molded for superior optics. Extended length for greater coverage of face and neck. Green tint helps alleviate eye strain and fatigue by reducing excessive glare, especially in outdoor working conditions. Not for use where a Shade Infrared OR) visor is required. Anti-fog and anti-scratch coatings. Meets requirements for EN 166 (2-2 MSA1BT9KN), ANSI/ISEA Z87. 1 -2070, CSA Z94.3, and AS/NZS 1337.
WARNING Wear MSA impact-rated spectacles or goggles under visors. Inspect visors frequently and replace immediately if worn, scratched or damaged. Use V-Gard Visors ONLY with V-Gard Frames and V-Gard Chin Protectors to ensure compliance with applicable standards. Misuse can result in death, permanent impairment of sight, or other serious injury.

V-Gard Visors for Chemical and Splash Applications
These visors are for chemical and splash applications, and are ideal for use in manufacturing plants, laboratories and other industrial applications that demand face protection against abrasive particles, splash and spray. Molded V-Gard Visors are manufactured with hand-polished molds for unsurpassed, distortion-free optical clarity and impact resistance.

	P/N 10115855 Clear Propionate, Molded	8" (20.3 cm) X 17" (43.2 cm) X .098" (2.49 mm) Impact-rated protection. Molded for superior optics. Extra thick to help prevent warping, cracking or crazing under tough work conditions. Nitrometer can only be used with V-Gard Retractable or Standard Chin Protector. Meets requirements for EN 166 (MSA 1 B 3), ANSIIISEA Z87.1-20 1 0, (SA Z94.3 and ASINZS 1337.
	P/N 10115856 Clear Propionate, Molded Nitrometer
	P/N 10115851 Clear Propionate, Molded	9.25" (23.5 cm) x 18" (45.7 cm) X .098" (2.5 mm) Impact-rated protection. Molded for superior optics. Extended length and width for greater coverage of face and neck? Extra thick to prevent warping, cracking or crazing under tough work conditions. Meets requirements for EN 166 (MSA 1 B 3), ANSI/ISEA Z87.1-2010, CSA Z94.3, and AS/NZS 1337.
V-Gard propionate visors offer both chemical resistance and impact protection, unlike most propionate visors on the market. Not only are they marked with Z87+, but they are also compliant with EN166, meaning they were impacted nearly 32% faster than ANSI/ISEA Z87.1-2010.

V-Gard Visors for Elevated Temperature Applications
These visors help keep workers comfortable in environments such as steel/smelting plants where they are exposed to high levels of heat and/or excessive glare. Our V-Gard Visors are engineered for heavy duty use and are thicker than most visors in the marketplace, which not only helps ensure impact resistance, but also reduces heat warping.

	P/N 10115844 Clear PC, Molded, AF/AS	9.25" (23.5 cm) x 17" (43.2 cm) x .098" (2.5 mm) Extended length for greater coverage of face and neck. Maximum UV protection. Molded for superior optics. Anti-fog and anti-scratch coatings. Meets requirements for EN 166 (2(-1.2 MSA 1 BT89KN), ANSIIISEA Z87.1-20 1 0, (SA Z94.3, and AS/NZS 1337.
	P/N 10115845 Green Tint PC. Molded, AF/AS	9.25" (23.5 cm) x 17" (43.2 cm) x .098" (2.5 mm) Extended length for greater coverage of face and neck. Maximum UV protection. Molded for superior optics. Anti-fog and anti-scratch coatings. Green tint helps alleviate eye strain and fatigue by reducing excessive glare. Not for use where a Shade Infrared (lR) visor is required. Meets requirements for EN 166 (2.2 MSA 1BT9KN), ANSI/ISEA Z87.1-2010, CSA Z94.3, and AS/NZS 1337.
	P/N 10115846 Clear PC, Molded, AF/AS	9.25" (23.5 cm) x 18" (45.7 cm) x .098" (2.5 mm) Extended length and width for greater coverage of face and neck? Maximum UV protection. Molded for superior optics. Anti-fog and anti-scratch coatings. Meets requirements for EN 166 (2C-1.2 MSA 1BT89KN), ANSI/ISEA Z87.1-20 10, CSA Z94.3, and AS/NZS 1337.
	P/N 10115849 Green Tint PC. Molded, AF/AS	9.25" (23.5 cm) x 18" (45.7 cm) x .098" (2.5 mm) Green tint helps alleviate eye strain and fatigue by reducing excessive glare. Not for use where a Shade Infrared (lR) visor is required. Extended length and width for greater coverage of face and neck? Maximum UV protection. Molded for superior optics. Anti-fog and anti-scratch coatings. Meets requirements for EN 166 (2.2 MSA 1 BT9KN), ANSI/ISEA Z87.1-2010, CSA Z94.3, and AS/NZS 1337.

Refer to the our Chemical Applicatian Quick Reference Guide found in this brochure for performance against select chemical families.
Visor will not close fully when worn with earmuffs.
'The proper personal protective equipment should be selected for use and application by the site safety specialist, whose responsibility is to ensure hazards, communication of instructions, precautions and limitations are conveyed and observed.

WSP home page	Products page	Suppliers page
MSA 2012 Index	Next MSA2012 Page	Older MSA Index

WASP Safety handles online retail sales for some items on this Website. Check it out: http://www.waspsafety.com