MSA Safety Page 3

For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.

Credit Card Images

Loading

OptimAir Mask-Mounted PAPR with Type HE OptiFilter XL Filter
OptimAir PAPR with Advantage 4100 Facepiece OptimAir PAPR with Advantage 3100 Facepiece
The OptimAir Mask-Mounted Powered Air-Purifying Respirator (PAPR) is designed for abatement, nuclear, lead and other hazardous particulate environments. The PAPR filters particulates from ambient air and provides a constant flow of respirable air to the Advantage 3100, 4100, Ultravue or Ultra Elite Facepiece. The mask-mounted motor/blower with HEPA filter has a low profile design that enhances user maneuverability and simplifies decontamination.
The PAPR includes a small, lightweight, water-resistant nickel metal hydride (NiMH) battery pack that will operate for eight hours of continuous use. Weighing only 12.5 oz., it measures only 3"x5"x 1". The low-profile unit fits close to the wearer's body. The sealed battery pack is water-resistant for easy shower decontamination. Another advantage: NiMH batteries do not have the "memory effect" associated with NiCad batteries. The standard Dual-Rate Battery Charger will recharge a fully discharged battery in less than three hours. Metal connectors on cable ends provide a durable and secure fit to the battery and blower housfng. NIOSH approved as mask-mounted PAPR and also approved as a negative-pressure APR for egress.
NOTE: the Mask-Mounted PAPR replaces the MM2K PAPR.

Complete OptimAir Mask Mounted PAPR Assemblies (with facepiece)

All assemblies include: motor/blower, NiMH battery, dual-rate battery charger, cable, one Type HE OptiFilter XL Cartridge, belt, and choice of Advantage 3100 or 4000 Facepiece.

Advantage 3100 PAPR

Head Harness

Small

Medium

Large

with rubber head harness

10095181

10095182

10095183

with Advantage head harness

10095184

10095185

10095186

Advantage 4100 PAPR

Material

Small

Medium

Large

Black Silicone, with rubber harness

10095193

10095189

10095197

Black Hycar, with rubber harness

10095194

10095190

10095198

Black Silicone, with cloth harness

10095191

10095187

10095195

Black Hycar, with cloth harness

10095192

10095188

10095196

OptimAir Mask Mounted PAPR Kit (less facepiece)
Upgrade Kit includes: motor/blower module, NiMH battery, dual-rate battery charger, cable, one Type HE OptiFilter Cartridge, and belt. Use your present facepiece or order facepiece separately from ordering chart below.

OptimAir Mask-Mounted Upgrade Kit

10095166

Replacement Facepieces Advantage 3100
Facepiece Small Medium Large
with rubber head harness 10028999 10028998 10029000
with Advantage head harness 10031343 10031342 10031344
  Advantage 4100 PAPR*
Material Small Medium Large
Black Silicone, with net head harness 10083796 10083792 10083800
Black Hycar, with net head harness 10083797 10083793 10083801
"Also reguires R040 Adapter P/N 10065330

OptiFilter Cartridges for OptimAir Mask-Mounted PAPR

MSA Purifying Element

PurifyingProtection Code

Color Code

No. in Box

Part No.

OptiFilter XL, Type HE

HE

 

20

10042346

OptiFilter XL, Type HE

HE

 

| 6

496081


OptimAir TL PAPR
OptimAir TL PAPR
OptimAir® TL PAPR
The OptimAir TL PAPR is NIOSH-certified with loose fitting hoods and a variety of full facepieces to protect against particulates, toxic gases and vapors, or a combination. "Smart"features set flow rates automatically through built-in sensors. Unit offers audible and visual alarms for added worker safety. Audible alarms travel up the breathing tube
close to the user's ear. MSA's OptimAirTL PAPR incorporates a sleek, low-profile design for user comfort never before offered in a PAPR. All components including the motor blower, cartridges and battery are packaged in a single hip-hugging housing. Improved motor blower electronics allow for optimum air flow and filter resistance while the compact and ergonomic battery pack affords lightweight comfort and fit. Flow control sensors are activated by insertion of the cartridges and breathing hose to the blower housing.The unit automatically adjusts for altitude via an internal pressure switch.
Superior design features permit fast, accurate changeout of cartridges, hoods and batteries. Slim, curved PAPR housing helps to minimize fatigue and permits work in tight confined areas. OptimAirTL PAPR kits include motor blower, smart charger, battery, decon belt, and hose.

NIOSH-Approved
Available with variety of full facepieces and hood materials, styles and configurations including DuPont Tychem SL and QC with single and double bib. A choice of hose connection is also available. Unit has an APF of 1,000 (Assigned Protection Factor) when used with hood or facepiece.

Smart Design Features

  • Crush proof breathing tube
  • Automatic setting of flow rates
  • Audible and visual alarms for low flow indication and low battery voltage
  • Less bulk and better weight distribution improves worker efficiency
  • Every cartridge has its own sealing gasket

Cartridges and Accessory Options

  • P100
  • Acid gas/organic vapor plus P100
  • Acid gas/ammonia/formaldehyde plus 100
  • Comfort waist belt
  • Extended life battery
  • Shoulder strap
NOTE: cartridges and other accessories below

OptimAir TL Kits
OptimAir TL Kits
  with standard battery with Long Life battery

for Facepieces

10081114

10081115

for Hoods

10081116

10081117

for Optivizor

10099274

10099275

Facepieces

Advantage 3100 Facepieces (Single Port)

Silicone

Small

Medium

Large

Rubber head harness

10028999

10028998

10029000

Advantage head harness

10031343

10031342

10031344

Advantage 4100 Facepieces* (Single Port)

Silicone

Small

Medium

Large

Net head harness

10083796

10083792

10083800

Rubber head harness

10083798

10083794

10083802

Hycar

Small

Medium

Large

Net head harness

10083797

10083793

10083801

Rubber head harness

10083799

10083795

10083803

Ultra Elite Facepieces

Silicone

Small

Medium

Large

Rubber head harness

493072

493028

493116

Hycar

Small

Medium

Large

Rubber head harness

493064

493020

493108

*Also requires RD40Adapter P/N 10065330

Facepiece Accessories

10065330

RD-40 Inlet assembly, required for all Advantage 4100 facepieces

10049630

Hose for facepiece

10087129

Flow check device for facepiece only

 

Tychem® QC (polyethylene-coated Tyvek)

Tychem® SL (saranex-coated Tyvek)

Single Bib

4-pack, threaded connector, with suspension

10083329

10083381

4-pack, threaded connector, less suspension

10083387

10083389

20-pack, threaded connector, less suspension

10095739 (white) 10095748 (yellow)

10095741

4-pack, standard, with suspension

10083383

10083385

4-pack, standard, less suspension

10083391

10083393

20-pack, standard, less suspension

10095740

10095742

Double Bib

4-pack, threaded connector, with suspension

10083330

10083382

4-pack, threaded connector, less suspension

10083388

10083390

20-pack, threaded connector, less suspension

10095743 (white) 10095749 (yellow)

10095745

4-pack, standard, with suspension

10083384

10083386

4-pack, standard, less suspension

10083392

10083394

20-pack, standard, less suspension

10095744

10095746

OptimAir TL Hoods

Hoods & OptiVizors & Accessories
Hood Suspensions
10103864 20-pack
10078469 1 each
Hoods for use with the OptimAir 6A PAPR

10095747

Single-bib, 20-pack, 6A connector, with suspension

10084820

Single-bib, 4-pack, 6A connector, with suspension

Hood Accessories

10083843

Hose clamp for standard hood, 6-pack

10049631

Hood hose

10078469

Suspension only, for Tyvek hood

10083618

Sweatband for hood suspension, 10-pack

10082441

Cover lens for hood (pack of 10)

10087130

Flow check device for hood only

10089665

Fastener kit, hood to V-Gard helmet

OptiVizor® and Accessories
10049638 OptiVizor
10082281 OptiVizor hose, extended length (can also be used with hoods)
10058141 Replacement lens for OptiVizor, clear

Cartridges
10080455 P100 cartridge (6 pack)
10080454 OV/AG P100 cartridge (6 pack)
10080456 AG, AM, FM, P100 cartridge (6-pack)
10068152 Spark Guard cartridge cover (single unit) (2 req.)
Battery and Charger
10076108 Standard battery for OptimAirTL PAPR
10076110 Standard battery charger for OptimAirTL PAPR
10076109 Long-life battery for OptimAirTL PAPR
10076107 Long-life battery charger for OptimAirTL PAPR
Decon Accessories

10075799

Decon cover for OptimAirTL PAPR, 5-pack, natural

10087152

Decon cover for OptimAirTL PAPR, 5-pack, yellow

10091958

Decon cover for OptimAirTL PAPR, urethane, .12 ml thick, 5-pack, yellow

10078201

Decon belt (backpack buckle)

10074725

Decon belt (cam lock buckle)

Miscellaneous Accessories
10085084 "O"Ring replacement, hose hood, 10-pack
10049623 Comfort belt
10081414 Cartridge receptacle cover
10059112 Shoulder strap for OptimAirTL
10088150 Blower unit only
Cartridges & Accessories


OptimAir 6A PAPR with OptiFilter Cartridges
OptimAir 6A PAPR
OptimAir® 6A PAPR with OptiFilter® Cartridges
The OptimAir 6A Powered Air-Purifying Respirator (PAPR) provides respiratory protection by filtering contaminates from ambient air and providing a constant flow to either a face piece or hood. It can be used with a family of filters and chemical cartridges for protection against particulates, toxic gases and vapors, or a combination of these hazards.
The OptimAir 6A includes a motor/blower module and rechargeable NiCad battery and is designed to operate for a full shift. It uses only two filters. The unit is available with full or half-mask facepieces, or a hood. Hooded OptimAir 6A PAPRs are only approved for use with the OptiFilter Type HE Cartridges only.
Applications include hazardous materials cleanup, asbestos and lead paint abatement, chemical processing, foundry, smelter and coke oven applications, and nuclear facilities work.

Facepieces for OptimAir 6A
 

Black Hycar

Black Silicone

 

Small

Medium

large

Small

Medium

large

Ultravue

471218

457126

471230

480251

480247

480255

Ultra Elite

493064

493020

493108

493072

493028

493116

Comfo

480127

480122

480132

480130

480125

480135

Comfo Welder’s

484204

484198

484210

484206

484200

484212

OptimAir 6A PAPRs with Facepieces

OptimAir 6A PAPR with Ultravue Facepiece Assembly includes motor/blower module, NiCad Battery, facepiece, breathing tube, belt, and battery charger.

Facepiece

Size

Part No.

Black Hycar Ultravue

Medium

494236

OptimAir 6A PAPR, less facepiece Assembly includes motor/blower module, NiCad Battery, breathing tube, belt, and battery charger. Order facepiece from table above.

OptimAir 6A PAPR, less facepiece

10023039

OptimAir 6A with Tyvek Hood Assembly includes motor/blower module, NiCad battery, Tyvek Hood, breathing tube, belt and battery charger.

Facepiece

Cartridge

Part No.

Tyvek Hood

Type HE only

491301

Replacement Parts

Motor/Blower Module

491102

Battery Pack for OptimAir 6A

491120

Standard Single-Unit Battery Charger

463471

Single-Unit Dual-Rate Battery Charger

486614

Replacement Hoods for OptimAir 6A with Tyvek Hood

Tyvek Hood Shell only

488721

Tyvek Hood Assembly

486485

Support Belts for PAPRs

A polyurethane-coated nylon support belt is the standard belt with the OptimAir 6A PAPR. In addition, MSA offers a clear PVC support belt. Both belts are easy to decontaminate. If decontamination is not a factor, users may opt for an uncoated nylon web belt. Optional shoulder support strap may be used with any of these PAPR belts.

Polyurethane-coated Nylon Suport Belt

492827

PVC Support Belt

473902

Web Support Belt, uncoated

9961

Shoulder Support Strap

803903

OptiFilter XL/OptiFilter Cartridges for OptimAir 6A

MSA Purifying Element

Purifying Protection Code

Respiratory Hazards

Part No.

No. in Box

NIOSH Approval

OptiFilter XLType H

HE

Particulate filter (99.97% filter efficiency level) effective against all particulate aerosols.

10042346

20

TC-21C-512

TC-21C-513

496081

6

(Ultravue) TC-21C-516

(Comfo Style) (Tyvek Hood)

OptiFilter GMA-H

OV/HE

Approved for not more than 1,000 ppm organic vapors; particulate filter (99.97% filter efficiency level) effective against all particulate aerosols 1,2,3,4,5

800376

6

TC-23C-1263 (Ultravue)

TC-23C-1257 (Comfo Style)

OptiFilter GMC-H

OV/AG/HE

Approved for not more than 1,000 ppm organic vapors; chloride, chlorine dioxide, hydrogen chloride, sulfur dioxide, and escape only from hydrogen sulfide; particulate filter (99.97% filter efficiency level) effective against all particulate aerosols. 1,2,3,4,5

494217

6

TC-23C-1056 (Ultravue)

TC-23C-1252 (Comfo Style)

OptiFilter GMD-H

AM/MA/HE

Approved for ammonia and methylamine; particulate filter (99.97% filter efficiency level) effective against all particulate aerosols. 1,2,4,5

494219

6

TC-23C-1058 (Ultravue)

TC-23C-1254 (Comfo Style)

Notes
1. Cannot be used w/ PreFilter/Cover Assembly PIN 497098.
2. Do not use in atmospheres containing less than 19.5 percent oxygen, or in atmospheres immediately dangerous to life or health.
3. Do not wear for protection against organic vapors with poor waming properties or those which generate high heats of reaction with the sorbent material in the cartridge.
4. Cannot be used on PAPRs equipped with Tyvek Hood.
5. 99.97 percent efficient against 0.3 micron DOP.

WARNING

An appropriate cartridge change-out schedule must be developed by a qualified professional, unless the cartridge/canister utilizes an end-of-service-life indicator. The change-out schedule must take into account all factors that may influence respiratory protection including specific work practices and other conditions unique to the worker's environment. If using against substances having poor warning properties, there is no secondary means of knowing when to replace the cartridges/canister. In such cases, take appropriate additional
precautions to prevent overexposure, which may include a more conservative change-out schedule or using an air-supplied respirator or SCBA. Failure to follow this warning can result in serious personal injury or death. As a reference, below is a partial list of substances having poor warning properties:

Acrolein

Hydrogen cyanide

Nitric acid

Phosphorus trichloride

Aniline

Hydrogen selenide

Nitro compounds

Stibine

Arsine

Methanol

Nitrogen oxides

Sulfur chloride

Bromine

Methyl bromide

Nitroglycerin

Urethane or other diisocyanate- containing paints

Carbon monoxide

Methyl chloride

Nitromethane

Vinyl chloride

Diisocyanates

Methylene chloride

Phosgene

 

Dimethyl sulfate

Nickel carbonyl

Phosphine

 


OptimAir 6A PAPR for Homeland Security Applications
OptimAir 6A PAPR

A powered air-purifying respirator that filters contaminants from ambient air via CBA/RCA OptiFiler Cartridges. Belt-mounted motor/blower provides constant air flow via breathing tube to facepiece.

  • Features Millennium Facepiece
  • Used with combination cartridges for protection against particulates, toxic gases and vapors, or a combination of these hazards
  • Maintenance-free lithium battery with 10-year shelf life
  • Optional rechargeable NiCd battery

OptimAir 6A PAPR Kit complete with medium Millennium Facepiece, lithium battery, belt, motor/blower module. (Order OptiFilter cartridges separately.)

10046394

CBA/RCA OptiFilter Cartridges, Box of 6

10011890

Lithium Battery Pack for OptimAir 6A PAPR

816912

Motor/Blower Module

491102

Protective Covers, Package of 5

808494

Optional Battery and Charger

Rechargeable NiCad Battery

491120

Standard Single-Unit Battery Charger

463471

Single-Unit, Dual-Rate Battery Charger

486614

Other OptimAir 6A Replacement Parts and Accessories

Breathing Tube Assemblies

For Tight-Fitting Facepieces, 30"

486364

For Tight-Fitting Facepieces, 36"

492197

For Tyvek Hood

481980

Protective Cover

Protects from water (such as in asbestos decontamination showers) or particulate contamination.

Pkg of 5 for OptimAir 6A

808494

Flow-Check Devices

MSA flow-check devices allow users of PAPRs to quickly and conveniently verify that their unit is providing the required air flow.

Flow-Check Meter

487995

Adapter for Flow-Check Meter for use with Tyvek Hood

489999

Adapter for Flow-Check Meter for use with OptimAir MM PAPR

491046


Advantage 420 Accessories
Advantage 420
Description

Part No.

Storage poly bag 10097887
Vinyl storage bag with belt loops 468730
Advantage Adapter, pkg of 2, for threaded cartridges 809999
Advantage Quantitative Fit Test Adapter 10056424

Instructional CD

10097899

Advantage 200 LS Accessories
Advantage 200 LS

Description

Part No.

Comfo Cartridge Adapter, pkg of 2

809999

Advantage Fit Test Adapter

10056424

Carrying pouch for half-mask respirators 468730

Comfo Classic Accessories
Comfo Classic

Description

Part No.

QuikChek II Fit-Test Adapter for Comfo Respirators

812022

QuikChek II Replacement Kit with 25 ft of sampling tubing and 25 connectors, clips, and suction cups

803196

Carrying pouch for half-mask respirators

10056424

Comfo Elite Accessories
Comfo Elite

Description

Part No.

QuikChek II Fit-Test Adapter for Comfo Respirators

812022

QuikChek II Replacement Kit with 25 ft of sampling tubing and 25 connectors, clips, and suction cups

803196

Carrying pouch for half-mask respirators

10056424

Advantage 3000 Series Accessories
Advantage 3000

Description

Part No.

Spectacle Kit for Advantage Respirators

10029298

Advantage Fit Test Adapter

10056424

Cover Lens Clear, box of 25 10031542
Black plastic carrying/storage case D2056734

Advantage 4000 Series Accessories
Advantage 4000
Spectacle Kit for Advantage Respirators 10029298
Advantage Fit Test Adapter, for Advantage 4200 Facepieces 10056424
QuikChek III Fit test Adapter for Advantage 4100 Facepieces* 805078
Cover Lens Clear, box of 25 10031542
Clip-On Welders Adapter for Advantage 4200 Twin Port Facepiece, with cover lens, less filter plate 10077063
Clip-On Welders Adapter for Advantage 4100 Single Port Facepiece, with cover lens, less filter plate 10065326

Black plastic carrying/storage case

D2056734

Advantage 1000 Accessories
Advantage 1000

Description

Part No.

Advantage Fit Test Adapter

10056424

QuickChek Adapter

10006227

Advantage 1000 Cover Lens, clear, box of 25
813832
Clear Lens Shield for Advantage 1000, small
806463
Clear Lens Shield for Advantage 1000, medium/large 806462

Tinted Lens Shield for Advantage 1000, small

806465

Tinted Lens Shield for Advantage 1000, medium/large 806464
Nosecup, black, small 806468
Nosecup, black, medium 806466
Nosecup, black, large 806470

ESP II Communication System for Advantage 1000

10026265

Black plastic carrying/storage case

D2056734

Carrying pouch for Advantage 1000 Respirator, black

817040

Ultra-Twin/Ultravue
Ultra-Twin/Ultravue

Description

Part No.

Spectacle Kit for Ultra-Twin/Ultravue 454819

QuikChek II Fit-Test Adapter for Ultra-Twin Respirator

812022

QuikChek II Replacement Kit with 25 ft of sampling tubing and 25 connectors, clips, and suction cups

803196

QuikChek IV Adapter for Ultravue/Ultra Elite facepieces with a 1/4-tum quick disconnect, comes with Type H cartridge 817446
Twin-Cartridge Adapter for Ultravue Facepieces 803622
Cover Lens, clear, 25/box 456975
Nosecup, black, small 813138
Nosecup, black, medium 813139

Nosecup, black, large

813140

Black plastic carrying/storage case

D2056734

Ultra Elite Accessories
Ultra Elite
Description Part No.
Spectacle Kit for Ultra Elite Respirator, side wire support 804638
Spectacle Kit for Ultra Elite Respirator, center support 493581

QuikChek III Fit-Test Adapter for Ultra Elite Respirators

805078

QuikChek IV Adapter for Ultravue/Ultra Elite facepieces with a 1 /4-turn quick disconnect, comes with Type H cartridge 817446
Twin-Cartridge Adapter for Ultra Elite Facepieces 803622
Cover Lens, clear, 25/box 491500

Black plastic carrying/storage case

D2056734


Chin-Type Gas Masks
Chin-Type Gas Mask
The Chin-Type Gas Mask is a protective system consisting of a full facepiece and canister. The small, round plastic canister attaches directly to the facepiece. The system is designed to permit downward head movement.
The Chin-Type Gas Mask is designed for respiratory protection against a specific gas or group of gases as indicated by canister identification. See the canister table for specific canister approvals. From a practical standpoint, gas masks are generally suitable for ventilated areas with relatively stable contaminant concentration levels. They should never be used in confined spaces or where oxygen deficiency and high gaseous concentrations may occur. Gas masks may also be used for escape only from atmospheres in which the contaminant concentration does not exceed the maximum use condition of the gas mask.
Facepieces
Whether you choose the Advantage 4000, Advantage 3100, Ultravue or Ultra Elite facepiece, all four are available in three sizes to accommodate a wide range of users. The Advantage 3100 facepiece has a silicone rubber facepiece, while the Advantage 4000, Ultravue and Ultra Elite facepieces are available in a choice of silicone or Hycar rubber. All have a scratch-resistant polycarbonate lens that provides a wide field of vision. Optional lens cover accessories provide even greater scratch resistance. All four facepieces feature a
nosecup that helps reduce lens fogging in low temperature conditions or in high-humidity conditions.
Belt-Mounted Version
The belt-mounted version of the Chin-Type Gas Mask allows the wearer to mount the chin-style canister on a support belt. This shifts the weight of the canister to the hip, providing greater comfort for some wearers. The belt-mounted version is also recommended for welding or grinding operations, as the canister can be positioned away from sparks or molten metal. An optional spark cover is available to protect canister from spark damage. The additional parts needed are listed below. See previous page for Welders Adapters, lenses and protective hood.
Chin Type Gas Masks
Chin Type Gas Mask with Belt Mounted Cartridge

Gas Mask Facepieces
  Advantage 4100 Facepiece (also requires RD40 Canister Adapter P/N10065330)
Material Small Medium Large
Black silicone, with net head harness 10083796 10083792 10083800
Black Hycar, with net head harness 10083797 10083793 10083801
  Advantage 3100 Single-Port Respirator Facepiece
Harness Small Medium Large
with Rubber Harness 10028999 10028998 10029000
with Advantage Harness 10031343 10031342 10031344
  Ultravue Facepiece Ultra Elite Facepiece

Material

Small

Medium

Large

Small

Medium

Large

Black Silicone

480251

1480247

480255

493072

493028

493116

Black Hycar

471218

1457126

471230

493064

493020

493108

Replacement Canisters for Chin-Type Gas Masks

MSA Canister Identification

Purifying Protection Code

Approval

Maximum Use Conditions

Gas/Vapors

Part No.

% Volume

PPM

Phosphine/Ammonia/Chlorine/P100

PH/AM/CL

TC-14G-0274

0.50%

5000

Ammonia and Chlorine* Phosphine*

10059903

0.15%

1500

Organic Vapor/P100

OV

TC-14G-0279

0.50%

5000

Organic Vapors, also effective against organic iodides and iodide vapors*

10067469

Hydrogen Fluoride/P100

HF

TC-14G-0280

0.10%

1000

Hydrogen Fluoride*

10067491

Formaldehyde Acid Gas/ Chlorine Dioxide/Escape from Hydrogen Sulfide/P100

FM/AG/CD/HS

TC-14G-0282

0.05%

500

Formaldehyde*
Acid Gases and Hydrogen Sulfide*
Chlorine Dioxide*

10067470

0.50%

5000

0.10%

1000

*Canister contains a P100 Particulate Filter (9997% filter efficiency level) effective against all particulate aerosols.

Additional Parts for Belt Mounting

Belt-Mounted Version
The belt-mounted version of the Chin-Type Gas Mask allows the wearer to mount the chin-style canister on a support belt. This shifts the weight of the canister to the hip, providing greater comfort for some wearers. The belt-mounted version is also recommended for welding or grinding operations, as the canister can be positioned away from sparks or molten metal. An optional spark cover is available to protect canister from spark damage. The additional parts needed are listed below.

Belt Clip

10068195

Breathing Tube

10068129

PVC Belt

473902

Web Support Belt, uncoated

9961

Polyurethane-coated Nylon Support Belt

492827

Spark Cover

10068152

Storage Cases for Chin-Type Gas Mask

MSA Canister Identification

Part No.

Phosphine/Ammonia/Chlorine/P100

10075204

Organic Vapor/P100

10075207

Hydrogen Fluoride/P100

10075205

Formaldehyde Acid Gas/Chlorine Dioxide/ Escape from Hydrogen Sulfide/P100

10075206

Wall bracket

10071231

Storage Case for Chin Type Gas Masks


Respirators for Riot Control
Millennium Riot Control Gas Mask Advantage 1000 Riot Control Gas Mask

The Millennium Riot Control Mask and the Advantage 10000 Riot Control Masks are NIOSH-approved for protection against CN and CS Riot Control Agents, and P100 particulate efficiency level.

Millennium® Riot Control Gas Mask
A Hycar version of the reliable military-style gas mask (MCU-2/P Mask, used by the U.S. Air Force in Desert Storm) that combines high performance, customized fit, comfort, and cost efficiency.

  • Flexible, l-piece polyurethane lens with wide field of vision is bonded to durable Hycar rubber facepiece
  • Dual-canister mount (NATO 40mm thread) allows weapon sighting from either shoulder
  • Drinking tube provides connection for fluid ingestion in contaminated atmospheres
  • Fully elastic, 6-point head harness promotes easy on/off, easy adjustment, no hair pulling
  • Internal nosecup with 2 check valves deflects air from the lens, reduces fogging
  • Standard mechanical speaking diaphragm included, or add MSA's optional ESP@ II Communications System
  • NIOSH -approved (No. TC-14G-0254) for protection against chloroacetophenone (CN), chlorobenzylidene (CS), P100 particulate efficiency level, and particulates

Advantage® 1000 Riot Control Gas Mask
A clean, simplified respirator with Hycar facepiece (based on a proven facepiece design developed for the U.S. Armed Forces) that's up to 40% lighter than conventional full-face respirators and gives high performance, customized fit, comfort, economy, and user acceptance.

  • Flexible, l-piece polyurethane lens with wide field of vision is bonded to durable Hycar rubber facepiece
  • Dual-canister mount (bayonet mount) allows weapon sighting from either shoulder
  • Fully elastic, 6-point head harness promotes easy on/off, easy adjustment, no hair pulling
  • Standard nosecup helps eliminate lens fogging
  • Standard mechanical speaking diaphragm included, or add MSA's optional ESP II Communications System
  • NIOSH-approved (No. TC-14G-0235) for protection against chloroacetophenone (CN), chlorobenzylidene (CS), PlOO particulate efficiency level, and particulates

Riot Control Gas Masks
Millennium Riot Control Gas Mask with nosecup, drinking tube, and clear polycarbonate outsert. Order canisters separately.

Small

10051286

Medium

10051287

Large

10051288

Millennium Riot Control Canisters

Millennium RC Canisters, box of 6

818264

Advantage 1000 Riot Control Gas Mask complete with canister, nosecup, and identification tag.

Small

813860

Medium

813859

Large

813861

Advantage 1000 Riot Control Canisters
Advantage 1000 RC Canisters, box of 6 817590

Millennium and Advantage Accessories

The ESP II Communications System, a 1-piece, self-contained, electronic speech projection device, allows wearers to speak normally, yet be heard loud and clear.

ESP Communications System for Millennium and Advantage 1000 Facepieces (less battery)

10026265

Lens Outsert

Polycarbonate lens outsert snaps into place over Millennium or Advantage 1000 facepiece lens, providing additional impact protection. Tinted outsert helps conceal identity (suitable only when sufficient light exists).

For Millennium Facepiece

Small

Medium/Large

Clear lens outsert

10008907

10008906

Tinted lens outsert

10008909

10008908

For Advantage 1000 Facepiece

Small

Medium/Large

Clear

806463

806462

Tinted

806465

806464

Other Accessories

Gas Mask Pouch, Military Style

10034184

Black Nylon Bag

817040

Advantage 1000/Millennium Spectacle Kit

816137

Butyl-Coated Nylon Hood

305022


Respirators for Homeland Security

Millennium® CBRN Gas Mask The new NIOSH government CBRN standard for full-facepiece gas masks was issued on March 7, 2003. After extensive testing to that standard, MSA's Millennium CBRN Gas Mask was first to receive NIOSH certification as "compliant against CBRN".
A Hycar version of the reliable military-style gas mask (MCU-2/P Mask, used by U.S. Air Force in Desert Storm) that combines high performance, customized fit, comfort and cost efficiency.

  • Flexible, l-piece polyurethane lens with wide field of vision is bonded to durable Hycar rubber face piece.
  • Dual-canister mount allows weapon sighting from either shoulder
  • Drinking tube provides connection for fluid ingestion in contaminated atmospheres
  • Fully elastic, 6-point head harness promotes easy on/off and adjustment, with no hair pulling
  • Internal nose cup with 2 check valves, deflects air from the lens, reduces fogging
  • CBRN canister containing chemical sorbents and a P100 filter to attract, retain and neutralize contaminants
  • Standard mechanical speaking diaphragm included, or add MSA's optional ESP® II Communications System
  • Optional butyl-coated nylon hood for total head protection
  • NIOSH-approved (No. TC-14G-0270) for protection at a CBRN Cap 1 rating

Ultra Elite® CBRN Gas Mask
Safety

  • Super-soft black Hycar rubber exceeds the CBRN permeation requirements
  • Large lens with 83% unimpeded vision
  • Centrally located inlet port for secure, comfortable fit and feel
  • Centrally located mechanical speaking diaphragm for clear communications
  • Optional ClearCommand® Amplifier for increased communication capabilities

Simplicity

  • Available with a 5-point rubber or SpeeD-ON® head harness
  • Identical sealing surfaces for both SCBA and Gas Mask facepieces­eliminating the need for redundant fit testing
  • Simplified respiratory protection training program

Reliability

  • The Ultra Elite facepiece is fire-service proven, with over a decade of trusted use
  • MSA has been making gas masks since World War I
  • Largest supplier of gas masks to the law enforcement market

Millennium CBRN Gas Mask
Millennium CBRN Gas Mask

Millennium CBRN Gas Mask With nosecup, drinking tube, and clear polycarbonate outsert. Order canister separately.

Small

10051286

Medium

10051287

Large

10051288

Millennium CBRN Canister

MSA CBRN Canister

10046570

Ultra Elite CBRN Gas Mask

Ultra Elite CBRN Gas Mask

Ultra Elite CBRN Gas Mask

Size

with rubber Head Harness

with SpeeD-On Head Harness

Small

10052776

10052780

Medium

10052781

10052779

Large

10052778

10052777

Canisters & Cartridges MSA CBRN Canister

10046570


Responder CBRN PAPR
Responder CBRN PAPR

A belt-mounted powered air-purifying respirator with choice of 2 proven tight-fitting facepieces in 3 sizes. The motor/blower provides constant air flow of a minimum 115 lpm to the facepiece via the breathing tube. Can be used with CBRN cartridge or with the OptiFilter XL or PAPR GME Multigas HE cartridge for tactical operations.

  • Protects wearers for up to 8 hours under many hazardous conditions
  • First CBRN-approved PAPR with a tight-fitting facepiece
  • Choice of 2 proven positive-pressure facepieces, the MSA Millennium and the MSA Ultra Elite
  • Choice of CBRN cartridge or mUlti-gas / particulate chemical cartridges for non-CBRN use

MSA's Responder CBRN PAPR system is ideal for military and special operations personnel who need non-IDLH respiratory protection for an extended period of time. Industry trusted, with over 50,000 C420's fielded in various U.S. military programs, the C420 Motor-Blower is ideal for filtering contaminants from ambient air and providing a constant airflow of at least 115 lpm to the user's face piece, providing a twenty times greater OSHA assigned protection factor than APR, due to positive pressure in the mask. The C420 is available with 2 batteries that have the ability to be "hot-swapped" during warm environment use. The Lithium-Sulfur Dioxide mission battery has an 8 hour run-time. The Nickel Metal Hydride rechargeable battery has a 4 hour run-time. The motor / blower will not interfere with radio communications as it is EMI shielded to MIL-STD-461C. The C420 comes complete with the motor-blower, belt, airflow indicator and breathing tube.

Responder CBRN PAPR Complete Systems

You must choose C420 PAPR Kit, face piece, and cartridge for complete system C420 PAPR Kits (less facepiece and cartridge)

Part No.

Description

B-60141-030

C420 PAPR Kit with 30" Breathing Tube

B-60141-036

C420 PAPR Kit with 36" Breathing Tube

Gas Mask Facepieces with Head Harness (less cartridge)

Facepiece

Material

Head Harness

Size

Small

Medium

large

Millennium

Hycar

6-point elastic

10051286

10051287

10051288

Ultra Elite

Hycar

rubber

10052776

10052781

10052778

Ultra Elite

Hycar

SpeeD-ON

10052780

10052779

10052777

Cartridges

Part No.

Description

10046570

PAPR Responder* cartridge, each

496081

OptiFilter XL cartridge, 6 pack

10072237

PAPR GME Multigas HE cartridge, each

*Designed to meet new NIOSH CBRN PAPR Requirements.

Accessories for Responder PAPR

Part No.

Description

B-20040-001

NiMH Rechargeable Kit (2 NiMH Batteries, Charger & Cap)

S-20036

NiMH Rechargeable Battery Pack

B-20090-001

NiMH Rapid Battery Charger

M-20020

LiSO2 Mission Battery

B-30060-001

NiMH Rechargeable Battery Cap Assembly

S-30019

Web Belt Assembly

B-1 0079-001

PAPR Carrying Case

OptimAir 6HC PAPR - For Health Care Responders
OptimAir 6HC PAPR

The OptimAir 6HC PAPR (Health Care Powered Air-Purifying Respirator) from MSA is specifically designed to protect health care professionals from residual Chemical/Biological/Radiological Agents, when they are performing First Responder duties during Homeland Security or terrorist situations. The system features a lightweight, chemical­resistant Tychem SL Hood and belt-mounted blower with two HC Cartridges. The canisters contain a pleated high-efficiency (P100) filter to remove aerosols, radionuclides, and solid particulates; and an impregnated activated carbon bed to adsorb (filter out) gases and vapors. The carbon bed is the same as used in military canisters and is effective against mustard (HD), Sarin (GB), DMMP (a Sarin simulant), HCN, and CK.

  • Designed specifically for use by ER and other health care providers during Homeland Security situations.
  • Continuous air flow meets or exceeds NIOSH standard
  • Entire lightweight PAPR weighs under 6 pounds
  • Available with Tychem SL Hood or Advantage 3100 Facepiece.
  • Tychem SL hood weighs only 8 ounces.
  • Hood is compatibly worn with facial hair and glasses
  • No fit testing necessary when using hood
  • Design allows freedom of movement plus optimum protection
  • Tychem SL hood and Advantage 3100 face piece are comfortable, easy to don and use
  • Lithium battery provides 1 O-year shelf life, 4 hours of wear time
  • Approved for High Efficiency, Chlorine, Sulfur Dioxide, Hydrogen Chloride, Hydrogen Fluoride, Hydrogen Sulfide (escape only)
  • NIOSH approval TC-23C-2201 with Tychem Hood
  • NIOSH approval TC-23C-2209 with Advantage 3100 Facepiece

OptimAir 6HC PAPR with Tychem Hood Includes motor/blower module, lithium battery, breathing tube, belt and 2 HC Cartridges

10041550

OptimAir 6HC PAPR with Advantage 3100 Facepiece Includes motor/blower module, lithium battery, breathing tube, belt and 2 HC Cartridges

10045100

Accessories and Replacement Parts

HC Cartridges, Pkg. of 6

10042448

Tychem SL Hood

10048179

Breathing Tube for Hood

481980

Single-use lithium battery

10048180

NiCd Battery for training use

491120

Single-Unit Single-Rate Battery Charger for NiCd Battery

463471

Motor/Blower module

10048178

Polyurethane-coated nylon belt

492827

Flow Check Meter

487995

Adapter for Flow Check Meter for use with Hood

489999

Butyl Hood

305022


Safe Escape CBRN 15-Minute Escape Respirator
Safe Escape CBRN 15 Minute Escape Respirator Safe Escape Respirator Case

When escaping from CBRN agents, every second counts. Depend on the Safe Escape Hood from MSA. The hood gives your employees the protection they need to escape from a terrorist situation safely, quickly and easily - whether they work in high-profile office environments, for government agencies or embassies, or as law enforcement or first responders. The MSA Safe Escape Hood is the equipment of choice for today's diverse workforce.
Engineered for Maximum Performance
Manufactured with a high-performance laminate material, the hood is designed to provide you with the latest in head and neck coverage with respiratory protection against CBRN agents. The soft, high-stretch rubber neck seal conforms to irregular neck contours, allowing a secure fit on a wide variety of users. Its unique sized nosecup helps reduce lens fogging and carbon dioxide buildup by directing airflow inside the hood. The Safe Escape Hood canister features a high-efficiency particulate filter and activated carbon to combat aerosols, gasses and vapors. In fact, the canister used in the hood contains 50% more carbon than similar canisters used by the U.S. military. Furthermore, MSA has performed extensive testing on the Safe Escape Hood against both simulated and live chemical agents beyond what is tested by NIOSH.
Designed for Comfort
In addition to designing the hood for maximum protection, MSA also took into account the comfort factor. A user who is potentially under stress requires ease of donning and use. The large lens and translucent hood allow better visibility, face recognition and help reduce claustrophobia. The nose cup allows communication superior to that of conventional devices, which require wearers to breathe through a mouth bit. With the integrated nose cup, wearers can breathe and speak normally to provide potentially life-saving communications. The hood also features cradle-type self-adjusting head straps that allow for quick, no assistance donning in the event of an emergency.

Safe Escape Respirator in Hextreme Case, Standard Universal Size

10073702

Safe Escape Respirator in Hextreme Case, Tactical Version Universal Size

10073923

Trainer Version of Safe Escape Respirator Universal Size

10073703

Accessories

Safe Escape Respirator Sizing Kit

10066681

Optional carrying straps and harness kit

10068310

DVD Training video for Safe Escape Respirator

10068013

Note: The only difference between the standard and tactical versions is the outside labeling on Hextreme Case.

WSP home page Products page Suppliers page  
  MSA Index Previous MSA Page Next MSA Page