Sure-Climb™ Temporary Cable System
The Sure-Climb Temporary Ladder Cable System is designed to provide fall protection when climbing or descending ladders or vertical structures up to 300' in height. Applications include telecommunications towers, light poles, water towers, hydroelectric towers, stacks, and any other climbable structure. The Sure-Climb temporary system:

• Is available in 2 versions; with an integral shock absorber, or with an energy-absorbing top mounting bracket
• Allows for quick and easy attachment to approved ladder or structure
• Includes an integral, adjustable line weight
• Uses a stainless steel fall arrester (ordered separately)
• Uses a 5/16" galvanized steel cable
• Meets all applicable OSHA regulations and ANSI standards
• CSA certified

All Sure-Climb systems include: anchor bracket, anchor shackle, cable guides, wire rope clips, turnbuckle, and cable. Fall Arrester must be ordered separately.

Part No.

Description

SFPLS353050

Sure-Climb System with integral shock absorber, 50 ft (16 m)

SFPLS353100

Sure-Climb System with integral shock absorber, 100 ft (30 m)

10040010

Sure-Climb Slider (fall arrester) with carabiner

Sure-Climb™ Permanent Cable System
The Sure-Climb Permanent Ladder Cable System is designed to provide fall protection when climbing or descending ladders or vertical structures up to 300' in height. Applications include telecommunications towers, light poles, water towers, hydroelectric towers, stacks, and any other climbable structure. The Sure-Climb permanent system:

• Includes energy-absorbing, galvanized steel top and bottom mounting brackets
• Uses a 5/16" galvanized steel cable
• Incorporates cable guides to minimize cable vibration and wear
• Uses a stainless steel fall arrester (ordered separately)
• Meets all applicable OSHA regulations and ANSI standards
• CSA certified

All Sure-Climb systems include: anchor bracket, anchor shackle, cable guides, wire rope clips, turnbuckle, and cable. Fall Arrester must be ordered separately.

Part No.

Description

SFPLS350050

Sure-Climb System 50 ft (16 m)

SFPLS3501 00

Sure-Climb System 100 ft (30 m)

10040010

Sure-Climb Slider Hall arrester) with carabiner

Dyna-Glide® Climbing Protection System
The Dyna-Glide Climbing Protection Systems are used to prevent and/or arrest falls from heights and also enhance the way a climber is able to perform the necessary work. Our systems can be mounted to already-installed ladders, to corners of lattice towers, and to almost any other suitably strong structure your crew needs to climb.
Whatever configuration works for you, the Dyna-Glide System:

• Limits total fall distance to inches
• Offers components for complete rescue systems
• Allows for vertical and horizontal mobility
• Uses galvanized or stainless steel for corrosion resistance
• Offers your choice of Ladder Rail Combination (LRC) or Rail only
• Provides smooth travel- there's no binding ofthe fall arrester inside the rail
• Uses detachable, lightweight, stainless steel and aluminum mechanism for hands-free ascent and descent
• Is CSA certified

Taken together, the Dyna-Glide System is designed to be installed without modification to the structure and can be assembled with simple hand tools.

LRC Combination Part No. 506390

• Rungs incorporate skid resistant surface
• Can be curved or bent for your specific application
• Constructed of galvanized steel
• Standard length: T 4-3/16"
• Standard width: 18"

Fall Arrester Part No. 506277

• Mechanical locking mechanism to reduce fall distance
• Permits hands-free ascent and descent
• Constructed of aluminum and stainless steel
• Carabiner not included

Part No.

CSA Part No.

Description

506270

--

Straight Notched Rail, galvanized, standard length T 4-3/16"

506273

--

Rung Mount Assembly, galvanized

506274

--

Gated top end stop, stainless steel

506275

--

Gated bottom end stop, stainless steel

506277

415752

Fall arrester

506282

--

Mounting base angle corner, galvanized

506283

--

Mounting angle corner, galvanized

506312

--

Ungated top end stop, stainless steel

506329

--

Rail connector, galvanized

506388

--

Ladder/Rail Combination (LRC) standoff bracket, galvanized, standard length T 4-3/16"

506389

--

LRC standoff bracket, bottom, galvanized

506390

10006461

LRC, galvanized

506391

--

LRC side rail connector, galvanized

Temporary Synthetic Horizontal Lifelines
Designed for easy installation and removal, these temporary horizontal lifeline systems were created for a wide range of applications, The system may be mounted to any suitable 5,000 lb-rated anchorage, Both systems can be rigged using many standard components, reducing the need for special or "engineered" equipment.

• Highly visible 12-strand red rope will not hackle and minimizes fall distance due to its low stretch properties.
• Available in a Single-Worker or Two-Worker system.
• Available in lengths up to 200 ft, System comes in a handy bucket for lengths up to 60 ft.
• Meets all OSHA requirements and ANSI A10.32 standards.

• Includes integral energy absorber
• 5/8" black nylon kernmantle rope
• Available in lengths up to 60 ft
• Rated for two workers
• Includes 2 cable anchor slings
• Includes storage bag

Part No,

Description

10013150

Dyna-Line Temporary Horizontal Lifeline for single worker, 30 ft rope

10013151

Dyna-Line Temporary Horizontal Lifeline for single worker, 60 ft rope

10013152

Dyna-Line Temporary Horizontal Lifeline for two workers, 30 ft rope*

10013153

Dyna-Line Temporary Horizontal Lifeline for two workers, 60 ft rope*

SHL1009035BLK

Sure-Line Temporary Horizontal Lifeline, 35 ft black rope

SHL1009060BLK

Sure-Line Temporary Horizontal Lifeline, 60 ft black rope

Dyna-Line Rope HLL Minimum Clearance

line

l-Worker System

2-Worker System

Length

6' Lanyard

SRL

6' Lanyard

SRL

10 ft

14'10"

12'5"

15'10"

13'2"

20 ft

15'9"

13'8"

17'2"

14'9"

30 It

16'10"

15'1"

19'4"

16'6"

40 ft

18'0"

16'4"

21'4"

18'3"

50 ft

19'3"

17'6"

23'2"

20'1"

60 It

20'6"

18'9"

25'1"

22'

Clearances based on Lifeline 4' above working surface

Sure-Line Rope HLL Minimum Clearance

line

l-Worker System

2-Worker System

Length

6' Lanyard

SRL

6' Lanyard

SRL

10 ft

14'3"

12'5"

14'7"

13'2"

20 ft

15'6"

139"

17'

15'

30 ft

17'1"

15'2"

19'4"

16'7"

40 ft

18'6"

16'5"

21'8"

18'4"

50 ft

20'

17'8"

24'2"

20'3"

60 ft

21'5"

19'1"

26'

22'2"

Clearances based on Lifeline 4' above working surface

Sure-Line™ Temporary Horizontal Lifelines
The Sure-Line temporary Horizontal Lifeline is a lightweight cable system that is suspended between two approved anchor points to provide worker fall protection during horizontal movement. Designed for quick and easy installation at temporary work sites, the Sure-Line system:

• Includes an integral shock absorber
• Available in 20-ft, 40-ft, or 60-ft lengths
• Uses a 3/8", 6x36 galvanized cable'
  
• Available in 2 models, with or without turnbuckle
• Rated for up to 2 people
• Incorporates a combination clamp/thimble that allows for effortless tensioning of lifeline

Part No,

Description

SHL2009040

Steel Cable Horizontal Lifeline System with turnbuckle, 40 ft (12 m)

SHL2009060

Steel Cable Horizontal Lifeline System with turnbuckle, 60 ft (18 m)

SHL2009040lW

Iron Worker Cable Horizontal Lifeline System without turnbuckle, 40 ft (12 m)

SHL20090601W

Iron Worker Cable Horizontal Lifeline System without turnbuckle, 60 ft (18 m)

Sure-Line Rope HLL Minimum Clearance

Line

l-Worker System

2-Worker System

Length

6' Lanyard

SRL

6' Lanyard

SRL

10 ft

14'1"

12'2"

14'6"

13'2"

20 ft

15'1"

13'1"

16'7"

14'8"

30 ft

16'2"

14'

19'

16'4"

40 ft

17'3"

14'9"

21'

18'

50 ft

18'4"

15'7"

22'7"

19'6"

60 ft

19'5"

16'5"

24'3"

21'4"

SkyLink™ HLL STANCHION

• Economical
• Accommodates two workers per system
• Lightweight - weighs only 21 pounds, making it easily installed, removed, and handled by 1 person
• Only a 24-hour cure time required for pour-in-place Pigtail anchor (min. 3,000 psi concrete). so you won't hold up a job or slow down your crew.
• No tools required for installation when using pour-in-place anchor, making it easy to install- sets up in minutes!
• Can be used as single point anchor attachment, providing fall protection for workers while installing horizontal lifelines
• Offers two installation methods to concrete, a pour-in-place anchor for new construction or concrete expansion bolts for existing construction, providing versatility to meet the requirements of your application
• Aluminum and steel construction increases durability to ensure long service life
• Folding leg stanchion design makes the stanchion easy to carry and convenient to store
• No tie-back line required reduces trip hazards
• Meets ANSI A10.32 and OSHA requirements

Part No.

Description

10055659

Skylink Stanchion, Standard model - 44" height (pour-in-place Pigtail or concrete expansion anchors must be ordered separately)

10055660

Skylink Stanchion, SL model - 23" height (pour-in-place Pigtail or concrete expansion anchors must be ordered separately)

10055721

3.25" concrete expansion anchor with nut and washer

10059805

0.5" x 12" pour in place "Pigtail" anchor with washer and vinyl cap

10059806

Skylink Stanchion Kit including 2 - Standard stanchions with 60' 2- worker Dyna-Line 10013151 (without anchor straps) and 4 Pigtail anchors

10059807

Skylink Stanchion Kit including 2 - Standard stanchions with 60' Sure-Line for Iron Workers (pin SHL20090601W). and 4 Pigtail anchors

10059808

Skylink Stanchion Kit including 2 - SL stanchions with 60' 2- worker Dyna-Line (pin 10013153 - without anchor straps) and 4 Pigtail anchors

10059809

Skylink Stanchion Kit including 2 - SL stanchions with 60' Sure-Line for Iron Workers (pin SHL20090601W). and 4 Pigtail anchors

The D6 HLL Stanchion is an anchorage connector used for the installation of horizontal lifeline systems. Designed with a jaw clamp screw, D6 HLL Stanchions are easily installed on steel girders or base plates fitted to bridge rail ties to provide a strong stable connection point for the approved horizontal lifeline system. The D6 HLL Stanchions can be used as the end or intermediate connection points for either a single or mUlti-span horizontal lifeline system.
Anchorage Bracket Also Features:

• Engineered A-frame design
• Constructed of galvanized steel
• Jaw clamp screw allows for quick & easy installation
• Collapsible A-frame for easy transport & storage
• Meets all applicable OSHA regulations & ANSI standards

The MSA Horizon Horizontal Lifeline anchorage connecting system is designed for portability, versatility, ease of installation, and ease of use.
The system may be mounted to existing overhead steel beams or to newly constructed steel structure where overhead anchorage points are not available. Horizontal travel through intermediate supports is achieved without disconnection of the worker's personal fall arrest system. The system may accommodate up to five persons. The unique shock absorber reduces dynamic forces transmitted to the anchorage points. Stanchion system may be installed on the top or bottom flange of an I-beam. Typical applications include new construction (steel erection), inspection and maintenance operations, loading bays, bridges, overpasses, aircraft hangars, manufacturing, petrochemical, chemical, and food processing plants. Meets OSHA requirements.

Basic Below Beam Mount Sub-System
Parts required for this system: 3 Beamgrips (Part No. depends on size of beam flange); 1 - 415836; 1 - 506648 (30'); 1 - 506636; 1 - 506563; 1 - 506662; 2 - 506637

Part No.

Description

506682

Beamgrip for beams with flange width: 3.94" to 5.64", flange thickness: .205" to .659"

415171

Beamgrip for beams with flange width: 5.525" to 8.07", flange thickness: .36" to 1.09"

415172

Beamgrip for beams with flange width: 8.06" to 10.475", flange thickness: .56" to .935"

415173

Beamgrip for beams with flange width: 10.265" to 12.8", flange thickness: .605" to 1.25"

415836

Horizontal lifeline shock absorber

506563

3/8" open wedge socket

506636

Beamgrip bypass fitting

506637

Beamgrip end fitting

506648

3/8" wire rope, galvanized, length must be specified at the time of order

506662

12" turn buckle with plate

506663

Snatch block pulley for 3/8" wire rope

506254

for 1/2" wire rope

506255

for 5/8" wire rope

OSHA regulations state "Horizontal Lifeline Systems shall be designed, installed and used under supervision of a qualified person, as part of a complete fall arrest system, which maintains a safety factor of at least two." A qualified person is defined as "one with a recognized degree or professional certificate and/or extensive knowledge and experience in the subject field, who is capable of design, analysis, evaluation and specifications in the subject work, project or product." MSA can provide a qualified person to design and install a Horizontal Lifeline System.