Escort ELF Sampling Pumps
The patented Escort ELF Sampling Pump can be used for personal and area sampling. The state-of-the-art electronic laminar flow sensor, consisting of a laminar flow element and pressure sensor, provides constant flow (volume) control, with ± 2.5% regulation of flow rate (from 1 to 3 Ipm) and automatic compensation for changes in battery voltage, temperature, altitude, and sample load. An internal secondary standard calibrates the pump continuously and needs to be checked against a primary standard only once a month (or every 200 hours for coal mine dust sampling).

Escort ELF Sampling Pumps are UL approved as intrinsically safe for use in hazardous locations-Class 1, Groups A, B, C, D; Class II, Groups E, F, and G; and Class III, Division I locations. NIOSH-certified for coal mine dust sampling (TC-74-030). MSHA certified as intrinsically safe for underground use (Approval No. 2G-3924-1 ).

Escort LC Sampling Pumps
The Escort LC Sampling Pump can be used with a variety of personal and area sampling devices to collect such airborne contaminants as asbestos fibers, toxic gases, vapors, particulates, fumes, and mists. It can also be used to sample silica dust, coal dust, and organic vapors. The Escort pump is exceptionally compact, lightweight, and quiet in operation. Engineered for use in "hostile" environments, the unit can be sprayed with water while it is operating without being damaged.

Escort LC Sampling Pumps are UL approved as intrinsically safe for use in hazardous locations-Class I, Groups A, B, C, D; Class II, Groups E, F, and G; and Class III, Division I locations.

MSA Sampling Pump Accessories
MSA sampling pump accessories and air sampling equiment allow monitoring of many different contaminants in various applications. Sampling pump accessories can be used in personal and area sampling for a wide variety of airborne contaminants such as asbestos fibers, toxic gases, vapors, particulates, mists, and fumes. Accessories for MSA sampling pumps include filter media, a cyclone assembly, preweighed filter cassettes, filter holder assemblies, impingers, the Gemini® Twin-Port Sampler, sorbent tubes, and calibrators.

Escort ELF Pump with flow fault indicator, 110V single-unit charger, Gemini® Twin Port Sampler, and standard packaging

805559

Escort ELF Pump with flow fault indicator, 110V single-unit charger, sampling line, and standard packaging

805560

Escort LC Pump with 110V single-unit charger, sampling line and standard packaging

711400

Replacement Parts and Accessories

Battery Pack with O-ring

497702

One Replacement Inlet Water Stop Filter

802897

Escort Pump Overhaul Kit-common components for routine maintenance

802922

Inlet Dust Filter (pkg of 5)

808935

Battery Chargers-MSA Omega® Chargers

120 VAC 50/60 Hz

494716

220 VAC 50/60 Hz

495965

120/240 VAC 50/60 Hz (five-unit)

801759

Sampling Equipment

Sampling line only

456226

10mm Cyclone Assembly to separate respirable dust from non-respirable dust

456243

Gemini Twin-Port Sampler for sorbent tubes

497697

10mm Cyclone Assembly to separate respirable dust from non-respirable dust, for use with 37 mm non-MSA cassettes

10044015

Carrying Accessories-Jacket

Leather jacket

811741

The NIOSH respirator certification standard, 42 CFR Part 84, has introduced new ways to select non-powered air-purifying particulate filter respirators, One ofthe primary concerns ofthe standard is oil-mist exposure, According to this NIOSH standard, there are 3 levels of respiratory protection: N = Not resistant to oil; R = Resistant to oil; P = Oil-Proof. But how do you know whether oil mist is present in the workplace? MSA's 42 CFR Sampling Pump Kits can help you answer this question by providing convenience and flexibility in oil-mist sampling.
Kit includes:

• Sampling Pump (Escort ELF or LC)
• 3-piece 37-mm MCE filter cassette, 0,8 micron pore size, 10 filters per kit
• 110V charger
• Sampling line
• Garment clip
• Instruction manual

Escort ELF 42 CFR Sampling Pump Kit

General Purpose Cassette

Sorbent Tube Sampling

Gemini Twin-Port Sampling Kit-includes Gemini Sampler, tube protectors, V-connector, clips and carrying case

497697

Charcoal Sampling Tubes (150mg), 50 tubes

697169

Charcoal Sampling Tubes (600mg). 50 tubes

697170

Silica Tubes (225 mg). 50 tubes

697171

Silica Tubes (600 mg). 50 tubes

697172

Amberlite XAD-2, 50 tubes

697175

Hopcalite, 50 tubes

697176

Carbotrap, 25 tubes

697174

Carbosieve, 25 tubes

697173

Tenax/CMS

491165

Cassette Sampling General Purpose Filter Cassettes Fifty complete 3-piece preloaded filter cassettes with MCE filters

With 25mm, 0.8-µ pore size

695677

With 37mm, 0.8-µ pore size

695676

Filter Discs for Nuisance Dust Sampling Used with 37mm cassettes.

PVC, 0.5-µ pore size, 50/pack

459733

PVC, 0.8-µ pore size, 50/pack

812805

PVC, 5.0-µ pore size, 50/pack

625413

Glass Fiber

463784

MCE Filter Discs for Asbestos and Nuisance Dust

25mm, 0.8-µ pore size, 100/pack

695674

37mm, 0.8-µ pore size, 50/pack

463797

37mm, 0.45-µ pore size, 50/pack

463796

Silver Membrane Filters for Silica, Coke Oven Emissions & Carbon Black

Silver Membrane, 0.8-µ pore size, 50/pack

464324

Asbestos Sampling Filter Cassette All units include 50 complete filter cassettes pre loaded with 25mm MCE filters.

With 0.8-µ pore size and 50mm anti-static cowl

695679

With 0.45-µ pore size and 5.0-µ pore size and 50mm anti-static cowl

696172

Coal Dust and Silica Filter Cassette

Preweighed filter cassette with 5-µ pore size PVC filter and Mine Data Card - Coal Dust

803462

Preweighed filter cassette with 5-µ pore size PVC filter and Data Card - Silica

711361

Respirable Dust Sampling w/Cyclone Assembly

10mm Cyclone Assembly, used with MSHA pre-weighed cassettes

456243

10mm Cyclone Assembly, IH version used with 37mm cassettes

10044015

Gas Sampling Bags

Teflon Sample Bag Assembly

1471677

Tedlar Sample Bag Assembly

1472992

Miscellaneous Accessories
MSA's complete line allows users to load sampling cassette cases and select your own combinations of sampling media. Your MSA distributor can help you select the accessories that best suit your application requirements.

Filter Cassette Cases, 2-piece, 25mm, pack of 50

695681

Filter Cassette Cases, 2-piece, 37mm, pack of 12

625412

Filter Cassette Cases, 3-piece, 37mm, pack of 10

449347

50mm-long Cowl for 25mm Filter Cassette Case, pack of 5

695683

25mm Support Pad (felt backup disc). pack of 100

695684

37mm Support Pad (felt backup disc). pack of 25

449375

25mm Cellulose Bands, jar of 60

484683

37mm Cellulose Bands, jar of 60

625415

37mm Stainless Steel Coupler for 3-piece filter cassette case used with Cyclone Assembly

457392

Plastic Coupler for preweighed filter cassette sampling used with Cyclone Assembly

457391

Sampling Line Assembly (used with all pumps and filter cassette cases)

456226

25mm Filter Cassette Case Sampling Line Coupler, package of 10

695685

37mm Filter Cassette Case Sampling Line Coupler, package of 3

459743

Charcoal Filter Tubes-for use in in-line sampling to protect pumps from vapor damage

804403

Supplementary Parts Kit-includes 3 stainless steel support screens, small brush, tweezers, and press/pry tool

456246

All-Glass Impinger Assembly-includes fritted-glass flask, inlet cap, nozzle, and cap

10008396

Bubbler for Fritted-glass Flask

10008397

Flask Holster

10008398

Tubing for Flask

93495

A primary calibration device, the DigiCal™ Calibrator provides instantaneous calibration for instruments like the MSA Escort LC or the secondary flow standard inside the Escort ELF Sampling Pumps. Just press the plunger and the DigiCal Calibrator does the work. Its unique flow cell replaces conventional bubble tubes and makes calibration easier.
The DigiCal Calibrator achieves extreme accuracy by utilizing a computerized flow meter that provides instantaneous flow readouts on a digital display. Accurate measurements are possible within ±0.5 percent at any altitude.

Primary Calibration Devices

DigiCal Calibrator

655101

Air Inlet Caps, pkg of 2

655102

110V Charger with A/C Adapter

655112

Bubble Solution, 4-oz bottle

655273

Sub C Battery Pack

655169

Secondary Calibration Devices

Flowmeter for use with Flow-Lite and Escort Sampling Pumps, 0.2 to 41pm

490197

Flowmeter for use with Flow-Lite and Escort Sampling Pump with Gemini Twin-Port Sampler, 30 to 370 mlpm

490198

MSA's Ventilation Smoke Tube Kits are for use where controlled generation of a visible smoke is desired in order to determine the velocity of slow-moving air currents and establish their direction and flow patterns in shafts, mines and tunnels. They can also be used in commercial buildings and industrial processing plants to determine velocity and flow patterns of heating, ventilating, and air-conditioning systems.

Ventilation Smoke Kit, including aspirator bulb, two rubber plugs, and six smoke-producing tubes contained in plastic carrying case

458481

Ventilation Smoke Kit, including aspirator bulb, six tube caps, and two glass smoke-producing tubes contained in plastic carrying case

5607

Ventilation smoke tubes, box of 12

458480

Glass smoke tubes, box of 10

5645

This MSA/SupeiCo guide to sorbent tube sampling lists MSA part numbers. It is a very comprehensive guide to all types of air sampling using personal sampling pumps.

Extremely Easy to Use

• Standard web browser accessibility for data retrieval and reporting
• Industry-standard memory card available for simple data retention
• System does not require a computer or network interface
• Works without the touch of a single button
• Minimal training needed

Versatile and Expandable

• Up to 10 systems can be interconnected
• Instrument charging option available
• Optional battery pack available for remote use

• Wireless- or wired-network interface available
• Inventive system door also functions as dust cover
• Guaranteed to work in the harshest environments
• In-line gas cylinder holster available; keeps the work area clean and orderly

Value-Driven Performance

• All-inclusive, 2-year warranty
• High quality, cost-effective solution
• Very low total cost of ownership

Solaris
Galaxy Kits

Sirius
Galaxy Kits

Orion
Galaxy Kits

Altair
Galaxy Kits

Orionplu5
Galaxy Kits

Basic Standalone Kit

Basic System

10061051

10061050

10061824

10078252

10082571

Standard Standalone Kit (Includes Regulatorj

Standard System

10061783

10061810

10061825

10078253

10082577

Standard System + Charging

10061784

10061811

10061826

--

10082582

Standard System + Cylinder Holder

10061785

10061812

10061827

10078259

10082585

Standard System + Charging, Cylinder Holder

10061786

10061813

10061828

--

10082592

Smart Standalone Kit (Includes Regulator, Memory Card)

Smart System

10061787

10061814

10061829

10078255

10082580

Smart System + Charging

10061788

10061815

10061830

--

10082583

Smart System + Cylinder Holder

10061789

10061816

10061841

10078256

10082586

Smart System + Charging, Cylinder Holder

10061790

10061817

10061842

--

10082595

Portable Kits** (Includes Regulator, Battery Pack)

Portable System

10061802

10061818

10061843

10078257

10082512

Portable System + Memory Card, Cylinder Holder

10061801

10061819

10061844

10078258

10082584

Network Kits (Includes Regulator, Wired Ethernet Access)

Wired Network System

10061803

10061820

10061845

10078259

10082578

Wired Network System + Charging, Cylinder Holder

10061804

10061821

10061847

--

10082593

Gas Miser® Demand Regulator:
The Intelligent Regulator The Gas Miser Regulator is the most advanced, yet simple-to-use calibration gas delivery system available. Made of nickel-plated brass and polished aluminum (especially important for reactive gases), the Gas Miser Regulator can supply gas flow from 0.1 Ipm to 3.0 Ipm. But that's only the beginning. Designed for use with any MSA Model RP Calibration Cylinder except chlorine and ammonia*, the Gas Miser Regulator features an automatic ON/OFF valve that releases gas only on demand. So only the amount of gas needed to calibrate your MSA instrument is delivered accurately. When the calibration is complete, the Gas Miser Regulator shuts off automatically. And, for user convenience, the regulator can stay connected to the cylinder where it remains in a ready state-making it ideal for such fixed installations as work benches and calibration stations.
The Gas Miser Regulator also eliminates the need to change regulators to accommodate different instruments orflow rates. It's not only intelligent, it's cost-efficient. Supplied with calibration tubing and special fitting.
* A Gas Miser Regulator for chlorine and ammonia is available for Model RP cylinders -PIN 10034391
Natural Gas Demand Regulator
This low-pressure Demand Regulator is designed to be used with MSA Instrument Calibration Systems to supply 100% natural gas. The Demand Regulator will automatically supply 100% natural gas to the calibrator as required. No adjustments are necessary or provided. Like the Gas Miser Regulator, the Natural Gas Regulator features an automatic ON/OFF valve that releases gas only on demand. Comes complete with (barb type) outlet fitting and easily connects to natural gas supply with W" NPT thread. Recommended for use with pressure of 0.3 to 5.0 psig.
Model RP Combination Regulators
Two regulators in one. Trigger activation allows a bump test or calibration check in the "SQUEEZE" mode or fixed-flow calibration in the up or "LOCKED" position. Designed for use with all Model RP and Econo-Cal calibration cylinders. Supplied with calibration tubing and special fitting.
Gas Miser® Manifold
The Gas Miser Manifold is not only a cylinder holder but it also incorporates a 4-station "bump test" or calibration manifold. It works with Model RP and Econo-Cal cylinders and Gas Miser regulator on any pumped or aspirated instrument. The manifold will supply the correct amount of gas required and will bump test or calibrate up to four instruments simultaneously. Gas Miser regulator sold separately.

Regulators .25/1.5 LPM Flow Control

Model RP Cylinder .25 lpm*

467895

Model RP Cylinder 1.5 lpm

467896

Gas Miser Demand Regulator:

Model RP

710288

Model RP, Chlorine and Ammonia

10034391

Model BD-20, with CGA 590 fitting

710289

Natural Gas Demand Regulator

Natural Gas Demand Regulator

710545

Model RP Combination Regulator

Model RP Combination Regulator, .25 lpm

711175

Model RP Combination Regulator, 1.5 lpm

711174

Gas Miser Manifold

4-station Manifold

710274

Model RP Calibration Check Kits

Check Kit, Model RP, with 1.5 lpm regulator-complete

477150

Check Kit, Model RP, with 0.25 lpm regulator-complete

477149

* Can be used with chlorine and ammonia; replaces PIN 809945.

Model RP Calibration Check Kits Model RP Check Kits consist of a regulating valve which includes a gauge to measure container pressure, an adapter hose, sensor adapter (where applicable), instructions, and a case fitted with room for two Model RP cylinders of calibration check gas.

Each MSA Calibration Gas Cylinder is shipped with an individual copy of a material safety data sheet (MSDS) and an individual copy of a certificate of analysis.MSA certifies that the gas mixture in calibration gas cylinders was prepared gravimetrically, using NIST traceable weights. The lot number and nominal value of the gas constituents in percent by volume, percent by mass, PPM, or volume are specified on the cylinder. The uncertainty statement of the specified nominal value is also listed.

Model RP Cylinder Contents:Pressure 1000 psig; approximately 100 liters at atmospheric pressure Size: 13-3/4" x 3" Weight: 2 lb 13 oz Material: Steel

Model RP and Model R Calibration Cylinders-Non-Reactive Gases, Steel Cylinder, 100 Liters

Gas Fill

Gas Mixture

Background

100LTRS
1000 PSI
Model RP

19LTRS
300 PSI
Model R

34LTRS
500 PSI
Econo-Cal

Air

air zero (THC < 1 ppm)

--

801050

--

--

Carbon
Monoxide

400 ppm carbon monoxide

air

806255

--

--

300 ppm carbon monoxide

air

473180

461769

--

200 ppm carbon monoxide

air

809243

--

--

100 ppm carbon monoxide

air

809242

--

--

50 ppm carbon monoxide

air

809241

--

--

100 ppm carbon monoxide

nitrogen

806734

--

--

Hydrogen

0.8% hydrogen

air

803102

--

--

Isobutylene

100 ppm isobutylene

air

494450

--

10048279

Methane

2.5% methane

air

491041

459942

--

6.6% methane

nitrogen

801049

--

--

Oxygen

20.8% oxygen

nitrogen

479857

468248

--

5.0% oxygen

nitrogen

493580

476302

--

Nitrogen

100% nitrogen

--

481317

--

--

Nitrous Oxide

nitrogen

806736

--

--

Pentane

0.75% pentane (50% LEU

air

804532

--

--

Propane

0.6% propane

air

493579

--

--

Combination
Gas
Cylinders

0.35% pentane, 19.0% oxygen, 100 ppm carbon monoxide

nitrogen

10007047

--

--

0.6% propane, 15% oxygen, 60 ppm carbon monoxide

nitrogen

801051

--

--

1.45% methane, 300 ppm carbon monoxide, 15% oxygen

nitrogen

10010162

--

--

2.5% methane, 60 ppm carbon monoxide, 15% oxygen

nitrogen

813718

--

--

2.5% methane, 300 ppm carbon monoxide, 15% oxygen

nitrogen

10040791

--

--

1.45% methane, 15% oxygen

nitrogen

478192

--

--

Model RP Cylinder Contents: Pressure 500 psig; approximately 58 liters at atmospheric pressure
Size: 13-3/4" x 3"
Weight: 1 lb 11 oz
Material: Aluminum
Eeono-Cal Cylinder Contents: Pressure 500 psig; approximately 34 liters at atmospheric pressure
Size: 13-3/4" x 3"
Weight: 1 lb 1 oz
Material: Aluminum

Model RP and Econo-Cal Calibration Cylinders-Reactive Gases, Aluminum Cylinders, 58 & 34 liters

Gas Fill

Gas Mixture

Background

58LTRS
500 PSI
Model RP

Econo-Cal

Ammonia

25 ppm ammonia

nitrogen

814866

711078

Chlorine

10 ppm chlorine

nitrogen

806740

711 066

Hydrogen Sulfide

40 ppm hydrogen sulfide

nitrogen

467897

711062

15 ppm hydrogen sulfide

nitrogen

806253

711064

10 ppm hydrogen sulfide

nitrogen

467898

711060

Nitric Oxide

50 ppm nitric oxide

air

812144

711074

Nitrogen Dioxide

10 ppm nitrogen dioxide

air

808977

711068

Phosphine

0.5 ppm phosphine

nitrogen

710533

711088

Hydrogen Chloride

40 ppm hydrogen chloride

nitrogen

710210

711080

Hydrogen Cyanide

10 ppm hydrogen cyanide

nitrogen

809351

711072

Sulfur Dioxide

10 ppm sulfur dioxide

air

808978

711070

Combination Gas
Cylinders

1.45% methane, 15% oxygen, 300 ppm carbon monoxide,
10 ppm hydrogen sulfide

nitrogen

804770

711058

1.45% methane, 15% oxygen, 20 ppm hydrogen sulfide

nitrogen

10048788

10048790

1.45% methane, 15% oxygen, 300 ppm carbon monoxide,
2.5% carbon dioxide

nitrogen

10058023

1.45% methane, 15% oxygen, 60 ppm carbon monoxide,
20 ppm hydrogen sulfide

nitrogen

10045035

10048280

1.45% methane, 15% oxygen, 10 ppm hydrogen sulfide

nitrogen

804769

711056

2.5% methane, 15% oxygen, 300 ppm carbon monoxide,
10 ppm hydrogen sulfide

nitrogen

813720

711076

2.5% methane, 15% oxygen, 60 ppm carbon monoxide,
20 ppm hydrogen sulfide

nitrogen

10048890

10048981

1.45% methane, 15% oxygen, 20 ppm hydrogen sulfide

nitrogen

10048889

10048888

1.45% methane, 15% oxygen, 10 ppm hydrogen sulfide,
300 ppm carbon monoxide, 2.5% carbon dioxide

nitrogen

10050744

10058022

0.35% pentane, 19% oxygen, 100 ppm carbon monoxide,
35 ppm hydrogen sulfide

nitrogen

10007049

1.45% methane, 15% oxygen, 300 ppm carbon monoxide,
2.5% carbon dioxide

nitrogen

10058021

Note: Reactive gases have an expiration date listed on each cylinder. This is to ensure the highest quality and accuracy for instrument calibration. Most cylinders have an expiration date of 12 months. Check with MSA Customer Service for the exact shelf life of a particular calibration cylinder.

Contents:

Pressure 1000 psig; approximately 58 liters of pure methane with odorant added to smell like natural gas in all commercial gas lines

Size: 8-1/2" x 3"

Weight: 1 lb 13 oz

Material: Steel

Gas Fill

Gas Mixture

Part No.

Methane

100% Methane

711014

Contents:

Pressure 2200 psig; approximately 552 liters (20 cu ftl of gas at atmospheric pressure

Size: 25" x 4-1/4"

Material: Steel

Gas Fill

Gas Mixture

Background

Part No.

Methane

2.5% Methane, 15% Oxygen, 60 ppm Carbon Monoxide,

Nitrogen

710566

1.45% Methane, 15% Oxygen, 60 ppm Carbon Monoxide

Nitrogen

710565

Air, zero

Air, zero, THC<l ppm

--

710776

Squirt Gas Bump Tester

Squirt Gas Bump Test Kit, less cylinder, but with required fittings and adapters, complete with instructions

813411

Cylinders for Squirt Gas

Instrument

Squirt Gas
Cylinder

Methane

Pentane
Simulant

Oxygen

Carbon
Monoxide

Hydrogen
Sulfide

Isobutylene

Explosimeter

815307

2.5%

See cylinder

--

--

--

--

Air

Gasport

814350

2.5%

--

15% 02

60 ppm CO

--

--

Nitrogen

Gasport

814349

2.5%

--

15% 02

300 ppm CO

--

Nitrogen

Passport, FiveStar

814497

1.3%

50% LEL

15% 02

60 ppm CO

--

--

Nitrogen

Passport, FiveStar

814559

1.3%

50% LEL

15% 02

300 ppm CO

--

Nitrogen

MiniCO** Responder

814978

--

--

--

60 ppm CO

--

--

Air

MiniH2S*Responder

814979

--

--

--

--

35 ppm H2S

--

Nitrogen

MicroGard**

815308

1.3%

52% LEL

15% 02

--

--

--

Nitrogen

Passport PID II

815704

--

--

--

--

--

100 ppm

Air

Single Portable Cylinder Holder
The Single Portable Cylinder Holder is designed for use with all MSA Model R and Model RP cylinders. It fits neatly on a workbench or shelf, and its unique design ensures that the calibration cylinder (with the regulator attached) always stays where you put it.
Double Cylinder Holder, Wall-Mounted
The Wall-Mounted Double Cylinder-Holder holds all MSA Model R and Model RP cylinders. A molded base and holding straps keep the cylinders securely in position, yet both cylinders and/or regulators can be easily changed. The holder is ideal for field station calibrations and can be easily mounted for workbench applications.

Single Cylinder Holder, 6" wide x 13" long x 4" high

710386

Double Cylinder Holder, 17" high, 10" wide, 3V" deep at base

710483

Calibration Cylinders Are Recyclable!
MSA has affiliated with the Association of Retarded Citizens, Butler County-a nonprofit organization that employs mentally retarded citizens-and established a Cylinder Recycling Center. The calibration cylinders are not refilled, but salvaged for scrap. All money generated from selling the scrap cylinders is placed in the ARC operating fund for salaries and operating costs.
Calibration cylinders are considered hazardous unless the cylinders are empty. MSA has developed special devalving tools that will ensure the cylinder is empty and render the cylinder non-fillable. For your convenience, MSA also offers a specially pre-addressed shipping box (also recyclable) which helps you pay the lowest shipping costs available.
The MSA Recycling Center limits the return of calibration cylinders to MSA-Iogoed cylinders only. Non-MSA cylinders will be rejected.

Devalving Tool, Model "RP" & Econo-Cal Cylinders

711228

Devalving Tool, Model "R" cylinders

711229

Shipping Box, Special, Pre-addressed

711227