EXTREME DURABILITY!
Nearly indestructible, the high impact-resistant nylon housing withstands the harsh rigors of the toughest applications. The lightest, most rugged line of composite retractables
are available in 16- (4.9 m), 20- (6 m), 30- (10 m), 50- (75 m) and 65-ft. (20 m) lengths.
FEATURES:

• Corrosion-resistant stainless steel and aluminum internal components extend service life and reduce replacement costs
• Lightest composite unit on the market - easy to handle and transport to/from job sites
• Unique side payout design reduces wear on the entry guide bushing and cable for smooth operation with less drag
• Smooth, quiet operation; engineered spring retraction tension designed not to pull or drag on a worker to improve productivity and reduce fatigue
• Built-in, ergonomically-designed molded handle on the 50- (75 m) and 65-ft. (20 m) cable units provide support and leverage when attaching to anchorage connector. Easier to install.
• Dual swivels (unittop and snap hook) included on all cable models to minimize lifeline from twisting during use
• New and improved load indicator identifies when the unit needs to be removed from service* *Cable models - on snap hook, Web models - flag on webbing
• No annual factory recertification required* -lowers cost of ownership and increases productivity *Except in Canada where the Canadian Standards Association requires annual factory recertification.
• Cable models rated to 400-lb. (781.4 kg) capacity when using a SofStop® shock absorber (928LS/18INBK)
• Web models rated for up to 400-lb. (781.4 kg) worker

SKU

Description

Weight

Dimensions (LxWxD)

FALCON WEB SELF-RETRACTING LIFELINES

ANSIZ359

MP16P-Z7/16FT

l6-ft. (4.9 m) web lifeline w/stainless steel swivel, carabiner & snap hook

3.3 lbs. (1.5 kg)

7.2-in. x 5.7-in. x 2.7-in. (183 mm x 745 mm x 69 mm)

MP20P-Z7/20FT

20-ft. (6 m) web lifeline w/stainless steel swivel, carabiner & snap hook

3.4 lbs. (1.5 kg)

7.2-in. x 5.7-in. x 2.7-in. (183 mm x 745 mm x 69 mm)

FALCON GALVANIZED WIRE ROPE SELF-RETRACTING LIFELINES

ANSIZ359

MP20G-Z7/20FT

20-ft. (6 m) galvanized wire rope (3/16-in. [5 mm]) w/tagline & carabiner

8.9 lbs. (4.0 kg)

la-in. x 8.4-in. x 4-in. (254 mm x 273 mm x 702 mm)

MP30G-Z7/30FT

30-ft. (9 m) galvanized wire rope (3/l6-in. [5 mm]) w/tagline & carabiner

10.7 lbs. (4.9 kg)

la-in. x 8.4-in. x 4-in. (254 mm x 273 mm x 702 mm)

MP50G-Z7150FT

50-ft. (15 m) galvanized wire rope (3/l6-in. [5 mm]) w/tagline & carabiner

l4.8 lbs. (6.7 kg)

l3.5-in. x 9.7-in. x 4-in. (343 mm x 246 mm x 702 mm)

MP65G-Z7/65FT

65-ft. (20 m) galvanized wire rope (3/16-in. [5 mm]) w/tagline & carabiner

17.l lbs. (7.8 kg)

l3.5-in. x 9.7-in. x 4-in. (343 mm x 246 mm x 702 mm)

Stainless steel wire rope models available. Note: Locking Snap Hook - 3/4in. (19 mm) gate opening.

FEATURES:

• Durable and dependable, corrosion-resistant stainless steel and aluminum housing
• No annual factory recertification required* -lowers cost of ownership and increases productivity *Except in Canada where the Canadian Standards Association requires annual factory recertification.
• Ideal for hard-to-mount locations
• Corrosion-resistant stainless steel and aluminum components extend service life
• Rated to 400 lbs. (781.4 kg) capacity when using a SofStop® shock absorber (928LS/18INBK)

SKU

Description

Weight

Dimensions (LxWxD)

MIGHTY LITE SELF-RETRACTING LIFELINES

ANSIZ359

RL100G-Z7/100FT

100-ft. (30 m) galvanized wire rope (3/l6-in. [5 mm]) w/tagline & carabiner

45 lbs. (20.4 kg)

l5.75-in. x 11.75-in. x 5-in. (400 mm x 298 mm x 727 mm)

RL130G-Z7/130FT

130-ft. (40 m) galvanized wire rope (3/16-in. [5 mm]) w/tagline & carabiner

50 lbs. (22.7 kg)

l5.75-in. x 11.75-in. x 5-in. (400 mm x 298 mm x 727 mm)

RL175G-Z7/175FT

175-ft. (53 m) galvanized wire rope (3/l6-in. [5 mm]) w/tagline & carabiner

70 lbs. (37.8 kg)

l5.75-in. x 11.75-in. x 7.l8-in. (400mmx298mmx 782mm)

Stainless steel wire rope models available. Note: Locking Snap Hook - 3/4in. (19 mm) gate opening.

COMPACT AND LIGHTWEIGHT - ONLY 1.9 LBS.
The cost-effective and competitive pricing of the new TurboLite Personal Fall Limiters will make shock-absorbing lanyards obsolete on the job site. Workers will no longer need to "switch-out" equipment to maintain a safe fall distance.
FEATURES:

• First affordable alternative to shock-absorbing lanyards
• Extremely compact and lightweight (1.9 lbs. [.86 kg]) provides 6-ft. (1.8 m) working capacity lifeline; unit attaches directly to the harness back D-ring for greater mobility and versatility
• Engineered webbing for greater abrasion resistance and long service life
• Built-in swivel prevents lifeline from twisting
• High-strength, impact-resistant nylon housing for maximum durability
• Rated for up to a 400-lb. (181.4 kg) user
• Meets global standards for international companies; meets all applicable OSHA, ANSI A10.32 and ANSI Z359, and CSA Standards.

SKU

Description and Unit Connector

Lanyard End Connector

TURBOLITE PERSONAL FALL LIMITERS

ANSIZ359

MFL-l-Z7/6FT

TurboLite w/steel twist-lock carabiner

Locking snap hook

MFL-2-Z7/6FT

TurboLite w/steel twist-lock carabiner

Locking rebar hook

ANSI A10.32

MFL-11/6FT

TurboLite w/aluminum twist-lock carabiner

Aluminum locking snap hook

MFL-12/6FT

TurboLite w/aluminum twist-lock carabiner

Aluminum locking rebar hook

Additional models available.

AN EFFECTIVE SOLUTION WHEN WORKING WITH LOW FALL CLEARANCE New patent-pending Twin Turbo D-Ring Connector easily adapts two (2) lightweight TurboLite Personal Fall Limiters (PFLs) for continuous 100% tie-off fall protection.
FEATURES:

• Replacement for double-legged shock-absorbing lanyards
• Innovative design that easily connects to the back D-ring of any fall protection harness
• Increases worker productivity and versatility with freedom of movement -less restrictive than other units on the market
• Permits TurboLite PFLs to swivel in multiple directions for greater mobility; the swivel action prevents webbing from twisting and binding inside of the unit
• Easy-to-use and assemble/disassemble
• Adapts to most TurboLite PFL models
• Meets all applicable OSHA 1926.502, 1910.66; ANSI Z359 and A10.32; and CSA Z259.12-01 requirements

SKU

Description

Lanyard End Connector

Weight

TWIN TURBO SYSTEM KITS (All kits shipped completely assembled)

ANSIZ359

MFLB-3-Z7/6FT

Twin Turbo D-ring Connector & two (2) MFL-3-Z7/6FT TurboLite PFLs

Locking snap hooks

4.9 lbs. (2.2 kg)

MFLB-4-Z7/6FT

Twin Turbo D-ring Connector & two (2) MFL-4-Z7/6FT TurboLite PFLs

Locking rebar hooks

6.7 lbs. (3.0 kg)

ANSI A10.32

MFLB-11/6FT

Twin Turbo D-ring Connector & two (2) MFL-11/6FT TurboLite PFLs

Aluminum locking snap hooks

4.2 lbs. (1.9 kg)

MFLB-12/6FT

Twin Turbo D-ring Connector & two (2) MFL-12/6FT TurboLite PFLs

Aluminum locking rebar hooks

5.6 lbs. (2.5 kg)

GREATER VERSATILITY THROUGH DUAL OPERATION
FEATURES:

• Greater versatility through dual operation:
  - attach directly to the harness D-ring for use as a personal fall limiter
  - or, use as a traditional retractable lifeline
• 9 ft. (2.7 m) of working capacity
• Small, lightweight design 2.9 lbs. (1.3 kg)
• Quick-activating, high-strength stainless steel braking system
• Variety of integral anchorage connectors available
• No annual factory recertification required
• Meets all applicable OSHA, ANSI and CSA Standards

SKU

Unit Connector

Lanyard End Connector

MILLER SCORPION PERSONAL FALL LIMITERS

ANSIZ359

PFL-4-Z7/9FT

Carabiner & swivel shackle

Locking snap hook

PFL-9-Z7/9FT

Carabiner & swivel shackle

Locking rebar hook

Additional models available. Note: Locking Snap Hook - 3/4·in. (19 mm) gate opening.

SMALLEST AND LIGHTEST 9-FT. CABLE LIFELINE ON THE MARKET The Black Rhino SRL is designed with stainless steel wire rope to endure the daily rigors
of harsh environments.
FEATURES:

• No annual factory recertification required
• Quick-activating, high-strength stainless steel braking system - arrests free falls, providing a quick, safe rescue
• Variety of integral anchorage connectors available
• Integral load indicator - indicates when the unit must be removed from service and returned for repair
• Extended service life - corrosion-resistant stainless steel and aluminum components
• Integral internal shock absorber - consistently reduces fall forces to 900 lbs./f (4 kN) or less for greater safety

SKU

Unit Connector

Lanyard End Connector

Length

BLACK RHINO SELF-RETRACTING LIFELINE

ANSIZ359

CFL-4-Z7/9FT

Stainless steel swivel & steel twist-lock carabiner

Locking, swivel snap hook with load indicator

9-ft. (2.7 m)

Additional models available. Note: Locking Snap Hook - 3/4-in. (19 mm) gate opening.

Anchorage Connectors are designed as the intermediary for securing a connecting device to an anchorage.
Careful consideration should be given to selecting a proper anchorage for ultimate safety. The anchorage should be easily accessible, located a safe distance above any lower obstacles and support 5,000 lbs. (22 kN) per worker.

Push-Thru Eye Bolt - Model 420
Spring-action anchorage connector offers simple one-hand installation and can be used for a wide range of applications. Fits 3/4-in. (19 mm) dia. holes and includes the integral SofStop® Shock Absorber.
400 lbs. (181.4 kg) max. capacity.

Rebar Hook Anchor - Model 485/221NYL Designed to facilitate anchoring to scaffolding, pipe or angle iron, and features a locking rebar hook with SofStop® Shock Absorber and a D-ring on the other end to accommodate the connecting device. Locking rebar hook with 2-1/2 in. (64 mm) gate opening. 400 lbs. (181.4 kg) max. capacity.

Wire Hook - Model 470
Stainless steel Wire Hook connects to various approved anchorages including railings, small I-beams, angle iron and scaffolding. Simply squeeze the spring-loaded hook and slip the large opening over the approved structure. 400 lbs. (181.4 kg) max. capacity.

Cross-Arm Strap - Model 8183/6FTGN
6-ft. (1.8 m)web Cross-Arm Strap wraps around I-beams and other structures and attaches with a 2-in. (51 mm) D-ring that slips through a 3-in. (76 mm) D-ring to form a secure attachment point for lanyards and other connecting devices. 400 lbs. (181.4 kg) max. capacity.

Rebar Hook Anchor
Model 480-Z7/19INGN - Designed to facilitate anchoring to scaffolding, pipe or angle iron, and features a locking rebar hook for easy, one-hand installation and a D-ring on the other end to accommodate the connecting device. 400 lbs. (181.4 kg) maximum capacity. Locking rebar hook with 2-1/2 in. (64 mm) gate opening.
Meets ANSI Z359.

Cable Anchor - Cable Anchorage Connectors create quick, easy and secure points of attachment. Constructed of 1/4-in. (6 mm) vinyl-coated, galvanized wire rope and a steeI3-in. (76 mm) D-ring. Standard length is 6 ft. (1.8 m); additional lengths available.
Model 8187V features a forged steel, auto-lock, captive eye carabiner with 1-in. (25 mm) gate opening. Model 8186V features a locking snap hook with 3/4-in. (19 mm) gate opening.
400 lbs. (181.4 kg) maximum capacity.

Model 416
D-Bolt Anchor for up to 4-in. (102 mm) working thickness includes a 5/8-in. (16 mm) diameter bolt with lock washer and nut. Stainless steel D-Bolt Anchor available (Model 416SS).

Model 417
D-Bolt Anchor without hardware. Stainless steel D-Bolt Anchor available (Shown Above: Model 417SS D-Bolt).

Model 410
Steel D-ring with plate, complete with
4-3/8 in. (111 mm) diameter bolts, lock washers, nuts and drilling template.

Model 17D-1
Steel twist-lock carabiner; 1-in. (25 mm) gate opening. 400 lbs. (181.4 kg) max. capacity. Meets ANSI Z359.

Model 18D-1
Large, steel twist-lock carabiner; 2-in. (51 mm) gate opening. 400 lbs. (181.4 kg) max. capacity. Meets ANSI Z359.

Model 17D-2
Lightweight, aluminum twist-lock carabiner; 1-in. (25 mm) gate opening. 400 lbs. (181.4 kg) max. capacity. Meets ANSI A10.32.
Model 17D-3 - Same as 170-2 with triple-action feature.

Model 18D-2
Large, aluminum twist-lock carabiner; 2-1/4 in. (57 mm) gate opening. 400 lbs. (181.4 kg) max. capacity. Meets ANSI A10.32.

SKU

Description

ROPE GRABS

ANSI Z359

8175-Z7

Stainless steel trailing rope grab with anti-panic feature for use with 5/8-in. (16 mm) rope

8175SLS-Z7/3FTYL

8175-Z7 with attached 3-ft. (1 m)web lanyard with locking snap hook and SofStop shock absorber

ANSI A10.32

8172

MicroLoc stainless steel, compact, trailing wire rope grab for use with 5/16-in. (8mm) wire rope

8173*

MicroLoc stainless steel, compact, trailing rope grab for use with 5/8-in. (16 mm) rope

8174*

Stainless steel. manual rope grab for use with 5/8-in. (16 mm) or 3/4-in. (19 mm) synthetic rope

8175*

Stainless steel trailing rope grab for use with 5/8-in. (16 mm) rope

8175SLS**

8175 with attached 3-ft. (1 m)web lanyard with locking snap hook and SofStop shock absorber

Note: Locking Snap Hook - 3/4 in. (19 mm) gate opening. *Does not meet CSA requirements. ** CSA model available.

Miller Vertical lifelines are designed for use with 5/8-in. (16 mm) synthetic rope lifeline with a minimum tensile strength of 5,000 lbs. (22 kN), secured to an anchorage independent of the worker's platform. Meets all applicable OSHA, ANSI and CSA requirements.

SKU

Description

VERTICAL LIFELINES

194R-2/200FTWH

200-ft. (67.0 m) Nylon rope lifeline w/carabiner & thimble; 5/8-in. (16 mm) diameter

194R-2/250FTWH

250-ft. (76.2 m) Nylon rope lifeline w/carabiner & thimble; 5/8-in. (16 mm) diameter

194R-2/300FTWH

300-ft. (97.4 m) Nylon rope lifeline w/carabiner & thimble; 5/8-in. (16 mm) diameter

Additional lengths available. Note: Must specify length when ordering.

• OSHA states that potentially fatal suspension trauma can occur within minutes while waiting for rescue after a fall
• Average fall rescue time is 15 minutes
• When used, the Relief Step Safety Device provides support and enhances blood circulation until rescue - permitting the ability to move and flex leg muscles
• Small and lightweight; the Relief Step Safety Device attaches to any brand full-body harness
• Utilizing two (2) Relief Steps (one for each leg/foot) assures greater comfort until rescue is completed

SKU

Description

MILLER RELIEF STEP SAFETY DEVICE

9099/36BULK

36 Relief Step Safety Devices in bulk quantity

Prevent tools from dropping that can cause serious injuries on the job site. Lanyard conveniently attaches to the user's belt. Tools are attached with the carabiner or by cinching the cord around tool.  

SKU

Description

BANDIT TOOL LANYARD

9077/1

Bandit Tool Lanyard attaches to the user's belt