Miller Fall Protection Page 2

Miller Fall Protection Page 2

For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.

Credit Card Images

**Miller Body Belts**

As of January 1, 1998, OSHA requires full-body harnesses for fall protection in the constrution industry. Body belts should be used for work positioning only or be used in conjunction with a full-body harness to provide fall protection.
Model	Description
2NA	Body belt with tongue buckle, includes side D-rings and 3" back pad
3NA	Body belt with tongue buckle, includes single D-ring and 3" back pad
123N	Lined body belt with tongue buckle, includes single D-ring
124N	Lined body belt with tongue buckle, includes side D-rings
Body Belt Sizing: When ordering, indicate size by using the following suffixes: Small: 32" - 40" add /SBK (Ex: 2NA/SBK) Medium: 36" - 44" add /MBK Large: 42" - 48" add /LBK X-Large: 44" - 52" add /XLBK XX-Large: add /XXLBK XX-Small and X-Small available upon request

**Relief Step Safety Device**

The Miller Relief Step Safety Device alleviates the effects of orthostatic intolerance, also known as suspension trauma. If a fall occurs, a person becomes suspended in a harness and remains both vertical and sedentary for a period of time, causing blood to "pool" in the veins of the legs. Subsequently, blood is restricted to the brain and other major organs that may initially result in unconsciousness. If not rescued promptly, serious injury or death may occur. The Miller Relief Step is designed to provide a short term solution for alleviating suspension trauma. OSHA states that potentially fatal suspension trauma can occur within minutes while waiting for rescue after a fall Average fall rescue time is 15 minutes When used, the Relief Step provides support and enhances blood circulation until rescue - permitting the ability to move and flex leg muscles Small and lightweight, the Relief Step attaches to any brand full-body harness Utilizing two (2) Relief Steps (one for each leg/foot) assures greater comfort until rescue is completed
Model	Description
9099X/12	Consists of a box of 12 Relief Step Safety Devices
9099/36BULK	36 Relief Step Safety Devices in bulk quantity

**Miller Rescue Ladder**

The Miller Aerial Lift Rescue Ladder is a portable 15 foot nylon web ladder designed and intended to assist with self rescue for applications such as aerial lifts, bucket trucks and elevated work surfaces. In the event of a fall, the user releases the ladder by pulling on the drawstring and then climbs back to the work surface.

**Miller StopFall System**

The Miller StopFall System provides a user-friendly and reliable work positioning and fall arrest system for climbing wooden poles. The StopFall system is specifically designed with a 75 inch pole strap (minimum length) and features a 21 inch security strap with unique gaffs that "bite" into wooden poles. Meets CSA Standard Z259.14-99 for Type A and Type AB. Model 7600A StopFall System fits wood pole size 25" - 50" circumference with friction buckle adjustment Model 7600B StopFall System fits wood pole size 25" - 50" circumference with tongue buckle adjustment The polyester pole strap comprises: An integral steel reinforcement band which prevents "hour glassing" and maintains shape A rugged neoprene wear pad for increased service life Double locking snap hooks and length adjuster assembly Two-piece spring assembly to prevent a continual electric path Stainless steel dome stops to prevent the security strap from inadvertently sliding off the end of the wear pad Specially designed security strap: Corrosion resistant, stainless steel hardware Spring loaded gaffs that provide instant grip on wooden poles Nylon rollers permit free movement of the gaffs and minimize abrasion on the strap A disconnect and length adjuster with a "parking" feature for when the security strap is not in use

**Miller Safety Straps**

Miller brand safety straps are equipped with locking snap hooks and are constructed with a red inner core/wear indicator. Should the red core become exposed, the strap must be removed from service.
NF Series Safety Strap A 1-3/4" wide, 100% nylon safety strap offers a friction buckle to adjust the length of the strap quickly and easily. Model 6NFLS/6FTYL - 6 ft. length Model 7NFLS/7FTYL - 7 ft. length
YR Series Safety Strap Strong safety strap, made of a 6 ply nylon, remains flexible in all types of weather conditions. Tongue buckle adjuster included for quick, safe adjustment Model 6YRLS/6FTBR - 6 ft. length Model 7YRLS/7FTBR - 7 ft. length

**Miller Linemen's Belts**

Miller Linemen's Belts combine superior design characteristics and handmade craftsmanship to create products of the highest quality everytime. All Miller linemen's belts feature: Side positioning D-rings Leather tool loops Accesssory snap Support belt rings Tape thong Accessory ring Fixed Belts Fixed belts do not allow for lateral movement of the D-rings or waist strap with tool loops Semi-Floating Belts On semi-floating belts, the waist strap with tool loops is completely separate from the D-saddle, allowing for lateral movement of the waist strap prior to any use. Any load or pull does not bind tools to tool loops Full-Floating Belts Full-floating belts allow for lateral movement of the D-saddle with D-rings during use. As a lineman changes position on a pole, the D-rings easily adjust to the movement. As a result, the pole strap rubs against the pole less frequently and receives less wear. Any load or pull does not bind tools to the tool loops
Model	Style	Width	Construction	Weight
60NL	Fixed	4"	Body pad with soft dielectric lining and 1-3/4" waist strap	3.9 lbs.
93N	Fixed	5"	Body pad with soft dielectric leather lined 1-3/4" waist strap	3.8 lbs.
94N	Semi-floating	4"	Leather body pad with 1-3/4" waist strap	4.0 lbs.
95N	Full-floating	5"	Leather body pad with 1-3/4" waist strap	4.6 lbs.
99N	Fixed	9"	Leather back saver body pad with 1-3/4" waist strap	3.9 lbs.
93YR	Semi-floating	5"	MillerHyde II synthetic leather body pad with 1-3/4" waist strap	3.9 lbs.
75N	Full-floating	5"	MillerHyde II synthetic leather body pad with a D-saddle and 1-3/4" waist strap	4.9 lbs.
88N	Full-floating	9"	Leather back-saver body pad with a D-saddle and 1-3/4" waist strap	5.6 lbs.
8449	Full-floating	5"	Leather, cushioned body pad with 1-3/4" leather D-saddle and waist strap	4.5 lbs.

**Linemen's Belt Sizing**

The degree of comfort a lineman receives from a belt depends on the construction of the belt and the location of the D-rings. For best fit, order by D-size. The D-size is the distance between the heels of the D-rings. When wearing a belt, the D-rings should be located 1 inch in front of the hip bones. To determine proper D-size, measure across the back from hip bone to hip bone and add 2 inches. This measurement is the D-size.
D-size	D18	D19	D20	D21	D22	D23	D24	D25	D26	D27	D28	D29	D30
Min	32"	33"	34"	35"	36"	38"	40"	42"	44"	46"	47"	48"	49"
Max	42"	43"	44"	45"	46"	48"	50"	52"	54"	56"	57"	58"	59"

**Miller SideWinder**

Retractable Web Lanyard Provides protection where a pole strap cannot...while climbing past pole obstructions. Simply pull out the webbing and wrap around the pole. Then proceed to unhook and re-hook the pole strap. Easily attaches to any standard linemen's belt. Weighs only 3.7 lbs.
Model # 8327SW/8FTYL

**Miller Shock Absorbing Lanyards**

Manyard II Stretchable Shock Absorbing Lanyards Contracts 6 ft to 4 ft. Manyard II lanyards greatly reduce the chances of tripping, snagging or dragging. Specially woven shock absorbing inner core smoothly expands up to 42 inches to reduce fall arrest forces Heavy duty tubular outer jacket serves as a back up lanyard Unique warning flag provides visual proof that a lanyard has been involved in a fall and must be removed from service Webbing protected with Teflon HT for an invisible finish that provides superior water/oil repellency and protection against grease, dirt and grime Integral bright red core makes visual inspection easier and more reliable Available in green or blue webbing for greater chemical resistance
Model	Material	Number of Legs	Harness Connection	Anchorage Connection	Special Features	Standard Length*
216M/6FTGN	Webbing	One	Locking snap hook	Locking snap hook	Warning flag / Red core wear indicator	6 ft.
219M/6FTGN	Webbing	One	Locking snap hook	Locking rebar hook	Warning flag / Red core wear indicator	6 ft.
231M/6FTGN	Webbing	Two	Locking snap hook	Locking rebar hooks	Warning flag / Red core wear indicator	6 ft.
232M/6FTGN	Webbing	Two	Locking snap hook	Locking snap hooks	Warning flag / Red core wear indicator	6 ft.
233M/6FTGN	Webbing	One	Choke-off loop	Locking snap hook	Warning flag / Red core wear indicator	6 ft.
* Available in lengths from 4 ft. to 10 ft. For greater chemical resistant blue webbing, substitute "BL" for "GN" in the suffix of the corresponding lanyard model number (Ex: 216M/6FTBL) Note: Locking Snap Hook - 3/4" gate opening; Locking Rebar Hook - 2-1/2" gate opening

**Miller Manyard HP Shock-Absorbing Lanyards**

Specially woven shock absorbing inner core smoothly expands up to 42 inches to reduce fall arrest forces Heavy duty tubular outer jacket serves as a back up lanyard Unique warning flag provides visual proof that a lanyard has been involved in a fall and must be removed from service Webbing protected with Teflon HT for an invisible finish that provides superior water/oil repellency and protection against grease, dirt and grime Available in green or blue webbing for greater chemical resistance
Model	Material	Number of Legs	Harness Connection	Anchorage Connection	Special Features	Standard Lanyard Length*
216TWLS/6FTGN	Webbing	One	Locking snap hook	Locking snap hook	Warning flag	6 ft.
219TWRS/6FTGN	Webbing	One	Locking snap hook	Locking rebar hook	Warning flag	6 ft.
231TWRS/6FTGN	Webbing	Two	Locking snap hook	Two locking rebar hooks	Warning flag	6 ft.
232TWLS/6FTGN	Webbing	Two	Locking snap hook	Two locking snap hooks	Warning flag	6 ft.
233TWLS/6FTGN	Webbing	One	Web choke-off loop	Locking snap hook	Warning flag	6 ft.
233TWRS/6FTGN	Webbing	One	Web choke-off loop	Locking rebar hook	Warning flag	6 ft.
266TWLS/6FTGN	Webbing	Two	Web choke-off loop	Two locking snap hooks	Warning flag	6 ft.
266TWRS/6FTGN	Webbing	Two	Web choke-off loop	Two locking rebar hooks	Warning flag	6 ft.
* Available in lengths from 4 ft. to 10 ft. For greater chemical resistant blue webbing, substitute "BL" for "GN" in the suffix of the corresponding lanyard model number (Ex: 216TWLS/6FTBL) Note: Locking Snap Hook - 3/4" gate opening; Locking Rebar Hook - 2-1/2" gate opening

**Manyard Shock Absorbing Lanyards**

With 20 years of design refinement, the "original" Manyard Shock Absorbing Lanyards are unsurpassed in the market for safety, comfort and mobility. Specially woven, shock absorbing inner core smoothly expands up to 42 inches to reduce fall arrest forces Heavy duty tubular outer jacket serves as a back up lanyard Unique warning flag provides visual proof that a lanyard has been involved in a fall and must be removed from service
Model	Material	No. of Legs	Harness Connection	Anchorage Connection	Special Features	Standard Length*
216WLS/6FTYL	Webbing	One	Locking snap hook	Locking snap hook	Warning flag	6 ft.
219WRS/6FTYL	Webbing	One	Locking snap hook	Locking rebar hook	Warning flag	6 ft.
231WRS/6FTYL	Webbing	Two	Locking snap hook	Locking rebar hooks	Warning flag	6 ft.
232WLS/6FTYL	Webbing	Two	Locking snap hook	Locking snap hooks	Warning flag	6 ft.
233WLS/6FTYL	Webbing	One	Choke-off loop	Locking snap hook	Warning flag	6 ft.
* Available in lengths from 4 ft. tto 10 ft. Note: Locking Snap Hook - 3/4" gate opening; Locking Rebar Hook - 2-1/2" gate opening

**Miller StretchStop Lanyards with SofStop Shock Absorber**

Miller StretchStop Lanyards combine the integral SofStop Shock Absorber with a unique stretchable lanyard design. Unique stretchable design (4 ft. to 6 ft.) minimizes tripping, snagging and dragging SofStop Shock Absorber pack is designed with a specially woven inner core that smoothly expands up to 42 inches to reduce fall arrest forces Includes a heavy duty back-up safety strap Webbing protected with Teflon HT for an invisible finish that provides superior water/oil repellency and protection against grease, dirt and grime Available in green or blue webbing for greater chemical resistance
Model	Material	No. of Legs	Harness Connection	Anchorage Connection	Standard Length*
913SS/6FTGN	Webbing	One	Locking snap hook	Locking snap hook	6 ft.
913RSS/6FTGN	Webbing	One	Locking snap hook	Locking rebar hook	6 ft.
8798SS/6FTGN	Webbing	Two	Locking snap hook	Locking snap hooks	6 ft.
8798RSS/6FTGN	Webbing	Two	Locking snap hook	Locking rebar hooks	6 ft.
* Available in lengths from 4 ft. to 10 ft. For greater chemical resistant blue webbing, substitute "BL" for "GN" in the suffix of the corresponding lanyard model number (Ex: 913SS/FTBL) Note: Locking Snap Hook - 3/4" gate opening; Locking Rebar Hook - 2-1/2" gate opening

**Miller HP Lanyards with SofStop Shock Absorbers**

Miller HP Lanyards with SofStop Shock Absorbers The versatile Miller HP web lanyard with a SofStop shock absorber pack is designed with a specially woven inner core that smoothly expands up to 42 inches to reduce fall arrest forces Includes heavy duty back up safety strap Webbing protected with Teflon HT for an invisible finish that provides superior water/oil repellency and protection against grease, dirt and grime Available in green webbing or blue webbing for greater chemical resistance
Model	Material	No. of Legs	Harness Connection	Anchorage Connection	Special Features	Standard Length
910TWLS/6FTGN	Webbing	One	Locking snap hook	Locking snap hook	Adjustable	4' to 6'
913TWLS/6FTGN	Webbing	One	Locking snap hook	Locking snap hook	-	6'
8798T/6FTGN	Webbing	Two	Locking snap hook	Two locking snap hooks	-	6'
8798TR/6FTGN	Webbing	Two	Locking snap hook	Two locking rebar hooks	-	6'
8878T/6FTGN	Webbing	Two	Locking snap hook	Two locking snap hooks	Adjustable	4' to 6'
8878TR/6FTGN	Webbing	Two	Locking snap hook	Two locking rebar hooks	Adjustable	4' to 6'
For greater chemical resistant blue webbing, substitute "BL" for "GN" in the suffix of the corresponding lanyard model number (Ex: 910TWLS/6FTBL) Note: Locking Snap Hook - 3/4" gate opening; Locking Rebar Hook - 2-1/2" gate opening

**Miller Lanyards with SofStop Shock Absorbers**

The versatile Miller SofStop shock absorber pack is an integral component of various Miller brand rope, wire rope and web shock-absorbing lanyards The versatile Miller HP web lanyard with a SofStop shock absorber pack is designed with a specially woven inner core that smoothly expands up to 42 inches to reduce fall arrest forces
Model	Material	No. of Legs	Harness Connector	Anchorage Connector	Special Features	Lanyard Length
928LS/18INYL	-	N/A	Locking snap hook	D-ring	-	18 in.
901RLS-2/6FTWH*	5/8" rope	One	Locking snap hook	Locking snap hook	-	6 ft.
903RLS-2/6FTWH*	Rope	One	Locking snap hook	Locking snap hook	Adjustable	6 ft.
907LS/6FTYL	Wire rope	One	Locking snap hook	Locking snap hook	-	6 ft.
907NLS/6FTYL	Vinyl coated wire rope	One	Locking snap hook	Locking snap hook	-	6 ft.
910WLS/6FTYL*	Webbing	One	Locking snap hook	Locking snap hook	Adjustable	4' to 6'
913WLS/6FTYL*	Webbing	One	Locking snap hook	Locking snap hook	-	6 ft.
940WLS/6FTYL*	Webbing	One	Locking snap hook	Locking snap hook	Double SofStop pack for 12 ft free fall / Duty rated 400 lbs. capacity	6 ft.
8798-6/6FTYL*	Webbing	Two	Locking snap hook	Locking snap hooks	-	6 ft.
8798-6R/6FTYL*	Webbing	Two	Locking snap hook	Locking rebar hooks	-	6 ft.
* to order polyester, add "-5" to the corresponding model number (Ex: 903RLS-5/6FTWH) Note: Locking Snap Hook - 3/4" gate opening; Locking Rebar Hook - 2-1/2" gate opening

**Miller BackBiter Tie Back Lanyard**

Miller BackBiter offers the ultimate in tie-back safety. The webbing and snap hooks of regular lanyards are not designed to withstand the rigors of tying back. The innovative Miller BackBiter Tie-Back Lanyard with a 5K snap hook was designed from top to bottom for tie-back use. All-in-one lanyard with SofStop shock absorber and cross arm anchorage connector First snap hook with a 5,000 lb. gate load capacity from any angle Heavy duty polyester webbing and Cordura nylon webbing with five time more abrasion resistance Webbing protected with Teflon HT for an invisible finish that provides superior water/oil repellency and protection against grease, dirt and grime Available in green webbing or blue webbing for greater chemical resistance
Model	Material	No. of Legs	Harness Connection	Anchorage Connection	Lanyard Length
913B/6FTGN	Webbing	One	Locking snap hook	Locking 5K snap hook	6 ft.
8798B/6FTGN	Webbing	Two	Locking snap hook	Locking 5K snap hooks	6 ft.
For greater chemical resistance, substitute "BL" for "GN" in the suffix of the corresponding lanyard model number (Ex: 913B/6FTBL) Note: Locking Snap Hook - 3/4" gate opening; Locking Rebar Hook - 2-1/2" gate opening Cordura is a registered trademark of E.I. DuPont

**"O-Ring" Extension Option**

OSHA regulation 1926.502, Section (d) personal fall arrest systems, paragraph (6) states that "snap hooks shall not be engaged to a D-ring to which another snap hook or other connector is attached". This means a retractable unit and a lanyard cannot be simultaneously attached to the same harness back D-ring. Since it is potentially dangerous, difficult and time consuming to switch back and forth from a lanyard to a retractable, the new Miller Lanyard "O-Ring" option solves this concern by allowing the retractable to be attached to the lanyard "O-Ring", while the lanyard remains connected to the back D-ring of the harness. This eliminates the need to continually change attachment points from a lanyard to a retractable. The placement of the O-ring is designed so that if a fall occurs, the lanyard shock absorber will not engage and the retractable unit will arrest the fall. The Lanyard O-Ring Extension Option is available on any Miller shock absorbing lanyard, single or double legged lanyards. To order, add an "O" as a suffix to the model number (Ex: 913BO, 913SSO).

WSP home page	Products page	Suppliers page
Fall Protection	Miller Index	Previous Miller Page	Next Miller Page