Miller Fall Protection Page 3

Miller Fall Protection Page 3

For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.

**Miller "O" Ring Option**

Since it is potentially dangerous, difficult and time-consuming to switch back and forth from a lanyard to a retractable, the Miller Lanyard "O-ring" option solves this concern by allowing the retractable to be attached to the lanyard O-ring, while the lanyard remains connected to the back D-ring of the harness. This eliminates the need to continually change attachment points from a lanyard to a retractable. The placement of the O-ring is designed so that if a fall occurs, the lanyard shock absorber will not engage and the retractable unit will arrest the fall. Note: The lanyard O-Ring Option is available on any Miller shock-absorbing lanyard, single- or double-legged lanyards. To order, add an "O" as a suffix to the model number (Ex: 913BO; 913SSO).
OSHA regulation 1926.502, Section (d) personal fall arrest systems, paragraph (6) states that ... "snap hooks shall not be engaged to a D-ring to which another snap hook or other connector is attached." This means a retractable unit and a lanyard cannot simultaneously be attached to the same harness back D-ring.

**Miller BackBiter Tie-Back Lanyards**

The innovative Miller BackBiter Tie-Back lanyard with the Miller 5K® Snap Hook was designed from top to bottom for tie-back use. FEATURES First snap hook with a 5,000-lb. (22 kN) gate load capacity from any angle AII-in-one lanyard with SofStop® Shock Absorber and cross-arm anchorage connector SofStop Shock Absorber pack is designed with a specially-woven inner core that smoothly expands to reduce fall arrest forces Heavy-duty polyester webbing and Cordura® nylon webbing with five times more abrasion resistance
SKU	Material	Number of Legs	Harness Connection	Anchorage Connection	Standard Length
913B/6FTGN*	Webbing	One	Locking snap hook	Locking 5K snap hook	6-ft.(1.8m)
8798B/6FTGN*	Webbing	Two	Locking snap hook	Locking 5K snap hooks	6-ft.(1.8m)
'In Canada. add a "c" to the SKU (ie. 9138/6FTGNC). Locking Snap Hook - 3/4-in. 119mm) gate opening. Cordura is a registered trademark of E. I. DuPont.

**Miller Manyard & Manyard HP Shock Absorbing Lanyards**

With 20 years of design refinement, the "Original" Miller Manyard and Miller Manyard HP Shock-Absorbing Lanyards are unsurpassed in safety on the job site. FEATURES Specially-woven shock-absorbing inner core smoothly expands to reduce fall arrest forces Heavy-duty tubular outer jacket serves as a back-up lanyard Unique warning flag provides visual proof that a lanyard has been involved in a fall and must be removed from service
SKU	Material	Number of legs	Harness Connection	Anchorage Connection	Special Features	Standard length'
MILLER MANYARD SHOCK-ABSORBING LANYARDS ANSI A10.32
216WLS/6FTYL	Yeliowweb	One	Locking snap hook	Locking snap hook	Warning flag	6-ft. 11.8 m!
219WRS/6FTYL	Yeliowweb	One	Locking snap hook	Locking rebar hook	Warning flag	6-ft. 11.8 m!
231 WRS/6FTYL	Yeliowweb	Two	Locking snap hook	Locking rebar hooks	Warning flag	6-ft. 11.8 m!
232WLS/6FTYL	Yeliowweb	Two	Locking snap hook	Locking snap hooks	Warning flag	6-ft. 11.8 m!
233WLS/6FTYL	Yeliowweb	One	Choke-off loop	Locking snap hook	Warning flag	6-ft. 118 m!
MILLER MANYARD HP SHOCK-ABSORBING LANYARDS ANSI Z359
216TWLS-Z7/6FTG N	Green web	One	Locking snap hook	Locking snap hook	Warning flag	6-ft. (1.8 m)
219TWRS-Z7/6FTGN	Green web	One	Locking snap hook	Locking rebar hook	Warning flag	6-ft. (1.8 m)
231TWRS-Z7/6FTGN	Green web	Two	Locking snap hook	Locking rebar hooks	Warning flag	6-ft. (1.8 m)
232TWLS-Z7/6FTGN	Green web	Two	Locking snap hook	Locking snap hooks	Warning flag	6-ft. (1.8 m)
233TWLS-Z7/6FTGN	Green web	One	Choke-off loop	Locking snap hook	Warning flag	6-ft. (1.8 m)
MILLER MANYARD HP SHOCK-ABSORBING LANYARDS ANSI A10.32
216TWLS/6FTGN	Green web	One	Locking snap hook	Locking snap hook	Warning flag	6-ft. (1.8 m)
219TWRS/6FTGN	Green web	One	Locking snap hook	Locking rebar hook	Warning flag	6-ft. (1.8 m)
231TWRS/6FTGN	Green web	Two	Locking snap hook	Locking rebar hooks	Warning flag	6-ft. (1.8 m)
232TWLS/6FTGN	Green web	Two	Locking snap hook	Locking snap hooks	Warning flag	6-ft. (1.8 m)
233TWLS/6FTGN	Green web	One	Choke-off loop	Locking snap hook	Warning flag	6-ft. (1.8 m)
233TWRS/6FTGN	Green web	One	Choke-off loop	Locking rebar hook	Warning flag	6-ft. (1.8 m)
266TWLS/6FTGN	Green web	Two	Choke-off loop	Locking snap hooks	Warning flag	6-ft. (1.8 m)
266TWRS/6FTGN	Green web	Two	Choke-off loop	Locking rebar hooks	Warning flag	6-ft. (1.8 m)
*Available in lengths from 4-ft. (1..2 m) to 10-ft. (3m). Locking Snap Hook - 3/4-in. (19 mm) gate opening; Locking Rebar Hook - 2-1/2-in. (64 mm) gate opening.

**Miller Manyard II Stretchable Shock Absorbing Lanyards**

FEATURES Manyard II Lanyards contract 6-ft. (1.B m) to 4-ft. (1.2 m), greatly reducing the chances of tripping, snagging, or dragging Specially-woven shock-absorbing inner core smoothly expands to reduce fall arrest forces A heavy-duty outer jacket serves as a wear indicator and back-up strap to the red inner core for added safety Working load of 310-lbs. (140.6 kg) and features a warning flag to indicate that it has arrested a fall
SKU	Material	Number of legs	Harness Connection	Anchorage Connection	Special Features	Standard length'
MILLER MANYARD II STRETCHABLE SHOCK-ABSORBING LANYARDS
ANSI Z359
216M-Z7/6FTGN	Webbing	One	Locking snap hook	Locking snap hook	Warning flag / Red core wear indicator	6-ft. (1.8 m)
219M-Z7/6FTGN	Webbing	One	Locking snap hook	Locking rebar hook	Warning flag / Red core wear indicator	6-ft. (1.8 m)
231M-Z7/6FTGN	Webbing	Two	Locking snap hook	Locking rebar hooks	Warning flag / Red core wear indicator	6-ft. (1.8 m)
232M-Z7/6FTGN	Webbing	Two	Locking snap hook	Locking snap hooks	Warning flag / Red core wear indicator	6-ft. (1.8 m)
233MORS-Z7/6FTGN	Webbing	One	Choke-off loop & "O" Ring extension	Locking rebar hook	Warning flag / Red core wear indicator	6-ft. (1.8 m)
ANSI A10.32
216M/6FTGN	Webbing	One	Locking snap hook	Locking snap hook	Warning flag / Red core wear indicator	6-ft. (1.8 m)
219M/6FTGN	Webbing	One	Locking snap hook	Locking rebar hook	Warning flag / Red core wear indicator	6-ft. (1.8 m)
231M/6FTGN	Webbing	Two	Locking snap hook	Locking rebar hooks	Warning flag / Red core wear indicator	6-ft. (1.8 m)
232M/6FTGN	Webbing	Two	Locking snap hook	Locking snap hooks	Warning flag / Red core wear indicator	6-ft. (1.8 m)
233M/6FTGN	Webbing	One	Choke-off loop	Locking snap hook	Warning flag / Red core wear indicator	6-ft. (1.8 m)
'Available in lengths from 4-ft. (1.2m) to 10-ft. (3m). Locking Snap Hook - 3/4-in. (19mm) gate opening; Locking Rebar Hook - 2-1/2-in. (64 mm) gate opening.

**Miller StretchStop Lanyards with SofStop Shock Absorber**

FEATURES Stretch Stop lanyards contract 6-ft. 17.8 m) to 4-ft. (1.2 m), greatly reducing the chances of tripping, snagging, or dragging Includes a heavy-duty back-up safety strap SofStop Shock Absorber pack is designed with a specially-woven inner core that smoothly expands to reduce fall arrest forces
SKU	Material	Number of legs	Harness Connection	Anchorage Connection	Standard Length*
MILLER STRETCHSTOP LANYARDS WITH SOFSTOP SHOCK ABSORBER
ANSI Z359
913SS-Z7/6FTGN	Webbing	One	Locking snap hook	Locking snap hook	6-ft. (1.8 m)
913RSS-Z7/6FTGN	Webbing	One	Locking snap hook	Locking rebar hook	6-ft. (1.8 m)
8798SS-Z7/6FTGN	Webbing	Two	Locking snap hook	Locking snap hooks	6-ft. (1.8m)
8798RSS-Z7/6FTGN	Webbing	Two	Locking snap hook	Locking rebar hooks	6-ft. (1.8 m)
ANSI A10.32
913SS/6FTGN	Webbing	One	Locking snap hook	Locking snap hook	6-ft. (1.8 m)
913RSS/6FTGN	Webbing	One	Locking snap hook	Locking rebar hook	6-ft. (1.8 m)
8798SS/6FTGN	Webbing	Two	Locking snap hook	Locking snap hooks	6-ft. (1.8 m)
8798RSS/6FTGN	Webbing	Two	Locking snap hook	Locking rebarhooks	6-ft. (1.8 m)
Available in lengths from 4-ft. (1.2 m) to 10-ft. (3 m). Locking Snap Hook - 3/4-in. (19 mm) gate opening; Locking Rebar Hook - 2-1/2-in. (64 mm) gate opening.

**Miller HP Lanyards with SofStop Shock Absorber**

The Miller HP lanyards are a collection of the most popular standard Miller brand lanyards with SofStop Shock Absorbers. FEATURES SofStop Shock Absorber pack is designed with a specially-woven inner core that smoothly expands to reduce fall arrest forces Includes heavy-duty back-up safety strap
SKU	Material	Number of Legs	Harness Connection	Anchorage Connection	Special Features	Standard Length
MILLER HP LANYARDS WITH SOFSTOP SHOCK ABSORBER
ANSI Z359
910TWlS-Z7!6FTGN	Webbing	One	Locking snap hook	Locking snap hook	Adjustable	6-ft. (1.8 m)
913TWlS-Z7/3FTGN	Webbing	One	Locking snap hook	Locking snap hook	-	3-ft. (.91 m)
913TWlS-Z7/6FTGN	Webbing	One	Locking snap hook	Locking snap hook	-	6-ft. (1.8 m)
8798T-Z7/6FTGN	Webbing	Two	Locking snap hook	Locking snap hooks	-	6-ft. (1.8 m)
8798TR-Z7/6FTGN	Webbing	Two	Locking snap hook	Locking rebar hooks	-	6-ft. (1.8 m)
ANSI A10.32
910TWlS/6FTGK	Webbing	One	Locking snap hook	Locking snap hook	Adjustable	4-ft. (1.2 m) to 6-ft. (1.8m)
913TWlS/6FTGK	Webbing	One	Locking snap hook	Locking snap hook	-	6-ft. (1.8 m)
922TWRS/6FTGK	Webbing	One	Locking snap hook	Locking rebar hook	-	6-ft. (1.8 m)
8798T/6FTGN	Webbing	Two	Locking snap hook	Locking snap hooks	-	6-ft. (1.8 m)
8798TR!5FTGN	Webbing	Two	Locking snap hook	Locking rebar hooks	-	6-ft. (1.8 m)
8798TR/6FTGN	Webbing	Two	Locking snap hook	Locking rebar hooks	-	6-ft. (1.8 m)
8878T/6FTGN	Webbing	Two	Locking snap hook	Locking snap hooks	Adjustable	4-ft. (1.2 m) to 6-ft. (1.8m)
8878TR/6FTGN	Webbing	Two	Locking snap hook	Locking rebar hooks	Adjustable	4-ft. (1.2 m) to 6-ft. (1.8m)
Locking Snap Hook - 3/4-in. (19mm) gate opening; Locking Rebar Hook - 2-1/2-in. (64 mm) gate opening.

**Miller Rope, Wire Rope and Web Lanyards with SofStop Shock Absorber**

SofStop Shock Absorber pack is designed with a specially-woven inner core that smoothly expands to reduce fall arrest forces.
SKU	Material	Number of Legs	Harness Connection	Anchorage Connection	Special Features	Standard Length
MILLER LANYARDS WITH SOFSTOP SHOCK ABSORBER
ANSI A10.32
928LS/181NYL	-	N/A	Locking snap hook	D-ring	-	18-in. (457 mm)
901 RLS-216FTWH*	Rope	One	Locking snap hook	locking snap hook	-	6-ft. (1.8 m)
903RLS-216FTWH*	Rope	One	Locking snap hook	locking snap hook	Adjustable	4-ft. (1.2 m) to 6-ft. (1.8m)
907LS/6FTYL	Wire rope	One	Locking snap hook	Locking snap hook	-	6-ft. (1.8 m)
907NLS/6FTYL	Vinyl-coated wire rope	One	Locking snap hook	Locking snap hook	-	6-ft. (1.8 m)
910WLS/6FTYL	Webbing	One	Locking snap hook	Locking snap hook	Adjustable	4-ft. (1.2 m) to 6-ft. (1.8m)
913WLS/6FTYL	Webbing	One	Locking snap hook	Locking snap hook	-	6-ft. (1.8 m)
940WLS/6FTGN	Webbing	One	Locking snap hook	Locking snap hook	SofStop Double Pack**	6-ft. (1.8 m)
980WLS/6FTGN	Webbing	Two	Locking snap hook	Locking snap hook	SofStop Double Pack**	6-ft. (1.8 m)
8798/6FTYL	Webbing	Two	Locking snap hook	Locking snap hooks	-	6-ft. (1.8 m)
8798R/6FTYL	Webbing	Two	Locking snap hook	Locking rebar hooks	-	6-ft. (1.8 m)
To order polyester rope. add "-5". to the corresponding SKU number (Ex.: 903RLS-5/6FTWH). *SofStop Double Pack for 12-ft. (3.7 m) free fall. Duty-rated 400 lbs. (181.4 kg) capacity. Locking Snap Hook - 3/4-in. (l9mm) gate opening; Locking Rebar Hook - 2-1/2-in. (64 mm) gate opening.

**Miller Vinyl Coated Shock Absorbing Lanyards**

Miller Vinyl-Coated Shock-Absorbing Lanyards feature a special vinyl coating on the webbing to protect against a variety of liquids that could compromise overall performance. Miller Vinyl-Coated Products are effective in a wide range of applications, including: Food Processing, Petrochemical, Water Treatment, Painting, Billboards and General Industry. FEATURES SofStop Shock Absorber pack is designed with a specially-woven inner core that smoothly expands to reduce fall arrest forces Includes heavy-duty back-up safety strap Zinc-plated steel snap hooks User-rated to 310 lbs. (140.6 kg)
SKU	Material	Number of Legs	Harness Connection	Anchorage Connection	Standard Length
MILLER VINYL-COATED SHOCK-ABSORBING LANYARDS ANSI A10.32
913PC/6FTGN	Vinyl-coated webbing	One	Locking snap hook	Locking snap hook	6-ft. (1.8m)
922PCR/6FTGN	Vinyl-coated webbing	One	Locking snap hook	Locking rebar hook	6-ft. (1.8m)
8798PC/6FTGN	Vinyl-coated webbing	Two	Locking snap hook	Locking snap hooks	6-ft. (1.8m)
8798PCR/6FTGN	Vinyl-coated webbing	Two	Locking snap hook	Locking rebar hooks	6-ft. (1.8m)

**Miller Rope Grabs**

Miller Rope Grabs move easily up and down vertical lifelines to provide continuous fall protection. Trailing models offer complete hands-free operation for increased productivity. In the event of a fall, Miller rope grabs lock quickly. FEATURES Compact design; corrosion-resistant stainless steel construction Lightweight and easy to use Rated to 310-Ibs. (140.6 kg) capacity
SKU	Description
MILLER ROPE GRABS
ANSI Z359
8175-Z7/	Trailing Rope Grab - Stainless steel trailing rope grab w/anti-panic feature for use with 5/8-in. (16 mm) rope
8175SLS-Z7/3FTYL	Trailing Rope Grab - 8175-Z7/ with attached 3-ft. SofStop shock-absorber for use with 5/8-in. rope
ANSI A10.32
8172/U	Miller MicroLoc Trailing Rope Grab - Compact, stainless steel trailing rope grab for use with 5/16-in. wire rope
8173/U	Miller MicroLoc Trailing Rope Grab - Compact, stainless steel trailing rope grab for use with 5/8-in. rope
8174/U	Manual Rope Grab - Stainless steel manual rope grab for use with 5/8-in. (16 mm) or 3/4-in. (19 mm) synthetic rope
8174MLS4/4FTYL	Manual Rope Grab - 8174 w/attached 4-ft. Manyard shock-absorbing lanyard w/locking snap hook
8174RLS/2FTWH	Manual Rope Grab - 8174 w/attached 2-ft. (.6m) rope lanyard w/locking snap hook
8174WLS/2FTYL	Manual Rope Grab - 8174 w/attached 2-ft. (0 6 III} web lanyard w/locking snap hook
98174LS/3FTYlU	Manual Rope Grab - 8174 w/attached SofStop shock absorber w/locking snap hook
8175/U	Trailing Rope Grab - Stainless steel trailing rope grab for use with 5/8-in. (16mm) rope
8175RLS/2FTWH	Trailing Rope Grab - 8175 w/attached 2-ft. (6m) rope lanyard w/locking snap hook
8175WLS/3FTYL	Trailing Rope Grab - 8175 w/attached 3-ft. (1 m}web lanyard w/locking snap hook
8175SLS/3FTYL	Trailing Rope Grab - 8175 w/SofStop shock absorber w/locking snap hook
CSA
8174/C	Manual Rope Grab - Stainless steel manual rope grab w/anti-panic feature for use with 5/S-in. (16 mm) or 3/4-in. (19 111m) synthetic rope
8175/C	Trailing Rope Grab - Stainless steel trailing rope grab w/anti-panic feature for use with 5/8-in. (16 mm) rope
Locking Snap Hook - 3/4-in. Gate opening.

**Miller Lifelines**

Synthetic rope lifeline with a minimum tensile strength of 5,000 Ibs. (22 kN). Standard lifeline lengths are 25 ft. (7.6 m), 50 ft. (15 m), 75 ft. (23 m), and 100 ft. (30m); additional lengths are available.
SKU	Description
MILLER LIFELINES
ANSI Z359
300L-Z7/25FTBL	5/8-in. (16 mm) diameter polyester/polypropylene blend rope w/locking snap hook & loop; 25-ft. (7.6 m)
300L-Z7/50FTBL	5/8-in. (16 mm) diameter polyester/polypropylene blend rope w/locking snap hook & loop; 50-ft. (15 m)
300L-Z7/100FTBL	5/8-in. (16 mm) diameter polyester/polypropylene blend rope w/locking snap hook & loop; 100-ft. (30 m)
ANSI A10.32
194R-2*	Nylon rope lifeline w/carabiner & thimble; 5/8-in. (16 mm) diameter
194R-5*	Polyester rope lifeline for greater chemical resistance w/ca rabiner & thimble; 5/S-in. (16 mm) dia meter
195R-2*	Nylon rope lifeline w/thimbles; 5/S-in. (16 mm) diameter
195R-5*	Polyester rope lifeline for greater chemical resista nce w/thimbles; 5/8-in. (16 mm) diameter
300L/25FTBL	25-ft. (7.6 m); constructed of 5/8-in. (16 mm) polyester/polypropylene blend rope; locking snap hook & loop
300L/30FTBL	30-ft. (9 m); constructed of 5/8-in. (16 mm) polyester/polypropylene blend rope; locking snap hook & loop
300L/50FTBL	50-ft. (15 m); constructed of 5/8-in. (16 mm) polyester/polypropylene blend rope; locking sna p hook & loop
300L/75FTBL	75-ft. (23 m); constructed of 5/8-in. (16 mm) polyester/polypropylene blend rope; locking sna p hook & loop
300L/l00FTBL	100-ft. (30m); constructed of 5/8-in. (16mm) polyester/polypropylene blend rope; locking snap hook & loop
*Must specify length when ordering.

**Miller Safety Straps**

NF Series: A 1-3/4-in. (44 mm) wide, 100% nylon safety strap offers a friction buckle to adjustthe length of the strap quickly and easily. YR: Series Strong safety strap, made of a six-ply nylon, remains flexible in all types of weather conditions. Tongue buckle adjuster included for quick, safe adjustment.
SKU	Description	Length
MILLER NF SERIES SAFETY STRAPS
ANSI A10.32
6NFLS/6FTYL	1-3/4-in. (44 mm) Wide, 100% nylon safety strap w/ friction buckle	6-ft. (1.8 m) length
7NFLSnFTYL	1-3/4-in. (44 mm) wide, 100% nylon safety strap w/ friction buckle	7-ft. (2.1 m) length
MILLER YR SERIES SAFETY STRAPS
ANSI A10.32
6YRLS/6FTBR	Strong, six-ply nylon safety strap w/tongue buckle adjuster	6-ft. (1.8 m) length
7YRLSnFTBR	Strong, six-ply nylon safety strap w/tongue buckle adjuster	7-ft. (2.1 m) length

**Miller StopFall Fall Restraint System**

The Miller StopFall System provides a user-friendly and reliable work positioning and fall arrest system for climbing wooden poles. The StopFal1 System is specifically designed with a 75-in. (1,905 mm) pole strap (maximum length) and features a 21-in. (533 mm) security strap with unique gaffs that "bite" into wooden poles. Meets CSA Standard Z259.14-99 for Type A and Type AB. The polyester pole strap comprises: An integral steel reinforcement band, which prevents "hour-glassing" and maintains shape A rugged neoprene wear pad for increased service life Double-locking snap hooks and length adjuster assembly Two-piece spring assembly to prevent a continual electric path Stainless steel dome stops to prevent the security strap from inadvertently sliding off the end of the wear pad Specially designed security strap: Corrosion-resistant, stainless steel hardware Spring-loaded gaffs that provide instant grip on wooden poles Nylon rollers permit free movement of the gaffs and minimize abrasion on the strap A disconnect and length adjuster with a "parking" feature for when the security strap is not in use
SKU	Description
7600A	Fits wood pole size 25-in. to 50-in. (635mm - 1,270mm) circumference. Friction buckle adjustment.
7600B	Fits wood pole size 25-in. to 50-in. (635 mm - 1,270 mm) circumference. Tongue buckle adjustment.

**Miller Aerial Bucket Kit**

Model 8112l/UGN The Miller Aerial Bucket Kit offers a complete personal fall arrest system for buckettruck applications. The kit includes: DuraFlex® Utility Harness (Model E752/UGN) Manyard® II Shock-Absorbing Lanyard (Model 233M/6FTGN) Aerial Lift Boom Strap (Model 6404/50INYL)

**Miller Aerial Lift Rescue Ladder**

The Miller Aerial Lift Self-Rescue Ladder is a portable 15-ft. (4.6 m) web ladder designed and intended to assist with self-rescue for applications such as aerial lifts, bucket trucks, and elevated work surfaces. In the event of a fall, the user releases the ladder by pulling on the drawstring and then climbs back to the work surface.
SKU	Length
9058/15FT	15-ft. (4.6 m) Aerial Lift Self-Rescue Ladder
9058/25FT	25-ft. (7.6 m) Aerial Lift Self-Rescue Ladder
9058/30FT	30-ft. (9.1 m) Aerial Lift Self-Rescue Ladder

**Miller HP & Miller Positioning and Restraint Lanyards**

Wire Rope and Web Lanyards recommended for "work positioning" and "restraint" only. FEATURES Rope lanyards are available in standard nylon or polyester (for greater chemical resistance) to meet user needs Wire rope lanyards are heat resistant and highly abrasion resistant Standard web lanyards are economical, abrasion resistant and easy to clean
SKU	Material	Harness Connection	Anchorage Connection	Special Feature	Length*
MILLER HP POSITIONING AND RESTRAINT LANYARDS
ANSI Z359
210TWLS-Z7/6FTGN	Webbing	Locking snap hook	Locking snap hook	Adiustable	6-ft. (1.8 m)
213TWLS-Z7/6FTGN	Webbing	Locking snap hook	Locking snap hook	-	6-ft. (1.8 m)
8928-Z7/18INBK	D-ring extension
MILLER POSITIONING AND RESTRAINT LANYARDS
ANSI A10.32
198RLS/6FTWH'*	Nylon rope	Choke-off loop	Locking snap hook	-	6-ft. (1.8 m)
201RLS/6FTWH**	Nylon rope	Locking snap hook	Locking snap hook	-	6-ft. (1.8 m)
202RRS/6FTWH**	Nylon rope	Locking snap hook	Locking rebar hook	-	6-ft. (1.8 m)
203RLS/6FTWH**	Nylon rope	Locking snap hook	Locking snap hook	Adjustable	6-ft. (1.8 m)
204RLS/6FTWH**	Nylon rope	Locking snap hook	Thimble for attaching a carabiner	-	6-ft. (1.8 m)
207LS/6FTG	Wire rope	Locking snap hook	Locking snap hook	-	6-ft. (1.8 m)
207NLS/6FTV	Vinyl-coated wire rope	Locking snap hook	Locking snap hook	-	6-ft. (1.8 m)
210WLS/6FTYL	Polyester webbing	Locking snap hook	Locking snap hook	Adiustable	6-ft. (1.8 m)
212WLS/6FTYL	Polyester webbing	Locking snap hook	Web loop	-	6-ft. (1.8 m)
213WLS/6FTYL	Polyester webbing	Locking snap hook	Locking snap hook	-	6-ft. (1.8 m)
226WRS/6FTYL	Polyester webbing	Locking snap hook	Locking rebar hook	-	6-ft. (1.8 m)
*Additional lengths are available. "To order polyester rope, add "-5" to the corresponding model number (Ex: 201 RLS/6FTWH becomes 201 RLS-5/6FTWH). Locking Snap Hook - 3/4-in. (19mm) gate opening; Locking Rebar Hook - 2-1/2-in. (64mml gate opening.

**Miller Positioning Assemblies**

SKU	Description
MILLER POSITIONING ASSEMBLIES
ANSI Z359
6756RS-Z7	Rebar chain assembly w/locking rebar hook, attached swivel & two locking snap hooks
6757WRS-Z7/35INGN*	Rebar web assembly w/locking rebar hook & two locking snap hooks
ANSI A10.32
6756RS/	Rebar chain assembly w/two locking snap hooks & one locking rebar hook; swivel attachment & length adjuster
6756RS4/	4-link rebar chain assembly w/two locking snap hooks & one locking rebar hook; swivel attachment
6757WRS/35INGN*	1-in. (25 mm) nylon web positioning assembly w/two locking snap hooks & one locking rebar hook `
Also available in 27-in. (685 mm) or 40-in. (1016 mm) lengths.* Locking Snap Hook - 3/4-in. (19mm) gate opening; Locking Rebar Hook - 2-1/2-in. (64 mml gate opening.

**Miller Grip Anchorage Connectors**

Anchorage Connectors are designed as the intermediary for securing a connecting device to an anchorage. Careful consideration should be given to selecting a proper anchorage for ultimate safety. The anchorage should be easily accessible, located a safe distance above any lower obstacles and support 5,000 Ibs. (22 kN) per worker. Miller Grip™ Anchorage Connectors A safe anchor point is established when the Miller Grip Anchor is inserted into a properly-sized, cured concrete hole. Designed for use in cured concrete with a compression strength of at least 3,000 psi (20.7 MPa) , it can be used for vertical or overhead/ceiling surface applications. FEATURES The reusable Miller Grip Anchor can be removed and simply re-installed in a new location Miller Grip Anchor (SKU 497/) can be used with SkyGrip Horizontal Lifeline components for a two-person system (see SkyGrip Kit [SG497/60FT) for details) Multi-use Grip Anchors can be used for anchoring scaffolding, material handling and removal of concrete debris after demolition Constructed of stainless steel, aluminum and other non-corrosive materials for a longer service life Color-coded to differentiate fall protection use per OSHA regulations
SKU	Hole Diameter	Description
496/	3/4-in. (19 mm)	5,000-lb. (2.268 kg) ultimate strength; for single user connection; 400-lbs. (181 kg) maximum capacity; color-coded green
497/	1-in. (25 mm)	10,000-lb. (4,536 kg) ultimate strength; for single user connection; 400-lbs. (181 kg) maximum capacity; color-coded green
498/	3/4-in. (19 mm)	1,000-lb. (454 kg) max. safe working load for multi-use connection (NOT for fall protection use)
499/	1-in. (25 mm)	2,000-lb. (907 kg) max. safe working load for multi-use connection (NOT for fall protection use)

**Miller Grip Friction Bolt Anchorage Connector**

A portable/reusable anchorage connector, designed exclusively for use with a friction bolt. A safe anchor point for a single user is established when the Miller Grip Friction Bolt Anchor (SKU 494/) is inserted into a friction bolt with an outside diameter of 1-1/2 in. (38 mm). FEATURES Multiple applications: Mine shafts, railway or road tunnels and underground storage caverns The reusable Miller Grip Friction Bolt Anchorage Connector can be removed and simply re-installed in a new location Constructed of stainless steel, aluminum and other non-corrosive materials for a longer service life Miller Grip Friction Bolt Anchor (SKU 494/) can be used with SkyGrip Horizontal Lifeline components for a two-person system
SKU	Weight	Description
494/	1 lb. (.5 kg)	Grip anchor for single user 400-lbs. (181 kg) maximum capacity, designed exclusively to accommodate a friction bolt with an outside diameter of 1-1/2 in. (38 mm)

**Miller Shadow Adjustable and Fixed Beam Anchors**

Miller Shadow Adjustable and Fixed Beam Anchors connect horizontally to a wide range of I and H beam flanges from 3-in. (76 mm) to 24-in. (610 mm) wide and up to 2-1/2-in. (64 mm) thick. Once attached, the beam anchor (SKUs 8814 and 8816) slides along the beam with the worker to provide increased safety, mobility and productivity. The fixed beam anchors (SKU 8815) are designed to be tightened horizontally or vertically, firmly gripping the beam or column to provide a temporary or permanent anchorage attachment.
SKU	Description	Fits Flange Sizes
MILLER SHADOW ADJUSTABLE & FIXED BEAM ANCHORS
8814-12/	Lightweight, adjustable Shadow Beam Anchor - stainless steel & high-strength aluminum	4-in. to 12-in. (102 mm to 305 mm)
8814-24/	Lightweight, adjustable Shadow Beam Anchor - stainless steel & high-strength aluminum	12-in. to 24-in. (305 mm to 610 mm)
8815-12/	Lightweight, fixed Shadow Beam Anchor - stainless steel & high-strength aluminum	4-in. to 12-in. (102 mm to 305 mm)
8815-24/	Lightweight, fixed Shadow Beam Anchor - stainless steel & high-strength aluminum	12-in. to 24-in. (305 mm to 610 mm)
8816-14/	Lightweight, adjustable ShadowLite Beam Anchor - high-strength aluminum & bronze; 4.2Ibs. (2 kg)	3-in. to 14-in. (76 mm to 356 mm)
MILLER SHOCK-ABSORBING WEB LANYARDS FOR USE WITH MILLER SHADOW ADJUSTABLE & FIXED BEAM ANCHORS
ANSI Z359
940WLS-Z7/6FTGN	Single leg, 6-ft. (1.8 m) shock-absorbing web lanyard w/Double So/Stop pack, two locking snap hooks (designed for 12-ft. [3.7m] fall- use w/beam anchors)
ANSI A10.32
940WLS/6FTGN	Single leg, 6-ft. (1.8 m) shock-absorbing web lanyard w/Double SofStop pack, two locking snap hooks (designed for 12-ft. [3.7mlfall- use w/beam anchors)

**Miller Edge Fall Protection System**

The first and only cost-effective, portable, engineered anchorage solution designed to protect workers engaged in leading edge deck construction. The Miller Edge System reduces the need for a safety monitor or a temporary cable lifeline system on leading edge deck construction. FEATURES Freestanding, mobile overhead anchor point Solid wheel casters Two integral eye bolt attachment points accommodate self-retracting lifelines Predetermined integral lifting points Heavy-duty steel construction with protective enamel paint Easy access handles on front and rear Applications: Concrete deck construction, bridge decks, window washing, vault entry, rescue situations
SKU	Description
9081/	Standard Miller Edge with 7-1/2-ft. (2.3 ml anchorage height
9081/6.5FT	Miller Edge with 6-1/2-ft. (2 m) anchorage height
9081/9.5FT	Miller Edge with 9-1/2-ft. (2.9 m) anchorage height; includes 300-lb. (136 kg) additional required counterweight
9081/VBK-9.5	9-1/2-ft. (2.9 m) height conversion kit; includes 90Bl/VB-9.5 & 9081WT/300LB; converts a Standard Edge System (9081/) into a 9-1/2-ft. (2.9 m) high anchorage system
9081/VB-9.5	Vertical boom for 9-1/2-ft. (2.9 m) high Edge System; boom measures 108 in. (2.7 m)
9081/VB-6.5	Vertical boom for 6-1/2-ft. (2 m) high Edge System; boom measures 72 in. (/.8 m)
9081WT/300LB	Set of 300-lb. (/36 kg) counterweights required for 9-1/2-ft. (2.9 m) high Edge System
9081MRMB	MightEvac Bracket for Edge System; holds 1 or 2 units (MightEvac units, brackets & pulleys sold separately)
9082/	Swivel Bracket (retrofit) for 20-ft. (6 m) & 30-ft. (9m) MightyLite SRL units (optional)
9083/	Swivel Bracket (retrofit) for 50-ft. (15m) & 65-ft. (20m) MightyLite SRL units (optional)
All Miller brand lall protection products meet applicable OSHA, ANSI and CSA requirements.

**Miller Temporary Anchorage Connectors**
	Cross-Arm Anchorage Connectors 6-ft. (I.8 m) web Cross-Arm Strap wraps around I-beams and other structures and attaches with a 2-in. (57 mm) D-ring that slips through a 3-in. (76 mm) D-ring to form a secure attachment point for lanyards and other connecting devices. 400-lbs. (l87 kg) maximum capacity. 8183/3FTGN 8183/6FTGN		Looped Cross-Arm Anchorage Connectors The 6-ft. (I.8 m), 2-in. (57 mm) web strap features a 2-in. (50 mm) D-ring which slips through looped webbing. 400-lbs. (l87 kg) maximum capacity. 8185/3FTGN 8185/6FTGN
	Push- Thru Eye Bolt Anchors Spring-action anchorage connector offers simple one-hand installation and can be used for a wide range of applications. Fits 3/4-in. (79 mm) dia. holes and includes the integral SofStop Shock Absorber. 400-lbs. (787 kg) maximum capacity. 420/22IN 420NS/22IN (without shock absorber)		Wire Hook Anchor Stainless steel Wire Hook connects to various approved anchorages including railings, small I-beams, angle iron and scaffolding. Simply squeeze the springloaded hook and slip the large opening over the approved structure. 400-lbs. (787 kg) maximum capacity. 470/
	Rebar Hook Anchor Oesigned to facilitate anchoring to scaffolding, pipe or angle iron, and features a locking rebar hook with SofStop Shock Absorber and a D-ring on the other end to accommodate the connecting device. 400-lbs. (787 kg) maximum capacity. 485/221NYL		Extension Pole and Hook Anchors The 20-ft. (6 m) fiberglass pole and springloaded hook is ideal for use with climbing ladders and towers. Installs fall arrest systems up to 20 ft. (6 m) from ground level to angle iron, piping and related structures. 400-lbs. (787 kg) maximum capacity. 475/ 475-1/ (Anchor Hook only) 475-2/ (Anchor Extension Pole only)
	Cross-Arm Chain Anchor The 6-ft. (7.8 m) Chain Anchor provides a single user with an easy-to-install, temporary anchorage connector. It easily wraps around I-beams or other structures. This product safely wraps around corners and sharp edges and is ideal to use in environments where chemical, heat or welding splatter may occur. 400-lbs. (787 kg) maximum capacity. 440/6FT		Rebar Hook Anchors Designed to facilitate anchoring to scaffolding, pipe or angle iron, and features a locking rebar hook for easy, one-hand installation and a D-ring on the other end to accommodate the connecting device. 400-lbs. (787.4 kg) maximum capacity. 480-Z7/19INGN (ANSI Z359) 480/191NGN (ANSI A 10.32)
	Beam Trolley The Beam Trolley is adjustable and slides along with the worker to provide maximum mobility. 9065 adjusts to fit beam flanges from 3-in. (76 mm) to 4-1/2-in. (114 mm) wide. Lightweight Beam Trolley Retrofit Kits: 9065-1 Kit converts 9065 beam trolley to accommodate I-beams up to 8-1/2-in. (216 177m) wide. 9065-2 Kit converts 9065 beam trolley to accommodate I-beams up to 12-in. (305 mm) wide. 400-lbs. (181.4 kg) maximum capacity.		Beam Clamps The Beam Clamp is a steel anchor point that can be attached to horizontal I-beams, S-beams or W-beams. Its swivel attachment ring prevents twisting of the worker's connecting device. 450/ accommodates beams with a maximum width of 9 in. (229mm). 455/ accommodates beams with a maximum width of 12-1/2 in. (318 mm). 400-lbs. (181.4 kg) maximum capacity.

**More Miller Temporary Anchorage Connectors**

Concrete D-Bolt The Concrete D-Bolt Anchorage Connector (417C/) includes a 5/8-in. (16 mm) stud-type expansion anchor that is ideal for applications with concrete and lightweight concrete that meet required specifications (min. 2,000 psi [13.8 MPa]). Can be installed on a vertical wall or overhead for versatility. Concrete Expansion Bolt (417CBOLT/) available separately	Disposable Concrete Anchor Strap The Disposable Concrete Anchor Strap (8185CX) is uniquely designed to provide temporary anchorage on concrete forms. Constructed of 1-3/4-in. (44 mm) wide, abrasion-resistant webbing. Forged steel D-ring (8185C) is capable of withstanding 5,000 Ibs. (22 kN). Standard lengths of 2 ft. (.6 m) and 4 ft. (1.2 m); additional lengths available. Also available with web loop (includes inner-wear pad for carabiner attachment).	Cable Anchorage Connector Cable Anchorage Connectors create quick, easy and secure points of attachment. Constructed of 1/4-in. (6 mm) vinyl-coated, galvanized wire rope and a steeI3-in. (76 mm) D-ring. Standard length is 6 ft. (I.8m); additional lengths available. 8187V features a forged steel, auto-lock, captive eye carabiner with l-in. (25 mm) gate opening. 8186V features a locking snap hook with 3/4-in. (19 mm) gate opening. 400-lbs. (181.4 kg) maximum capacity.

**Carabiners**

Steel twist-lock carabiner; l-in. (25 mm) gate opening. Meets ANSI Z359 17D-1/	Large, steel twist-lock carabiner; 2-in. (51 mm) gate opening. Meets ANSI Z359 18D-1/

Lightweight, aluminum twist-lock carabiner; l-in. (25 mm) gate opening. 17D-2/ Same as 17D-2 with triple-action feature. 17D-3/	Large, aluminum twist-lock carabiner; 2-1/4-in. (57 mm) gate opening. 18D-2/

**Miller Permanent Anchorage Connectors**

Mounted D-Ring Steel D-Ring Anchor with plate, complete with 4-3/8-in. (111 mm) diameter bolts, lockwashers, nuts and drilling template. 410/	D-Bolt Anchor 1/2-in. (13 mm) diameter D-Bolt Anchor; 1-1/4-in. (32mm) long; one-piece unit with lockwasher and nut. 415/

D-Bolt Anchor D-Bolt Anchor for up to 4-in. (102 mm) working thickness includes a 5/8-in. (16 mm) diameter bolt with lockwasher and nut. 416/ Stainless steel D-Bolt Anchor available (416SS/). D-Bolt Anchor without hardware sold separately. 417/ Stainless steel D-Bolt Anchor available (417SS/).

WSP home page	Products page	Suppliers page
Fall Protection	Miller Fall Index	Previous Miller Page	Next Miller Page