For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.
 |
| Enforcer Easy to use bump testing/calibration station • Portable bump test and calibration docking station • Test and calibrate an Impact/Impact Pro within two minutes • Reduce instrument downtime • No need for third party maintenance • Lightweight, portable design for use anywhere • Calibration history recorded by Impact |
| Use | Test and calibration accessory for use with Impact multigas monitor when fitted with oxygen, flammable, carbon monoxide and hydrogen sulfide sensors |
| Technique | A controlled amount of gas is applied to the instrument. The response is compared against historical data obtained during manufacture and if within tolerance automatic adjustment of readings is made |
| Construction | Poly Carbonate |
| Dimensions | 170mm x 145mm x 560mm * (7” x 5.7” x 22”) * *Maximum length includes cylinder and sliding tray in open position |
| Weight | 1.34Kg (47oz) |
| Ordering information | Enforcer with multi gas cylinder: 2302B0831 (EN50054), 2302B1336 (EN61778) Enforcer excluding multi gas cylinder: 2302B0650 |
| Multi gas Cylinder Specification | |
| Contents | 100ppm Carbon Monoxide |
| 40ppm Hydrogen Sulfide |
|
| 2.5% Methane (CH4) |
|
| 15% Oxygen |
|
| Nitrogen balance | |
| Accuracy | +/-5% |
| Number of applications per cylinder (calculated) |
>200 |
| Type | 2AL |
| Standards | Europe - One fill valve in accordance with prEN12205 |
| USA / R.O.W. - DOT 39 Standard | |
| Dimensions (approx.) | 80mm x 240mm (3.1” x 9.5”) |
| Weight | 0.44Kg (16oz) |
| Pressure | 34 bar (maximum) |
| Ordering information | Multi gas calibration gas cylinder: 2302D0833 (EN50054), 2302D0761 (EN61779) |
| WSP home page | Products page | Suppliers page | |
| Gas Detectors | Lumidor Index | Previous Lumidor Page | Next Lumidor Page |