For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.
| EC-P2 A single-gas portable gas detector that measures a wide variety of exotic gases • Single gas portable leak detector with internal sample pump • Includes carry case and sniffer probe • Wide range of swappable sensors with SmartCell technology • Data logging – can import to Excel spreadsheet • Alkaline primary and rechargeable secondary batteries for extended operation • Wide variety of exotic industrial toxics with exchangeable SmartCell technology • Applications include leak detection, ambient air measurement, petrochemical, emergency Hazmat response |
| Use | Portable, battery powered instrument that uses interchangeable cells to measure a range of gases that has datalogging capability |
| Primary Power | Alkaline D cell battery, approximately 75 hours continuous operation |
| Standby Power | Internal rechargeable NiCad battery, 6 hours operation |
| Charger | 120 VAC plug-in charger for internal standby battery (Optional 220 VAC charger available) |
| Display | Backlit LCD |
| Pump | Miniature internal diaphragm type, flow rate 0.5 SCFH |
| Alarms | Two Concentration alarms, Zero Drift caution, Low Flow and Low Battery alarms |
| Standard Accessories | Storage case, 10 in. (25 cm) extension wand, battery charger, filter material, datalogging software, RS-232 output cable (DB9 connector) |
| Optional Accessories | Analog output cable, Cell Keeper for storage of additional Smart-Cells |
| Sensor Type | Target gas selective electrochemical Smart-Cells |
| Accuracy | Sensor dependent, but generally ± 5% of reading |
| Repeatability | ± 1% full scale |
| Operating Ambient Temperature Range |
0° to 120° F (-18° C to 49° C) (can operate for short periods at sub-zero temperatures) |
| Storage Temperature | Recommend storing on the charger in an air-conditioned environment |
| Weight | 2.2 lbs. (1.0 kg) (detector with batteries) / 7 lbs. (3.2 kg) (shipping weight) |
| Dimensions | Approximately 3.5 in. x 5 in. x 8.5 in. (8.9 cm x 12.7 cm x 21.6 cm) |
| Outputs | RS-232 output of stored gas values. Analog output 0 to 1.0 VDC (requires optional analog output cable) |
| Memory | 12,000 data points, storage interval between points programmable at 1, 5, 10 or 15 minutes |
| Typical Memory Capacity | 8 days at 1 minute storage intervals |
| Single gases that can be monitored by the interchangeable Smart-Cells: |
|
| Gas | Standard Range |
| Alcohol | 0-500 ppm |
| Ammonia | 0-500 ppm |
| Ammonia | 0-2,000 ppm |
| Bromine | 0-5 ppm |
| Carbon Monoxide | 0-1,000 ppm |
| Chlorine | 0-5 ppm |
| Chlorine | 0-200 ppm |
| Chlorine Dioxide | 0-5 ppm |
| Ethylene Oxide (ETO) | 0-200 ppm |
| Fluorine | 0-5 ppm |
| Formaldehyde | 0-200 ppm |
| Hydrogen | 0-2,000 ppm |
| Hydrogen Chloride | 0-200 ppm |
| Hydride Gases | 0-2000 ppb |
| Hydrogen Peroxide | 0-100 ppm |
| Hydrogen Sulfide | 0-200 ppm |
| Nitric Oxide | 0-500 ppm |
| Nitrogen Dioxide | 0-200 ppm |
| Oxygen | 0-25 % |
| Ozone | 0-200 ppm |
| Phosphine | 0-2000 ppm |
| Sulfur Dioxide | 0-500 ppm |
| WSP home page | Products page | Suppliers page | |
| Gas Detectors | Lumidor Index | Previous Lumidor Page | Next Lumidor Page |