For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.
We accept VISA and Mastercharge.
![]() |
||||||||||||||||||||
|
ADJUSTABLE WATCH BAND The 200 Series WRISTAT adjustable watch band will not pull hair or pinch skin. Maintains superb electrical contact to wrist with easy adjustment to almost any wrist size. Long lasting and easy to clean band. All outside surfaces are fully insulated to protect wearer. Hypo-allergenic stainless steel used throughout band. May be used for clean room use. NOTE: WRISTAT® item numbers follow this standard nomenclature:
|
||||||||||||||||||||
![]() |
||||||||||||||||||||
|
ADJUSTABLE ELASTIC BAND Fully adjustable elastic band with silver coated nylon filaments for exceptional contact. This unique design combines long lasting, built in memory with unparalleled comfort and reliability. The nylon filaments on the underside of the WRISTAT are permanently coated with silver. Silver is much lower in resistance than conventional metals which makes the 300 Series WRISTAT more conductive than regular brands. The silver coated nylon eliminates the inherent hazard of stainless steel fibers breaking off from the bands. The buckle design allows the user to make unlimited adjustment with little effort and no effect on the bands elasticity.
|
||||||||||||||||||||
![]() |
||||||||||||||||||||
|
HOOK & LOOP BAND Non-irritating Hook & Loop Band adjusts to be worn on any size wrist snugly and comfortably. Electrical contact maintained with a metal plate under buckle.
|
||||||||||||||||||||
![]() |
||||||||||||||||||||
|
STAINLESS STEEL BAND Single stainless steel band makes contact with wearer's wrist. Exterior is coated with an insulating coating. Fully adjustable to any wrist size. May be used for clean room use.
|
||||||||||||||||||||
![]() |
||||||||||||||||||||
|
HOOK & LOOP ELASTIC BAND Non-irritating elasticized VELCRO® Hook & Loop Band adjusts to be worn on any size wrist snugly and comfortably. The elastic properties make this band the most comfortable wrist strap of its type. Electrical contact maintained with a metal plate under buckle.
|
||||||||||||||||||||
![]() |
||||||||||||||||||||
|
PALM-STAT Grounding Device for Spray Paint Operations |
||||||||||||||||||||
WRISTAT® GROUND CORDS Straight |
|
|
ITEM #2707 LIGHTWEIGHT: A single conductor tinned copper stranded (105 strands of 44 gauge wrapped) 24AWG wire with clear insulation. Available in 4' & 8' lengths with 1/4" nickled snap socket and a 1 meg ohm 1/4 watt carbon filled resistor molded on one end. A banana plug is molded on the other end which plugs into an alligator clip or optional end termination. |
ITEM #2803 HEAVYWEIGHT; A double conductor (1 tinned & 1 copper) stranded (each conductor 10 strands of 30 gauge wrapped) 20 gauge wire with clear insulation. Available in 4' & 8' lengths (or custom lengths). A molded, nickled 1/4" snap socket and a 1 meg ohm resistor is attached to one end with a soldered alligator clip on the other end. |
![]() |
![]() |
|
ITEM #2703 LIGHTWEIGHT: A single conductor (wrapped 105 strand 55 gauge) 24AWG with blue insulation. Wire O.D.= .095" with a coil O.D. of .375". Available in 6' or 12' extended length. A nickled 1/4" snap socket and a 1 meg ohm resistor is molded on one end with a banana plug (which plugs into alligator clip or optional BULLDOG CUP) on the other end. |
ITEM #2804 HEAVYWEIGHT: A single tinned copper conductor (wrapped 105 strand 40 gauge) 20AWG with black insulation. Wire O.D. = .145" with a coil O.D. of .475". Available in 6', 12' or 24' extended Length. A molded 1/4" nickled snap socket and a 1 meg ohm resistor is attached to one end with a soldered alligator clip on the other end. |
![]() |
![]() |
| A. Banana Jack Adapter B. #2705 Alligator Clip C. Snet Clamp D. #2704 Bull Dog Clip E. Mueller Clamp NOTE: Ground cords may be customized with 1/4" molded snaps and a 510K ohm, 270K ohm or 51K ohm resistor on one end and a variety of ground connections on the other end. The molded end is color coded and cords are marked with resistor value. |
|
![]() |
|
|
ADJUST-A-STAT® (for heeled shoes) A conductive cushioned neoprene rubber strap worn under the shoe arch for positive contact to the floor. An adjustable strap fits over the shoe. A conductive "tongue" fits under the heel of the foot for positive contact. Also available in new Comfort Flex HLE design, (hook & loop elastic) |
|
| #2650 | #2660HLE |
| #2651-1 Meg Resistor | #2661HLE-1 Meg Resistor |
| #2651-2 Meg Resistor | #2661HLE-2 Meg Resistor |
| #2651-51K Resistor | #2661HLE-51K Resistor |
| #2651-270K Resistor | #2661HLE-270K Resistor |
| #2651-510K Resistor | #2661HLE-510K Resistor |
![]() |
|
|
MODIFIED ADJUST-A-STAT® (for flat soled shoes) Similar to the regular ADJUST-A-STAT but designed to be worn with flat soled shoes. Made with non-marking two-layer reinforced conductive rubber. |
|
| #2655 | #2665HLE |
| #2656-1 Meg Resistor | #2665HLE-1 Meg Resistor |
| #2656-2 Meg Resistor | #2665HLE-2 Meg Resistor |
| #2656-51K Resistor | #2665HLE-51K Resistor |
| #2656-270K Resistor | #2665HLE-270K Resistor |
| #2656-510K Resistor | #2665HLE-510K Resistor |
![]() |
|
LEGSTAT® (for heeled shoes) Designed for use on shoes with heels, to be worn by mobile personnel on conductive or static dissipating floors. Fits over any size shoe. Manufactured with new very soft under-arch pad on a conductive neoprene rubber strap to maintain positive contact to the floor without restricting the mobility of personnel. |
|
ITEM: #2000 #2100-1 Meg Resistor |
![]() |
|
The Walter G. LEGGE Co., Inc. manufactures over 200 models of various personnel grounding devices both stock and custom design. These items control static electricity in static sensitive areas with various resistor values for specific applications and specifications. Resistor values of 51K, 270K, 510K, 1 meg and 2 megs are available. A 2 meg resistor will impart a 1 meg resistance to ground when worn on both feet as recommended. Custom design models and modifications to existing models may be designed and manufactured in a short time frame with no minimum. WRISTATS® are sold as a single unit and grounding devices to be worn on the feet are sold in pairs and must be worn in pairs. |
![]() |
|
LEGSTAT® HLE (for heeled shoes) New improved Comfort Flex HLE design, incorporates fully adjustable elastic hook and loop upper with soft under-arch pad on neoprene conductive rubber. |
![]() |
|
MODIFIED LEGSTAT® (for flat soled shoes) Non-marking 2 layer reinforced conductive rubber strap fits comfortably under soft or regular flat soled shoes of all sizes. An adjustable strap assures snug fit. Unit connects to the standard LEGSTAT garter assembly and includes all the quality features of our regular LEGSTAT unit. ITEM #'s: ITEM #'s: |
![]() |
|
SOLESTAT® (for heeled shoes) Because many women, as well as some men, prefer the convenience of an inner-sole to that of a garter, the Walter G. LEGGE Company, also manufacturers SOLESTATS. Universal in its wearability with any type or size shoe, SOLESTAT achieves effective skin contact by means of a conductive innersole. SOLESTAT® HLE (for heeled shoes) Same as SOLESTAT, but with new Comfort Flex HLE design, fully adjustable elastic hook and loop upper. |
![]() |
|
MODIFIED SOLESTAT® (for flat soled shoes) Same as SOLESTAT, but designed to be worn with flat sole shoes. Made with non-marking two-layer, reinforced conductive rubber. |
![]() |
||
|
MODIFIED SOLESTAT® HLE (for flat soled shoes) Same as MODIFIED SOLESTAT, but with new Comfort Flex HLE design, fully adjustable elastic hook and loop upper. Made with non-marking two-layer reinforced conductive rubber. |
||
![]() |
![]() |
![]() |
|
HEELSTAT (for both flat and heeled shoes) New, completely adjustable design, manufactured to the highest standards of quality and versatility. Can be worn on any size low heel or flat soled shoe. Two elastic adjustable hook and loop straps, ultra sonic welded and permanently fastened with metal eyelets to non-marking two-layer, (white/black) reinforced conductive rubber, provides easy adjustment and comfort. HEELSTAT can be worn with garter assembly, with or without resistor, or with conductive inserts inside of shoe. |
||
| ITEM: #1720 | With garter assembly, no resistor | |
| #1721-1 MEG | Same as 1720 with the addition of 1 meg resistor. Optional 2 MEG, 51K, 270K, or 510K available. | |
| #1722 | Same as 1720 but contact with the wearer is provided via a conductive SOLESTAT insert that fits into shoe for contact. SOLESTAT insert is made of conductive neoprene. | |
| #1723 | Same as 1722 with the addition of 1 meg resistor. 2 MEG, 51K, 270K, or 510K resistor available. | |
| #1726 | Same as 1720 but contact with the wearer is provided via a con-ductive strip insert that fits into shoe. ADJUST-A-STAT insert is made of conductive fabric. | |
| #1727 | Same as 1726 with the addition of 1 meg resistor. 2 MEG, 51K, 270K or 510K resistor available. | |
![]() |
|
|
BOOTSTAT® (for heeled boots or shoes) Conductive neoprene rubber foot strap designed to be worn under the arch of the shoe by mobile personnel on conductive or static dissipative floors. Similar to LEGSTAT #2000 but with an adjustable strap over the shoe to accommodate larger boot sizes. |
|
![]() |
|
|
TOESTAT (for both heeled or flat soled shoes) Designed for use on any shoe, but is excellent on a woman's high heeled shoe. Positive contact with the floor is made on the forward part of the shoe with a strip of non-marking two-layer reinforced conductive rubber. A VeLcro closure is used on top of the unit to ensure proper adjustments. A comfortable elastic band attaches to the ground conductor Velcro closure and wraps around the back of the heel to ensure comfort and fit. Available with any one of our standard body contacts (garter, insert or SOLESTAT insert) with or without resistor. |
|
| #1620 | With garter |
| #1621 -1 MEG | With garter and resistor |
| #1622 | With SOLESTAT insert (not pictured) |
| #1623 -1 MEG | With SOLESTAT insert and resistor (not pictured) |
| #1626 | With ADJUST-A-STAT insert |
| #1627-1MEG | With ADJ UST-A-STAT and resistor |
| *Also available with 2 MEG, 51K, 510K, 270K resistors | |
| WSP home page | Products page | Suppliers page | |
| Electrical Protection | Legge Index | Previous Legge Page | Next Legge Page |