For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.
We accept VISA and Mastercharge.
 |
||
|
All conductive and static dissipative coatings are manufactured by the Walter G. LEGGE Co., Inc. They are water based and are within VOC limits. ELIMSTAT® LX - Conductive Coating ITEM #K4093 ELIMSTAT LX is a water based conductive coating, manufactured with high quality acrylic latex. When applied to non-conductive surfaces, such as floors, bench tops, tote boxes, etc., ELIMSTAT LX provides conductivity to dissipate static charges. ELIMSTAT LX, along with appropriate LEGGE person-nel body grounding devices, will help you provide a static free environment. ELIMSTAT LX is extremely cost effective. Cost per square foot is only a small fraction of the cost of conductive vinyl flooring and epoxy. ELIMSTAT LX is easy to apply, maintain and repair. Provides excellent wearability and detergent resistance. All conductive and static dissipative coatings are available in 1 gallon and 5 gallon containers. ELIMSTAT® LXU - Conductive Coating ITEM #K4093 A water based acrylic, conductive coating reinforced with water-borne urethane. ELIMSTAT LXU is specifically designed for high performance use where hardness, chemical and abrasion resistance as well as exceptional adhesion properties are desired. Has excellent UV resistance and may be used as an exterior coating. Good resistance to most chemicals and solvents, with permanent conductivity: 25,000-1,000,000 ohms (NFPA Code #99). ELIMSTAT LXU is an excellent choice for difficult applications and offers a high-quality conductive coating for areas where additional adhesion and durability are required. May be rolled, brushed or sprayed. Two 1.5 mil dry film coats recommended for extended wear. Dry to touch in 45 minutes, recoat in 5-6 hours (24 hours if possible). |
||
|
 |
|||
|
These coatings are formulated with a new development in conductive and static dissipative coatings with permanent conductivity: ELIMSTAT® SDSC 549411 -Static Dissipative Coating |
|||
|
|
ELIMSTAT® UXM CCP ITEM #K4095 A high solids, water-borne urethane conductive coating with permanent conductivity ELIMSTAT UXM CCP, conductive coating, is designed for high performance uses where hardness, chemical and abrasion resistance as well as exceptional adhesion properties are desired. ELIMSTAT UXM CCP has excellent UV resistance and can be used as an exterior coating. Outstanding resistance to chemicals and solvents, with permanent conductivity. ELIMSTAT UXM CCP may be used for many difficult applications and offers a high quality conductive coating for areas where adhesion is a problem. May be rolled, brushed or sprayed. Excellent recoatability, clean surface thoroughly with LEGCLEAN, allow to dry thoroughly and reapply ELIMSTAT UXM CCP.ELIMSTAT® UXM-60P ITEM #K4091 A high solids, water-borne urethane static dissipative coating with permanent conductivity ELIMSTAT UXM-60P, static dissipative coating, is designed for high performance uses where hardness, chemical and abrasion resistance as well as exceptional adhesion properties are desired. ELIMSTAT UXM-60P has excellent UV resistance and can be used as an exterior coating. Outstanding resistance to chemicals and solvents, with permanent conductivity (107-109 Ohms per sq. in.). ELIMSTAT UXM-60P may be used for many difficult applications and offers a high quality conductive coating for areas where adhesion is a problem. May be rolled, brushed or sprayed. Excellent recoatability, clean surface thoroughly with LEGCLEAN, allow to dry thoroughly and reapply ELIMSTAT UXM-60P. ELIMSTAT® UXM-600 ITEM #K4092 A water-borne urethane conductive coating with permanent conductivity ELIMSTAT UXM-600, is specifically designed for high performance uses. Designed for use where hardness, chemical and abrasion resistance as well as exceptional adhesion properties are desired. ELIMSTAT UXM-600 has excellent UV resistance and can be used as an exterior coating. Outstanding resistance to chemicals and solvents, with permanent conductivity — adjustable to your specifications (105 ohms per sq. in. is the standard resistance). ELIMSTAT UXM-600 is an excellent choice for G-10 and many difficult applications and offers a high quality conductive coating for areas where adhesion is a problem. May be rolled, brushed or sprayed. May be baked at temperatures up to 300°F. |
|||
|
|||
|
Chemical Resistance Toluene, 1 hour immersion: No effect Rusting (ASTM D610): No effect Blistering (ASTMD714): No effect |
 |
 |
|
STAT- LES® (24% or 18%) ITEM #K4080 (24%) Static Dissipative Floor Finish Formulated with conductive polymers to both reduce tribo-electric charging and create a static dissipative surface. Use on floors to create a static dissipative surface (107 -109 ohms). May also be used to protect static dissipative tiles without affecting readings. Provides excellent gloss to any surface. Metal cross-link, acrylic copolymers provide excellent durability in any interior envi-ronment. STAT-LES is easy to apply with a mop and is easily removed with STAT-LES STRIPPER. Maintain your STAT-LES treated floor with the com-plete STAT-LES SYSTEM for ease of maintenance and longevity. |
URE-STAT™ ITEM #K4087 Static Dissipative Floor Finish — Reinforced With Water-Based Urethane Finally an alternative to regular dissipative floor finish. URE-STAT is formulated with a special water based urethane that dramatically increases the life and durability of the finish. URE-STAT was specifically developed for durabil-ity, ease of maintenance and effective ESD properties to ensure long lasting static protection. URE-STAT locks in ESD properties for the life of the finish. Water resistance is dramati-cally increased. Daily maintenance with the proper LEGGE cleaners will not adversely affect readings. |
|
STAT-LES® 24% or 18% Composition: Metal cross link acrylic copolymer |
URE-STAT™ Type: Metal cross link acrylic copolymer, urethane re-inforced |
|
MAINTENANCE PROCEDURES... DID YOU KNOW? Improper maintenance procedures can be catastrophic to your ESD program. Regular every-day cleaners not specifically manufactured for ESD surfaces can leave a film that will insulate the ESD surface and create a static charge. Most complaints of surfaces not reading in the proper conductivity range can be traced back to improper maintenance. The implementation of a proper ongoing maintenance program is critical to your ESD program. LEGGE offers training for maintenance personnel to help them achieve optimum results. • Daily Maintenance is accomplished with STAT-LES CLEANER, a concentrated, non-ionic, neutral pH detergent designed to clean and retain the natural ESD reading. APPLICATION TIPS: Use an automatic proportioning system to get exact dilution every time. A proportioner will save time, labor and money by automatically diluting the proper amount of concentrate. Consider using an auto-scrubber for maintenance. This machine will put the proper amount of cleaning solution on the floor, agitate and pickup the residual in one pass. |
 |
||
|
STAT-LES® STAT-LES® CLEANER ITEM #K4050 A major concern when implementing a sound ESD program is the cleanliness of the surface. Whether the surface is a work station, matting, floor finish or coating, dirt and soil build up daily and are detrimental to maintaining a static free work area. The reason is that dirt insulates your surface and has the potential to generate static charges. There are many all purpose non-conductive cleaners available to wash standard flooring and work surfaces. However, many such cleaners leave behind a film that will also insulate a static dissipative or conductive surface. Through extensive research and over 60 years of experience in the ESD field, LEGGE has developed the solution to cleaning these special surfaces. STAT-LES CLEANER has been specifically formulated to be used in static sensitive environments. Use on any surface not affected by water, including all types of conductive and static dissipative flooring, matting and tabletops. STAT-LES CLEANER is supplied as a concentrate for economical use. When used as directed, STAT-LES CLEANER will enhance the surface conductivity readings of static dissipative floor finishes and coatings (conductive and static dissipative). No rinsing is required — saving valuable man hours. STAT-LES® SPRAY BUFF REJUVENATOR ITEM #K4085 Maintain your STAT-LES treated floors with STAT-LES SPRAY BUFF REJUVENATOR — specifically formulated to keep your floors looking like the original application of STAT-LES FLOOR FINISH. May be applied by spray on or mop on method. If you are not using the complete STAT-LES SYSTEM you may be compromising your static control. Most cleaners adversely affect the resistance readings. LEGGE has developed a complete systems approach — from STRIPPER to CLEANER to SPRAY BUFF — for the most comprehensive care of your static dissipative floors.STAT- LES® STRIPPER ITEM # K9021 STAT-LES STRIPPER is formulated for the quick and efficient removal of STAT-LES FLOOR FINISH and other finishes based on regular and metal cross-linked polymers. Will not leave an insulating film on conductive flooring. Non-butyl, odorless and non-flammable formulation. |
||
|
STAT-LES® CLEANER Type: Static Dissipative Cleaner |
STAT-LES® SPRAY BUFF Neutral, biodegradable, anti-static Spray Buff |
STAT-LES® STRIPPER Description: Non-butyl stripper Specific Gravity: .988 |
 |
 |
|
STATSHINE™ ITEM #K4070 Non-slip Cleaner/Conditioner Concentrate for Conductive Flooring Non-insulating Anti-static Cleaner/Conditioner that cleans, shines and increases slip resistance without buildup or resistance change. STAT-SHINE is formulated for proper maintenance of conductive and static dissipative floors (i.e.: epoxy, vinyl tiles, etc.). Non film-forming, cleans and protects conductive floors, prevents buildup, improves slip resistance and maintains conductivity. Floors can be machine scrubbed, damp mopped or spray buffed as required with use dilution. When scrubbing or mopping, solution can be picked up with wet vacuum or mop. No rinsing required. If floors are heavily soiled, repeat procedure. |
ELIMSTAT® SDEC 5012 ITEM #K4082 Static Dissipative Sealer Clear, water based, acrylic coating designed to dissipate static charges on various surfaces such as walls, tote boxes, plastics and most other static generating objects. ELIMSTAT SDEC 5012 will dissipate a 5000 volt charge to 0V in Less than .01 seconds and is rated at 107-1010 ohms. ELIMSTAT SDEC 5012 is non-flammable and dries in 30-45 minutes depending on humidity and temperature. Two coats are recommend for extended wear. ELIMSTAT SDEC 5012 may be brushed, rolled, sprayed or applied by cloth, cleaned with STAT-LES CLEANER and removed completely with STAT-LES STRIPPER. |
|
STATSHINE™ Composition: Acrylic with natural soap cleaner, slip resistant additive |
ELIMSTAT® SDEC 5012 Composition: Metal cross link acrylic copolymer |
| NOTE: Ordinary general purpose cleaners and non-ESD floor finishes will affect conductivity of floors. STAT-SHINE is formulated as a one-step cleaner and conditioner that will not affect conductivity needed to dissipate static buildup. Especially useful on vinyl and composition conductive floors. Decreases tribo-electric charge generation on conductive vinyl floors. | |
 |
 |
|
LEGCLEAN® ITEM #K8070 Concentrated LEGCLEAN is truly an all purpose cleaner that can be used on any and all ESD and non-ESD surfaces — from footware testers, table and floor mats, walls, floors, etc. LEGCLEAN contains several non-ionic surfacants to quickly remove unwanted dirt. LEGCLEAN has exceptional rinsability. It contains a special rinsing agent which leaves an extremely clean surface and will not leave an insulating film on static control products. LEGCLEAN is formulated to clean our conductive footwear and wrist strap testers as well as personnel grounding devices. Easily removes stubborn dirt and stains and may be used on any hard surface. |
CONDUCTIVE CLEANER® ITEM #K4061 Ready To Use Cleaner Neutral pH CONDUCTIVE CLEANER enhances and maintains conductivity on static dissipative and conductive surfaces. Eliminates static charges on insulative surfaces by providing conductivity in the static dissipative range. Recommended for use on all conductive and static dissipative surfaces. Treated and cleaned with CONDUCTIVE CLEANER, non-conductive sur-faces will read static dissipative (109-1010 ohms). Excellent cleaning ability with no rinsing required. Also available in economical concentrate. |
|
LEGCLEAN® Composition: Anionic, nonionic, surfactant, emulsitiers, wetting agents and rinsing additives Active: 18% theoretical |
CONDUCTIVE CLEANER Description: Mild, neutral pH cleaner/degreaser Resistance Reading on Non-Conductive Surface: 109-1010 ohms per sq. in. |
|
Did you know... Ordinary all-purpose cleaners leave behind an insulating residue. Legge's ESD maintenance cleaners have been researched and developed to be non-insulating as well as superb cleaners. |
|
 |
 |
|
STATICO™ ITEM #K4060 Ready to Use Topical Antistat • Effective Cleaner • Dust Eliminator STATICO has been formulated to eliminate static charges and prevent buildup of triboelectric charges by providing surface conductivity on non-conductive surfaces for extended periods of time. By spraying, dipping, wiping or damp mopping almost any surface can be static free. Because STATICO contains no solvents or abrasives and is non-flammable it can be used on any surface not affected by water. Also available in economical concentrate, ITEM # K4065. Independent Laboratories have tested STATICO under the most stringent conditions. These tests were conducted at 72° F and 12% relative humidity. STATICO exceeds the standards set forth in MIL- B-81705B, ASTM-D-257-80, Electronic Industry 1S-5. |
STATICO™ #2 ITEM #K4068 Topical Antistat for Food Contact Areas STATICO #2 offers both static control and food contact certification. • Meets FDA Title 21, par. 178.3130 for N, N-Bis (2 hydroxyethyl) dodecanamide, an antistatic agent intended for contact with honey, chocolate, liquid sweeteners, condiments, flavor extracts, and liquid flavor concentrates, grated cheese, light and heavy cream, yogurt and any food type that is a dry solid with the surface containing no free fat or oil. • Safe and effective for housewares applications: polyethylene and/or polypropylene straws and polystyrene cup. • Does not affect polyethylene film quality or clarity at recommended use dilution. |
|
STATICO™ Type: High molecular weight topical antistat, water base |
STATICO™ #2 Type: Topical antistat for food contact surfaces |
|
Did you know... Objects and surfaces which are non-conducting (also referred to as insulators) are also static generators. Topical anti-stats are a simple and effective way of making almost any surface ESD safe. Use anywhere static needs to be controlled. The uses are limitless, but some include: carpets, chairs, workstations, TV and com-puter screens, clothing etc. |
|
 |
 |
|
STATICO™ AE ITEM #K4067 Topical Antistat for Carpets, Upholstry and Fabrics Formulated to eliminate static charges on carpets, upholstery and fabrics. Effectively prevents triboelectric charge buildup by increasing surface conductivity for an extended period of time. STATICO AE contains no solvents or abrasives and is non-flammable. Apply by spraying with a fine mist — do not soak. Heavy traffic areas may need treatment more often. |
ELIMSTAT® ATS ITEM #K4062 Concentrated Topical Antistat Water based ELIMSTAT ATS is formulated for use where static electricity needs to be controlled. ELIMSTAT ATS will make any surface it is applied to static dissipative and eliminate static charges in static sensitive environments. By eliminating static charges and controlling static generation, nuisance problems such as static cling as well as problems associated with manufacturing plastics and damage to electronic components are overcome. ELIMSTAT ATS is supplied as a concentrate for economical use. Dilute to 8 ounces per gallon of water for long-term effectiveness. ELIMSTAT ATS is non-flammable and fully biodegradable. |
|
STATICO™ AE Type: Water-based topical antistat |
ELIMSTAT® ATS Type: Water-based topical antistat |
|
Did you know... ELIMSTAT ATS is used extensively in the manufacture of plastics. Venetian and mini blind manufactures use ELIM-STAT ATS to control static and keep blinds dust free. ELIM-STAT ATS may be applied by spraying, wiping or dipping and is easily designed into the manufacturing process. |
|
| WSP home page | Products page | Suppliers page |
| Electrical Protection | Legge Index | Next Legge Page |