Lakeland Protective Clothing

Lakeland Protective Clothing Page 3

For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.

Credit Card Images

**Specifications for Pyrolon XT**
These durable coveralls feature a set-in sleeve design that makes movement effortless and makes rip outs a thing of the past. Pyrolon XT is a cost effective garment for applications where FR clothing is required, such as on-site contractors or visitors. Employee comfort is assured, as Pyrolon XT has very high MVTR's. These flame retardant coveralls from lakeland feature a set-in sleeve meeting ANSI / ISEA 101-1996 so you can move easily and not worry about rip-outs. 70% stronger than Pyrolon Plus 2, these garments are reinforced with a Cerex® nylon scrim and a repellent finish, exceeding NFPA 701. Lakeland's Pyrolon XT wear is air permeable with very high MVTR's. They can be worn comfortably over Nomex® or Indura® FR garments to help keep grease and grime off the more expensive coveralls.
Basis Weight	2.9 oz / yd²
Breaking Strength - Grab (MD / XD)	35.0 / 27.3 lbs. (ASTM D1682-64, Sect. 5.3)
Tearing Strength - Trapezoid (MD / XD)	9.6 / 14.8 lbs. (ASTM D1117-80)
NPFA 701 Char. in (MD / XD)	4.0 / 3.5
NFPA 701 weight loss % (MD / XD)	3.0 / 3.5

Pyrolon XT Protective Wear

Coverall 27412

Pyrolon® XT coverall with collar, zipper.
Sizes: S - 6X
Case Pack: 25
Case Wt.: 15 lbs.

Coverall 27417

Pyrolon® XT coverall with collar, zipper, elastic wrists and ankle.
Sizes: S - 6X
Case Pack: 25
Case Wt.: 16 lbs.

Coverall 27427

Pyrolon® XT coverall, zipper, attached hood.
Sizes: S - 6X
Case Pack: 25
Case Wt.: 16 lbs.

Coverall 27428

Pyrolon® XT coverall, zipper, attached hood, elastic wrists and ankles.
Sizes: S - 6X
Case Pack: 25
Case Wt.: 17 lbs.

**Specifications for Pyrolon CRFR**
Pyrolon CRFR is unique. They're disposable. They're chemical resistant. And they're flame retardant, meeting NFPA 701 specifications. Imagine, all these qualities in one protective garment. Pyrolon CRFR garments bar contaminating flammables like paint, oil and grease, hazardous liquids and dry particulates from penetrating to inner clothing. 2.0 mil. sealed seams Light chemical splash Flash fire protection Meets or exceeds NFPA 701, 1989 and 1996 Self extinguishing Won't melt or drip Wear them as primary protection or can be worn over protective coveralls such as Nomex to keep them clean and provide extended life to more expensive coveralls
Basis weight (oz / yd² & gsm)	2.92 / 99
Grab Tensile (lbs. / kg)	MD 34.2 / 15.5 XD 24.2 / 10.9 (ASTM D117-D1682)
Trap Tear (lbs. / kg)	MD 7.2 / 3.2 XD 7.9 / 3.5 (ASTM D117-D1682)
Mullen Burst (lbs. / sq. in.)	27.2
Ball Burst (lbs. / sq. in.)	37.4
Drum Abrasions (cycles)	900
Vertical Flammability	Pass (NFPA 701, 1989) Pass (NFPA 701, 1996)
Char length (inches / cm)	MD 4.1 / 10.4 XD 4.0 / 10.1
Afterflame (seconds)	< 2.0 (FTMS 191A)
Thermal Protective Performance (cal / cm²)	5.1
Charge Decay	Pass (NFPA 99)
Resistivity (ohms / cm)	3.55 X 10¹⁴

**Pyrolon CRFR**

50100	50110	50120	50150
Coverall, collar, open wrists and ankles Sizes: S - 6X Case Pack: 6 Case Wt.: 6 lbs.	Coverall, collar, elastic wrists and ankles Sizes: S - 6X Case Pack: 6 Case Wt.: 6 lbs.	Coverall, collar, hood, elastic face, open wrists and ankles Sizes: S - 6X Case Pack: 6 Case Wt.: 6 lbs.	Coverall, attached hood, elastic face, wrists and attached boots Sizes: S - 6X Case Pack: 6 Case Wt.: 8 lbs.

**Specifications for Tychem QC**
Tychem QC polyethylene coated garments from Lakeland provide excellent lightwight splash from many inorganic acids and other liquid chemicals. Tychem QC is a combination of Tyvek fabric and a 1.25 mils coating of polyethylene. It is a good economical choice for use in many industrial plants and chemical cleanup operations. Seams are available in either serged, bound or heat sealed styles for increased holdout of liquids and dry particulates. Tychem QC garments are available in high visibility yellow or gray.
Tychem QC Physical Properties
Basis Weight (oz. / yd²)		2.1 (ASTM D3776-85)
Thickness (mils)		26 (ASTM D1777-64)
Mullen Burst (psi)		66 (ASTM D3786-87)
Grab (MD / XD) (ASTM D53034-90)		25 / 35 lbs.
Trapezoidal (MD / XD) (ASTM D1117-80)		7 / 5 lbs.
Permeation Data for ASTM Recommended List of Chemicals for Evaluating Protective Clothing Materials (ASTM F1001)
Chemical Name	Physical Phase	Normalized Breakthrough Time (min.)	Average Permeation Rate (micrograms/cm²/min)
Acetone	L	immediate	10
Acetonitrile	L	immediate	16
Ammonia	G	immediate	3.1
1,3-Butadiene	G	immediate	12
Carbon disulfide	L	immediate	high
Chlorine gas	G	immediate	> 50
Dichloromethane	L	immediate	high
Dethylamine	L	immediate	64
N,N-Dimethylformamide	L	immediate	0.72
Ethyl acetate	L	immediate	12.7
Ethylene oxide	G	immediate	168
n-Hexane	L	immediate	high
Hydrogen chloride	G	immediate	9.3
Methanol	L	immediate	2.2
Methyl chloride	G	immediate	0.27
Nitrobenzene	L	immediate	18
Sodium hydroxide, 50%	L	> 480	ND
Sulfuric acid (conc)	L	> 480	ND
Tetrachloroethylene	L	immediate	410
Tetrahydrofuran	L	immediate	183
Toluene	L	immediate	high
ND = None Detected > = greater than L = Liquid G = Gas Numbers reported are averages of samples tested by the ASTM F739 test method. WARNINGS: 1. Tychem QC is not flame resistant and should not be used around heat, flame, sparks or in potentially flammable or explosive environments. 2. Garments made of Tychem QC should have slip resistant or anti slip materials on the outer surfaces of boots, shoe covers or other garment surfaces in conditions where slipping could occur.

Tychem QC

Coverall 05412 Tyvek™ QC coverall with collar and zipper. Serged Seams Sizes: S - 5XL Case Pack: 25 Case Wt.: 9 lbs. Serged and bound seams available as #55412	Coverall 05417 Tyvek™ QC coverall with collar and zipper, elastic wrists and ankles. Serged Seams Sizes: S - 5XL Case Pack: 25 Case Wt.: 11 lbs. Serged and bound seams available as #55317	Coverall 05414 Tyvek™ QC coverall zipper, attached hood, boots, elastic wrists. Serged Seams Sizes: S - 5XL Case Pack: 25 Case Wt.: 13 lbs. Serged and bound seams available as #55414	Coverall 05428 Tyvek™ QC coverall, zipper, attached hood, elastic wrists and ankles. Serged Seams Sizes: S - 5XL Case Pack: 25 Case Wt.: 11 lbs. Serged and bound seams available as #55428

Tychem QC

Shirt 05201 Tyvek™ QC shirt, snap closure, long sleeve. Sizes: S - 5XL Case Pack: 25 Case Wt.: 10 lbs.	Pants 05301 Tyvek™ QC pants, elastic waist. Sizes: S - 5XL Case Pack: 50 Case Wt.: 10 lbs.	Sleeves 860 Tyvek™ QC sleeves, elastic ends. Size: 18" Case Pack: 100 Case Wt.: 7 lbs.

Tychem QC

Coverall 55455 Tyvek™ QC coverall, zipper, hood with 20 mil PVC face shield, boots, elastic wrists, air line hookup. Sizes: S - 5XL Case Pack: 25 Case Wt.: 15 lbs.	Apron 527 Tyvek™ QC open back apron, long sleeves, elastic wrists, sewn ties. Size: 28" X 36". Case Pack: 50 Case Wt.: 10 lbs.	Apron 650 Tyvek™ QC apron, sewn ties. Size: 28" X 36". Case Pack: 100 Case Wt.: 9 lbs.

**Heat Sealed Tychem QC**

70100	70110	70150	70250
Tychem QC coverall, collar, open wrists and ankles Sizes: S - 5XL Case Pack: 6 Case Wt.: 6 lbs.	Tychem QC coverall, collar, elastic wrists and ankles Sizes: S - 5XL Case Pack: 6 Case Wt.: 6 lbs.	Tychem QC coverall, hood, elastic face, wrists, attached boots Sizes: S - 5XL Case Pack: 6 Case Wt.: 8 lbs.	Tychem QC jacket with collar, double storm flap with velcro, zipper, elastic wrists Sizes: S - 5XL Case Pack: 6 Case Wt.: 6 lbs.

**Heat Sealed Tychem QC**

70120	70140	70300
Tychem QC coverall, hood, elastic face, open wrists and ankles Sizes: S - 5XL Case Pack: 6 Case Wt.: 7 lbs.	Tychem QC coverall, hood, elastic face, open wrists, attached boots Sizes: S - 5XL Case Pack: 6 Case Wt.: 8 lbs.	Tychem QC pants, elastic waist, hemmed cuffs Sizes: S - 5XL Case Pack: 6 Case Wt.: 6 lbs.

**Heat Sealed Tychem QC**

70765	70710	Alternate color: Gray
Tychem QC sleeves, elastic ends Sizes: 18" length Case Pack: 12 Case Wt.: 6 lbs.	Tychem QC hood (pull over), bell shape, elastic face Sizes: one size Case Pack: 12 Case Wt.: 6 lbs.