JBC Safety Plastics Page 4

For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.
We accept VISA and Mastercharge.

Plywood Barricades
Features:
  • Available in both Type I and Type II
  • Legs are galvanized for maximum corrosion protection
  • Barricade board reflectors have been applied with high pressure rollers
  • Reflective sheeting used conforms to all local, state and federal regulations
  • All barricade boards are made from the most durable plywood material
  • Precise workmanship on all barricades
  • Extreme smoothness of barricade boards ensures durability of reflective sheeting
  • High impact resistance

Specifications:

  • Barricade legs galvanized
  • Leg length: 45 inches, standard
  • Leg thickness: 14 guage

Barricade Board Specifications:

  • Board widths: 6" and 8"
  • Board length: 24 inch standard
  • Board Material: Plywood
  • Board color: White (before application of reflective sheeting

Barricade Lights
Above:
Left: 6 Volt Model
Right: D-Cell Model		 Light Detail showing green "On" LED
JBC Barricade Lights are high quality, energy efficient lights. There are two models, one powered by two standard 6 volt batteries, and the other powered by D-Cells. These lights have a built in automatic light sensor to turn off lights in daytime, and activate them at night. This enables much longer battery life than competing units without a light sensor.

Features:

  • Energy saving circuitry designed to have extremely low electrical consumption and extended battery life (approximately 3 months under normal working conditions with automatic light sensor).
  • Battery orientation is unimportant. Lights will operate with batteries installed in any configuration. No particular polarity is necessary.
  • Durable and weatherproof barricade light casing is made from shock proof polyethylene with UV inhibitors.
  • Lens is made from impact resistant polycarbonate. Various lens colors available.
  • Built in automatic light sensor activates lights at night and turns them off in daytime.
  • High impact resistant handle on lights make transportation easy.
  • Security key enables selection of on/off or permanent flash mode.
  • Replacement parts available.
  • Green LED at lens base makes it easy to tell whether light has been turned on or not.
  • Flash rate can be set to either 60 flashes per minute or 120 flashes per minute.
  • Available with LED or filament light bulb.

D-Cell model only available with LED light source for extended battery life. D-Cells are easily accessible. D-Cell model is more compact than 6 volt battery model.

Channelizing Reflectors and Guard Rail Delineators
Channelizing reflectors are designed to be used on road sides and safety islands. Two way reflectors available in White, Yellow and Red colors.
These channelizers are designed for superior impact resistance. The lenses have superior retro-reflectivity for high visibility at night.

Reflector lens width: 100 mm
Reflector height is 210 mm

 Guard Rail Delineators are used on guard rails on curved roads, road sides, bridges, corners and beginning of safety islands. The lenses are highly retro-reflective and can be changed for different uses as seen above.

Lenses are available in White, Yellow and Red.
Boards are available in Black or Yellow.

Reflector lens widths: 80 mm and 100 mm
Lens boards are 420 mm X 420 mm

WSP home Products Suppliers
Traffic Control Previous JBC Page