JBC Safety Plastics Page 2

For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.
We accept VISA and Mastercharge.

Why PVC injection molded cones?
JBC's traffic cones are one piece 100% PVC injection molded. They are strong and flexible in heat or cold, resulting in a more durable cone that will stand up to the challenges of adverse weather or road conditions.

JBC's technological advancements allow the manufacture of competitively priced cones, superior in quality and materials. The result is a more cost effective, consistent product without variations in weight, size or color.

The brilliant fluorescent red orange color throughout is visible from any angle, day or night.

JBC's specially designed cleated base allows ease of stacking. The cones will not stick together; they'll firmly grip the road and won't easily be blown over. If the cone is hit, the base joint will stand up to abuse, reducing cracking and damage.

Traffic Cones

Traffic Cones

Traffic Cone Specifications
Model No. Weight
Lbs		 Height
Inches		 Wall
Thickness
Top		 Wall
Thickness
Bottom		 A B C
RC30008C 1.5 12" .100 .150 1.73 5.90 8.50
RC45015C 3.0 18" .100 .175 2.00 7.10 10.80
RC70025C 5.5 28" .100 .150 2.00 11.00 14.00
RC70030C 7.0 28" .100 .150 2.20 10.60 14.00
RC70030R 7.0 28" .100 .150 2.20 10.60 14.00
RC70030S 7.0 28" .100 .150 1.80 7.30 14.00
RC70045C 10.0 28" .150 .160 2.00 11.00 14.50
RC70045CT 10.0 28" .150 .160 2.00 11.00 14.50
RC70045S 10.0 28" .100 .150 1.80 7.30 14.00
RC90045C 10.0 36" .140 .185 2.20 10.25 14.00
RC90050C 12.0 36" .140 .185 2.20 10.25 14.00
Codes for Cones:
C=Regular Wide Body
S=Slim Line
R=Recessed Wide Body

Information About PVC Cones
Material
  1. 100% Recyclable PVC
  2. One piece construction, injection molded to eliminate base separation
  3. Brilliant fluorescent red-orange with UV inhibitors

Performance Characteristics

  1. Elongation: 620%
  2. Tensile Strength: 1845 psi
  3. Hardness: 75

Heat Resistance:
Cone was placed upright for 1 hour in 178 degress F circulating air oven with a 1.36 kg mass suspended inside the conical section from a 2.5 inch diameter disc placed on top of the cone. JBC cone exhibited no sign of slump or sag

Cold Resistance:
Cone was placed horizontally for 2 hours in a 0 degrees F freezer with the top of the cone supported so as to make the base plumb. After 2 hours, a 2 3/8" diameter steel ball with a mass of 0.91 kg was vertically dropped through a virtually frictionless guide tube onto the cone surface. JBC cone showed to fracturing, cracking, or splitting of cone or base.

RC7004CT cone is CALTRANS approved.

PVC Reboundable Channelizers
Made of 100% injection molded PVC for superior tensile strength and impact resistance. One piece design.
Available with either 3M or Reflexite high intensity reflective sheeting. Offers superior visibility and high retro-reflectivity at night. (reflective sheeting is 3" wide)
JBC PVC Channelizer can be installed with epoxy adhesive or bolted to ground.
Useful for highways, traffic islands, car parks, intersections, dangerous U-Turn areas, expressway interchanges, tollgates, airport runways, construction areas, dangerous roadsides, shopping malls and lane divisions.
Material: 100% PVC injection molded for superior life and non-fading fluorescent red-orange color.

Dimensions: 740 mm height / 29 inches
Base Diameter: 200 mm / 8 inches.

Retractable Cone Bars
JBC's retractable cone bars are designed to work with traffic cones or N-Top delineators. Adjusts and retracts from 3 to 6 feet in length. Comes complete with reflective yellow / black sheeting for maximum visibility day or night. Extremely portable and easy to install. Provides instant traffic barricade for hazardous locations such as manholes, or other controlled access areas.

WSP home Products Suppliers
Traffic Control Previous JBC Page Next JBC Page