Filter Result By

Browse

Manufacturers

Supervac 724WT, Water Turbine PPV

Supervac 724WT, Water Turbine PPV

Manufacturer: Supervac

Product Code: 724WT

Supervac 724WT, Water Turbine PPV


a 24”, water turbine PPV set on the classic 7-Series frame. The 724WT is for departments looking for high output PPV fan that is not dependent on electricity and can be used in hazardous locations.

 

Features

  • 7 Point Cast Aluminum Airfoil Blade ‹› holds up better than plastic in high heat
  • Precision Spun Steel Shroud ‹› durability with maximum airflow
  • Full Roll Cage Aluminum Frame ‹› protects key components
  • Flat Proof Tires ‹› heavy duty rubber, never fl at, rolls up stairs and curbs
  • 4 Position Tilt Plate ‹› tilt shroud to 4 angles (20°, 10°, 0 °, -10°)
  • Step Brake System ‹› foot pedal locks fan in place
  • Air Cone Guard ‹› classic design, StreamShaper Guard optional
  • Fold Down Handle ‹› folds down within frame for easy, compact storage
  • Compatible With Super Vac Accessories: Spiral Duct; Mountain Mister; Foam Generator; LED Holder
  • 5 Year Warranty

 

Specs

  • Motor ‹› 12 Hp Water Turbine
  • Power Requirement ‹› 100-250 psi
  • HxWxD ‹› 27.75” x 29” x 21” ‹› 705mm x 737mm x 533mm
  • Blade Diameter ‹› 24” ‹› 610mm
  • Weight ‹› 88 lbs ‹› 40 kg
  • Output ‹› 22,470 cfm ‹› 38,175 cmh

 

POSITIVE PRESSURE VENTILATOR

A Super Vac, part number #724WT, 24” water powered positive pressure ventilator shall be supplied. The unit shall be cart style designed with rear mounted pneumatic wheels, a full height frame, and a tilt-up, full width handle for easy positioning and rapid deployment. All components of the positive pressure ventilator shall 100% manufactured and assembled in the United States.

The pneumatic wheels shall be designed with a “one step” braking system utilizing a single foot operated brake pedal to assure positive engagement to prevent the unit from rolling during operation. The unit shall remain stationary while running at full speed.

The entire frame of the unit shall be constructed of square tubular steel that shall surround the shroud and the seven-blade 24” airfoil propeller in a roll cage design that shall enhance lifting and user safety. The blade shall be constructed of precision cast of aluminum alloy #713. The blade shall be driven by the water powered motor that shall have a direct drive connection. The blade shall be precision balanced and attached to the engine shaft with a split taper-lock bushing. Any ventilators utilizing belts, pulley, gears, or additional shafts shall not be acceptable.

The positive pressure ventilator shall be powered by a 12 horsepower water motor using approximately 100 GPM while operating at 150 PSI. The unit shall have a 1.5” NST inlet and outlet.

The shroud and the safety grill shall be designed as to provide maximum air velocity. The positive pressure ventilator shall have a tilt control with four positions including one position that can direct airflow downward. The standard angle of air direction shall be 18 degrees above horizontal ground level and shall be equipped with a lever to set positions of the air flow to 20, 10, 0, and -10 degrees above and below horizontal level.

The front and rear safety guards shall be designed to OSHA and U.L. Standards to prevent accidental contact with the blade. The unit shall be tested to AMCA 240-95 for air movement and the air movement shall exceed 22,470 cubic feet per minute.

The positive pressure ventilator shall have a minimum five (5) year warranty. The engine shall be warranted by the engine manufacturer for a minimum of two (2) years.

Related Categories


Request a Quote Now

Request a Quote X

Your Name*
Please let us know your name.

Company Name
Invalid Input

Your Email*
Please let us know your email address.

Phone*
Invalid Input

Category*
Please enter valid Product/Category

Product Url
Enter valid Product Url

Comment
Please let us know your message.

Captcha*
Captcha   RefreshPlease enter the right CAPTCHA

Processing...