Haws Equipment Page 8-A

For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.

Credit Card Images

Haws HWBFA8.VRC Wall Mounted Electric Water Coolers
Model HWBFA8.VRC, vandal resistant, barrier free wall mounted self contained 7.7 gallon per hour electric water cooler is perfect for commercial and institutional applications. This model features a 14 gauge satin finish stainless stee cabinet with integral basin. The ventilation louvers are covered on the inside by framed stainless steel wire mesh screen which is welded to the inside of the cabinet. Removable front panel is held with stainless steel pinned socket screws. Bubbler is low profile PCP cast brass that is locked to the receptor. Valve is operated by recessed push button. Supply 3/8", waste 1-1/4" O.D. The refrigeration system is balanced to provide low energy usage and a longer life assured by utilizing a high displacement compressor, a counterflow cooling evaporator/chiller, efficient capillary sizing, a large capacity dryer-strainer and a fan cooled condenser with maximum heat exchange. A wire service cord and polarized plug are furnished. 115 V, 60 Hz. Environmentally friendly R134a refrigerant is controlled by calibrated capillary tube. Capacity is based on ARI standard rating conditions of 80ºF inlet water temperature, 90ºF room temperature, 50ºF drinking water temperature. Haws manufatures drinking fountains, electric water coolers and electric drinking fountains to be lead free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65 and the Federal Safe Drinking Water Act.

Components:

Bubbler Head: Model 5703M, polished chrome plated forged brass, integral basin shank, shielded, anti-squirt vandal resistant bubbler head.
In-Line Strainer: Model 6420, bowl type strainer with positive rubber seals molded onto a fine 60 micron mesh screen.
Valve: Model 5872, push button activated, front adjustable, automatic diaphragm pressure regulation with fully adjustable flow.
Fan Motor: Model 0003253408, unit bearing self lubricated fan motor for maintenance free longer life.
Evaporator Chiller: Model HPC026148-SP, evaporator/chiller design combines counterflow cooling with efficient bonding of refrigerant and water coils for maximum heat transfer. The all copper construction meets government and commercial sanitation requirements. Employs totally encapsulated construction of high efficiency EPS for maximum insulating characteristics.
Push Button: Model PBA4, push button assembly has a polished chrome plated finish.
Compressor: Model HPAA00005, hermetically sealed positive start 1/5 HP air compressor with lifetime lubrication and built-in overload protection. System completely sealed after deep evacuation, dehydration and pressure testing at 250 psig. 120 V, 60 Hz.
Thermostat: Model HP0005951371, positive sensing thermostat for controlling temperature of evaporator/chiller storage water. It is factory set at 50ºF. Adjustable +/- 5ºF.

Options & Accessories (Additional Cost)

Bi-Level Wall Mounted Water Cooler: Model HWBFA8L.VRC, "Hi-Lo", 7.7 gallon per hour wall mounted electric water cooler with brushed sterling vinyl cabinet.
Barrier Free Electric Water Cooler: Model HWBFA8, brushed sterling vinyl cabinet, 7.7 gallon per hour wall mounted electric water cooler.
Barrier Free Electric Water Cooler: Model HWBFA8SS, barrier free, wall mounted self contained electric water cooler with no. 4 satin finish stainless steel cabinet.
Filter: Model 6426, 12" x 2", in-line lead removal element that reduces lead in incoming water to levels below 15 ppb for up to 500 gallons.

Haws HWBFA8L.VRC Wall Mounted Electric Water Coolers
Model HWBFA8L.VRC, vandal resistant barrier free wall mounted self contained 7.7 gallon per hour electric water cooler is pefect for commercial and institutional applications. This "Hi-Lo" fountain provides accessibility on the low side for those in wheelchairs and the high side is provided for those who have trouble bending or stooping. The refrigeration system is balanced for low energy usage and a longer life assured by a high displacement compressor, a counterflow cooling evaporator/chiller, efficient capillary sizing, a large capacity dryer-strainer and a fan cooled condenser with maximum heat exchange. A wire service cord and polarized plug is furnished. 115 V, 60 Hz. Environmentally friendly R134a refrigerant is controlled by calibrated capillary tube. Model HWBFA8L.VRC has 14 gauge satin finished stainless steel cabinets. The bubbler heads are locked by stainless steel pins in the base. The recessed activation buttons are made of chrome plated brass and are front adjustable. The access plate is made of one piece, 14 gauge steel with finger safe ventilation louvers and hidden vandal proof fasteners. Capacity is based on ARI standard rating conditions of 80ºF inlet water temperature, 90ºF room temperature, 50ºF drinking water temperature. Haws manufatures drinking fountains, electric water coolers and electric drinking fountains to be lead free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65 and the Federal Safe Drinking Water Act.

Components:

Bubbler Head: Model 5703M, polished chrome plated forged brass, integral basin shank, shielded, anti-squirt vandal resistant bubbler head.
In-Line Strainer: Model 6420, bowl type strainer with positive rubber seals molded onto a fine 60 micron mesh screen.
Valve: Model 5872, push button activation, front adjustable, automatic diaphragm pressure regulation with fully adjustable flow.
Fan Motor: Model 0003253408, unit bearing self lubricating fan motor for maintenance free longer life.
Evaporator Chiller: Model HPC026148-SP, evaporator/chiller design combines counterflow cooling with efficient bonding of the refrigerant and water coils for maximum heat transfer. The all copper construction meets government and commercial sanitation requirements. Employs totally encapsulated construction of high efficiency EPS for maximum insulating characteristics.
Push Button: Model PBA4, push button assembly has a polished chrome plated finish.
Compressor: Model HPAA00005, hermetically sealed, positive start 1/5 HP air compressor with lifetime lubrication and built-in overload protection. System completely sealed after deep evacuation, dehydration and pressure testing at 250 psig. 120 V, 60 Hz.
Thermostat: Model HP0005951371, positive sensing thermostat for controlling temperature of evaporator/chiller storage water. It is factory set at 50ºF. Adjustable +/- 5ºF.

Options & Accessories (Additional Cost)

Wall Mounted Water Cooler: Model HWBFA8.VRC, vandal resistant 14 gauge stainless steel 7.7 gallon per hour wall mounted electric water cooler.
Barrier Free Electric Water Cooler: Model HWBFA8SS, barrier free, wall mounted self contained electric water cooler with no. 4 satin finish stainless steel cabinet.
Barrier Free Electric Water Cooler: Model HWBFA8, brushed sterling vinyl cabinet, 7.7 gallon per hour wall mounted electric water cooler.
Barrier Free Electric Water Cooler: Model HWBFA8L, "Hi-Lo" 7.7 gallon per hour wall mounted electric water cooler with brushed sterling vinyl cabinet.
Barrier Free Electric Water Cooler: Model HWVFA8LSS, "Hi-Lo", 8 gallon per hour wall mounted electric water cooler with no. 4 satin finish stainless steel cabinet.
Filter: Model 6426, 12" x 2", in-line lead removal element that reduces lead in incoming water supply to levels below 15 ppb for up to 500 gallons.

Haws HWCT8 Barrier Free Wall Mounted Electric Water Coolers
Model HWCT8 barrier free full recessed stainless steel electric water cooler features a large basin with matching panel and grille manufactured of 18 gauge type 304, no. 4 satin finish. It is designed to be installed above a wheelchair access area. The refrigeration system is balanced for low energy usage and a longer life assured by utilizing a high displacement compressor, a counterflow cooling evaporator/chiller, efficient capillary sizing, a large capacity dryer-strainer and a fan cooled condenser with maximum heat exchange. 115 V, 60 Hz. Environmentally friendly R134a refrigerant is controlled by calibrated capillary tube. Model HWCT8 features front mounted push button valve, vandal resistant bubbler head and provides 8 gallons per our of chilled water. The slots on the grille are designed to eliminate any sharp edges and they are small enough to prevent intrusion from fingers or objects. The grille is also backed with a foam filter that protects the fan motor and compressor from dust and debris. Capacity is based on ARI standard rating conditions of 80ºF inlet water temperature, 90ºF room temperature, 50ºF drinking water temperature. Model HWCT8 is designed to meet the Americans with Disabilities Act. Haws manufatures drinking fountains, electric water coolers and electric drinking fountains to be lead free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65 and the Federal Safe Drinking Water Act.

Components:

Bubbler Head: Model 5705, sculpted, polished chrome plated brass, shielded, anti-squirt integral basin shank, vandal resistant bubbler head features laminar flow to prevent splashing.
In-Line Strainer: Model 6420, bowl type strainer with positive rubber seals molded onto a fine 60 micron mesh screen.
Valve: Model 5872, push button activation, front adjustable, automatic diaphragm pressure regulation with fully adjustable flow.
Waste Strainer: Model 6454.1, polished chrome plated solid flat brass waste strainer less locking lugs with washer, locknut and slipjoint tailpiece.
Push Button: Model PBA2, push button assembly has a polished chrome plated finish.
Mounting: Model MTGFR.HWCT, galvanized steel mounting frame.
Chiller: Model HCR8, chiller provides for instantaneous cooling to meet a continuous demand for chilled water.

Options & Accessories (Additional Cost)

Barrier Free Electric Drinking Fountain: Model HWCT8GF, barrier free, full recessed, stainless steel electric water cooler, 18 gauge type 304 with no. 4 satin finish. Designed to be installed above a wheelchair access area. Includes glassfiller.
Barrier Free Electric Drinking Fountain: Model HWCT8HO, electric sensor activated barrier free, 18 gauge type 304, no. 4 satin finish stainless steel electric water cooler. Designed to be installed above a wheelchair access area.
Recessed Drinking Fountain: Model 2405, barrier free, fully recessed stainless steel drinking fountain with no. 4 satin finish.
Full Recessed Electric Drinking Fountain: Model MFRS8, full recessed, 8 gallon per hour electric water cooler with stainless steel cabinet.
Filter: Model 6426, 12" x 2", in-line lead removal element that reduces lead in incoming water supply to levels below 15 ppb for up to 500 gallons.

Haws HWCT8HO Barrier Free Wall Mounted Electric Water Coolers
Model HWCT8HO barrier free, full recessed stainless steel electric water cooler features a large basin with matching panel and grille manufactured of 18 gauge type 304 with no. 4 satin finish. It is designed to be installed above a wheelchair access area. It features HO "hands off" electric sensor activation. Just standing in front of the fountain activates water flow. The refrigeration system is balanced for low energy usage and a longer life assured by utilizing a high displacement compressor, a counterflow cooling evaporator/chiller, efficient capillary sizing, a large capacity dryer-strainer and a fan cooled condenser with maximum heat exchange. 115 V, 60 Hz. Environmentally friendly R134a refrigerant is controlled by calibrated capillary tube. Model HWTC8HO features vandal resistant bubbler head and provides 8 gallons per hour of chilled water. The slots on the grille are designed to eliminate any sharp edges and they are small enough to prevent intrusion by fingers or objects. The grille is also backed by a foam filter that protects the fan motor and compressor from dust and debris. Capacity is based on ARI standard rating conditions of 80ºF inlet water temperature, 90ºF room temperature, 50ºF drinking water temperature. Model HWCT8HO is designed to meet the Americans with Disabilities Act. Haws manufatures drinking fountains, electric water coolers and electric drinking fountains to be lead free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65 and the Federal Safe Drinking Water Act.

Components:

Bubbler Head: Model 5705, sculpted polished chrome plated brass, shielded, anti-squirt, integral basin shank, vandal resistant bubbler head featues laminar flow to prevent splashing.
In-Line Strainer: Model 6420, bowl type strainer with positive rubber seals molded onto a fine 60 micron mesh screen.
Waste Strainer: Model 6454.1, polished chrome plated solid flat brass waste strainer less locking lugs with washer, locknut and slipjoint tailpiece.
Pressure Regulator: Model 5867, automatic flow compensation device maintains a constant stream height under line pressures that vary from 30 to 90 psi.
Mounting: Model MTGFR.HWCT, galvanized steel mounting frame.
Chiller: Model HCR8, chiller provides for instantaneous cooling to meed a continuous demand for chilled water.

Options & Accessories (Additional Cost)

Barrier Free Electric Drinking Fountain: Model HWCT8, barrier free, full recessed stainless steel electric water cooler, 18 gauge type 304 with no. 4 satin finish. Designed to be installed above a wheelchair access area.
Recessed Drinking Fountain: Model 2405, barrier free, fully recessed stainless steel drinking fountain with no. 4 satin finish.
Full Recessed Electric Drinking Fountain: Model HFRS8, fully recessed, 8 gallon per hour electric water cooler with stainless steel cabinet.
Filter: Modle 6426, 12" x 2", in-line lead removal element that reduces lead in incoming water supply to levels below 15 ppb for up to 500 gallons.

WSP home page Products page Suppliers page Emergency Showers & Eyewash
Haws Index Previous Haws Page Next Haws Page