For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.
 |
| Model H7149MS wall mounting shelf is designed to support most remote chillers in order for the chiller to be off the floor and tucked out of the way. Made of heavy gauge galvanized steel. Shelf size is 25-1/8" x 13". Note: when installing chiller on shelf in a remote location, adequate air circulation and access must be provided for chiller. |
 |
 |
| Model MTGFR.LG mounting frame is manufactured of heavy gauge galvanized steel with pre-drilled mounting holes. This mounting system is used with dual height electric water cooler modles and can be shipped prior to complete cooler in order to be installed during rough-in. Back plate is pre drilled and supplied with panel nut retainer inserts to accept all fountain mounting configurations. Wall opening size required: 31-1/8" wide, 37-5/8" high and 11" deep. |
 |
 |
| Model MTGFR.SM mounting frame is manufactured of heavy gauge galvanized steel with pre-drilled mounting holes. This mounting system is used with single height electric water cooler models and can be shipped prior to complete cooler in order to be installed during rough-in. Back plate is pre drilled and supplied with panel nut retainer inserts to accept all fountain mounting configurations. Wall opening size required: 14-1/8" wide, 32-1/8" high and 11" deep. |
 |
 |
| Model H3130 is a convenient, self closing cold water glassfiller faucet that provides dependable service in restaurants, cafeterias and many other locations. This faucet is designed for installation on counter/deck mounted receptors. Push lever operated, polished chrome plated brass, deck mounted gooseneck glassfiller faucet. 3/8" NPT (F) inlet. Dimensions: bottom of flange to spout outlet, 8-1/8"; flange diameter, 1-1/4"; c-supply to c-spout, 1-11/16". Glassfiller must be installed on water coolers at factory. |
 |
 |
| Model H3139 is a convenient, self closing cold water glassfiller faucet that provides dependable service in restaurants, cafeterias and many other locations. This faucet is designed for installation on counter/deck mounted receptors. Push down platform operated, polished chrome plated brass, deck mounted gooseneck glassfiller faucet. 3/8" NPT (F) inlet. Dimensions: bottom of platform to spout outlet, 6"; bottom of flange to platform,1-3/4"; flange diameter, 1-1/4"; c-supply to c-spout, 1-11/16". Glassfiller must be installed on coolers at factory. |
 |
 |
| Model 6426 lead removal inlet filter is recommended where lead in the water is a concern. It is an in-line 12" x 2" lead removal filter which reduces lead in incoming water supply to levels below 15 ppb for up to 500 gallons. Contains no carbon. Filters particulate lead to 10 microns and absorbs soluble lead. Performance demonstrated under NSF Standard 53 by independent, certified testing laboratory. Does not leach lead once absorbed. 1/4" NPT (F) inlet and outlet. 3/8" tubing connectors. |
 |
| WSP home page | Products page | Suppliers page |
| Haws Index | Previous Haws Page | Emergency Showers & Eyewash |