Haws Equipment Page 12-A

For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.

Credit Card Images

Haws HR10 Remote Chillers
Model HR10 remote chiller provides 10 gallons per hour of precooled water. This remote can provide chilled water to a wide variety of fountains with modern styling. Chiller can be concealed under a counter, between or within walls (check local codes), or high on a wall or column. Ideally suited for factories, cafeterias, restaurants, schools and offices. Other uses could be for precooling for beverage dispensers and fountains, machine coolant cooling, photo and X-ray processing, laboratory experimental work, or a capacity booster for ice cube makers. Model HR10 includes a heavy gauge galvanized steel cabinet. The refrigeration system is balanced to provide low energy usage and a longer life assured by utilizing a high displacement compressor, a counterflow evaporator/chiller, efficient capillary sizing, a large capacity dryer-strainer and a fan cooled condenser with maximum heat exchange. A wire service cord and polarized plug are furnished. 115 V, 60 Hz. Environmentally friendly R134a refrigerant is controlled by a calibrated capillary tube. Air cooled remote chillers require air circulation for proper operation. Any chiller mounted under a counter must also be provided with adequate ventilation. When chiller is installed in wall, be certain that it can always be removed through opening without damaging either chiller or wall. Allow minimum 1" clearance and minimum 4" clearance on back side. Capacity is based on ARI standard rating condition of 50ºF drinking water, 80ºF inlet water and 90ºF room temperature. Multiple outlets: HR10 is capable of supplying a maximum of 2 stations (bubbler, glassfiller). Supply line to station should be adequately insulated and no farther than 7 feet from chiller.

Components:

Evaporator Chiller: Model HPC026265-SP, evaporator/chiller with combination coil and tank type provides for a double wall construction. Refrigerant and water coil are coiled around and bonded to a stainless steel storage tank to provide efficient heat transfer. Storage tank and coil are tested to 125 psi working pressure.
Compressor: Model HPAA00008-SP, hermetically sealed compressor with an automatic reset overload protector and starting capacitor. Lifetime lubricated. System completely sealed after deep evacuation, dehydration and pressure testing at 250 psig. 120 V, 60 Hz.
Thermostat: Model HP0005951371, positive sensing thermostat for controlling temperature of evaporator/chiller storage water. It is factory set at 50ºF. Adjustable +/- 5ºF.

Options & Accessories (Additional Cost)

Remote Chiller: Model HCR10, 10 GPH remote chiller.
Mounting: Model H7149MS, mounting shelf for remote chillers.
Chiller: Model HCR8, 8 GPH remote chiller.

Haws HRC30 Remote Chillers
Model HRC30 remote chiller provides 28 gallons per hour of cold water. This remote can provide chilled water to a wide variety of fountains with modern styling. Chiller can be concealed under a counter, between or within walls (check local codes), or high on a wall or column. Ideally suited for factories, cafeterias, restaurants, schools and offices. Other uses could be for precooling for beverage dispensers and fountains, machine coolant cooling, photo and X-ray processing, laboratory experimental work, or a capacity booster for ice cube makers. Model HRC30 includes a heavy gauge galvanized steel cabinet. The refrigeration system is balanced to provide low energy usage and a longer life assured by utilizing a high displacement compressor, a counterflow evaporator/chiller, efficient capillary sizing, a large capacity dryer-strainer and a fan cooled condenser with maximum heat exchange. A wire service cord and polarized plug are furnished. 115 V, 60 Hz. Environmentally friendly R134a refrigerant is controlled by a calibrated capillary tube. Air cooled remote chillers require air circulation for proper operation. Any chiller mounted under a counter must also be provided with adequate ventilation. When chiller is installed in wall, be certain that it can always be removed through opening without damaging either chiller or wall. Allow minimum 1" clearance and minimum 4" clearance on back side. Capacity is based on ARI standard rating condition of 50ºF drinking water, 80ºF inlet water and 90ºF room temperature. Multiple outlets: HRC30 is capable of supplying a maximum of 3 stations (bubbler, glassfiller). Supply line to station should be adequately insulated and no farther than 7 feet from chiller.

Components:

Fan Motor: Model HP3579C is a fan motor for model HRC30
Compressor: Model HP48000036, hermetically sealed, positive start 1 HP compressor with lifetime lubrication and built-in overload protection. System completely sealed after deep evacuation, dehydration and pressure testing at 250 psig. 120 V, 60 Hz.

Options & Accessories (Additional Cost)

Remote Chiller: Model HRC30.50, 220 volt, 28 GPH high capacity remote chiller.
Remote Chiller: Model HRC32W, 31.9 GPH water cooled high capacity remote chiller.
Remote Chiller: Model HRC32W.50, 31.9 GPH, 220 volt water cooled high capcity remote chiller.

WSP home page Products page Suppliers page Emergency Showers & Eyewash
Haws Index Previous Haws Page Next Haws Page