For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.
 |
| Model HU1CC point of use water cooler supplies cold and room temperature water, and features contemporary styling with individually replaceable tops, sides and front panels. This bottle-less cooler provides an endless amount of chilled water and is perfect for home or office. No drain required. Inside the durable UV protected polypropylene cabinet, the water is protected by a stainless steel reservoir and waterways that have been proven over the years. This series of water coolers are designed to accommodate various types of filters. Model HU1CC provides .6 GPH of 50ºF water when room temperture is 90ºF. Cabinet Shell: filled white polypropylene front and side panels. Top & Drip Receptor: high impact UV-protected polystyrene, color matched to cabinet. Receptor is easily removed for cleaning. Frame: rigid non-corroding plastic base pan and mid pan attached by four strong, galvanized tubular struts. The frame is designed to allow for easy maintenance and refurbishment. Faucets: durable polypropylene. Self closing, no drip. Cold Water Reservoir: type 304 stainless steel. External copper refrigerant coil. Reservoir insulation is removable two piece polystyrene jacket. Float System: dual mechanical float system controls water level reservoir. Secondary safety float/valve mechanism activates in case of primary valve failure. Safety system has manual reset feature. Cold Water Thermostat: temperature is controlled by adjustable thermostat easily accessible on rear of cabinet. Refrigeration Unit: convection cooled condenser. Internally spring mounted, hermetically sealed compressor with automatic overload protector. No lubrication needed. Environmentally friendly R134a refrigerant is controlled by calibrated capillary tube. Capacity: cooler provides .6 GPH of 50ºF water when room temperature is 90ºF and inlet water temperature is 80ºF. Supply: source water must be potable and between 20 psi minimum and 90 psi maximum. Connection to Cooler: 1/4" O.D. tube. Electrical: 115 V, 60 Hz. Compressor HP: 1/20 at full load. 5.5 amps, 3 wire service cord and polarized plug are furnished. Haws manufactures drinking fountains, electric water coolers and electric drinking fountains to be lead free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65 and the Federal Safe Drinking Water Act. Options & Accessories (Additional Cost) Point of Use: Model HU1CC.50, point of use water cooler, 220 volt with cold and room temperature faucets. |
 |
 |
| Model HU1HC point of use water cooler supplies cold and room temperature water, and features contemporary styling with individually replaceable tops, sides and front panels. This bottle-less cooler provides an endless amount of chilled water and is perfect for home or office. No drain required. Inside the durable UV protected polypropylene cabinet, the water is protected by a stainless steel reservoir and waterways that have been proven over the years. This series of water coolers are designed to accommodate various types of filters. Model HU1HC provides .6 GPH of 50ºF water when room temperture is 90ºF. Cabinet Shell: filled white polypropylene front and side panels. Top & Drip Receptor: high impact UV-protected polystyrene, color matched to cabinet. Receptor is easily removed for cleaning. Frame: rigid non-corroding plastic base pan and mid pan attached by four strong, galvanized tubular struts. The frame is designed to allow for easy maintenance and refurbishment. Faucets: durable polypropylene. Self closing, no drip. Hot child resistant Tomlinson Valve standard. Cold Water Reservoir: type 304 stainless steel. External copper refrigerant coil. Reservoir insulation is removable two piece polystyrene jacket. Float System: dual mechanical float system controls water level reservoir. Secondary safety float/valve mechanism activates in case of primary valve failure. Safety system has manual reset feature. Cold Water Thermostat: temperature is controlled by adjustable thermostat easily accessible on rear of cabinet. Refrigeration Unit: convection cooled condenser. Internally spring mounted, hermetically sealed compressor with automatic overload protector. No lubrication needed. Environmentally friendly R134a refrigerant is controlled by calibrated capillary tube. Capacity: cooler provides .6 GPH of 50ºF water when room temperature is 90ºF and inlet water temperature is 80ºF. Hot Tank: type 304 stainless steel. 500 watt externally mounted band type heating element can be easily removed without draining the water from the cooler. Storage capacity is 16 ounces. Hot Water Thermostat: automatic thermostat factory set at approximately 180ºF - 190ºF. Hot tank is protected by a heat limiter in the event of thermostat failure. a hot tank on/of switch located on the shelf is easily accessible. An adjustable thermostat is also available. Supply: source water must be potable and between 20 psi minimum and 90 psi maximum. Connection to Cooler: 1/4" O.D. tube. Electrical: 115 V, 60 Hz. Compressor HP: 1/20 at full load. 5.5 amps, 3 wire service cord and polarized plug are furnished. Haws manufactures drinking fountains, electric water coolers and electric drinking fountains to be lead free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65 and the Federal Safe Drinking Water Act.
Options & Accessories (Additional Cost) Point of Use: Model HU1CC.50, point of use water cooler, 220 volt with cold and room temperature faucets. |
 |
| WSP home page | Products page | Suppliers page | Emergency Showers & Eyewash |
| Haws Index | Previous Haws Page | Next Haws Page |