Haws Emergency Equipment 2008 - Emergency Showers & Eyewashes 2

Haws Emergency Equipment 2008 - Emergency Showers & Eyewashes 2

For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.

Credit Card Images

**Laboratory Units**

7301DM Specifications Receptor: 11" stainless steel with #4 satin finish. Heads: Twin Feather-Flo* patented ABS plastic eye/face wash heads in Safety Green with integral flip top dust covers that protect heads and automatically release with water pressure (Model SP21). Activation: Pushing down on knob operates a stay open chrome plated brass ball valve that is equipped with a stainless steel stem. Sign: Universal emergency sign included. Stream Control: Steady water flow under varying pressures assured with dual automatic pressure compensation devices. Mounting: Special mounting device secures bowl to counter top. Details Supply: 1/2" IPS Waste: 1-1/4" NPS Shipping Weight: 11 lbs. Options (Additional Cost) Model 9022: 3 sided ABS plastic sign featuring universal pictorial of an emergency eyewash. *Patent No. 3,602,436

7610 Single action swing down 7611 Single action swing away All polished chrome plated laboratory eye/face wash units designed for counter or sink mounting. Model 7610 is single action swing down unit for sink back or counter top mounting. Ideal for installations where side counter space is limited. Model 7611 is single action low profile swing away for mounting either right or left side of sink mounting. Specifications Heads: Twin Feather-Flo* patented ABS plastic eye/face wash heads in Safety Green with integral flip top dust covers that protect heads and automatically release with water pressure (Model SP21). Activation: Model 7610 is activated by a single pull down motion. Model 7611 is activated by swinging forward. Single motion activates a unique polish chrome plated stay open ball type valve. Directional Sign: High impact styrene. Sign: Universal emergency sign included. Stream Control: Steady water flow under varying pressures assured with dual automatic pressure compensation devices. Details Supply: 1/2" O.D. slipjoint Shipping Weights: 7 lbs. *Patent No. 3,602,436

7612 Polished chrome plated for right side mounting 7612LH Polished chrome plated for left side mounting 7613 Chrome plated for right side mounting All models are swing away design for mounting on counter top near or over sink. Unit leaves eyewash clear of sink when not in operation and swings into position during use. Model 7612 and 7612LH are all polished chrome plated and are ideal for laboratory installation. Model 7613 is rough chrome plated and recommended for industrial applications. Specifications Heads: Models 7612 and 7612LH have twin SoftFlo* patented polished chrome plated brass antisurge eyewash heads (SP10). Model 7613 has twin Soft-Flo* patented ABS plastic anti-surge eyewash heads in Safety Green (Model SP11). Dust covers protect heads and automatically release with water pressure. Activation: Models 7612 and 7612LH feature a stainless steel push flag which operates a stay open polished chrome plated brass ball valve that is equipped with a stainless steel ball and stem. Model 7613 has chrome plated valve. Sign: Universal emergency sign included. Stream Control: Steady water flow under varying pressures assured with dual automatic pressure compensation devices. Details Supply: 1/2" O.D. slipjoint Shipping Weights: 7 Ibs. *Patent No, 3,809,315

7655WC. Recessed wall mounted - pull down 7650 Counter mounted - pull down 7651 Wall mounted - pull down Polished chrome plated pull down laboratory eye/face wash with ABS heads. Model 7655WC furnished with fully recessed stainless steel cabinet and extra long arms for Barrier Free access. Specifications Heads: Twin Feather-Flo* patented ABS plastic eye/face wash heads in Safety Green with integral flip top dust covers that protect heads and automatically release with water pressure (Model SP21). Activation: Pull down arms operate a polished chrome plated stay open ball valve. Sign: Universal emergency sign included. Stream Control: Steady water flow under varying pressures assured with dual automatic pressure compensation devices. Cabinet: Model 7655WC has a fully recessed corrosion resistant, 16 gauge, type 304, no. 4 finish stainless steel cabinet that includes stop and union connection. Details Supply: 7650, 7651 - 1/2” O.D. slipjoint. 7655WC - 1/2” IPS for bottom or back connection, Shipping Weight: 7650 - 7 lbs., 7651 - 7 lbs. 7655WC - 27 lbs. *Patent No. 3,602,436

7656WC Recessed wall mounted - pull down Polished chrome plated pull down laboratory eyewash with polished chrome plated heads. Furnished with fully recessed stainless steel cabinet and drainage pan designed for Barrier Free access. Specifications Heads: Polished chrome plated brass Soft-Flo* anti-surge eyewash heads (Model SP10). Activation: Pull down drainage pan operates a polished chrome plated brass ball type valve. Supply stop and integral trap are supplied, Sign: Universal emergency sign included. Stream Control: Steady water flow under varying pressures assured with automatic pressure compensation device. Cabinet: Fully recessed corrosion resistant, 16 gauge stainless steel mounting can with ABS tray and pull handle. Details Supply: 1/2” IPS for back or side connection. Waste: 1-1/2” IPS for back or side connection. Patent No, 3,602,436 Options* (Additional Cost) Model 9022 3 sided ABS plastic sign featuring universal pictorial of eyewash. *Patent No. 3,602,436

8163 Good for retro fit applications where wall penetration is not practical 8170 Good for retro fit applications where wall penetration is not practical Specifications Head: Model 8163 is satin finished cast aluminum featuring a flange for flush to ceiling mounting. Spreader is stainless steel 10" stainless steel head. Model 8110 is satin finished cast aluminum featuring a flange for flush to ceiling mounting Spreader is stainless steel Activation: Model 8163 is rigid stainless steel pull rod operates a stay open chrome plated brass ball valve that is equipped with a stainless steel stem. This extended rod is located parallel to the wall. Piping: Model 8163 has a 6-1/2" long nipple and 1" elbow with escutcheon included. Model 81l0 has a 4" long nipple and 1" elbow included. Sign: Universal emergency sign included. Details Supply: 1" IPS Options (Additional Cost) Model 9021: 3 sided ABS plastic sign featuring universal pictorial of shower. Pull rod: Other lengths available on special order.

8164 Flush to ceiling for concealed mounting with recessed pull down lever valve 8165 Exposed stainless steel shower head with recessed pull down lever valve Specifications Head: Model 8164 is satin finished cast aluminum featuring a flange for flush to ceiling mounting. Spreader is stainless steel. Model 8165 is a 10" stainless steel head. Activation: Heavy duty stainless steel activating arm with PVC handle, operates a stay open chrome plated brass ball valve that is equipped with a stainless steel stem. Piping: Model 8164 has a 4" long nipple and 1" elbow included .. Model 8165 has a 6-1/2" long nipple and 1" elbow with escutcheon included. Sign: Universal emergency sign included. Details Supply: 1" IPS Options (Additional Cost) Model 9021: 3 sided ABS plastic sign featuring universal pictorial of shower.

8123HPCP Polished stainless head with polished chrome plated valve and piping 8169 Flush to ceiling for concealed mounting Specifications Head: Model 8123HPCP has a high polished corrosion resistant 10" staintess steel head (Model 8127HP). Model 8169 is satin finished cast aluminum featuring a flange for flush to ceiling mounting. Spreader is stainless steel. Activation: Rigid stainless steel pull rod operates a stay open chrome plated brass ball valve that is equipped with a stainless steel stem. Supplied pull rod is designed to operate shower when installed in ceiling up to 8'. For other length pull rods, see options below. Piping: Model 8123HPCP has polished chrome plated red brass Sign: Universal emergency sign included. Details Supply: 1" IPS Shipping Weight: 8123HPCP - 13 lbs, 8169 - 11 lbs. Options (Additional Cost) Model 9020: 3 sided ABS plastic sign featuring universal pictorial of shower and eyewash. 8169 Stainless steel pull rod for other than 8' ceiling installation: Model SP204: 56" overall for 9' ceilings. Model SP203: 68" overall for 10' ceilings Pull rod: Other lengths available on special order.

8355WC Recessed wall mounted - pull down. Pull down laboratory drench shower and eyewash in one recessed stainless steel housing. Furnished with fully recessed stainless steel cabinet and drainage pan designed for Barrier Free access. Specifications Shower Head: Satin finished cast aluminum featuring a flange for flush to ceiling mounting. Spreader is stainless steel. Activation: Heavy duty stainless steel activating arm with PVC handle, operates a stay open chrome plated brass ball valve that is equipped with a stainless steel stem. Piping: 4" long nipple and 1" elbow included. Sign: Universal emergency sign included. Eyewash Head: Polished chrome plated brass Soft-Flo* anti-surge eyewash heads (Model SP10). Activation: Pull down drainage pan operates a polished chrome plated brass ball type valve. Supply stop and trap are supplied. Sign: Universal emergency sign included. Stream Control: Steady water flow under varying pressures assured with automatic pressure compensation device. Cabinet and Access Panel: Fully recessed corrosion resistant, 16 gauge #4 satin finish stainless steel, with Safety Green ABS tray and pull handle. Details Supply: 1" IPS, side inlet Waste: 1-1/2” IPS, side outlet Options (Additional Cost) Model 9020: 3 sided ABS plastic sign featuring universal pictorial of shower and eyewash. *Patent No. 3,602,436

8605SS For areas where material corrosion resistance or cleanliness is a concern, and where excess water on floor may damage surroundings. Specifications Booth: 16 gauge 304 stainless steel panels, with #4 finish, enclosed on three sides. Vertical header and overhead pipe are stainless steel. Four stainless steel anchoring brackets provided. Grate: Floor grate is powder coated steel with corrosion resistant substrate. Shower Head: 10" stainless steel head (Model 8127). Activation: Rigid stainless steel pull rod operates a stay open type 316 stainless steel ball valve. Sign: Large graphics identify the booth as an emergency shower/eyewash station and assist in guiding user to the front. Eye/Face Wash Head: Twin Feather-Flo* patented ABS plastic eye/face wash heads in Safety Green with integral flip top dust covers that protect heads and automatically release with water pressure (Model SP21) Activation: Stainless steel push flag operates a stay open type 316 stainless steel ball valve. Stream Control: Steady water flow under varying pressures assured with dual automatic pressure compensation devices. Details Supply: 1" IPS Waste: 3" inside caulk Options (Additional Cost) Model 9040: Shower curtain for privacy and water containment. Model 9001: Alarm system activated by shower or eyewash to summon help. *Patent No. 3,602,436

8901 B Wall mounted 8903 Deck mounted 8904 Deck mounted with dual 45° angled dual heads Specifications Heads: Feather-Flo* patented ABS plastic eye/face wash head in Safety Green with integral flip top dust cover that protects head and automatically release with water pressure (Model SP21). Model 8904 is equipped with dual heads angled at 45° to thoroughly flush both eyes at once. Activation: Squeeze handle operates stay open chrome plated brass valve. Sign: Universal emergency sign included. Color: Safety Green, per ANSI Z535.1-1991 designating safety and location of first aid and safety equipment. Flow Control: Steady water flow under varying pressures. Hose: 25/32" 0.0. 8' 250 PSI pressure rated. Chrome plated swivel fitting at one end to facilitate ease of operation. Mounting: Model 8901B supplied with high impact ABS plastic wall bracket. Mounting screws not furnished. Model 8903 and 8904 are supplied with an impact and corrosion resistant Noryl™ plastic deck flange that incorporates guiding key slots for proper positioning of spray heads. Flange is secured to deck with locknut. Details Supply: 1/2” IPS Shipping Weight: 8901 B - 5 Ibs., 8903 - 6 Ibs, 8904 - 7 Ibs. Options (Additional Cost) Model SP212: Vacuum Breaker Flexible Stainless Steel Hose: Metal jacketed hose for abrasion resistance and extra long protection from UV rays. *Patent No. 3,602,436 Note: Per ANSI, "Hand-held drench hoses provide support for emergency shower and eyewash units but shall not replace them."

08905 Wall mounted with dual 45° angled heads and recoil hose 08908 Wall mounted with single 45° angled head and recoil hose Easy to locate and operate wall mounted emergency, face and body spray models with recoil hose allow user the ability to wash all parts of the face and body. Specifications Heads: Model 8905 has dual 45° angled FeatherFlo* patented ABS plastic eye/face wash heads in Safety Green with integral flip top dust covers that protect heads and automatically release with water pressure (Model SP21). Model 8908 has a single 45° angled head (Model SP21) Activation: Squeeze handle operates stay open chrome plated brass valve. Recoil Hose: 12' yellow recoil hose supplied with elbow and wall escutcheon, returns to a compact coil after use for convenient storage and to resist tangling. Flow Control: Steady water flow under varying pressures. Sign: Universal emergency sign included. Mounting: Model 8905 features "U" shaped chrome plated steel bracket with two grabber clips Model 8908 features high strength ABS plastic bracket with single grabber clip. Screws not furnished. Details Supply: 1/2" IPS Shipping Weight: 8905 - 6 Ibs, 8908 - 7 Ibs. Options Model SP212: Vacuum breaker *Patent No.3, 602, 436 Note: Per ANSI, "Hand-held drench hoses provide support for emergency shower and eyewash units but shall not replace them."

WSP home page	Products page	Suppliers page
Emergency Showers & Eyewashes	Haws Index	Previous Haws Emergency Page	Next Haws Emergency Equippment Page