Model HWO8 Product Details

The Haws model HWO8 electric water cooler is a wall mounted drinking fountain that delivers 8 gph of 50°F water. This model is activated by a lever handle bubbler that features a built-in pressure regulator and a flexible stream guard. The satin finish stainless steel basin and Granite powder-coated galvanized steel exterior panels provide a long lasting and esthetically pleasing unit for any setting.

Beautiful satin stainless basin resists stains and corrosion.
High-efficiency cooling tank and coil is mounted in a heavy-gauge steel frame.
Cooling capacity of 8 gph, 115V - 60Hz system with full load amps of 4.6, and rated watts at 370.

Haws electric water coolers are certified to ANSI/NSF Standard 61, Section 9, comply with ARI Standard 1010 and ANSI A117.1, and be listed by Underwriter Laboratories to U.S. and Canadian standards. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006).

Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

Model HCFO5 Product Details

The Haws model HCFO5 electric water cooler is a floor mounted drinking fountain that delivers 5 gph of 50°F water. This model is activated by a lever handle bubbler that features a built-in pressure regulator and a flexible stream guard. The satin finish stainless steel basin and Granite powder-coated galvanized steel exterior panels provide a long lasting and esthetically pleasing unit for any setting.

Beautiful satin stainless basin resists stains and corrosion.
Compact design for areas where space may be a concern.
Cooling capacity of 5 gph, 115V - 60Hz system with full load amps of 3.3, and rated watts at 280.
High-efficiency cooling tank and coil is mounted in a heavy-gauge steel frame with a separate galvanized steel base.

Haws electric water coolers are certified to ANSI/NSF Standard 61, Section 9, comply with ARI Standard 1010 and ANSI A117.1, and be listed by Underwriter Laboratories to U.S. and Canadian standards. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006).

Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

Model HFO8 Product Details

The Haws model HFO8 electric water cooler is a floor mounted drinking fountain that delivers 8 gph of 50°F water. This model is activated by a lever handle bubbler that features a built-in pressure regulator and a flexible stream guard. The satin finish stainless steel basin and Granite powder-coated galvanized steel exterior panels provide a long lasting and esthetically pleasing unit for any setting.

Beautiful satin stainless basin resists stains and corrosion.
High-efficiency cooling tank and coil is mounted in a heavy-gauge steel frame with a separate galvanized steel base.
Cooling capacity of 8 gph, 115V - 60Hz system with full load amps of 4.6, and rated watts at 370.

Haws electric water coolers are certified to ANSI/NSF Standard 61, Section 9, comply with ARI Standard 1010 and ANSI A117.1, and be listed by Underwriter Laboratories to U.S. and Canadian standards. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006).

Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

Model HCR8 Product Details

The Haws model HCR8 remote chiller provides 8 gallons per hour of 50°F cold water to a wide variety of fountains. This model is rated at 115V, 60Hz, single phase, 5 amp service. It is constructed of heavy gauge galvanized steel and its compact style can be concealed under a counter, between or within walls (check local codes) or high on a wall or column. Other uses could include pre-cooling of beverage dispensers, machine coolant cooling, and many other applications.

Cooling capacity of 8 gph, 115V - 60Hz system with full load amps of 5, with a minimum 4" clearance on back side.
Haws electric water coolers are certified to ANSI/NSF Standard 61, Section 9, comply with ARI Standard 1010 and ANSI A117.1, and be listed by Underwriter Laboratories to U.S. and Canadian standards.

Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

Model HCR8.50 Product Details

Model HCR8.50 is a 220 Volt, 50 Hz remote chiller provides 8.0 gallons (30.20 liters) per hour of cold water. This remote can provide chilled water to a water to a wide variety of fountains with modern styling. Chiller can be concealed under a counter, between or within walls (check local codes), or high on a wall or column. Ideally suited for factories, cafeterias, restaurants, schools, and offices. Other uses could be for precooling for beverage dispensers and fountains, machine coolant cooling, photo and X-ray processing, laboratory experimental work, or a capacity booster for ice cube makers. Model HCR8.50, 8-gph remote chiller, includes a heavy gauge galvanized steel cabinet.

The refrigeration system is balanced to provide low energy usage and a longer life assured by utilizing a high displacement compressor, a counterflow cooling evaporator/chiller, efficient capillary sizing, a large capacity dryer-strainer, and a fan-cooled condenser with maximum heat exchange. Environmentally friendly R134a refrigerant is controlled by calibrated capillary tube. Air cooled remote chillers require air circulation for proper operation. Any chiller mounted under a counter must also be provided with adequate ventilation.

When chiller is installed in wall be certain that it can always be removed through opening without damaging either chiller or wall. Allow minimum 1" clearance. Minimum 4" clearance on back side. Unit is furnished with leads enclosed inside terminal enclosure 220 Volt, 50 Hz, single phase. Capacity is based on ARI standard of rating conditions of 50°F (10°C) drinking water, 80°F (26°C) inlet water, and 90°F (32°C) room temperature.

Multiple-Outlets: HCR8.50 is capable of supplying a maximum of 2 stations (bubbler, glassfiller). Supply line to station should be adequately insulated and no farther than 7 feet from chiller.

Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

Model H7149MS Product Details

Model H7149MS wall mounting shelf is designed to support most remote chillers in order for chiller to be off the floor and tucked out of the way. Made of heavy gauge galvanized steel. Shelf size is 25 - 1/8" x 13".

Note: When installing chiller on shelf in a remote location, adequate air circulation and access must be provided for chiller.

Model MTGFR.HWCT Product Details

Model MTGFR.HWCT mounting frame is manufactured of heavy gauge galvanized steel with pre-drilled mounting holes. For use with Haws electric drinking fountain Model HWCT8, this mounting frame may be shipped prior to fountain for rough-in installation.