Model 4010 Product Details

Deck mounted units like the 4010 are installed in accessible countertop locations for quick locating and convenient operation. Push button operated bubbler valve with adjustable stream regulation make this fountain easily activated and maintained. Slope down stream guide minimizes splashing, keeping the surrounding area clean. Equipped with mounting bracket and waste strainer, this fountain is vandal resistant and easily placed.

Stainless steel construction offers a good amount of durability and corrosion resistance.
Anti-squirt flow prevents surging water, keeping the drinking area contained and clean.

Haws manufactures drinking fountains, electric water coolers and electric drinking fountains to be lead-free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006).

Model 4110ADA Product Details

Deck mounted sink units like the 4110ADA are installed in accessible countertop locations for quick locating and convenient operation. Sunken down sink design with water tight fit and stainless steel mounting rim helps to minimize excess splashing, keeping the drinking area contained.

White acid-resistant enameled iron sink makes for one of the toughest mounting surfaces Haws produces.
Measurements are 24" x 16" x 5"
Mounted at the correct height and equipped with proper drinking fountain and faucet, this unit complies with the Americans with Disabilities Act requirements for drinking fountains.

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, electric water coolers and electric drinking fountains to be lead-free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act. IAPMO listed to ASME A112.19.1-2008/CSA B45.2-2008.

Specify one of the following gooseneck faucets to be installed left rear side:

Model 5510LF stay-open lever handle, polished chrome-plated brass gooseneck faucet,

Model 5452LF, self-closing lever handle polished chrome-plated brass gooseneck faucet, or

Model 5530LF stay-open, hot and cold lever handle, polished chrome-plated brass gooseneck faucet.

Specify the following bubbler to be installed on right front side;

Model 5054LF lever handle polished chrome-plated brass drinking faucet,

Model 5054EG EnviroGard™ lever handle polished chrome-plated brass drinking faucet,

Model 5017LF push button polished chrome-plated brass drinking faucet with renewable cartridge and vandal resistant lock pin, or

Model 5051LF self-closing lever handle drinking faucet with a polished chrome-plated brass finish, adjustable stream flow, and vandal resistant lock pin.

Model 4130ADA Product Details

Deck mounted sink units like the 4130ADA are installed in accessible countertop locations for quick locating and convenient operation. Sunken down sink design with water tight fit and stainless steel mounting rim helps to minimize excess splashing, keeping the drinking area contained.

White acid-resistant enameled iron sink makes for one of the toughest mounting surfaces Haws produces.
Measurements are 30" x 18" x 6 1/2"
Mounted at the correct height and equipped with proper drinking fountain and faucet, this unit complies with the Americans with Disabilities Act requirements for drinking fountains.

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, electric water coolers and electric drinking fountains to be lead-free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act. IAPMO listed to ASME A112.19.1-2008/CSA B45.2-2008.

Specify one of the following gooseneck faucets to be installed left rear side:

Model 5510LF stay-open lever handle, polished chrome-plated brass gooseneck faucet,

Model 5452LF self-closing lever handle polished chrome-plated brass gooseneck faucet, or

Model 5530LF stay-open, hot and cold lever handle, polished chrome-plated brass gooseneck faucet.

Specify the following bubbler to be installed on right front side:

Model 5054LF lever handle polished chrome-plated brass drinking faucet,

Model 5054EG EnviroGard™ lever handle polished chrome-plated brass drinking faucet,

Model 5017LF push button polished chrome-plated brass drinking faucet with renewable cartridge and vandal resistant lock pin, or

Model 5051LF self-closing lever handle drinking faucet with a polished chrome-plated brass finish, adjustable stream flow, and vandal resistant lock pin.

Model 4210 Product Details

Deck mounted sink units like the 4210 are installed in accessible countertop locations for quick locating and convenient operation. Sunken down sink design helps to minimize excess splashing and self-rimming feature allows for easy mounting.

Stainless steel construction offers a good amount of durability and corrosion resistance.
Beautiful satin finish resists stains and corrosion.
Sitting water-tight along with sound deadening underneath keep this unit mounted securely on any countertop.
Measurements are 25" x 17" x 5"
Mounted at the correct height and equipped with proper drinking fountain and faucet, this unit complies with the Americans with Disabilities Act requirements for drinking fountains.

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, electric water coolers and electric drinking fountains to be lead-free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act.

Specify one of the following gooseneck faucets to be installed left rear side:

Model 5510LF stay-open lever handle, polished chrome-plated brass gooseneck faucet,

Model 5452LF self-closing lever handle polished chrome-plated brass gooseneck faucet or,

Model 5530LF stay-open, hot and cold lever handle, polished chrome-plated brass gooseneck faucet.

Specify the following bubbler to be installed on right front side:

Model 5054LF lever handle polished chrome-plated brass drinking faucet,

Model 5054EG EnviroGard lever handle polished chrome-plated brass drinking faucet,

Model 5017LF push button polished chrome-plated brass drinking faucet with renewable cartridge and vandal resistant lock pin, or

Model 5051LF self-closing lever handle drinking faucet with a polished chrome-plated brass finish, adjustable stream flow, and vandal resistant lock pin.

Model 4230 Product Details

Deck mounted sink units like the 4230 are installed in accessible countertop locations for quick locating and convenient operation. Sunken down sink design helps to minimize excess splashing and self-rimming feature allows for easy mounting.

Stainless steel construction offers a good amount of durability and corrosion resistance.
Beautiful satin finish resists stains and corrosion.
Sitting water-tight along with sound deadening underneath keep this unit mounted securely on any countertop.
Measurements are 31" x 19" x 5"
Mounted at the correct height and equipped with proper drinking fountain and faucet, this unit complies with the Americans with Disabilities Act requirements for drinking fountains.

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, electric water coolers and electric drinking fountains to be lead-free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act.

Specify one of the following gooseneck faucets to be installed left rear side:

Model 5510LF stay-open lever handle, polished chrome-plated brass gooseneck faucet.

Model 5452LF self-closing lever handle polished chrome-plated brass gooseneck faucet or,

Model 5530LF stay-open, hot and cold lever handle, polished chrome-plated brass gooseneck faucet.

Specify the following bubbler to be installed on right front side:

Model 5054LF lever handle polished chrome-plated brass drinking faucet.

Model 5054EG EnviroGard™ lever handle polished chrome-plated brass drinking faucet.

Model 5017LF push button polished chrome-plated brass drinking faucet with renewable cartridge and vandal resistant lock pin, or

Model 5051LF self-closing lever handle drinking faucet with a polished chrome-plated brass finish, adjustable stream flow, and vandal resistant lock pin.

Model 0001632151 Product Details

High flow replacement cartridge used with the 5725 fountain head.

Model 5010 Product Details

Model 5010 push button bubbler valve is designed with an adjustable stream regulation and a shielded bubbler to provide an anti-squirt drinking stream. Constructed from lead-free polished chrome-plated brass, this bubbler valve is resistant to corrosive materials and is easily kept clean.

Dimensions: Bottom of base to top of bubbler is 3-3/8", base diameter is 1-1/4", and connection is a 3/8" inlet.
Haws manufactures drinking fountains, electric water coolers and electric drinking fountains to be lead-free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act. This product meets ADA requirements, and is compliant to California Health and Safety Code 116875 (AB 1953-2006).

Model 5010SS Product Details

Model 5010SS push button bubbler valve is designed with an adjustable stream regulation and a shielded bubbler to provide an anti-squirt drinking stream. Constructed from stainless steel with a polished finish, this bubbler valve is resistant to corrosive materials and is easily kept clean.

Dimensions: Bottom of base to top of bubbler is 3-3/8", base diameter is 1-1/4", and connection is a 3/8" inlet.
Haws manufactures drinking fountains, electric water coolers and electric drinking fountains to be lead-free by all known definitions including ANSI/NSF Standard 61, Section 9, and the Federal Safe Drinking Water Act. This product meets ADA requirements, and is compliant to California Health and Safety Code 116875 (AB 1953-2006).

Model 5017LF Product Details

Model 5017LF drinking faucet is designed with a shielded bubbler and self-closing push button with adjustable stream regulation to provide an anti-squirt drinking stream. Unit is to be mounted from sink or counter top and is constructed from a lead-free polished chrome-plated brass, making this bubbler valve resistant to corrosive materials and easy to keep clean.

Drinking faucet includes: basin shank, locking pin, and mounting hardware.
Dimensions: 2" high forged brass bubbler head with a 1/2" inlet.
Haws manufactures drinking fountains, electric water coolers and electric drinking fountains to be lead-free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act. This product meets ADA requirements, and is compliant to California Health and Safety Code 116875 (AB 1953-2006).

Model 5051LF Product Details

Model 5051LF push button drinking faucet is designed with a shielded bubbler to provide an anti-squirt drinking stream. Unit is to be mounted from sink or counter top and is constructed from a lead-free polished chrome-plated brass, making this bubbler valve resistant to corrosive materials and easy too keep clean. Unit comes further equipped with vandal resistant pins to prevent the unit from turning.

Dimensions: Bottom of flange to top is 6-1/2"; flange diameter is 2".
Haws manufactures drinking fountains, electric water coolers and electric drinking fountains to be lead-free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act. This product meets ADA requirements, and is compliant to California Health and Safety Code 116875 (AB 1953-2006).

Model 5054EG Product Details

Model 5054EG is a polished, chrome-plated lever handle bubbler valve, self-contained with integral stream flow regulation; integral chrome-plated brass basin shank; 1/2" O.D. slip joint supply, EnviroGard™ bubbler with water activated stainless steel canopy designed to provide enduring, sanitary service. When installed properly, this drinking faucet meets the requirements of the Americans with Disabilities Act. It requires less than 5 pounds push to operate. Vandal-resistant pins prevent turning of fixture. Designed for deck or sink mounting. Dimensions: bottom of flange to bubbler orifice, 3-1/8"; shank diameter 13/16".

Drinking faucet includes: basin shank, locking pins, and valve mounting hardware.

Haws manufactures drinking fountains, electric water coolers and electric drinking fountains to be lead-free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65 and the Federal Safe Drinking Water Act. This product meets ADA requirements, and is compliant to California Health and Safety Code 116875 (AB 1953-2006).

Model 5054LF Product Details

Model 5054LF drinking faucet is designed with a shielded bubbler and self-closing lever handle valve with pressure regulating flow control to provide an anti-squirt drinking stream. Unit is to be mounted from a sink or counter top and is constructed from lead-free polished chrome-plated brass, making this bubbler valve resistant to corrosive materials and easy too keep clean.

Drinking faucet includes: basin shank, locking pins, and valve mounting hardware.
Dimensions: 2" high forged brass bubbler head with a 1/2" inlet and shank with a 13/16" thread size.
Haws manufactures drinking fountains, electric water coolers and electric drinking fountains to be lead-free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act. This product meets ADA requirements, and is compliant to California Health and Safety Code 116875 (AB 1953-2006).

Model 5057LF Product Details

Model 5057LF drinking faucet is designed with a shielded bubbler and self-closing lever handle valve with adjustable stream regulation to provide an anti-squirt drinking stream. Unit is to be mounted horizontally over separate catch basin and is constructed from lead-free polished chrome-plated brass, making this bubbler valve resistant to corrosive materials and easy too keep clean. Unit comes further equipped with in-line strainer to protect against contaminates.

Dimensions: 8" in overall length for the faucet, 4" wide, 5-1/2" high, and the connection is a 1/2" IPS inlet.
Haws manufactures drinking fountains, electric water coolers and electric drinking fountains to be lead-free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act. This product meets ADA requirements, and is compliant to California Health and Safety Code 116875 (AB 1953-2006).

Model 5060LF Product Details

Model 5060LF drinking faucet is designed with a shielded bubbler and self-closing lever handle valve with adjustable stream regulation to provide an anti-squirt drinking stream. Unit is to be mounted vertically on 1/2"IPS pipe and is constructed from lead-free polished chrome-plated brass, making this bubbler valve resistant to corrosive materials and easy too keep clean. Unit comes further equipped with in-line strainer to protect against contaminants.

Connection is 1/2" IPS inlet.
Haws manufactures drinking fountains, electric water coolers and electric drinking fountains to be lead-free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act. This product meets ADA requirements, and is compliant to California Health and Safety Code 116875 (AB 1953-2006).

Model 5452LF Product Details

Model 5452LF gooseneck faucet is designed with a 2.2 gpm flow control and self-closing lever handle action to provide a smooth flowing stream of water. Unit is to be mounted from sink or counter top and is constructed from lead-free polished chrome-plated brass, making this faucet resistant to corrosive materials and easy too keep clean.

Dimensions: Center supply to center spout outlet is 4-1/2", bottom of flange to extreme top of faucet is 10-3/8", bottom of flange to spout outlet is 6-3/16", flange diameter is 2", shank diameter is 13/16". Connection is a 1/2" IPS inlet.
Haws manufactures drinking fountains, electric water coolers and electric drinking fountains to be lead-free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006).

Model 5510LF Product Details

Model 5510LF compression gooseneck faucet is designed with a 2.2 gpm flow control and stay-open lever handle action to provide a smooth flowing stream of water. Unit is to be mounted from sink or counter top and is constructed from lead-free polished chrome-plated brass, making this faucet resistant to corrosive materials and easy to keep clean.

Gooseneck faucet incorporates: renewable seat, mounting pin to prevent base from turning, aerator with key, and integral basin shank.
Dimensions: Center supply to center spout outlet is 4-1/2", bottom of flange to extreme top of faucet is 10-3/8", bottom of flange to spout outlet is 6-3/16", and flange diameter is 2". Connection is a 1/2" IPS inlet.
Haws manufactures drinking fountains, electric water coolers and electric drinking fountains to be lead-free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006).

Model 5530LF Product Details

Model 5530LF compression gooseneck faucet is designed with a 2.2 gpm flow control and stay-open lever handle action to provide a smooth flowing stream of water. Unit is to be mounted from sink or counter top and is constructed from heavy-duty, lead-free, polished chrome-plated brass. Making this faucet extra sturdy, resistant to corrosive materials, and easy too keep clean.

Lever handles allow the faucet to distribute both hot and cold streams of water.
Gooseneck faucet incorporates: renewable seat, dual indexed red and blue lever handles, mounting pin to prevent base from turning, aerator with key, and integral basin shank with supply yoke.
Dimensions: Center supply to center spout outlet is 4-1/2", bottom of flange to extreme top of faucet is 10-1/2", bottom of flange to spout outlet is 6-3/16", flange diameter is 2", max deck thickness is 1-1/2", and center to center of inlets is 4-7/16". Connection is a 1/2" IPS inlet.
Haws manufactures drinking fountains, electric water coolers and electric drinking fountains to be lead-free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006).

Model 5551 Product Details

Model 5551 glassfiller faucet is designed with a self-closing lever handle valve to control the flow of the cold stream of water. Unit is to be mounted from sink or counter top and is constructed from a lead-free polished chrome-plated brass. Making this bubbler valve resistant to corrosive materials and easy too keep clean.

Dimensions: Bottom of flange to spout outlet is 8-1/8"; flange diameter is 1-1/4"; and c-supply to c-spouts 1-11/16". Connection is a 3/8" IPS inlet.
Haws manufactures drinking fountains, electric water coolers and electric drinking fountains to be lead-free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006).

Model 5830LF Product Details

Model 5830LF is a polished chrome-plated, lead-free brass lever handle, self-closing valve. Features screwdriver adjustment stream control. 1/2" NPT(F) inlet by 1/4" NPT(F) outlet. Haws manufactures drinking fountains, electric water coolers and electric drinking fountains to be lead-free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006).

Model 5851LF Product Details

Model 5851LF is a panel mounted valve, self-closing, polished, chrome-plated, vandal-resistant lever handle with rough brass body. Dimensions: wall thickness maximum, 1"; size of hole required, 1-1/16" diameter. 3/8" NPT(F) inlet and outlet. Replaces Models 5855 and 5856.

Haws manufactures drinking fountains, electric water coolers and electric drinking fountains to be lead-free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65 and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006).

Model 5851LFHST Product Details

Model 5851LFHST handle and stem assembly includes a PCP handle cap, nylon lock nut, nylon and brass thrust washers, stainless steel wave washer, PCP lever handle with set screw, bearing set, bonnet cap, bonnet washer, gland packing, gland, spring washer, spring, seat washer, screw, seat washer, renew seat and a seat o-ring. Used on models made in 2005 and newer. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006).

Model 5871 Product Details

Often times it’s beneficial to understand how components, like the 5871 Haws valve, contribute to the effective functioning of our drinking fountains. Rough lead free brass design provide the required amount of durability needed to make Haws fountains, produced between January 1982 to April 1991, function efficiently day in and day out.

Connection is1/4" IPS inlet and outlet along with floating ball seal.
Note: Push button assembly not included.

Model 5872 Product Details

Often times it’s beneficial to understand how components, like the 5872 Haws valve, contribute to the effective functioning of our drinking fountains. Valve is easily adjustable, making adjustments quick and simple. Body is manufactured of glass filled Celcon.

Valve is push button activated and comes equipped with automatic diaphragm pressure regulator to allow the valve to function under varying water pressures between 20-90 PSI; keeping the stream constant throughout the drinking process.
Connection is 1/4" IPS inlet and outlet.
Note: Discontinued on October 3, 2003 and replaced by Model 5874. Unit may still be available as a replacement part.
Haws Co. manufactures drinking fountains, electric water coolers and electric drinking fountains to be lead-free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006).

Model 5872HF Product Details

Often times it’s beneficial to understand how components, like the 5872HF Haws valve, contribute to the effective functioning of our higher flowing drinking fountains. Valve is easily adjustable, making adjustments quick and simple. Body is manufactured of glass filled Celcon.

Valve is push button activated and comes equipped with automatic diaphragm pressure regulator to allow the valve to function under varying water pressures between 20-90 PSI; keeping the stream constant throughout the drinking process.
Specifically designed for fountains requiring higher water flows such as cuspidor units.
Connection is 1/4" IPS inlet and outlet.
Haws Co. manufactures drinking fountains, electric water coolers and electric drinking fountains to be lead-free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006).

Model 5874PB, patented* lead-free stainless steel, push activated valve, front accessible for stream adjustment and servicing, replaceable pressure regulation control cartridge. Includes PBA7 recessed style push button assembly. (*Patent No. 6,981,692).

Model 5874PB Product Details

Often times it’s beneficial to understand how components, like the 5874PB Haws valve and push button assembly, contribute to the effective functioning of our drinking fountains. Patented lead-free stainless steel design and chrome-plated brass push button provide the required amount of durability needed for constant day after day use. Valve is fully front adjustable for maintenance ease.

Valve and push button come equipped with automatic pressure regulation to allow the valve to function under varying water pressures between 30-90 PSI; keeping the stream constant throughout the drinking process.
Front stream adjustment and cartridge serviceability make this valve easy serviced.
Connection is 1/4" IPS inlet and outlet
Note: Valve assembly includes: push button assembly, tubing, and spanner wrench. Assembly is to be used on all recessed wall mounted fountains produced after October 3, 2003. Unit replaced Model 5872.
(Patent No. 6,981,692).
Haws Co. manufactures drinking fountains, electric water coolers and electric drinking fountains to be lead-free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006).

Model 5874PBF, patented* lead-free stainless steel, push activated valve, front accessible for stream adjustment and servicing, replaceable pressure regulation control cartridge. Includes PBA6 flush mounted style push button assembly. (*Patent No. 6,981,692).

Model 5874PBF Product Details

Often times it’s beneficial to understand how components, like the 5874PBF Haws valve and push button assembly, contribute to the effective functioning of our drinking fountains. Patented lead-free stainless steel design and chrome-plated brass push button provide the required amount of durability needed for constant day after day use. Unit is fully adjustable as well.

Valve and push button come equipped with automatic pressure regulation to allow the valve to function under varying water pressures between 30-90 PSI; keeping the stream constant throughout the drinking process.
Front stream adjustment and cartridge serviceability make this valve easy serviced.
Connection is 1/4" IPS inlet and outlet
Note: Valve assembly includes: push button assembly, tubing, and spanner wrench. Assembly is to be used on all drinking fountains with flush mounted push buttons produced after October 3, 2003. Unit replaced Model 5872.
(Patent No. 6,981,692).
Haws Co. manufactures drinking fountains, electric water coolers and electric drinking fountains to be lead-free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006).

Model 5874SS Product Details

Often times it’s beneficial to understand how components, like the 5874SS valve, contribute to the effective functioning of our drinking fountains. Stainless steel design provides the required amount of durability needed for constant day after day use. Valve is fully front adjustable for maintenance ease.

Valve is push button activated and comes equipped with automatic pressure regulation to allow the valve to function under varying water pressures between 30-90 PSI; keeping the stream constant throughout the drinking process.
Connection is 1/4" IPS inlet and outlet.
Note: Push button assembly not included. Spanner wrench is included.
Haws Co. manufactures drinking fountains, electric water coolers and electric drinking fountains to be lead-free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006).

Model 5881 Product Details

Often times it’s beneficial to understand how components, like the 5881 Haws air activated valve, contribute to the effective functioning of our drinking fountains. Housing is divided into two separate portions so the activating valve control is completely separate from the water passing through the unit. As a result, the air valve is easily maintained, maximizing efficiency.

In line mesh Y-strainer protects from contaminates, ensuring the passing water is filtered.
Air valve is to be used on all Haws freeze-resistant drinking fountains.
Connection is 1/2" IPS inlet and outlet
Note: Push button assembly and flow control not included.
Haws Co. manufactures drinking fountains, electric water coolers and electric drinking fountains to be lead-free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006).

Model 6235 Product Details

Model 6235 is a chrome-plated, ADA compliant, self-closing, lever operated bib faucet mounted on pedestal access door with protective housing. Available on the 3500 series drinking fountains. Bib is not freeze-resistant. When installed on FR models a separate water supply must be provided and bib must be winterized during freezing conditions.

Model 6235LD Product Details

Model 6235LD is a chrome-plated, ADA compliant, self-closing, lever operated bib faucet mounted on pedestal access door with protective housing with lockable door. Ideal for filling bottles and jugs. Available on the 3500 series drinking fountains. Bib is not freeze-resistant. When installed on FR models a separate water supply must be provided and bib must be winterized during freezing conditions.

Model 6236 Product Details

Model 6236 is a chrome-plated wheel handled operated compression hose bib with vacuum breaker mounted on pedestal access door with protective housing. Available on the 3500 series drinking fountains. Bib is not freeze-resistant. When installed on FR models a separate water supply must be provided and bib must be winterized during freezing conditions.

Model 6236LD Product Details

Model 6236LD is a chrome-plated wheel, handle operated compression hose bib with vacuum breaker mounted on pedestal access door with protective housing and lockable door. Available on the 3500 series drinking fountains. Bib is not freeze-resistant. When installed on FR models a separate water supply must be provided and bib must be winterized during freezing conditions.

Model 6250LF Product Details

Model 6250LF bib faucet is designed with a self-closing lever action, extension nipple, and tee to precisely control water flow. Combining the constructed lead-free brass, with polished chrome-plated finish, this faucet is sure to last.

Connection is 1/2" IPS inlet.
Haws Co. manufactures drinking fountains, electric water coolers and electric drinking fountains to be lead-free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006).

Model 6252EHLF Product Details

Model 6252EHLF bib faucet is designed with a self-closing lever action and requires less then 3.5 pounds to activate, easily operable by the handicapped. Combining the lead-free design, with a rough brass finish, this faucet is built to last in outdoor environments. Unit also comes equipped with extended lever handle for ease of use.

Connection is 1/2" IPS inlet.
Haws Co. manufactures drinking fountains, electric water coolers and electric drinking fountains to be lead-free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006).

Model 6275 Product Details

Model 6275 compression hose bib faucet is designed to activate through a turn knob on the top of the unit. Combining the lead-free design, with a rough chrome plated finish, this faucet is built to last in outdoor environments. Unit also comes equipped with extended shank for ease of use.

Bib faucet incorporates a vacuum breaker, and includes a stainless steel mounting plate, mounting screws, check valve, supply fittings, and tee.
Connection is 3/4" male hose thread x 1/2" IPS inlet.

Model 6518.2FR Product Details

The Haws 6518.2FR freeze-resistant valve system is a fully engineered pneumatic operated valve for use on all Haws ‘Hi-Lo’ two bubbler freeze-resistant pedestal fountains. The placement of the valve below the frost line allows the system to function when freezing conditions are present at surface level. Its fully accessible design allows for reliable service year round.(For high water tables, see Haws model 6519FR)

Installed below the frost line, the valve remains fully functional under the worst of weather conditions, with the fountain remaining functional as well.
If a maintenance issue ever arises, rest assured that the valve assembly is easily removed and replaced without disrupting the remainder of the fountain.
Unit is applicable for dual pedestal mounted fountain designs.

Haws Co. manufactures drinking fountains, electric water coolers, and electric drinking fountains to be lead-free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006).

Model 6518FR Product Details

The Haws 6518FR freeze-resistant valve system is a fully engineered pneumatic operated valve for use on all Haws single bubbler freeze-resistant pedestal fountains. The placement of the valve below the frost line allows the system to function when freezing conditions are present at surface level. Its fully accessible design allows for reliable service year round. (For high water tables, see Haws model 6519FR)

Installed below the frost line, the valve remains fully functional under the worst of weather conditions, with the fountain remaining functional as well.The Haws 6518FR freeze-resistant valve system is a fully engineered pneumatic operated valve for use on all Haws single bubbler freeze-resistant pedestal fountains. The placement of the valve below the frost line allows the system to function when freezing conditions are present at surface level. Its fully accessible design allows for reliable service year round.The Haws 6518FR freeze-resistant valve system is a fully engineered pneumatic operated valve for use on all Haws single bubbler freeze-resistant pedestal fountains. The placement of the valve below the frost line allows the system to function when freezing conditions are present at surface level. Its fully accessible design allows for reliable service year round.
Installed below the frost line, the valve remains fully functional under the worst of weather conditions, with the fountain remaining functional as well.
If a maintenance issue ever arises, rest assured that the valve assembly is easily removed and replaced without disrupting the remainder of the fountain.
Unit is applicable for single pedestal mounted fountain designs.

Haws Co. manufactures drinking fountains, electric water coolers, and electric drinking fountains to be lead-free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006).

Model 6519FR Freeze-Guard™; patented freeze-resistant push-button operated valve system. Fully enclosed system collects drained back supply water into water-tight reservoir located below the frost line. Collected water is then expelled into fountain waste system with the next operation of valve. Designed for areas with high water table, poor drainage or surface flooding. Assembly can be lifted to surface for maintenance without disturbing the fountain.

Model 6519FR Product Details

The Haws 6519FR Freeze-Guard™ patented freeze-resistant valve system is specially designed for areas with a high water table, poor drainage, or surface flooding. This fully engineered pneumatic operated valve is intended for use on all Haws single bubbler freeze-resistant pedestal fountains. The placement of the valve below the frost line allows the system to function when freezing conditions are present at surface level. Its fully accessible design allows for reliable service year round.

Installed below the frost line, the valve remains fully functional in freezing areas with a high water table, poor drainage, or surface flooding.
If a maintenance issue ever arises, rest assured that the valve assembly comes equipped with quick disconnect to easily remove and replace the unit without disrupting the remainder of the fountain.
Unit is applicable for single pedestal mounted fountain designs.
Freeze-Guard is a patented name by Haws Corporation. Patent #6,000,780.

Haws Co. manufactures drinking fountains, electric water coolers, and electric drinking fountains to be lead-free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006).

Priced Separately, Model 6521FR, fully engineered system with pneumatic operated valve installed on the inside wall where room temperature does not drop below 50°F. When valve goes to off position, water left in supply line between valve and bubbler drains back into waste inside cabinet. Allows fountain on outside to function year-round.

Model 6521FR Product Details

The Haws 6521FR freeze-resistant valve system is a fully engineered pneumatic operated valve for use on all Haws single bubbler wall mounted freeze-resistant fountains. The placement of the valve on an interior wall where the ambient temperature minimum is 50°F allows the system to function when freezing conditions are present at the fountain outside the wall. Its fully accessible design allows for reliable service year round.

Installed in an area where the temperature remains at a minimum of 50°F, this unit will assist the fountain in remaining fully functional in freezing conditions.
If a maintenance issue ever arises, rest assured that the valve system is easily accessed, making troubleshooting simpler.
Unit is applicable for single bubbler wall mounted freeze-resistant fountain designs.

Haws Co. manufactures drinking fountains, electric water coolers, and electric drinking fountains to be lead-free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006).